IBM Support

PI92804: SERVICE FOR Z/OS DEBUGGER 14.0.

A fix is available

Subscribe

You can track all active APARs for this component.

APAR status

  • Closed as program error.

Error description

  • z/OS Debugger service for
    IBM Developer for z Systems 14.0.0.7
     IBM Debug for z Systems 14.0.0.7
    
    --- Service ---
    
    -Exception in EQA00ANC with Smart/Restart.
     (PI56113 at 13.1)
    
    -If an IMS Region with the IMS Transaction Isolation
     customization is not running, then if DTU option 4.5 is run
     4  IMS TM Debugging
       5  IMS Transaction Isolation
     then EQANIPSB ABENDS0C4 at offset x'4BA' is possible.
     (PI94265 at 14.1)
     (PI89826 at 13.1)
    
    -The output from EQANICRT for the stage-1 input macros is
     incorrect.
     (PI89515 at 13.1)
    
    -When using Debug Tool with SET EXPLICITDEBUG ON, unable to
     view content variables in automonitor of a second Enterprise
     COBOL V6.1 submodule that is called from a Enterprise COBOL
     V4.2 main module.
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
     (PI89795 at 13.1)
    
    -ABENDS0C4 in Debug Tool module EQA00TMM caused ABENDS0C4 in
     IMS MPR, which in turn caused IMS Control Region to abend with
     U113.
     EQA00TMM gets control for an STIMERM exit. Debug Tool is not
     active when the exit call is made by the Operating System.
     Debug Tool must have been active when the STIMERM SVC was
     issued, but out of the picture when the exit was called.
     Messages include:
     DFS0613I CTL RGN U113 DUE TO S0C4 U0000 DURING DL/I CALL IN
     MPP
     (PI90265 at 13.1)
    
    -ABENDU4088 in assembler session caused by large variable size
     and smaller STACK init size.
     (PI91762 at 13.1)
    
    -"AT ENTRY entryName" in the remote debugger may not set entry
     breakpoint as expected when the load module has an alias name.
    
    -IMS Transaction Isolation ABEND in IWXMSCTE due to DSA
     overlay.  The exit sharing code in EQATIEXT isn't properly
     saving and restoring its DSA around calls to the client's
     DFSMSCE0 exit points.
     (PI93453 at 13.1)
    
    -The JCL analyzer fails to resolve all substitution symbols in
     DD cards, if the DD cards override a DD in the invoked PROC.
    
    -If a DTU user's job card from DTU option 0 contains JES2
     control statements, the resulting private MPR JCL is not
     formatted correctly when the user performs the START action on
     DTU 4.5.  For example, the following DTU 0 input:
    
     //USRT001Z JOB MSGLEVEL=(1,1),
     //   TIME=1440,MSGCLASS=H,NOTIFY=&SYSUID.
     /*JOBPARM SYSAFF=*
     //*
    
     Will result in the following job card:
    
     //USRT001Z JOB CLASS=A,MSGCLASS=H,MSGLEVEL=(1,1),
     // NOTIFY=&SYSUID.JOBPARMSYSAFF=*,REGION=0M,TIME=1440
    
    -LMA (Load Module Analyzer) does not show COMPOPTS or valid
     LEINFO for COBOL V2/V3/V4  CSECTS if COBOL V5/V6 CSECTS are in
     the same program object.  The problem is related to how the
     C_CODE and B_TEXT segments are ordered in the program object.
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
     (PI94034 at 13.1)
    
    -Debug Tool not starting up in remote debug session when using
     delay debug.  EQA9999W - FeName=EQACSMTP Loc=230 Func=SHUTDO
     Rc=-1 Fc=10108
     (PI82494 at 13.1)
    
    -STC Userid used in IMS CC scenario instead of Userid
     associated with the transaction.
     CCOUTPUT will show Userid which started the IMS region and not
     the Userid running the transaction.
     (PI95556 at 13.1)
    
    -STEP OVER a PERFORM statement not working for COBOL V5+
     programs in Debug Tool.
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
     (PI95699 at 13.1)
    
    -ABEND in EQARCL4+'116AB4'x during Enterprise COBOL V5+ debug
     session.
    
     FIXCAT KEYWORD:
     COB0501T/K COB0502T/K COB0601T/K COB0602T/K
    
     (PI96490 at 13.1)
    
    -DTU option 2 Debug Tool Setup File (and others that process
     JCL via the JCL Analyzer, EQASUJCL):
    
      - When processing JCL which contains a CONTROL-M statement,
        an error message like
    
         CEE0454S The message number 1026 could not be found for
         facility ID EQA.
    
        could be issued, and the JCL is not processed.
    
