APAR status
Closed as program error.
Error description
Correct SCRT reporting for MQ Managed File Transfer (MFT) Advanced and Advanced VUE Additional keywords: 5655AV900 5655AV100 5655AM900
Local fix
N/A
Problem summary
**************************************************************** USERS AFFECTED: This issue affects all users of IBM MQ Managed File Transfer for z/OS Version 9 Release 0 Modification 0. Platforms affected: z/OS **************************************************************** PROBLEM DESCRIPTION: When MQ Managed File Transfer generated SMF89 records for SCRT reporting, the records always contained the base product identifier (PID), 5655-MF9. When running under the MQ Advanced or MQ Advanced VUE software bundles the SMF89 records should have contained the MQ Advanced or MQ Advanced VUE PID instead: MQ Advanced - 5655-AV9 MQ Advanced VUE - 5655-AV1
Problem conclusion
This APAR removes the need to manually annotate SCRT reports for MQ Managed File Transfer to indicate use of an MQ software bundle. A new configuration property "productId" has been added to allow the PID recorded to be overridden. This property specifies the type of PID against which MQ Managed File Transfer usage is to be recorded. The value for productId can be set by running the new fteSetProductId command (which has been introduced as part of this APAR) specifying one of the values described below: ************************************************************ Value: MFT Description: Managed File Transfer is a standalone MQ for z/OS product, with product ID 5655-MF9. This is the default value. Value: Advanced Description: Managed File Transfer is part of an IBM MQ Advanced for z/OS product, with product ID 5655-AV9. Value: AdvancedVue Description: Managed File Transfer is part of an IBM MQ Advanced for z/OS, Value Unit Edition product, with product ID 5655-AV1. ************************************************************ The value specified is stored in the MQ Managed File Transfer configuration file installation.properties Unless running MQ Advanced or MQ Advanced VUE the default value can be used. Note that fteSetProductId should only be run after at least one coordination queue manager has been defined. fteDisplayVersion -v has been updated to display the product id, if run on z/OS and the product id has been specified. For information on the new productId property and the fteSetProductId command, refer to the following topics in the MQ V9 section of IBM MQ Knowledge Center: Topic: Product usage recording with IBM MQ for z/OS products URI: https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_9.0.0/com. ibm.mq.ins.doc/q009700_.htm fteSetProductId (set z/OS SCRT recording product id) https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_9.0.0/com. ibm.wmqfte.doc/set_productid_cmd.htm New message have been added to MQ Managed File Transfer by this APAR, and some existing messages have been updated. Information about these messages can be found below: Managed File Transfer diagnostic messages BFGPR0001 - BFGPR9999 https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_9.0.0/com. ibm.wmqfte.messages.doc/fte_bfgpr.htm BFGPR0137I Product usage data recording started for product ''<insert_0>'', product id ''<insert_1>''. Severity 0 : Information Explanation IBM MQ usage recording will be for product ''{0}''. Response No user action required. BFGPR0140I Product usage data is not being recording for product ''<insert_0>'', product id ''<insert_1>''. Severity 0 : Information Explanation IBM MQ usage recording will not be collected for product ''{0}''. Thismay be because usage recording is not active on the system. Response No user action required. BFGPR0136E Internal error: ''<insert_0>'' is not valid for productId. Severity 20 : Error Explanation An internal error has occurred attempting while attempting to register for SCRT usage recording. Response If the problem persists, see problem determination information in the product documentation. BFGPR0138W Product usage data already being recorded for product ''<insert_0>'', product id ''<insert_1>''. Severity 10 : Warning Explanation The product attempted to start product usage data recording for product ''{0}'', but it was already started. This may not be a problem. Response No user action required if there are no other issues with usage data recording. BFGPR0139E Internal error: Product usage data cannot be recorded because the limit on product registrations has been reached for the address space. Severity 20 : Error Explanation The product attempted to start product usage data recording for product ''{0}'', product id ''{1}'', which failed. Response CMSG002 <a href="https://www.ibm.com/support/knowledgecenter/SSFKSJ_9.0.0/c om.ibm.wmqfte.messages.doc/messages_main.htm">Managed File Transfer diagnostic messages</a> :BFGCL0001 - BFGCL9999 https://www.ibm.com/support/knowledgecenter/SSFKSJ_9.0.0/com.ibm .wmqfte.messages.doc/fte_bfgcl.htm BFGCL0757E Invalid command options. Specify either logAgent or logMonitor option but not both. Severity 20 : Error Explanation The specified option is not valid for the command. Specify either logAgent or logMonitor option but not both. Response Specify valid command option. BFGCL0753E A productId must be specified when setting the productId. Severity 20 : Error Explanation You cannot set the productId without specifying the value to which you want to set it. Response Specify the '-h' parameter to display usage information about the command. BFGCL0754I The specified productId ''<insert_0>'' is already being used. No changes have been made. Severity 0 : Information Explanation The specified productId is already being used. No changes have been made. Response No action required. BFGCL0755I The specified productId ''<insert_0>'' has been set. Severity 0 : Information Explanation The specified productId has been set. Response No action required. <a href="https://www.ibm.com/support/knowledgecenter/SSFKSJ_9.0.0/c om.ibm.wmqfte.messages.doc/messages_main.htm">Managed File Transfer diagnostic messages</a> : BFGUB0001 - BFGUB9999 https://www.ibm.com/support/knowledgecenter/SSFKSJ_9.0.0/com.ibm .wmqfte.messages.doc/fte_bfgub.htm BFGUB0065E The property name "<insert_0>" has an invalid value of "<insert_1>". The valid values are "<insert_2>". Severity 20 : Error Explanation The named property must be a valid value for the command to successfully complete. Response Review the associated property file and change the property so that is has a valid value. --------------------------------------------------------------- The fix is targeted for delivery in the following PTFs: Version Maintenance Level v9.0 CD 9.0.3 v9.0 LTS 9.0.0.2 The latest available MQ maintenance can be obtained from 'WebSphere MQ Recommended Fixes' http://www-1.ibm.com/support/docview.wss?rs=171&uid=swg27006037 If the maintenance level is not yet available information on its planned availability can be found in 'WebSphere MQ Planned Maintenance Release Dates' http://www-1.ibm.com/support/docview.wss?rs=171&uid=swg27006309 ---------------------------------------------------------------
Temporary fix
Comments
APAR Information
APAR number
PI79279
Reported component name
MQ MFT Z/OS V9
Reported component ID
5655MF900
Reported release
900
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2017-04-04
Closed date
2017-08-24
Last modified date
2017-08-24
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Fix information
Fixed component name
MQ MFT Z/OS V9
Fixed component ID
5655MF900
Applicable component levels
R900 PSY
UP
[{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSYHRD","label":"IBM MQ"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"9.0","Edition":"","Line of Business":{"code":"LOB45","label":"Automation"}}]
Document Information
Modified date:
24 August 2017