Loss of Access When Using Hitachi Storage Systems With V188.8.131.52 and V1.4
An issue has been identified that will cause a loss of access to all managed disks on some Hitachi storage systems when running SAN Volume Controller V184.108.40.206, Storwize V7000 V220.127.116.11 or Storwize V7000 Unified V1.4
V18.104.22.168 of SVC and Storwize V7000 software, and V1.4 of Storwize V7000 Unified will be unable to communicate with managed disks on any Hitachi storage systems which use the SCSI Inquiry Data "DF600F"
The list of affected Hitachi storage systems include, but are not limited to:
- AMS 2500
- AMS 2100
To check if any storage systems connected to your SVC or Storwize V7000 system could be affected, run the svcinfo lscontroller command and look for the look for the string "DF600F" in the output, as in the example below.
id controller_name ctrl_s/n vendor_id product_id_low product_id_high
6 controller6 830124870000 2B HITACHI DF600F
The SAN Volume Controller and Storwize V7000 upgrade test utility version 9.6 or later will check for affected storage systems when upgrading to V22.214.171.124. The Storwize V7000 Unified upgrade test utility will be updated in the near future.
If you are using one of the affected storage systems then you should not upgrade to V126.96.36.199 or V1.4
Any customer who has upgraded and experienced an issue with these controllers should contact IBM Support for a recovery action plan.
This issue was resolved by APAR IC89206 in the V188.8.131.52 PTF release
This issue is also fixed in IBM Storwize V7000 Unified V184.108.40.206
|Disk Storage Systems||IBM Storwize V7000 (2076)||6.4||IBM Storwize V7000||6.4|
|Disk Storage Systems||IBM Storwize V7000 Unified (2073)||1.4||IBM Storwize V7000||1.4|