Troubleshooting
Problem
When recovering a system to a different system using BRMS, if the options are not selected to restore the system information, no recovery information will be shown when doing a STRRCYBRM ACTION(*RESTORE)
Resolving The Problem
When recovering a system to a different system using BRMS, if the options are not selected to restore the system information, no recovery information will be shown when doing a STRRCYBRM ACTION(*RESTORE) . In the BRMS recovery report, QP1ARCY, the following step contains the process on how to get the recovery information to show up on the system:
__ STEP 007 : Update System Name in BRMS Media Information
Start date/time __________________ Stop date/time __________________ Duration _________________
BRMS uses the network identifier and default local location name from
the system network attributes to assign a system owner to saved items
and the media containing those saved items.
The network attributes for the saved system are:
Local network ID . . . . . . . . . . .: XXXXXX
Default local location . . . . . . . .: YYYYYY
Display the network attributes of the recovery system.
To do so, type the following command and press "Enter".
DSPNETA
Record the network attributes of the recovery system:
Local network ID . . . . . . . . . . .: ____________________
Default local location . . . . . . . .: ____________________
If the local network identifier or default local location for the
saved system are different from the recovery system and the recovery
system is correct, you must change the system owner of the saved
items and media in the BRMS history to match the network attributes.
To do so, type the following command and press "Enter".
INZBRM OPTION(*CHGSYSNAM) PRVSYSNAM(XXXXXX.YYYYYY ) NEWSYSNAM(*LCL)
----- Attention ---------------------------------------------------
Be sure to specify a fully qualified name for the saved system
using "local-network-id.default-local-location" format.
---------------------------------------------------------------------
If the local network identifier or default local location for the
saved system are different from the recovery system and the saved
system is correct, you must change the network attributes of the
recovery system to match the system owner of the saved items and
media in the BRMS history.
To do so, type the following command and press "Enter".
CHGNETA LCLNETID(XXXXXX ) SYSNAME(YYYYYY)
However, the command listed at the end is incorrect. The correct command that needs to run is as follows:
CHGNETA LCLNETID(XXXXXX ) LCLLOCNAME(YYYYYY )
and then the user needs to sign off and on again, and run STRRCYBRM ACTION(*RESTORE)
Historical Number
515823575
Was this topic helpful?
Document Information
Modified date:
11 November 2019
UID
nas8N1013153