IBM Support

Recommended IPDS Port Number Values for *LAN IPDS Device Descriptions

Troubleshooting


Problem

This document contains a list of recommended IPDS Port Number Values for *LAN IPDS printer device descriptions depending on the type of network interface or print server being used with your printer.

Resolving The Problem

This document contains a list of recommended IPDS Port Number Values for *LAN IPDS printer device descriptions, depending on the type of network interface or print server being used with your printer.

The Port number (PORT) parameter specifies which TCP/IP port to use when printing operating system spooled files from an IBM System i system through a *LAN IPDS device description to a printer on a Local Area Network (LAN) or Wide Area Network (WAN). Therefore, the specified TCP/IP port must be open on any firewalls, routers, or SOCK servers used between the System i and the printer. If the specified TCP/IP port is closed, the printer writer for the *LAN IPDS device description will be not be able to open a connection with the printer and will, therefore, not be able to print to that printer.

Recommended LAN IPDS Port Numbers

This video describes how to use this document to find the appropriate port number for an IPDS capable printer.

  • - Hardware Requirements for *LAN IPDS Device Descriptions



    There is no guarantee that printers that support *LAN 3812 PJL or *LAN 3812 SNMP device descriptions will also support IPDS (or vice-versa). For a *LAN IPDS device description to work, the following hardware requirements must be met:

     
    1. The printer connected using this print driver must have the IBM IPDS feature or an OEM IPDS SIMM (Single Inline Memory Module) installed in the printer hardware, or must be attached to an external print server that converts an IPDS printer data stream to an ASCII printer data stream (such as HP PCL or Adobe PostScript).

    Note: If the printer has an internal IPDS feature or IPDS SIMM installed, a printer configuration page (generated from the printer itself) will typically indicate that IPDS is installed.
    2. If the printer has an internal IPDS feature or IPDS SIMM installed, an internal print server or network interface card (NIC) must be used as well. The Intelligent Printer Data Stream (IPDS) data stream will not work through a printer's parallel or serial interface.
    3. Some IPDS print servers, such as the iData LAN Brick (also known as an IBM 7913), allow a single IPDS Twinax attached printers to be connected to an Ethernet or token-ring LAN.
  • - List of Recommended Port Number Values for *LAN IPDS Device Descriptions



    Notes:

