A fix is available
APAR status
Closed as program error.
Error description
Miscellaneous bug fixes
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: All Fault Analyzer Version 12 users. * **************************************************************** * PROBLEM DESCRIPTION: 01. When processing CICS Trace entries * * to determine source line #, the * * mismatch pop-up is presented, even * * though the COBOL SYSDEBUG file * * matches. * * APAR PI08017 * * 02. Cursor scrolling not working * * correctly on the CICS Internal * * Trace display, Saved Report display * * and Compiler Listing display. * * APAR PI08081 * * 03. Error message "Not a history file" * * when specifying a migrated data set * * name on the Fault Entry List * * display. * * APAR PI10568 * * 04. IMS region shutdown held up by * * Fault Analyzer abend processing * * when initial abend TCB is holding * * LE MSGFILE ENQ. * * APAR PI10572 * * 05. Fault Analyzer IDIS subsystem might * * get recursive IDI0144E and IDI0124E * * messages. * * APAR PI10569 * * 06. Blank saved report displayed with * * 'V' or 'S' line command if history * * file specified using single quotes * * in a View member. * * APAR PI09075 * * 07. Plugin history file MODULE column * * shows information that differs from * * the equivalent column displayed * * with the Fault Analyzer ISPF * * interface. * * APAR PI09306 * * 08. Fault Analyzer report for IMS Java * * might show an additional incorrect * * LE U4038 abend in the event * * summary. * * APAR PI10570 * * 09. Fault Analyzer might produce more * * than one RFR dump for one abend * * when short on storage. * * APAR PI10573 * * 10. More than one fault entry might be * * created if the IDIS subsystem is * * experiencing Cross-System Coupling * * Facility (XCF) message delays. * * APAR PI10574 * * 11. Message IDI0095 IDICABND:1415 * * CSVQUERY error. * * APAR PI10575 * * 12. Message IDI0092S Time 32 minutes * * for analysis exceeded. * * APAR PI10698 * * 13. Fast Exclude might not work for * * abends in tasks which prohibit * * queueing of asynchronous exits. * **************************************************************** * RECOMMENDATION: Apply the provided PTF. * **************************************************************** 01. DEBUGINF is not in the minidump. 02. The saved cursor position was being retrieved from an incorrect variable. 03. The check for expected history file attributes failed when the data set was migrated. 04. The IMS region would not shut down or cancel because the Fault Analyzer IDIDA analysis task was in an ENQ deadlock with the abending TCB, which had abended in LE code while holding the LE MSGFILE ENQ. 05. If the XCF message chain pointer is overlayed, the IDIS subsystem might get recursive abends with messages IDI0144E and IDI0124E. 06. The single quotes were not expected and caused fopen of the fault entry member to fail without an error message being issued. 07. The plugin history file MODULE column value is showing the module name associated with the initial abend as opposed to the point of failure. 08. IMS with Java and CEEPIPI might cause Fault Analyzer to add a historical CIB event incorrectly in the report. 09. Recursion of S878 conditions during Recovery Fault Recording (RFR) processing can cause more than one SDUMP to be taken for the one initial abend. 10. With XCF message delays in the IDIS subsystem, the recovery process might cause more than one fault entry to be created for the same abend job and timestamp. 11. Some Fault Analyzer analysis jobs might get IDI0095W unexpected condition, CSVQUERY error. 12. Loop in code at entry point cDDfCloseP. 13. This is the existing design.
Problem conclusion
01. DEBUGINF added to minidump during COBOL CLLE discovery. 02. The saved cursor position is now retrieved from the correct variable. 03. An additional check for a migrated data set has been added, prior to the attribute check. 04. Code has been added to break the deadlock. 05. The logic has been updated to resolve the chaining error. 06. An error message will be issued if failing to open the fault entry member and specification of single quotes around View member history file names has been supported. 07. The plugin history file MODULE column is now showing the point-of-failure module name. 08. The condition has been catered for in the code. 09. Code has been added to stop additional SDUMPs against one fault entry. 10. Code added to stop assignment of a new fault ID if one already exists for the same job and timestamp. 11. Code added to accommodate provider field request getting rc=4. 12. The code has been fixed to prevent the loop from occurring. 13. The design has been changed to allow Fast Exclude for abends in task which prohibit queueing of asynchronous exits.