      - When processing JCL which contains no JOB card, an error
        message like
    
        CEE3204S The system detected a protection exception (System
        Completion Code=0C4).  From entry point DMHGetMessage at
        compile unit offset +0000011C at entry offset +0000011C at
        address 2AD3F8DC
    
        could be issued, and the JCL is not processed.
    
     (PI96647 at 13.1)
    
    -Under some conditions, IMS Transaction Isolation is unable to
     find a region to clone if the transaction has an ENQCT >=
     10000.
    
    -In IBM Developer for z Systems (IDz) and IBM z/OS Debugger
     v14.0, source code is not displayed when debugging a COBOL
     program using menu Debug As > MVS Batch Application.
     (This is the host part of PI87786 at 14.0. PI87786 is against
     5724T0700.  This fix requires the client IDz 14.0.0.7).
     (PI87786 at 14.0)
    
    -When using standard mode, when a source file is moved after
     compilation, and the user indicates the new source file
     location to the debugger, the file name in the editor view
     will now show the new source location instead of the original
     source location.  This is for C, C++, Enterprise PL/I, and
     Enterprise COBOL V6.2 when using "Show Source" instead of the
     default "Show Expanded Source".
    
     FIXCAT KEYWORD:
     COB0602T/K
    
     (PI94033 at 14.0)
    
    -IBM z/OS Debugger v14 Code Coverage for Debug Tool
     compatibility mode does not depict the last COBOL paragraph
     coverage correctly
     The last COBOL paragraph is depicted as 0 percent, but the
     lines depict it as green, and the program is covered at 100%.
     It works for standard mode.
     (PI91504 at 14.0)
    
    -No Code Coverage report regenerated in z/OS Debugger v14.0
     running in standard mode if job ABENDs.
     (PI90554 at 14.0)
    
    -ABENDS0C1 in EQA00OHV+'8B2'x with IBM z/OS Debugger.
     IBM z/OS Debugger v14.0.0 while debugging a CICS transaction
     in Debug Tool compatibility mode, several occurrences of the
     following error messages are observed:
     EQA00OHV: LookupHook_Rc_NoHK.
     EQA9999E:Unexpected hook-Cannot resume
     (PI90931 at 14.0)
    
    -z/OS Debugger V14.1 hangs when you disable LE condition
     breakpoints in standard mode.
     (PI91901 at 14.1)
    
    -Remote Debug: Can not set breakpoint in composite assembler
     module for inactive compile unit.
     (PI92358 at 14.1)
    
    -At RD/z levels 9.5.1.6, when debugging a COBOL V4 program some
     variables don't change after a MOVE statement.
    
     Example:
     In the Source program
    
     MOVE 'S' TO TEST
    
     When debugging the value of TEST is '0'
     instead of 'S' after the MOVE statement.
    
     (PI93777 at RD/z 9.5.1)
    
    -IMS ABEND after activating transaction isolation exits.
     After activated transaction isolation IMS ABENDs with U4095,
     emergency restart was not possible. Sysprogs removed exits,
     then emergency restart was possible.
     (PI94265 at 14.1)
    
    -In z/OS Debugger it is possible to configure in EQASTART a
     different dataset name for SEQATLIB. This definition is not
     used in IMS Transaction Isolation REXX EQAXTIMS.
     (PI95089 at 14.1)
    
    -Properly handle job card processing for the ID/z "Remote IMS
     Application with Isolation" debug launch.
    
    -IMS Transaction Isolation EQANICRT does not handle creating
     lots of resource definitions.  Job EQA.SEQASAMP(EQAWICRT) does
     not create the correct output for IMS TYPE2 commands or STAGE1
     input.
     For DD EQARESDS nothing is produced or sometimes partial
     output is produced.
     For DD EQATY2DS partial output is produced.
     (PI97564 at 13.1)
    
    -IMS Transaction Isolation private MPR should use debug userid
     for substitution.  The generic userid will not be recognized
     and used as &&userid pattern for substituting dataset name.
     (PI97562 at 14.1)
    
    -ABENDS0C4 EQA0YCUS+x'16F8'- Remote Debug Enterprise PLI side
     file reset during termination.
     (PI97595 at 13.1)
    
    -Message EQAZ182W not correct, because region had abended in
     IMS Transaction Isolation.
     (PI98127 at 13.1)
    
    -Debugger abends with ABENDS0C4 in EQA30TK+x'3AA4'.
     (PI99179 at 14.1)
    
