LI77306: START IP PORT FAILS ON UNNECESSARY DNS LOOKUP

Subscribe

You can track all active APARs for this component.

APAR status

  • Closed as program error.

Error description

  • Communications Server for Linux
    -------------------------------
    The command "snaadmin start_port,port_name=IPP0" fails with:
    start_port command failed :
    primary_rc = CANCELLED, secondary_rc = NO_SECONDARY_RC
    

Local fix

Problem summary

  • USERS AFFECTED: All users of Enterprise Extender (HPR/IP) links.
    
    PROBLEM DESCRIPTION:
    An IP port can not be activated if a local IP address is
    explicitly configured that cannot be decoded into a hostname.
    
    PROBLEM SUMMARY:
    This is too restrictive. CommServer does not need the local
    hostname when the IP address has been explicitly configured.
    This can occur with any interface that is not associated with
    the local hostname.
    

Problem conclusion

  • Code has been modified to remove this restriction in cases where
    knowing the local hostname is not necessary.
    

Temporary fix

  • snadaemon
    

Comments

APAR Information

  • APAR number

    LI77306

  • Reported component name

    CS FOR LINUX

  • Reported component ID

    5724I3300

  • Reported release

    623

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2013-04-26

  • Closed date

    2013-04-26

  • Last modified date

    2013-04-26

  • APAR is sysrouted FROM one or more of the following:

    LI76665

  • APAR is sysrouted TO one or more of the following:

Fix information

  • Fixed component name

    CS FOR LINUX

  • Fixed component ID

    5724I3300

Applicable component levels

  • R623 PSY

       



Rate this page:

(0 users)Average rating

Document information


More support for:

Communications Server for Linux

Software version:

623

Reference #:

LI77306

Modified date:

2013-04-26

Translate my page

Machine Translation

Content navigation