    1. The port number value is dependent on the print server, sometimes called a LAN adapter or Network Interface (NIC) card, not the printer hardware. If the printer has an internal print server, you may need to contact the manufacturer of your printer or your printer vendor to find out the model of print server used.
    2. The following list is not intended to be all inclusive.
    Network Interface or System Type Port Number
    Argecy ACC 6xe Coax/Twinax to Ethernet print server 5001
    Axis 670e Host-to-LAN print server
    Axis 5570e Host-to-LAN print server
    Axis 5670e Host-to-LAN print server
    5001
    Note: These Axis print servers convert the IPDS data stream to an HP PCL or PostScript, so they are only supported with laser printers.
    Axis LAN Adapters (other models) No IPDS Support
    Black Box Ethernet IPDS (PC430A) Print Server 5001
    Castelle LANPress 2+1MP Unknown at this Time
    Creo WinIPDS Lite
    Creo WinIPDS Pro
    Port range unknown but port 5001 is the default port when IPDSprinter emulation is configured for a single printer.
    One unique port per configuration.
    Decision Data printers with built-in print server 5001
    Epson Multiprotocol 10/100 Ethernet, Type B No IPDS Support
    Extended Systems No IPDS Support
    Gestetner printers 5001
    HP JetDirect Card (Internal) 9100
    HP JetDirect Server (External)
    (3 ports - 1 I/P address)
    No IPDS Support
    HP LaserJet printers (with internal HP JetDirect print server) 9100
    IBM 3116 (with internal Lexmark Marknet print server) 9100
    IBM 3130
    IBM 3160
    5001
    IBM 4247 (with internal Ethernet print server) 5001
    IBM 4400 (with internal Ethernet print server) 5001
    IBM 6400 (with Enhanced Ethernet Adapter) 5001
    Note: Check the ETHERNET PARAMETERS MENU in the printer hardware and use the value specified in the IPDS DATA PORT NUMBER parameter. If this is set to 0, then set it to 5001 and save the Custom Set.
    IBM iSeries 400 (attached to another iSeries 400) No IPDS Support
    IBM Infoprint 802.11 wireless to USB Print Server (External) No IPDS Support
    IBM Infoprint Color 8 (IBM 4308) 9100
    IBM Infoprint 12 (4912) 9100
    IBM Infoprint 21 (4322) 5001
    IBM Infoprint 20 (4320)
    IBM Infoprint 32 (4332)
    IBM Infoprint 40 (4340)
    5001
    IBM Infoprint 60 (3160)
    IBM Infoprint 70 (3160)
    5001
    IBM Infoprint 1100 Series:
    IBM Infoprint 1116
    IBM Infoprint 1120
    IBM Infoprint 1125
    IBM Infoprint 1130
    IBM Infoprint 1140
    IBM Infoprint 1145
    9600 or 9100
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    IBM Infoprint 1200 and Color 1200 Series:
    IBM Infoprint 1222
    IBM Infoprint 1226
    IBM Infoprint Color 1220
    IBM Infoprint Color 1228
    5001, 9600 or 9100
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    IBM Infoprint 1300 and Color 1300 Series:
    IBM Infoprint 1312
    IBM Infoprint 1332
    IBM Infoprint 1352
    IBM Infoprint 1372
    IBM Infoprint Color 1334
    IBM Infoprint Color 1354
    IBM Infoprint Color 1354L
    IBM Infoprint Color 1357
    5001, 9600 or 9100
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    IBM Infoprint 1400, 1400 MFP and Color 1400 Series:
    IBM Infoprint 1410 MFP
    IBM Infoprint 1412
    IBM Infoprint 1422
    IBM Infoprint Color 1454
    IBM Infoprint Color 1464
    5001, 9600 or 9100
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    IBM Infoprint 1500, 1500 MFP and Color 1500 Series:
    IBM Infoprint 1532 Express
    IBM Infoprint 1540 MFP
    IBM Infoprint 1552
    IBM Infoprint 1560 MFP
    IBM Infoprint 1570 MFP
    IBM Infoprint 1572
    IBM Infoprint 1580 MFP
    IBM Infoprint 1585
    IBM Infoprint Color 1567
    5001, 9600 or 9100
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    IBM Infoprint 2085 (2785)
    IBM Infoprint 2090 (2705)
    IBM Infoprint 2090ES (2790)
    IBM Infoprint 2105 (2705)
    IBM Infoprint 2105ES (2790)
    IBM Infoprint 2190
    IBM Infoprint 2210
    IBM Infoprint 2235
    5001
    IBM Infoprint 3000
    IBM Infoprint 4000
    IBM Infoprint 4100
    5001
    IBM Infoprint 6500 (with internal Ethernet print server) 5001
    Note: Check the ETHERNET PARAMETERS MENU in the printer hardware and use the value specified in the IPDS DATA PORT NUMBER parameter. If this is set to 0, then set it to 5001 and save the Custom Set.
    IBM Infoprint Manager for NT/2000 5001
    IBM Integrated Network Option
    (IBM 4039, 4049, 3112, 3116)
    Unknown at this Time
    IBM Network Print Server (NPS) Unknown at this Time
    IBM Network Printer 12, 17 and 24
    (IBM 4312, 4317, and 4324)
    5001
    IBM RS/6000 (printer attached to RS/6000 system) No IPDS Support
    i-data 7913 LAN Brick 5001
    i-data PlusCom or LinkCom (internal) Unknown at this Time
    i-data EasyCom, PlusCom or LinkCom (external) No IPDS Support
    I-O 5435 AFP/IPDS Print Server
    I-O 5435e AFP/IPDS Print Server
    I-O 5435dp AFP/IPDS Print Server
    (one Ethernet attached printer)
    5001
    I-O 5755 IPDS Printer Gateway
    I-O 5755e IPDS Printer Gateway
    (up to three Ethernet attached printers)
    5001
    5002
    5003
    I-O LAN RPC Print Server 5001
    InfoPrint 802.11 wireless to USB Print Server (External) No IPDS Support
    InfoPrint 1500, 1500 MFP and Color 1500 Series:
    InfoPrint 1532 Express
    InfoPrint 1540 MFP
    InfoPrint 1552