    -Abend at CEEEV006.DFH3QSS+x'02AE' when CICS starts up. Caused
     by bad ALET in AR3 from DIAG TRAP IEAINITREGSTASK.
     (PI98733 at 13.1)
    
    --- End Service ---
    

Local fix

Problem summary

  • ****************************************************************
    * USERS AFFECTED:                                              *
    * z/OS Debugger 14.0 users who have the problems described in  *
    * the Problem Description.                                     *
    ****************************************************************
    * PROBLEM DESCRIPTION:                                         *
    * z/OS Debugger service for                                    *
    *  IBM Developer for z Systems 14.0.0.7                        *
    *  IBM Debug for z Systems 14.0.0.7                            *
    *                                                              *
    * --- Service ---                                              *
    *                                                              *
    * -Exception in EQA00ANC with                                  *
    *  Smart/Restart.                                              *
    *  (PI56113 at 13.1)                                           *
    *                                                              *
    * -If an IMS Region with the IMS                               *
    *  Transaction Isolation customization                         *
    *  is not running, then if DTU option                          *
    *  4.5 is run                                                  *
    *  4  IMS TM Debugging                                         *
    *    5  IMS Transaction Isolation                              *
    *  then EQANIPSB ABENDS0C4 at offset                           *
    *  x'4BA' is possible.                                         *
    *  (PI94265 at 14.1)                                           *
    *  (PI89826 at 13.1)                                           *
    *                                                              *
    * -The output from EQANICRT for the                            *
    *  stage-1 input macros is incorrect.                          *
    *  (PI89515 at 13.1)                                           *
    *                                                              *
    * -When using Debug Tool with SET                              *
    *  EXPLICITDEBUG ON, unable to view                            *
    *  content variables in automonitor of a                       *
    *  second Enterprise COBOL V6.1                                *
    *  submodule that is called from a                             *
    *  Enterprise COBOL V4.2 main module.                          *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    *  (PI89795 at 13.1)                                           *
    *                                                              *
    * -ABENDS0C4 in Debug Tool module                              *
    *  EQA00TMM caused ABENDS0C4 in IMS MPR,                       *
    *  which in turn caused IMS Control                            *
    *  Region to abend with U113.                                  *
    *  EQA00TMM gets control for an STIMERM                        *
    *  exit. Debug Tool is not active when                         *
    *  the exit call is made by the                                *
    *  Operating System.  Debug Tool must                          *
    *  have been active when the STIMERM SVC                       *
    *  was issued, but out of the picture                          *
    *  when the exit was called.                                   *
    *  Messages include:                                           *
    *  DFS0613I CTL RGN U113 DUE TO S0C4                           *
    *  U0000 DURING DL/I CALL IN MPP                               *
    *  (PI90265 at 13.1)                                           *
    *                                                              *
    * -ABENDU4088 in assembler session                             *
    *  caused by large variable size and                           *
    *  smaller STACK init size.                                    *
    *  (PI91762 at 13.1)                                           *
    *                                                              *
    * -"AT ENTRY entryName" in the remote                          *
    *  debugger may not set entry breakpoint                       *
    *  as expected when the load module has                        *
    *  an alias name.                                              *
    *                                                              *
    * -IMS Transaction Isolation ABEND in                          *
    *  IWXMSCTE due to DSA overlay.  The                           *
    *  exit sharing code in EQATIEXT isn't                         *
    *  properly saving and restoring its DSA                       *
    *  around calls to the client's DFSMSCE0                       *
    *  exit points.                                                *
    *  (PI93453 at 13.1)                                           *
    *                                                              *
    * -The JCL analyzer fails to resolve all                       *
    *  substitution symbols in DD cards, if                        *
    *  the DD cards override a DD in the                           *
    *  invoked PROC.                                               *
    *                                                              *
    * -If a DTU user's job card from DTU                           *
    *  option 0 contains JES2 control                              *
    *  statements, the resulting private MPR                       *
    *  JCL is not formatted correctly when                         *
    *  the user performs the START action on                       *
    *  DTU 4.5.  For example, the following                        *
    *  DTU 0 input:                                                *
    *                                                              *
    *  //USRT001Z JOB MSGLEVEL=(1,1),                              *
    *  //   TIME=1440,MSGCLASS=H,                                  *
    *  //    NOTIFY=&SYSUID.                                       *
    *  / *JOBPARM SYSAFF=*                                         *
    *                                                              *
    *  Will result in the following job                            *
    *  card:                                                       *
    *                                                              *
    *  //USRT001Z JOB CLASS=A,MSGCLASS=H,                          *
    *  // MSGLEVEL=(1,1),                                          *
    *  // NOTIFY=&SYSUID.JOBPARMSYSAFF=*,                          *
    *  // REGION=0M,TIME=1440                                      *
    *                                                              *
    * -LMA (Load Module Analyzer) does not                         *
    *  show COMPOPTS or valid LEINFO for                           *
    *  COBOL V2/V3/V4  CSECTS if COBOL V5/V6                       *
    *  CSECTS are in the same program                              *
    *  object.  The problem is related to                          *
    *  how the C_CODE and B_TEXT segments                          *
