PI69479: MQ Z/OS: ABEND5C6-00C91500 IN CSQIERS3

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• At queue manager restart, a dump with the following symptom is
  created:
  
  TITLE: ssid,ABN=5C6-00C91500,U=SYSOPR  ,C=W9700.800.DMC
  -CSQIERS3,M=CSQGFRCV,LOC=CSQILPLM.CSQIERS3+00001EBE
  
  or, if the dump was suppressed by DAE:
  CSQY291E CSQWDSDM SDUMPX FAILED, RC=00000B08,ssid,
  ABN=5C6-00C91500,LOC=CSQILPLM.CSQIERS3+00001EBE
  
  followed by:
  *CSQV086E QUEUE MANAGER ABNORMAL TERMINATION REASON=00D96001
  
  The problem goes back to the prior start of the queue manager
  where the it was started with an inconsistent set of logs and
  pagesets.  The BSDS and logs were recreated, but the page sets
  did not have CSQUTIL RESETPAGE run to have RBA values reset as
  instructed at https://ibm.biz/BdrTh8.
  
  That prior start should have received an abend to let the
  administrator know that the RESETPAGE was missed so that the
  problem could be corrected then.  That would prevent the need
  for a cold start to resolve the abends encountered during the
  next start-up.
  
  Additional Symptom(s) Search Keyword(s):
  ABEND5C6 ABENDS5C6 5C6 S5C6 S005C6
  

Local fix

• By the time the 00C91500 error occurs, a cold start will be
  needed to resolve the problem:
  - Redefine the BSDS and logs. Reference sample CSQ4BSDS in
  SCSQPROC--you should have a customized copy of it from when the
  queue manager was created.
  - Reformat all the page sets using CSQUTIL with FORMAT
  TYPE(RECOVER).
  

Problem summary

• ****************************************************************
  * USERS AFFECTED: All users of WebSphere MQ for z/OS Version 8 *
  *                 Release 0 Modification 0.                    *
  ****************************************************************
  * PROBLEM DESCRIPTION: Various errors occur after the logs are *
  *                      reset if RESETPAGE was not run against  *
  *                      the page sets. These can                *
  *                      include:5C6-00C90900                    *
  *                             :5C6-00C91500                    *
  *                             :5C6-00C90600                    *
  *                             :5C6-00D10231                    *
  *                             :Loss of message data integrity  *
  ****************************************************************
  * RECOMMENDATION:                                              *
  ****************************************************************
  When the log RBA approaches the end of the RBA range the logs
  need to be reset.
  After redefining the logs CSQUTIL should be run with the
  RESETPAGE option to reset the log RBA values in all of the page
  sets.
  If the RESETPAGE step is omitted, or done incorrectly, and the
  queue manager is started the incorrect RBA values in the page
  sets can lead to data integrity errors, and require the queue
  manager to be cold started to recover.
  

Problem conclusion

• Additional validation is added to detect page sets that have not
  had RESETPAGE run against them following a log reset.
  When a page set that requires RESETPAGE to be run is detected
  message CSQI050E is issued to report this.
  When this occurs during queue manager restart, queue manager
  startup is terminated abnormally with abend 5C6-00C94525.
  When this occurs during DEFINE PSID processing (i.e. readding a
  page set that had been added dynamically), the DEFINE PSID
  command fails.
  
  The WebSphere MQ for Version 8 Knowledge center is updated as
  follows:
  IBM MQ
   IBM MQ 8.0.0
     IBM MQ
       Reference
         Diagnostic Messages
           Messages and reason code for z/OS
             Messages
              Data manager messages (CSQI...)
  (csq_i)
  https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_8.0.0/
                                      com.ibm.mq.ref.doc/csq_i.htm
  
  A new message description is added:
  "
  CSQI050E
  
  csect-name Page set psid value RESETPAGE needed
   Severity
    8
   Explanation
  
  The queue manager has detected that a page set contains RBA
  values higher than the maximum logged.
  
   System action
   During queue manager startup, restart is terminated abnormally
    with completion code X'5C6' and reason code X'00C94525'.
   During DEFINE PSID command processing, the command fails.
  
  System programmer response
  
  Run CSQUTIL with the RESETPAGE utility against the page set(s)
  indicated in the messages and retry the failed operation.
  "
  
  IBM MQ
   IBM MQ 8.0.0
     IBM MQ
       Reference
         Diagnostic Messages
           Messages and reason code for z/OS
             Codes
              Data manager codes (X'C9')
  (codes_c9)
  https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_8.0.0/
                                   com.ibm.mq.ref.doc/codes_c9.htm
  
  A new code is added:
  "
  00C94525
   An internal error has occurred.
  
      An attempt to restart with a page set that has not had
      RESETPAGE run was detected.
  
      Message CSQI050E is issued before this error occurs.
  
  System action
  
  Restart is terminated abnormally with completion code X'5C6'
  and a dump is produced.
  
   System programmer response
  
  Restart the queue manager after running CSQUTIL with the
  RESETPAGE option for the page set(s) indicated in the CSQI050E
  messages
  
  "
  000Y
  001Y
  002Y
  003Y
  004Y
  005Y
  CSQFIDIC
  CSQFIDIE
  CSQFIDIF
  CSQFIDIK
  CSQFIDIU
  CSQFMTXC
  CSQFMTXE
  CSQFMTXF
  CSQFMTXK
  CSQFMTXU
  CSQIECUR
  CSQPDEFP
  

Temporary fix

• *********
  * HIPER *
  *********
  

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  PI79760 UI46832 UI46833 UI46834 UI46835 UI46836 UI46837

Modules/Macros

• CSQFIDIC CSQFIDIE CSQFIDIF CSQFIDIK CSQFIDIU CSQFMTXC CSQFMTXE
  CSQFMTXF CSQFMTXK CSQFMTXU CSQIECUR CSQPDEFP
  

Fix information

• Fixed component name

  WMQ Z/OS 8

• Fixed component ID

  5655W9700

Applicable component levels

• R000 PSY UI46832

     UP17/06/06 P F706 ¢

• R001 PSY UI46833

     UP17/06/06 P F706 ¢

• R002 PSY UI46834

     UP17/06/06 P F706 ¢

• R003 PSY UI46835

     UP17/06/06 P F706 ¢

• R004 PSY UI46836

     UP17/06/06 P F706 ¢

• R005 PSY UI46837

     UP17/06/06 P F706 ¢

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.