    InfoPrint 1560 MFP
    InfoPrint 1570 MFP
    InfoPrint 1572
    InfoPrint 1580 MFP
    InfoPrint 1585
    InfoPrint Color 1567
    5001, 9600 or 9100
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    InfoPrint 1600, 1600 MFP and Color 1600 Series:
    InfoPrint 1612 Express
    InfoPrint 1622 Express
    InfoPrint 1650 MFP
    InfoPrint Color 1634 Express
    5001, 9600 or 9100
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    InfoPrint 1700, 1700 MFP and Color 1700 Series:
    InfoPrint Color 1759 MFP
    InfoPrint Color 1764 MFP
    InfoPrint Color 1769 MFP
    InfoPrint Color 1754 Express
    InfoPrint Color 1764
    InfoPrint Color 1767
    5001, 9600 or 9100
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    InfoPrint 1800, 1800 MFP and Color 1800 Series:
    InfoPrint 1811
    InfoPrint 1812
    InfoPrint 1822
    InfoPrint 1832
    InfoPrint 1850 MFP
    InfoPrint 1852
    InfoPrint 1860 MFP
    InfoPrint 1872
    InfoPrint 1870 MFP
    InfoPrint 1880 MFP
    InfoPrint Color 1824
    InfoPrint Color 1826 MFP
    5001 or 9600 (no IPDS support on 9100)
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    InfoPrint 1900, 1900 MFP and Color 1900 Series:
    InfoPrint 1930 MFP
    InfoPrint 1940 MFP
    InfoPrint 1948 MFP
    InfoPrint 1968 MFP
    InfoPrint 1985
    InfoPrint 1988 MFP
    5001 or 9600 (no IPDS support on 9100)
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    InfoPrint 2000, 2000 MFP and Color 2000 Series:
    InfoPrint C2047
    InfoPrint C2057 MFP
    InfoPrint C2065
    InfoPrint C2075 MFP
    5001 or 9600 (no IPDS support on 9100)
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    InfoPrint Cutsheet Printer Series:
    InfoPrint 2190
    InfoPrint 2210
    InfoPrint 2235
    InfoPrint EMP156
    InfoPrint Pro C900
    5001
    InfoPrint Production Printer Series:
    InfoPrint 75
    InfoPrint 100
    InfoPrint 3000
    InfoPrint 4000
    InfoPrint 4100
    InfoPrint 5000
    5001
    InfoPrint Industrial Printer Series:
    InfoPrint 4247 multiform
    InfoPrint 4247-L03 multiform
    InfoPrint 4247-X03 multiform
    InfoPrint 4247-Z03 multiform
    Infoprint 6500
    InfoPrint 6700 mid-volume
    InfoPrint 6700
    (with internal Ethernet print server)
    5001
    Note: Check the ETHERNET PARAMETERS MENU in the printer hardware and use the value specified in the IPDS DATA PORT NUMBER parameter. If this is set to 0, then set it to 5001 and save the Custom Set.
    Infotec printers 5001
    Intel NetportExpress 10/100 (single-port) No IPDS Support
    Intel NetportExpress 10/100 (3-port) No IPDS Support
    Intel NetportExpress PRO and PRO/100 Unknown at this Time
    Intel NetportExpress XL and EL Unknown at this Time
    IntelliTech IntelliBar AS Label Printers
    IntelliBar Model 48AS N
    IntelliBar Model 412AS N
    IntelliBar Model 88AS N
    Unknown at this Time
    JETNet Card Unknown at this Time
    Kyocera IB20 (internal) Unknown at this Time
    Lanier printers 5001
    Lexmark MarkNet N8050 802.11g Wireless Print Server (Internal) Unknown at this Time
    Lexmark MarkNet XL (Internal) 9100
    Lexmark MarkNet XLe or PRO (External) No IPDS Support
    Lexmark MarkNet N2050 802.11b/g Wireless Network Card (Internal) Unknown at this Time
    Lexmark N4050e 802.11g Wireless Print Server (External) No IPDS Support
    Lexmark IPDS laser printers (with internal Lexmark print server) from 2009 or later:
    Lexmark T65x Series Monochrome laser printers
    Lexmark X65x Series MFPs
    Lexmark C73x Series Color Laser Printers
    Lexmark X73x Series MFPs
    Lexmark E46x Series Monochrome laser printers
    Lexmark X46x Series MFPs
    Lexmark X86x Series MFPs
    Lexmark X792 Color MFP
    Lexmark X925 Color MFP
    5001, 9600
    Lexmark Optra (with internal Lexmark Marknet print server) laser printers prior to 2009 9600, 5001 or 9100
    Note: See the section titled Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPSeries and Lexmark Laser Printers below.
    Lantronix Print Server 3001
    Meto Printers (from Checkpoint Systems, Inc) 5001
    MPI Tech Blue Kit IPDS for HP
    MPI Tech Blue Kit IPDS for Lexmark
    MPI Tech Blue Kit IPDS for Xerox
    9100
    MPI Tech Blue Server 5001 - 9999, one unique port per configuration
    MPI Tech EasyCom III
    MPI Tech EasyCom III IPDS
    5001
    MPI Tech EasyCom Xpress EIO (Internal)
    MPI Tech EasyCom Xpress PSIO (Internal)
    5001
    MPI Tech EasyCom Xpress (External)
    MPI Tech PlusCom Xpress (External)
    No IPDS Support
    MPI Tech EasyCom Xpress IPDS Matrix Unknown at this Time
    MPI Tech ida 9130-03 LAN Brick for Token Ring
    MPI Tech ida 9130-04 LAN Brick for Ethernet
    MPI Tech i-data 7913-03 IPDS Printer LAN Attachment (T/R)
    5001
    MPI Tech LinkCom III S (External)
    MPI Tech LinkCom III S EIO (Internal)
    MPI Tech LinkCom IV (External)
    5001
    Osicom JetXPrint (Internal) Unknown at this Time
    Osicom NetPrint (External) No IPDS Support
    Nashuatec printers 5001
    Printronix Printers with Printronix PrintNet adapters 5001
    Rex-Rotary printers 5001
    Ricoh printers 5001
    Savin printers 5001
    Solimar Systems software 5001
    Unix Systems (Printer Attached to Unix System) No IPDS Support
    Windows 95, 98 or NT (Printer Attached to a PC) No IPDS Support
    Xerox IPDS Laser Printers 5001
  • - Configuring the Printer and Print Server Hardware