    *  are ordered in the program object.                          *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    *  (PI94034 at 13.1)                                           *
    *                                                              *
    * -Debug Tool not starting up in remote                        *
    *  debug session when using delay debug.                       *
    *  EQA9999W - FeName=EQACSMTP Loc=230                          *
    *  Func=SHUTDO Rc=-1 Fc=10108                                  *
    *  (PI82494 at 13.1)                                           *
    *                                                              *
    * -STC Userid used in IMS CC scenario                          *
    *  instead of Userid associated with the                       *
    *  transaction.                                                *
    *  CCOUTPUT will show Userid which                             *
    *  started the IMS region and not the                          *
    *  Userid running the transaction.                             *
    *  (PI95556 at 13.1)                                           *
    *                                                              *
    * -STEP OVER a PERFORM statement not                           *
    *  working for COBOL V5+ programs in                           *
    *  Debug Tool.                                                 *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    *  (PI95699 at 13.1)                                           *
    *                                                              *
    * -ABEND in EQARCL4+'116AB4'x during                           *
    *  Enterprise COBOL V5+ debug session.                         *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0501T/K COB0502T/K                                       *
    *  COB0601T/K COB0602T/K                                       *
    *                                                              *
    *  (PI96490 at 13.1)                                           *
    *                                                              *
    * -DTU option 2 Debug Tool Setup File                          *
    *  (and others that process JCL via the                        *
    *  JCL Analyzer, EQASUJCL):                                    *
    *                                                              *
    *   - When processing JCL which contains                       *
    *     a CONTROL-M statement, an error                          *
    *     message like                                             *
    *                                                              *
    *      CEE0454S The message number 1026                        *
    *      could not be found for facility                         *
    *      ID EQA.                                                 *
    *                                                              *
    *     could be issued, and the JCL is                          *
    *     not processed.                                           *
    *                                                              *
    *   - When processing JCL which contains                       *
    *     no JOB card, an error message like                       *
    *                                                              *
    *     CEE3204S The system detected a                           *
    *     protection exception (System                             *
    *     Completion Code=0C4).  From entry                        *
    *     point DMHGetMessage at compile                           *
    *     unit offset +0000011C at entry                           *
    *     offset +0000011C at address                              *
    *     2AD3F8DC                                                 *
    *                                                              *
    *     could be issued, and the JCL is                          *
    *     not processed.                                           *
    *                                                              *
    *  (PI96647 at 13.1)                                           *
    *                                                              *
    * -Under some conditions, IMS                                  *
    *  Transaction Isolation is unable to                          *
    *  find a region to clone if the                               *
    *  transaction has an ENQCT >= 10000.                          *
    *                                                              *
    * -In IBM Developer for z Systems (IDz)                        *
    *  and IBM z/OS Debugger v14.0, source                         *
    *  code is not displayed when debugging                        *
    *  a COBOL program using menu Debug As >                       *
    *  MVS Batch Application.                                      *
    *  (This is the host part of PI87786 at                        *
    *  14.0. PI87786 is against 5724T0700.                         *
    *  This fix requires the client IDz                            *
    *  14.0.0.7).                                                  *
    *  (PI87786 at 14.0)                                           *
    *                                                              *
    * -When using standard mode, when a                            *
    *  source file is moved after                                  *
    *  compilation, and the user indicates                         *
    *  the new source file location to the                         *
    *  debugger, the file name in the editor                       *
    *  view will now show the new source                           *
    *  location instead of the original                            *
    *  source location.  This is for C, C++,                       *
    *  Enterprise PL/I, and Enterprise COBOL                       *
    *  V6.2 when using "Show Source" instead                       *
    *  of the default "Show Expanded                               *
    *  Source".                                                    *
    *                                                              *
    *  FIXCAT KEYWORD:                                             *
    *  COB0602T/K                                                  *
    *                                                              *
    *  (PI94033 at 14.0)                                           *
    *                                                              *
    * -IBM z/OS Debugger v14 Code Coverage                         *
    *  for Debug Tool compatibility mode                           *
    *  does not depict the last COBOL                              *
    *  paragraph coverage correctly                                *
    *  The last COBOL paragraph is depicted                        *
    *  as 0 percent, but the lines depict it                       *
    *  as green, and the program is covered                        *
    *  at 100%.  It works for standard mode.                       *
    *  (PI91504 at 14.0)                                           *
    *                                                              *
    * -No Code Coverage report regenerated                         *
    *  in z/OS Debugger v14.0 running in                           *
    *  standard mode if job ABENDs.                                *
