IBM Support

PI97400: DEBUG TOOL 13.1 SERVICE

A fix is available

Subscribe

You can track all active APARs for this component.

APAR status

  • Closed as program error.

Error description

  • --- Service ---
    
    -If an IMS Region with the IMS Transaction Isolation
     customization is not running, then if DTU option 4.5 is run
     4  IMS TM Debugging
       5  IMS Transaction Isolation
     then EQANIPSB ABENDS0C4 at offset x'4BA' is possible.
     (PI94265 at 14.1)
     (PI89826 at 13.1)
    
    -ABEND in EQARCL4+'116AB4'x during COBOL V5+.
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
     (PI96490 at 13.1)
    
    -Debug Tool - DB2 stored procedure debugging in Code Coverage
     (CC) mode : &&USERID in EQAOPTS is resolved to WLM STC USER
     ID.
     (PI92966 at 13.1)
    
    -Remote Debug: Can not set breakpoint in composite assembler
     module for inactive compile unit.
     (PI92358 at 14.1)
    
    -IMS ABEND after activating transaction isolation exits.  After
     activated transaction isolation IMS ABENDs with U4095,
     emergency restart was not possible. Sysprogs removed exits,
     then emergency restart was possible.
     (PI94265 at 14.1)
    
    -In z/OS Debugger it is possible to configure in EQASTART a
     different dataset name for SEQATLIB. This definition is not
     used in IMS Transaction Isolation REXX EQAXTIMS.
     (PI95089 at 14.1)
    
    -EQANICRT does not handle creating lots of resource
     definitions.
     (PI97564 at 13.1)
    
    -IMS Isolation private MPR should use debug userid for
     substitution.
     (PI97562 at 14.1)
    
    -Under some conditions, IMS Transaction Isolation is unable to
     find a region to clone if the transaction has an ENQCT >=
     10000.
    
    -ABENDS0C4 EQA0YCUS+x'16F8'- Remote Debug Enterprise PLI side
     file reset during termination.
     (PI97595 at 13.1)
    
    -ABENDS0C4 EQA0SBKP+'7122'x - Remote Debug adding breakpoint
     after deleting breakpoint.
     (PI97845 at 14.1)
    
    -Message EQAZ182W not correct, because region had abended in
     IMS Transaction Isolation.
     (PI98127 at 13.1)
    
    -Debugger abends with ABENDS0C4 in EQA30TK+x'3AA4'. COBOL V5
     incorrect source in source window.
     (PI99179 at 14.1)
    
    -Abend at CEEEV006.DFH3QSS+x'02AE' when CICS starts up. Caused
     by bad ALET in AR3 from DIAG TRAP IEAINITREGSTASK.
     (PI98733 at 13.1)
    
    -COBOL V5 sub pgm source not displayed the second time called
     in CICS at nested link level.
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
     (PH00402 at 14.1)
    
    -When using DTU panel 4.6 to reserve more classes for IMS
     Transaction Isolation, the selected classes are not reserved
     for IMS Transaction Isolation.
     (PH01553 at 13.1)
    