    The success of *LAN IPDS device descriptions is dependent on the configuration settings on the operating system and on the printer and print server hardware. For more information about configuring the time-out values on the printer and print server hardware and common error messages that you can receive when printing through a *LAN IPDS device description, please refer to the following document:

    Configuration Settings and Error Messages for *LAN IPDS Device Descriptions:

  • - Information Concerning IBM Infoprint, InfoPrint Solutions and Lexmark IPDS Laser Printers



    Note: In most cases port 9600 has better connectivity than port 9100 for IBM Infoprint 1100, 1200, 1300, 1400 and 1500 Series printers. However, some newer IBM Infoprint and InfoPrint printers may use port 9600 for unsecure IPDS connections and port 5001 for secure IPDS connections. Also, port 9100 is no longer supported starting with the InfoPrint 1800 Series printers, due to communication failures experienced using that port. Therefore, port 5001 or port 9600 should be used instead of port 9100 for InfoPrint 1800 Series printers and for any newer InfoPrint printers to come.

    If error message PQT3621 - The session with device &8 ended abnormally, occurs after printing about 100 pages of a spooled file, and the failing printer is an IBM Infoprint 1xxx Series printer, and InfoPrint 1xxx Series printer or a Lexmark laser printer, try using the following steps to use port 9600 rather than port 9100. If the printer will not print at all after going through these steps, then switch back to port 9100. The steps are:

     
    1. End the writer, if it is not already ended.
    2. Vary off the printer device description.
    3. Change the IPDS Timeout setting in the printer hardware from "Host controlled" to 15 (seconds). This setting is found in the IPDS MENU on the IBM Infoprint 1100 or 1200 Series printer or Lexmark Optra printer.
    4. Change the IPDS Port setting in the printer hardware from 9100 to 9600. This setting is also found in the IPDS MENU on the IBM Infoprint 1100 or 1200 Series printer or Lexmark Optra printer.

    Note: The IPDS Port setting is not available for all models of IBM Infoprint 1100 or 1200 or Lexmark Optra printers. If this setting is not found, skip this step and proceed to the next step.
    5. Change the Port number (PORT) parameter in the *LAN IPDS device description from 9100 to 9600 to match the change in the printer hardware.
    6. Vary the printer device description back on.
    7. Start the writer.

[{"Type":"MASTER","Line of Business":{"code":"LOB57","label":"Power"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SWG60","label":"IBM i"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.1.0"}]

Historical Number

24475739

Document Information

Modified date:
03 November 2021

UID

nas8N1019440