    *  (PI90554 at 14.0)                                           *
    *                                                              *
    * -ABENDS0C1 in EQA00OHV+'8B2'x with IBM                       *
    *  z/OS Debugger.                                              *
    *  IBM z/OS Debugger v14.0.0 while                             *
    *  debugging a CICS transaction in Debug                       *
    *  Tool compatibility mode, several                            *
    *  occurrences of the following error                          *
    *  messages are observed:                                      *
    *  EQA00OHV: LookupHook_Rc_NoHK.                               *
    *  EQA9999E:Unexpected hook-                                   *
    *  Cannot resume                                               *
    *  (PI90931 at 14.0)                                           *
    *                                                              *
    * -z/OS Debugger V14.1 hangs when you                          *
    *  disable LE condition breakpoints in                         *
    *  standard mode.                                              *
    *  (PI91901 at 14.1)                                           *
    *                                                              *
    * -Remote Debug: Can not set breakpoint                        *
    *  in composite assembler module for                           *
    *  inactive compile unit.                                      *
    *  (PI92358 at 14.1)                                           *
    *                                                              *
    * -At RD/z levels 9.5.1.6, when                                *
    *  debugging a COBOL V4 program some                           *
    *  variables don't change after a MOVE                         *
    *  statement.                                                  *
    *                                                              *
    *  Example:                                                    *
    *  In the Source program                                       *
    *                                                              *
    *  MOVE 'S' TO TEST                                            *
    *                                                              *
    *  When debugging the value of TEST is                         *
    *  '0' instead of 'S' after the MOVE                           *
    *  statement.                                                  *
    *                                                              *
    *  (PI93777 at RD/z 9.5.1)                                     *
    *                                                              *
    * -IMS ABEND after activating                                  *
    *  transaction isolation exits.  After                         *
    *  activated transaction isolation IMS                         *
    *  ABENDs with U4095, emergency restart                        *
    *  was not possible. Sysprogs removed                          *
    *  exits, then emergency restart was                           *
    *  possible.                                                   *
    *  (PI94265 at 14.1)                                           *
    *                                                              *
    * -In z/OS Debugger it is possible to                          *
    *  configure in EQASTART a different                           *
    *  dataset name for SEQATLIB. This                             *
    *  definition is not used in IMS                               *
    *  Transaction Isolation REXX EQAXTIMS.                        *
    *  (PI95089 at 14.1)                                           *
    *                                                              *
    * -Properly handle job card processing                         *
    *  for the ID/z "Remote IMS Application                        *
    *  with Isolation" debug launch.                               *
    *                                                              *
    * -IMS Transaction Isolation EQANICRT                          *
    *  does not handle creating lots of                            *
    *  resource definitions.  Job                                  *
    *  EQA.SEQASAMP(EQAWICRT) does not                             *
    *  create the correct output for IMS                           *
    *  TYPE2 commands or STAGE1 input.                             *
    *  For DD EQARESDS nothing is produced                         *
    *  or sometimes partial output is                              *
    *  produced.                                                   *
    *  For DD EQATY2DS partial output is                           *
    *  produced.                                                   *
    *  (PI97564 at 13.1)                                           *
    *                                                              *
    * -IMS Transaction Isolation private MPR                       *
    *  should use debug userid for                                 *
    *  substitution.                                               *
    *  The generic userid will not be                              *
    *  recognized and used as &&userid                             *
    *  pattern for substituting dataset                            *
    *  name.                                                       *
    *                                                              *
    *  (PI97562 at 14.1)                                           *
    *                                                              *
    * -ABENDS0C4 EQA0YCUS+x'16F8'- Remote                          *
    *  Debug Enterprise PLI side file reset                        *
    *  during termination.                                         *
    *  (PI97595 at 13.1)                                           *
    *                                                              *
    * -Message EQAZ182W not correct, because                       *
    *  region had abended in IMS Transaction                       *
    *  Isolation.                                                  *
    *  (PI98127 at 13.1)                                           *
    *                                                              *
    * -Debugger abends with ABENDS0C4 in                           *
    *  EQA30TK+x'3AA4'.                                            *
    *  (PI99179 at 14.1)                                           *
    *                                                              *
    * -Abend at CEEEV006.DFH3QSS+x'02AE'                           *
    *  when CICS starts up. Caused by bad                          *
    *  ALET in AR3 from DIAG TRAP                                  *
    *  IEAINITREGSTASK.                                            *
    *  (PI98733 at 13.1)                                           *
    *                                                              *
    * --- End Service ---                                          *
    ****************************************************************
    * RECOMMENDATION:                                              *
    * Installations that need these problem fixes should install   *
    * this service.                                                *
    ****************************************************************
    Miscellaneous service.
    

