A fix is available
APAR status
Closed as program error.
Error description
The ABEND0C4 in module ISTRACSW occurred while taking a CSDUMP. ABEND0C4 occurred due to invalid SRNCB pointer in reg6. This was loaded from the overlaid work area. Here is the overlaid work area pointed by ATCMSGFP - ATCVT + X'220 and it is as follows: E2E2C3F0 F1000000 00000000 003C8000 | SSC01...........| 00000000 00000000 00000000 00000000 | ................| E2E3E2E2 00000001 00000000 D4D7E3C5 | STSS........MPTE| C4406040 C6C6E2E3 40D5D6E3 40C1E5C1 | D - FFST NOT AVA| C9D3C1C2 D3C54040 00008100 00000000 | ILABLE ..a.....| --------------------------------------------------------- In other cases, a ABEND0C6 in module ISTAPCPS can occur related to VTAM CSDUMP processing. The abend in ISTRACSW prevented future CSDUMP commands from capturing a dump, the CSDUMP command will complete, but no dump is taken. The abend in ISTAPCPS caused a corruption of an RDTE chain which resulted in VTAM NOS (ISTNOSxx) component abends when VTAM displays are issued which run the RDTE chain and hit the corrupted RDTE. NOS abends were seen in ISTNOCLS and ISTNOCDD. Additonal information: Overlay area is pointed ATCMSGFP. ATCMSGFP is pointed by ATCVT + X'220'.
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: * * All * **************************************************************** * PROBLEM DESCRIPTION: * * ABEND0C4 in module istracsw or ABEND0C6 * * in module istapcps. * **************************************************************** * RECOMMENDATION: * * Apply the provided PTF. * **************************************************************** This problem may be described as follows: 1. VTAM detected an error from the network. It disabled the VIT to take the FFST dump. It called ISTRACZX to enable the VIT. ISTRACZW used the working storage area RACZWKA pointed by ATCMSGFP. 2. An operator issued Modify CSDUMP command to take the dump of VTAM with the default dump option. 3. Module ISTRACSW received control to process the Modify CSDUMP command. This module uses the same work area RACZWKA pointed by ATCMSGFP. It did not clear the work area before using it. This caused the ABEND0C4 in the module ISTRACSW.
Problem conclusion
ISTRACSW has been changed to clear the work area before using it.
Temporary fix
Comments
APAR Information
APAR number
OA48040
Reported component name
VTAM V4 MVS/ESA
Reported component ID
569511701
Reported release
210
Status
CLOSED PER
PE
NoPE
HIPER
YesHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2015-06-03
Closed date
2015-06-23
Last modified date
2015-08-03
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UA77854 UA77855
Modules/Macros
ISTRACSW
Fix information
Fixed component name
VTAM V4 MVS/ESA
Fixed component ID
569511701
Applicable component levels
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"210","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SSCY4DZ","label":"DO NOT USE"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"210","Edition":"","Line of Business":{"code":"","label":""}}]
Document Information
Modified date:
03 August 2015