HD49401: 2D-3D DESIGN / 3D DISPLAY IN PRODUCT LAYOUT WINDOW DISAPPEARS O N CLOSING CATPRODUCT WINDOW.

 

APAR status

  • Closed as program error.

Error description

  • 2D-3D DESIGN / 3D DISPLAY IN PRODUCT
    LAYOUT WINDOW DISAPPEARS ON CLOSING
    CATPRODUCT WINDOW.
    .
    1. Open CATProduct.
    2. Double click Front view. Layout - CATProduct
    window appears.
    3. Activate CATProduct window.
    4. Click close button - Close CATProduct window.
    .
    

Local fix

Problem summary

  • 2D-3D DESIGN / 3D DISPLAY IN PRODUCT LAYOUT WINDOW DISAPPEARS O
    N CLOSING CATPRODUCT WINDOW.
    2D-3D DESIGN / 3D DISPLAY IN PRODUCT
    LAYOUT WINDOW DISAPPEARS ON CLOSING
    CATPRODUCT WINDOW.
    .
    1. Open CATProduct.
    2. Double click Front view. Layout - CATProduct
    window appears.
    3. Activate CATProduct window.
    4. Click close button - Close CATProduct window.
    .
    

Problem conclusion

  • THIS PROBLEM WILL BE FIXED ON CATIA VERSION
    5 RELEASE 17 GA level.
    NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
    ON V5R16SP04.
    .
    Incident Diagnosis
    .
    When visualizing a product structure, one must
    call CATPrdServicesUI to register itself as a
    visualizer of the product structure. This wasn't
    done by the 2DLayout window so when the 3D
    window was closed, product structure considered
    that there was no more visualization of the product
    and destructed it.
    .
    Correction Explanation
    .
    Now the 2DLayout window registers itself as a
    product structure visualization.
    .
    

Temporary fix

Comments

APAR Information

  • APAR number

    HD49401

  • Reported component name

    CATIA V5 NT>XP

  • Reported component ID

    569151000

  • Reported release

    516

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2006-02-08

  • Closed date

    2006-03-03

  • Last modified date

    2006-04-12

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

Fix information

  • Fixed component name

    CATIA V5 NT>XP

  • Fixed component ID

    569151000

Applicable component levels

  • R516 PSN SP51604

       UP06/04/11 I 1000

Rate this page:

(0 users)Average rating

Document information


More support for:

CATIA V5

Software version:

516

Reference #:

HD49401

Modified date:

2006-04-12

Translate my page

Machine Translation

Content navigation