Problem conclusion

  • Service is available.
    

Temporary fix

Comments

APAR Information

  • APAR number

    PI92804

  • Reported component name

    ZOS DEBUGGER

  • Reported component ID

    5724T0713

  • Reported release

    E00

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    YesHIPER

  • Special Attention

    NoSpecatt / Xsystem

  • Submitted date

    2018-01-23

  • Closed date

    2018-07-23

  • Last modified date

    2018-08-02

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UI57394

Modules/Macros

  • EQA10SID EQA17CUR EQA0SNTC EQA00CEM EQA04PST EQA18QNS EQAS0GFU
    EQA10EMC EQA10PBK EQA00CEC EQA00CEE EQA00EHI EQAS0DBH EQAS0DBJ
    EQA08PFM EQAS0DBG EQA10HRS EQA00GLV EQARCCDA EQA00CCV EQASPDBI
    EQA00XML EQA00CCX EQA10RET EQA05CUS EQA10FND EQA0SMSU EQA00IPD
    EQA30SRT EQA00EHB EQA30KBM EQAS0HKS EQAS0HKN EQA12CES EQA30PT
    EQA0S9LB EQA10DMM EQA10QFY EQA12CEI EQA0CFUN EQA00REG EQA12LX1
    EQA12CED EQA00XPR EQA10PDM EQAS0INT EQA10AFS EQA18DSP EQAS0MVS
    EQA50PRE EQA13DCL EQAMVS31 EQA50PRO EQA50LIS EQA00CEX EQAAFSPS
    EQA08BLK EQA12SCN EQA0S0YE EQA0S0YC EQA00SET EQAS0GIV EQA00ABE
    EQAS0EH2 EQA00AEI EQACIC32 EQA17SYA EQA17SYC EQAS0FIN EQA07STT
    EQA17SYE EQA10TOG EQAS0DEH EQA10BKS EQA10BKT EQA14CAL EQAS0DEI
    EQA10BKP EQA10ER1 EQAS0SBM EQA10BKL EQA10ER0 EQA07EXP EQA0SINP
    EQA00PBK EQA10BKE EQAEV006 EQA0S4CN EQA00CIC EQA10BKC EQA10CMD
    EQA13SCN EQA10BKD EQA00EMG EQA00AEH EQACIC41 EQARCI3E EQA05PST
    EQAS7BLK EQAS0EHI EQAS0EHB EQA10GTO EQAZPCM  EQASUJCL EQA00GPA
    EQANMEST EQA10NAM EQA00RES EQA00QCS EQA00CHG EQA12CEX EQA12LXB
    EQA50LOG EQAS0CEM EQA00GSV EQA30STR EQAS0M99 EQA30STO EQAS0CEE
    EQA00TMM EQA50FC1 EQA0SDBI EQA50FC2 EQA00PDM EQA10AKA EQARCVND
    EQA00DMM EQA00QFY EQA13CEX EQA13LXB EQA18CUR EQA0SCBP EQA0SLSE
    EQANCFRM EQA00ENV EQANIPSB EQAS0SET EQAS0ABE EQA13LX1 EQA10BLK
    EQA0S4DS EQA14DCL EQA07CUS EQA00DLD EQADCREP EQA10CND EQA10DPA
    EQACSSIF EQA10DTC EQA14CEX EQA00BKP EQAXMSGT EQA00OEH EQA00OEI
    EQARCPDC EQARCOBD EQA08CUS EQA10DSE EQA0YCUS EQA08STT EQA50INT
    EQA50INP EQA10ALO EQA10TRA EQAS0QCS EQA08EXP EQA00FRE EQA00NAM
    EQA10BNK EQA50IMW EQA00TMX EQA10LAM EQA50WIN EQA00GTO EQAS0REG
    EQA0SXR1 EQA10EXE EQASVC99 EQA0SIPD EQA0XCUS EQA10MGF EQA14SCN
    EQAS7CUS EQA0CIC2 EQA10MGA EQAS0EMG EQADBGET EQASXPMT EQA10MG0
    EQA10QNS EQA10MG1 EQA18SYA EQA18SYE EQA18SYC EQAS7EXP EQA30PST
