IV29741: OM6110 ADAPTER (OPTERA6110_V3) ONLY HAS DC CARDS DISCOVERED, NO AC

APAR status

• Closed as fixed if next.

Error description

• There is an issue with our OM6110 adapter (Optera6110_v3). It
  appears to be only populating the DC cards in the database and
  not the AC cards.
  
  Please see the  comments below:
  
  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
  +-+-+-+-
  Power supply in DC_DEV is DC, in AC_DEV is AC.
  
  Looks like ITNM does not record AC power supply but it does
  record DC power supply.
  
  TID                     SLOTID     TYPE           NATIVEID
   --------------------   ---------  -------------  ------------
   DC_DEVONBNO03CPE1M0001  -1         SP_VCARD       SP-1-3
   DC_DEVONBNO03CPE1M0001  1          PSU_CARD       PSU-1-1
   DC_DEVONBNO03CPE1M0001  2          16XE1DS1_CARD  16XE1DS1-1-2
   DC_DEVONBNO03CPE1M0001  3          2X155M_CARD    2X155M-1-3
   DC_DEVONBNO03CPE1M0001  4          8XETH_CARD     8XETH-1-4
  
  Command:
      TL1Message= RTRV-EQPT:DC_DEVONBNO03CPE1M0001:ALL:951699;
  
  Response:
  
  "CHASSIS-1-0::SER=\"NNTMDAV0591V\",PEC=\"NT6Q00ACE5\",CLEI=\"SOM
  8D10FRB\",REL=\"03\",CTYPE=card_BackPlane,:IS,ACT"
  
  "PSU-1-1::SER=\"NNTMDAV052NK\",PEC=\"NT6Q30MAE5\",CLEI=\"SOUPABV
  GAA\",REL=\"01\",CTYPE=card_PSU,:IS,ACT"
     "16XE1DS1-1-2::SER=\"\",PEC=,CLEI=\"\",REL=\"
  \",CTYPE=card_TA01,:IS,ACT"
     "2X155M-1-3::SER=\"\",PEC=,CLEI=\"\",REL=\"
  \",CTYPE=card_TXC1,:IS,ACT"
  
  "8XETH-1-4::SER=\"NNTMDAV05334\",PEC=\"NT6Q13ACE5\",CLEI=\"SOUIA
  Z1DAA\",REL=\"03\",CTYPE=card_TP01,:IS,ACT"
  
  "P155M-1-3-1::PEC=\"NTTP04CF\",CLEI=\"WMOTCWAJAB\",SER=\"EXLGCN0
  Y62313054\",:IS,ACT"
  
  
  TID                     SLOTID     TYPE           NATIVEID
   --------------------   ---------  -------------  ------------
   AC_DEVONEZO01CPE1M0001  -1         SP_VCARD       SP-1-3
   AC_DEVONEZO01CPE1M0001  2          16XE1DS1_CARD  16XE1DS1-1-2
   AC_DEVONEZO01CPE1M0001  3          2X155M_CARD    2X155M-1-3
  
     TL1Message= RTRV-EQPT:AC_DEVONEZO01CPE1M0001:ALL:951750;
  
  
  "CHASSIS-1-0::SER=\"NNTMDAV04M8P\",PEC=\"NT6Q00ACE5\",CLEI=\"SOM
  8D10FRB\",REL=\"03\",CTYPE=card_BackPlane,:IS,ACT"
  
  "ACPSU-1-1::SER=\"NNTMDAV04MEB\",PEC=\"NT6Q31AAE5\",CLEI=\"SOUPA
  AYGAB\",REL=\"02\",CTYPE=card_ACPSU,:IS,ACT"
     "16XE1DS1-1-2::SER=\"\",PEC=,CLEI=\"\",REL=\"
  \",CTYPE=card_TA01,:IS,ACT"
     "2X155M-1-3::SER=\"\",PEC=,CLEI=\"\",REL=\"
  \",CTYPE=card_TXC1,:IS,ACT"
  
  "P155M-1-3-1::PEC=\"NTTP02ED\",CLEI=\"BAOUS4NGAA\",SER=\"EXLGJPE
  X50630364\",:IS,ACT"
  

Local fix

• N/A
  

Problem summary

• Error description
  Current OM6110 adapter does not support discovery of AC Power
  Supply Units
  
  Local fix
  None
  
  Problem summary
  Based on the pattern output of the RTRV-EQPT TL1 command, the
  current OM6110 adapter is configured to discover DC power supply
  units with pattern such as
      "PSU-1-1::....".
  
  The AC power supply unit is not discovered since its pattern is
  in the form of
   "ACPSU-1-1::..."
  
  Problem conclusion
  The pattern of the AC power supply unit needs to be configured
  as one of the recognized TL1 output patterns on the RTRV-EQPT
  message.
  
  Temporary fix
  None
  
  Comments
  The fix for this issue will be included in the next enhancement
  release for OM6110 v4, (RFE 26573). The estimated release for
  RFE 26573 is 2nd quarter of 2013
  

Problem conclusion

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels

• R560 PSY

     UP