HD17243: APPLICATION ATTRIBUTES ARE NOT SEEN WHEN PAD SIZE IS CHANGED

 

APAR status

  • Closed as program error.

Error description

  • Application attributes are not seen when Pad size is
    changed
    .
    After defining the app. attributes on some faces
    and changing the dimension, all app. attributes can
    be lost!!!.
    You can reproduce it as follows:
    1) create a PAD
    2) add some app. attr. at the top face or side face
    3) change the size of the PAD
    --> check the app. attr you defined, you will see
    nothing.
    .

Local fix

Problem summary

  • Application attributes are not seen when Pad size is changed
    Application attributes are not seen when Pad size is
    changed
    .
    After defining the app. attributes on some faces
    and changing the dimension, all app. attributes can
    be lost!!!.
    You can reproduce it as follows:
    1) create a PAD
    2) add some app. attr. at the top face or side face
    3) change the size of the PAD
    --> check the app. attr you defined, you will see
    nothing.
    .

Problem conclusion

  • THIS PROBLEM WILL BE FIXED ON CATIA VERSION
    5 RELEASE 14 GA level.
    NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
    ON V5R12SP02 AND V5R13SP02.
    .
    Incident Diagnosis
    Impossible to find some brep attributes after an
    update.
    .
    Correction Explanation
    This problem is a regression introduiced by the
    performance modification to accelerate the search
    of the brep attributes.
    .
    Answer and By-Pass
    With the delivered correction, the pb is no longer
    reproductible
    .

Temporary fix

Comments

APAR Information

  • APAR number

    HD17243

  • Reported component name

    CATIA V5/NT/200

  • Reported component ID

    569151000

  • Reported release

    512

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2004-02-03

  • Closed date

    2004-02-17

  • Last modified date

    2009-06-24

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

Fix information

  • Fixed component name

    CATIA V5/NT/200

  • Fixed component ID

    569151000

Applicable component levels

  • R512 PSN

       UP

  • R513 PSN SP51302

       UP04/03/22 N 1000

Rate this page:

(0 users)Average rating

Add comments

Document information


More support for:

CATIA V5

Software version:

512

Reference #:

HD17243

Modified date:

2009-06-24

Translate my page

Machine Translation

Content navigation