Temporary fix
Comments
APAR Information
APAR number
PI08457
Reported component name
FAULT ANALYZER
Reported component ID
5655W6900
Reported release
C10
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2013-12-18
Closed date
2014-02-03
Last modified date
2014-10-08
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UI14758
Modules/Macros
HADQC10J IDICAASM IDICABND IDICADYN IDICALE IDICALOC IDICASUB IDICBDB2 IDICCFND IDICISA IDICISA2 IDICNF00 IDICNOTR IDICOPYR IDICRXDX IDICRXEI IDICRXET IDICRXHC IDICSMF IDICSPC IDICSVCR IDICSV14 IDICUXCS IDICUXWR IDIDA IDIDATSA IDIDATST IDIEDPIE IDIEEDE IDIGMAIN IDIGNTCE IDIGSVRJ IDIGUIP IDIGWEB IDIGWEBB IDIHE003 IDIHIBMM IDIHPMSG IDIHUSRM IDIMCICS IDIM03 IDIM04 IDIM06 IDIM07 IDINDEX IDIPASUB IDIPBRWS IDIPCTRF IDIPDDIR IDIPDSCU IDIPHC00 IDIPHC01 IDIPHC02 IDIPHC07 IDIPHI04 IDIPHI06 IDIPHI07 IDIPHI09 IDIPHL01 IDIPHO02 IDIPHS00 IDIPH000 IDIPH001 IDIPH002 IDIPH003 IDIPH004 IDIPH005 IDIPH006 IDIPH007 IDIPH111 IDIPH112 IDIPH113 IDIPH114 IDIPH115 IDIPH116 IDIPH117 IDIPH118 IDIPH119 IDIPH120 IDIPH121 IDIPH122 IDIPH123 IDIPH124 IDIPH125 IDIPH126 IDIPH127 IDIPH128 IDIPH129 IDIPH130 IDIPH131 IDIPH132 IDIPH133 IDIPH134 IDIPH137 IDIPH138 IDIPH139 IDIPH140 IDIPH141 IDIPH143 IDIPH148 IDIPH154 IDIPH158 IDIPH210 IDIPH211 IDIPH215 IDIPH216 IDIPH218 IDIPH236 IDIPH237 IDIPH238 IDIPIDAD IDIPILPT IDIPLDSN IDIPLT IDIS$NDX IDISAMAN IDISAQUE IDISAREQ IDISASUB IDISBRW2 IDISCICS IDISCJST IDISDB2P IDISDB2S IDISFESK IDISFPEX IDISIFND IDISJAX IDISJL IDISJLD IDISJLOG IDISLKUP IDISLOG IDISMAIN IDISREG IDISRFRA IDISRFRD IDISRP02 IDISSREQ IDISS254 IDISTIME IDISUPDI IDISVIEW IDISWRAP IDISXCFA IDISXPLA IDISXPLB IDISXPLC IDISXPLP IDITABD IDIUGPDF IDIUTIL IDIVPCOB IDIVPPLE IDIVPPLI IDIWH001 IDIWP002 IDIXALGL IDIXALOG IDIXAPI IDIXASUB IDIXATT IDIXCCEE IDIXCC52 IDIXCEE IDIXCE53 IDIXCE67 IDIXCE68 IDIXCE69 IDIXCM53 IDIXCM67 IDIXCM68 IDIXCM69 IDIXCXUM IDIXCX52 IDIXCX53 IDIXDCAP IDIXDSAC IDIXDUMP IDIXFA IDIXGSPC IDIXGSPS IDIXJAVA IDIXMAP IDIXOPT IDIXSNAP IDIXTSEL
Fix information
Fixed component name
FAULT ANALYZER
Fixed component ID
5655W6900
Applicable component levels
RC10 PSY UI14758
UP14/02/07 P F402
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"C10","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSXJAJ","label":"Fault Analyzer for z\/OS"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"C10","Edition":"","Line of Business":{"code":"LOB35","label":"Mainframe SW"}}]
Document Information
Modified date:
08 October 2014