    EQA07PST EQA10LDD EQAW3Z3  EQA50LS1 EQA14LX1 EQA50LS2 EQA10BPR
    EQA50LS0 EQAW3Z6  EQANCREL EQA10BPP EQA10BPQ EQA00CND EQA00BLD
    EQA10ANL EQA10DTL EQA50XIO EQAS7STT EQA00BLK EQA10LCM EQA1S4LB
    EQA14LXB EQA10MEM EQA10RST EQA10CVC EQA0SDLD EQA08PST EQASXCUS
    EQA0SRGU EQA00DTA EQA0S4LB EQA00DTC EQA00TSR EQAS0DMM EQA00LBL
    EQA30NTC EQA00DSF EQA10CUS EQA17DCL EQA00OHT EQA00OHV EQA0SXU1
    EQA10STU EQA00OHB EQANCABE EQA00OHC EQA10STM EQA00OHE EQARCTRC
    EQA00OHH EQA00OHI EQA0SQFY EQAS0GTO EQA00OHL EQA10EXX EQA30DU
    EQA00BND EQA00LAM EQAS0NAM EQA0SCHG EQACSCOM EQA10EXM EQA10EXN
    EQA50WN1 EQA50WN2 EQA00TRA EQA0SXUT EQA00ALO EQA50WN0 EQA10LIN
    EQA10HAD EQA00EXE EQA30LNK EQA0SCL2 EQA0SCL1 EQAXPL31 EQA00SRT
    EQA00KBM EQA00QNS EQA02PFM EQA12DSP EQA10ASN EQANICRT EQA0SXRI
    EQAS7PST EQA10QRY EQA10QRZ EQAYSMMN EQALDR64 EQA0SEMC EQADBFIL
    EQAD3UT1 EQA00LDD EQA00TTL EQANCTER EQARCL4  EQA00MEM EQA00ANC
    EQA00LCM EQAS0BLK EQA00EVH EQA10SVC EQA00DTL EQA0STKH EQAS0CND
    EQA00ANL EQA50VIO EQA00BPP EQA00RPB EQALDR31 EQA17CED EQA30INT
    EQA00CVC EQA17LX1 EQA00POP EQA17CEI EQA03PFM EQA0SBKP EQA50OBJ
    EQA10SYE EQACSTCP EQA10SYC EQA17CEX EQA17LXB EQA00CUS EQA12QNS
    EQAS0OHH EQARCEXP EQACSINT EQA00CTX EQAS0DU  EQAS0OHC EQASYCUS
    EQA00STO EQAEVDBG EQA00STR EQA00TVT EQA00STT EQA00STU EQA10PRD
    EQA0S9YE EQA10PRC EQA0S9YC EQA0S9YA EQA30SBM EQA0SUT1 EQA02BLK
    EQAS0BND EQA0SUT2 EQA10LIT EQA50END EQA13QNS EQA0SNAM EQA10LN2
    EQA10LN3 EQA10LN0 EQA10LN1 EQA00RUN EQA10MON EQA00NML EQA10OSM
    EQA00QSS EQA00QRY EQAS0OHT EQA0SCLU EQA12CUR EQAS0OHV EQAS0DSF
    EQA03BLK EQA50PC1 EQA50PC2 EQA50PC0 EQA0AIPD EQA0SCMD EQA17SCN
    EQA10PTP EQA0AIP4 EQA00RSV EQA18DCL EQA0AIP3 EQA14CMS EQA0AIP2
    EQA0AIP1 EQA13DSP EQAS0DTL EQA13MDV EQAS0EVH EQA50REQ EQAS0ANC
    EQA00SVC EQA00CVT EQA0SBLD EQA0AIP6 EQA0AIP5 EQA04CMS EQA14EVL
    EQA0SDTL EQA10OUT EQA10FCI EQA50COL EQAS0MGA EQA00PST EQA10VC3
    EQA0SRPC EQA10LOG EQA10VC1 EQA10VC2 EQANMDBG EQA10VC0 EQA0SLDD
    EQACTL   EQA10CV  EQAS0KBM EQAS0QNS EQA0SRQ1 EQA00RWD EQA0SRQ2
    EQA0SRQ3 EQA0SRQ4 EQAS0SRT EQA10FBP EQA14QNS EQA50CO2 EQAS0STO
    EQA00FA  EQAS0STR EQA50CO0 EQA50CO1 EQA01SV2 EQA10LNK EQA10NRM
    EQA10VAT EQA04PFM EQA10VAR EQADBLNX EQA00LIS EQA00NMU EQA0SEXA
    EQA0SEXE EQA50MAP EQA18SCN EQASAIP1 EQAS0POP EQA00GCC EQASAIP6