    --- End Service ---
    

Local fix

Problem summary

  • ****************************************************************
    * USERS AFFECTED:                                              *
    * Debug Tool 13.1 users who have the problems described in the *
    * Problem Description.                                         *
    ****************************************************************
    * PROBLEM DESCRIPTION:                                         *
    * --- Service ---                                              *
    *                                                              *
    * -If an IMS Region with the IMS                               *
    *  Transaction Isolation customization                         *
    *  is not running, then if DTU option                          *
    *  4.5 is run                                                  *
    *  4  IMS TM Debugging                                         *
    *    5  IMS Transaction Isolation                              *
    *  then EQANIPSB ABENDS0C4 at offset                           *
    *  x'4BA' is possible.                                         *
    *  (PI94265 at 14.1)                                           *
    *  (PI89826 at 13.1)                                           *
    *                                                              *
    * -ABEND in EQARCL4+'116AB4'x during                           *
    *  COBOL V5+.                                                  *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    *  (PI96490 at 13.1)                                           *
    *                                                              *
    * -Debug Tool - DB2 stored procedure                           *
    *  debugging in Code Coverage (CC) mode                        *
    *  : &&USERID in EQAOPTS is resolved to                        *
    *  WLM STC USER ID.                                            *
    *  (PI92966 at 13.1)                                           *
    *                                                              *
    * -Remote Debug: Can not set breakpoint                        *
    *  in composite assembler module for                           *
    *  inactive compile unit.                                      *
    *  (PI92358 at 14.1)                                           *
    *                                                              *
    * -IMS ABEND after activating                                  *
    *  transaction isolation exits.  After                         *
    *  activated transaction isolation IMS                         *
    *  ABENDs with U4095, emergency restart                        *
    *  was not possible. Sysprogs removed                          *
    *  exits, then emergency restart was                           *
    *  possible.                                                   *
    *  (PI94265 at 14.1)                                           *
    *                                                              *
    * -In z/OS Debugger it is possible to                          *
    *  configure in EQASTART a different                           *
    *  dataset name for SEQATLIB. This                             *
    *  definition is not used in IMS                               *
    *  Transaction Isolation REXX EQAXTIMS.                        *
    *  (PI95089 at 14.1)                                           *
    *                                                              *
    * -EQANICRT does not handle creating                           *
    *  lots of resource definitions.                               *
    *  (PI97564 at 13.1)                                           *
    *                                                              *
    * -IMS Isolation private MPR should use                        *
    *  debug userid for substitution.                              *
    *  (PI97562 at 14.1)                                           *
    *                                                              *
    * -Under some conditions, IMS                                  *
    *  Transaction Isolation is unable to                          *
    *  find a region to clone if the                               *
    *  transaction has an ENQCT >= 10000.                          *
    *                                                              *
    * -ABENDS0C4 EQA0YCUS+x'16F8'- Remote                          *
    *  Debug Enterprise PLI side file reset                        *
    *  during termination.                                         *
    *  (PI97595 at 13.1)                                           *
    *                                                              *
    * -ABENDS0C4 EQA0SBKP+'7122'x - Remote                         *
    *  Debug adding breakpoint after                               *
    *  deleting breakpoint.                                        *
    *  (PI97845 at 14.1)                                           *
    *                                                              *
    * -Message EQAZ182W not correct, because                       *
    *  region had abended in IMS Transaction                       *
    *  Isolation.                                                  *
    *  (PI98127 at 13.1)                                           *
    *                                                              *
    * -Debugger abends with ABENDS0C4 in                           *
    *  EQA30TK+x'3AA4'. COBOL V5 incorrect                         *
    *  source in source window.                                    *
    *  (PI99179 at 14.1)                                           *
    *                                                              *
    * -Abend at CEEEV006.DFH3QSS+x'02AE'                           *
    *  when CICS starts up. Caused by bad                          *
    *  ALET in AR3 from DIAG TRAP                                  *
    *  IEAINITREGSTASK.                                            *
    *  (PI98733 at 13.1)                                           *
    *                                                              *
    * -COBOL V5 sub pgm source not displayed                       *
    *  the second time called in CICS at                           *
    *  nested link level.                                          *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    *  (PH00402 at 14.1)                                           *
    *                                                              *
    * -When using DTU panel 4.6 to reserve                         *
    *  more classes for IMS Transaction                            *
    *  Isolation, the selected classes are                         *
    *  not reserved for IMS Transaction                            *
    *  Isolation.                                                  *
    *  (PH01553 at 13.1)                                           *
    *                                                              *
    * --- End Service ---                                          *
    ****************************************************************
    * RECOMMENDATION:                                              *
    * Installations that need these problem fixes should install   *
    * this service.                                                *
    ****************************************************************
    Miscellaneous service.
    

Problem conclusion

  • Problems resolved.
    

