IBM Support

PI90844: ABEND IN CEEBINIT DURING JCL PARSING CONTAINING //SYSIN DD *,SYMBOLS=JCLONLY IN DTU 18/02/05 PTF PECHANGE

A fix is available

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as program error.

Error description

  • After installation of UI48653, JCL parsing under Debug Tool
    Utilities (DTU) may get an ABEND in CEEBINIT when processing DD
    cards with SYMBOLS, VOL, VOLUME, AMP or other parameters.
    
    CEE3204S The system detected a protection exception (System
    Completion Code=0C4)
    From entry point ProcessParms at compile unit offset +000001BE
    at entry offset +000001BE at address 26F75496.
     IEA995I SYMPTOM DUMP OUTPUT
     SYSTEM COMPLETION CODE=0C4  REASON CODE=00000004
      TIME=11.22.40  SEQ=20278  CPU=0000  ASID=00F3
      PSW AT TIME OF ERROR  078D1000   800EB3E4  ILC 2  INTC 0D
        ACTIVE MODULE           ADDRESS=00000000_000E7C88
        OFFSET=0000375C
        NAME=CEEBINIT
    
    This APAR corrects this problem and SUPs these two PTFs:
      UI48653 PI84094
      UI51496 PI78472, PI78480, PI81873, PI82334 marked as PI81873
    
    The JCL parser runs in these Debug Tool Utilities (DTU)
    options:
    
    2  Debug Tool Setup File
       Manage setup files and start debug session in TSO foreground
       or batch.
       and use COPY to copy in JCL.
    
    8  JCL for Batch Debugging
       Modify JCL to start a debugging session for batch programs.
      2  Prepare and Start Debug Session
         Modify the JCL that starts a debugging session for batch
         programs
    
    A  JCL to Setup File Conversion
       Convert JCL to Debug Tool setup file.
    

Local fix

Problem summary

  • ****************************************************************
    * USERS AFFECTED: Debug Tool V13.1 users who use Debug Tool    *
    *                 Utility (DTU) options that process JCL and   *
    *                 the site has UI48653 installed.              *
    ****************************************************************
    * PROBLEM DESCRIPTION: After installation of UI48653, JCL      *
    *                      parsing under Debug Tool Utilities      *
    *                      (DTU) may get an ABEND in CEEBINIT      *
    *                      when processing DD cards with SYMBOLS,  *
    *                      VOL, VOLUME, AMP or other parameters.   *
    *                                                              *
    *                      CEE3204S The system detected a          *
    *                      protection exception (System            *
    *                      Completion Code=0C4) From entry point   *
    *                      ProcessParms at compile unit offset     *
    *                      +000001BE at entry offset +000001BE at  *
    *                      address 26F75496.                       *
    *                       IEA995I SYMPTOM DUMP OUTPUT            *
    *                       SYSTEM COMPLETION CODE=0C4             *
    *                       REASON CODE=00000004                   *
    *                        TIME=11.22.40  SEQ=20278              *
    *                        CPU=0000  ASID=00F3                   *
    *                        PSW AT TIME OF ERROR  078D1000        *
    *                        800EB3E4  ILC 2  INTC 0D              *
    *                          ACTIVE MODULE                       *
    *                          ADDRESS=00000000_000E7C88           *
    *                          OFFSET=0000375C                     *
    *                          NAME=CEEBINIT                       *
    *                                                              *
    *                      This APAR corrects this problem and     *
    *                      SUPs these two PTFs:                    *
    *                                                              *
    *                        UI48653 PI84094                       *
    *                        UI51496 PI78472, PI78480, PI81873,    *
    *                                PI82334 marked as PI81873     *
    *                                                              *
    *                      The JCL parser runs in these Debug      *
    *                      Tool Utilities (DTU) options:           *
    *                                                              *
    *                      2  Debug Tool Setup File                *
    *                         Manage setup files and start debug   *
    *                         session in TSO foreground or batch.  *
    *                         and use COPY to copy in JCL.         *
    *                                                              *
    *                      8  JCL for Batch Debugging              *
    *                         Modify JCL to start a debugging      *
    *                         session for batch programs.          *
    *                        2  Prepare and Start Debug Session    *
    *                           Modify the JCL that starts a       *
    *                           debugging session for batch        *
    *                           programs                           *
    *                                                              *
    *                      A  JCL to Setup File Conversion         *
    *                         Convert JCL to Debug Tool setup      *
    *                         file.                                *
    ****************************************************************
    * RECOMMENDATION: Install this service if you have UI48653     *
    *                 installed.                                   *
    ****************************************************************
    Abend in the JCL parser in Debug Tool Utilities (DTU) after
    UI48653.
    

Problem conclusion

  • Abend resolved.
    

Temporary fix

Comments

APAR Information

  • APAR number

    PI90844

  • Reported component name

    DEBUG TOOL Z/OS

  • Reported component ID

    5655Q1000

  • Reported release

    D10

  • Status

    CLOSED PER

  • PE

    YesPE

  • HIPER

    YesHIPER

  • Special Attention

    NoSpecatt / Xsystem

  • Submitted date

    2017-11-29

  • Closed date

    2018-02-06

  • Last modified date

    2018-03-01

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UI53688

Modules/Macros

  • DMH000D  DMH4001D DMH4001I DMH4002I DMH4003I DMH4005I DMH4006I
    DMH4007D DMH4007I DMH4008I DMH4009I DMH4010I DMH4011I DMH4012I
    DMH4013I DMH4014I DMH4015I DMH4016I DMH4017I DMH4018I DMH4019I
    DMH4020I DMH4021I DMH4022I DMH4023I DMH4024I DMH4025I DMH4026I
    DMH4027I DMH4028I DMH4030I DMH4032I DMH4035D DMH4035I DMH4036I
    DMH4037I DMH4038I DMH4044I DMH4045I DMH4046I DMH4047I DMH4048I
    DMH4049I DMH4050D DMH4050I DMHCONST DMHDBCS  DMHIO    DMHIOAPI
    DMHLCL   DMHU001I DMHU005I DMHU900I DMHU920I DMHU921I DMHU930D
    DMHU930I DMHU940D DMHU940I DMHU941I DMHU950D DMHU950I DMHU988I
    DMHU989I DMHU990I DMHU993I DMHU994I DMHU995I DMHU996I DMHU997I
    DMHUTMSG EQA00ABE EQA00CIC EQA00CND EQA0CINF EQA0SCL1 EQA0SCL2
    EQA0SRP1 EQA0SRP2 EQA10PRC EQA80VER EQAAFSPS EQADCCN0 EQAEV006
    EQALMA   EQASUJCL EQAXBTS  EQAXCJ   EQAXCJ2  EQAXCJ3  EQAYSMMN
    

Fix information

  • Fixed component name

    DEBUG TOOL Z/OS

  • Fixed component ID

    5655Q1000

Applicable component levels

  • RD10 PSY UI53688

       UP18/02/09 P F802 ­

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSTQWA","label":"IBM Debug for z\/OS"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"D10","Edition":"","Line of Business":{"code":"LOB35","label":"Mainframe SW"}}]

Document Information

Modified date:
01 March 2018