    EQASAIP3 EQASAIP2 EQA00LMS EQASAIP5 EQASAIP4 EQA0STRE EQA00OSX
    EQA05PFM EQA0SCPU EQA50FSC EQAS0CUS EQA0SUTI EQA12SYE EQA00DU
    EQA12SYC EQA12SYA EQA02CUS EQAS0STT EQASAIPD EQA0CINF EQA00LLF
    EQA00LLH EQA14MDV EQA18CED EQA18LX1 EQA14DSP EQA18CEI EQA02STT
    EQA00LLT EQA50TMN EQA0SBPP EQA13CUR EQA02EXP EQA00CV  EQA04BLK
    EQA00A64 EQADCCXR EQA0SDTC EQA0SRP1 EQA18CEX EQA18LXB EQA0SRP2
    EQA0SRP3 EQA0SLCM EQA0SRP4 EQA00LLC EQADCCN1 EQADCCN2 EQADCVSD
    EQANCZFS EQADCCN0 EQAS0RUN EQADCCN3 EQADCCN4 EQA10LST EQA03STT
    EQA50SRV EQA50PM1 EQA50PM2 EQA00GDV EQA03EXP EQA10LSE EQA05BLK
    EQA50PM0 EQA30TKI EQA00LNG EQA00GDD EQA00VAR EQARCHEX EQANCZGS
    EQAS3UT1 EQA00GDF EQA00LNK EQA00GDG EQA30DMM EQA00GDP EQASSUT1
    EQA50MEM EQA13SWC EQAS0NMU EQADCCNH EQA10DAT EQA10XIF EQANCHAB
    EQA10DES EQATIEXT EQAS0PST EQA0SEXN EQACIC51 EQA0OIP5 EQA10GL3
    EQA0OIP6 EQA0SEXP EQA0OIP3 EQA10GL1 EQA0OIP4 EQA10GL2 EQA50DSP
    EQA0OIP1 EQA0PDBI EQA0OIP2 EQA10FIN EQA10GL0 EQAXTIMS EQASG006
    EQA0SEXU EQA02PST EQA0SEXX EQAS0RWD EQA00GFU EQA00GFV EQA00MSG
    EQA10DDT EQA10HLS EQA10INT EQAL6Z3  EQAL6Z6  EQA10MVS EQA14CUR
    EQA10INP EQA50UTL EQA10MVO EQAS0A64 EQA30HSH EQA0SRSM EQA0S4YE
    EQA13SYE EQA0SDU  EQA00NTC EQA03CUS EQA10LTB EQA0S4YC EQA13SYC
    EQA0S4YA EQA13SYA EQA10TGA EQA00HKN EQA10M99 EQA17DSP EQA00DCL
    EQA00LST EQAS0OSM EQA00HKS EQA10LX0 EQA00GIV EQA10LX1 EQAPMPSL
    EQANBSWT EQA00LSE EQA04CUS EQASUER0 EQANPCNH EQASUER1 EQA00DBG
    EQALMBND EQA00DBH EQA00DBI EQA00DBJ EQA04STT EQAS0LNK EQAS0LNG
    EQA04API EQADXPMT EQA03ASN EQA04EXP EQA1S9LB EQA50MIO EQA0OIPD
    EQA10IPD EQA00LRC EQA17QNS EQA10CCV EQAS0LMS EQA10XML EQA00DEH
    EQA50SUF EQA00DEI EQA00FIN EQA12DCL EQAMVS64 EQANPCN1 EQA0SPRD
    EQA00EH2 EQANPCN0 EQA05STT EQAIIRMG EQA14PRF EQA05EXP EQARCDBG
    EQANPCN2 EQA07BLK EQA50STR EQA02LOC EQA00SBM EQAS0GDV EQA30TK
    EQANCLDE EQAS0GDP EQA14SYA EQAXFOR  EQA14SYC EQA14SYE EQA03PST
    EQA50PNL EQA00INT EQA10FLO EQA10SEV EQADBSRT EQA10SET EQAXSIO
    EQA50PMN EQALMA   EQA50CTL
    

Fix information

  • Fixed component name

    ZOS DEBUGGER

  • Fixed component ID

    5724T0713

Applicable component levels

  • RE00 PSY UI57394

       UP18/07/27 P F807 ¢

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.



Document information

More support for: z/OS family

Software version: E00

Reference #: PI92804

Modified date: 02 August 2018