Temporary fix

Comments

APAR Information

  • APAR number

    PI97400

  • Reported component name

    DEBUG TOOL Z/OS

  • Reported component ID

    5655Q1000

  • Reported release

    D10

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    YesHIPER

  • Special Attention

    NoSpecatt / Xsystem

  • Submitted date

    2018-04-30

  • Closed date

    2018-08-29

  • Last modified date

    2018-09-04

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UI58212 128AC7Ÿ

Modules/Macros

  • EQA00BKP EQADCCN0 EQAXMSGT EQA03STT EQA04PST EQA10XSC EQA00OEH
    EQA00OEI EQA03PFM EQA0SBKP EQARCPDC EQARCOBD EQA00GDV EQA05BLK
    EQA08CUS EQA00CUS EQA00CEE EQA00LNG EQARCEXP EQA0YCUS EQA00EHI
    EQA00CTX EQA00GDD EQA00VAR EQARCHEX EQA00GDF EQA00GDG EQA08STT
    EQA08PFM EQA00GLV EQARCCDA EQA00GDP EQA00STT EQA00STU EQA00CCV
    EQA00CCX EQA10PRC EQA00FRE EQA00NAM EQA05CUS EQA0SUT1 EQA00EHB
    EQA02BLK EQA00GTO EQA0SXR1 EQATIEXT EQA0SEXN EQA0XCUS EQA00NML
    EQA0OIP2 EQAXTIMS EQA02PST EQA00QSS EQA00REG EQA00GFU EQA00GFV
    EQA03BLK EQA07PST EQA10MVS EQA00RSV EQA00CEX EQA0AIP2 EQA0AIP1
    EQA0SRSM EQA00CND EQAAFSPS EQA10DTL EQA08BLK EQA0SDU  EQA03CUS
    EQA00BLK EQA00CVT EQA00SET EQA00ABE EQA00AEI EQA04CMS EQA0SDLD
    EQA0SDTL EQA07STT EQA00HKN EQA08PST EQA00DCL EQA00LST EQA00HKS
    EQA00PST EQA0SRPC EQA00DTC EQA00LBL EQA00DSF EQA0SLDD EQA00PBK
    EQA00OHT EQAPMPSL EQAEV006 EQANBSWT EQA00CIC EQA00OHV EQA00LSE
    EQA04CUS EQA0SRQ1 EQA00EMG EQA0SRQ2 EQA0SRQ3 EQA0SXU1 EQA0SRQ4
    EQA00AEH EQARCI3E EQA00DBG EQA00DBH EQA00OHC EQA05PST EQA00DBI
    EQA00DBJ EQARCTRC EQA04STT EQA00OHH EQA0SQFY EQA04PFM EQA04API
    EQA00LIS EQASUJCL EQA00GPA EQA00LAM EQA0SCHG EQA03ASN EQA0SEXA
    EQA00LRC EQA00RES EQA00CHG EQA0SXUT EQA00DEH EQA00DEI EQA00GSV
    EQA00FIN EQA00EH2 EQA05STT EQA00EXE EQA00LMS EQA0SCL2 EQA0SCL1
    EQA05PFM EQA0SCPU EQA00QNS EQA02PFM EQADCXXT EQA0SUTI EQA0SDBI
    EQA00PDM EQARCDBG EQA07BLK EQANICRT EQA0SXRI EQA00DU  EQA02LOC
    EQAD3XXT EQA02CUS EQAYSMMN EQARCVND EQA00QFY EQA0CINF EQA0SCBP
    EQA00LDD EQA00TTL EQA03PST EQA00INT EQANIPSB EQA02STT EQARCL4
    EQA00MEM EQA00LCM EQA00EVH EQA0SBPP EQA07CUS EQA00DLD EQA00DTL
    EQALMA   EQA0STKH EQA00CV  EQA04BLK EQA00ANL EQA0SRP1 EQA0SRP2
    EQA0SRP3 EQA00BPP EQA0SLCM EQA0SRP4 EQA00LLC EQA00RPB EQA00GIV
    

Fix information

  • Fixed component name

    DEBUG TOOL Z/OS

  • Fixed component ID

    5655Q1000

Applicable component levels

  • RD10 PSY UI58212

       UP18/09/01 P F808 ¢

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.



Document information

More support for: Debug Tool for z/OS

Software version: D10

Reference #: PI97400

Modified date: 04 September 2018