IBM Support

SI64250 - BRM-MAINT-INCORROUT Fixes-June 2017

PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

BRM-MAINT-INCORROUT Fixes-June 2017


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
1. In 7.1 and later, BRMS has been enhanced to support the new
3592 densities: *FMT3592B5 and FMT3592B5E.
2. Internal enhancement.
3. Internal enhancement.
4. In 7.2 and later, when saving an object list, MSGCPI3710 may
be posted when all objects in a library are set to be omitted.
5. In 7.1 and later, when *LOAD is specified in a backup control
group that has *AVAIL set for Minimum and Maximum Parallel
device resources, BRMS may post MSGBRM1483.
6. In 7.1 and later, BRMS has been enhanced to better support
spooled files when running INZBRM OPTION(*CHGSYSNAM).
7. In 7.1 and later, when volume priority is set, SAVSAVFBRM may
post MSGSQL0204 and MSGSQL0403.
8. In 7.1 and later, STRRCYBRM may post messages MSGCPF5387 and
MSGSQL0811.
9. In 7.1 and later, expired cloud non turn-key volumes are not
being selected for backup and may fail with message MSGBRM148A.
10. Internal enhancement.
11. In 7.1 and later, in BRMS GUI client, setting the values in
'Edit Disk Pool Group' to 'No threshold' for 'Low storage
threshold' and 'High storage threshold' may not be reflected
correctly in WRKCLSBRM TYPE(*ASP).
12. In 7.2 and later, using WRKLNKBRM OUTPUT(*PRINT) with a date
range may show additional saves that are out of the date range..
13. In 7.1 and later, parallel restores from a duplicated saved
item may result in MSGCPF415E.
14. In 7.3, the BRMS recovery report QP1ARCY may show the
incorrect sequence for parallel saved items.
15. Internal enhancement.
16. In 7.1 and later, STRRCYBRM USESAVF(*YES) does not list save
file recovery items.
17. In 7.1 and later, using the BRMS client, when restoring
spooled files, BRMS will restore all selected spooled files and
ignore restores of spooled files that already exist.
18. In 7.1 and later, if the volume being deleted is a cloud
volume, BRMS will try to delete the cloud volume in the cloud
before deleting the volume in the BRMS data base.
19. In 7.1 and later, BRMS non cloud backups post MSGBRM4106 and
MSGBRM148A.
20. In 7.1 and later, when INZBRM OPTION(*DEVICE) is run, BRMS
incorrectly changes control group entries that  have  '*' for
the ASP device to *SYSBAS.
21. In 7.1 and later, STRMNTBRM RGZBRMDB(*YES) , MSGBRM4128 may
have incorrect alignment.
22. In 7.1 and later, when doing saves of QUSRBRM, BRMS may fail
to update the saved history information in WRKMEDIBRM.
23. Internal enhancement.
24. In 7.3 and later, the BRMS GUI client does not allow some
disk pool properties updates.
25. In 7.1 and later, cloud disaster recovery STRRCYBRM
ACTION(*RESTORE) does not show volumes that were successfully
transferred to the cloud.
26. In 7.1 and later, enhanced the recovery report (QP1ARCY)
section 'Recover BRMS Product and Associated library' to include
the ALWOBJRST(*COMPATIBLE) parameter on the RSTOBJ command.
27. In 7.1 and later, enhanced the performance of WRKMEDIBRM
OUTPUT(*PRINT).
28. In 7.1 and later, running a BRMS created cloud turn key
control group that starts with QCLDBIPL or QCLDBGRP may post
MSGBRM15A7.
29. In 7.1 and later, STREXPBRM may take longer if many
libraries have been deleted from the system.
30. In 7.1 and later, WRKMEDiBRM may display duplicate history
information when page up and down is run multiple times.
31. In 7.1 and later, printing BRMS recovery reports (QP1ARCY)
via the STRRCYBRM or STRMNTBRM commands may be slow.

CORRECTION FOR APAR SE66874 :
-----------------------------
Load and apply this PTF.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


----------------------------------------------------------------
------------------------------------

Enable the BRMS plug-in for System i Navigator Windows/OS
client.
==== Pre-V6R1:
1) Close the System i Navigator application.
2) On the client/PC, uninstall the BRMS plug-in using the
Client

Access Express "Selective Setup" utility:  from the
Windows
"Start", select
"Programs->IBM iSeries Access for Windows->Selective
Setup".

Follow the instructions on the dialogs to uninstall the
BRMS

plug-in.  Notes:
a) On the second dialog, select the radio button "Ignore.
I'm
only going to UN-install components".
b) On the next screen, "Component Selection", open the
System i Navigator folder; a list of all installed
System i Navigator components and plug-ins is displayed.
c) Deselect the BRMS plug-in to uninstall it (if you do
not
see the BRMS plug-in, it was not properly installed);
reboot the PC if requested.
3) Start System i Navigator.
4) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main iSeries
Navigator "File" menu and the "My Connections" folder
context/pop-up menu.  When prompted for the iSeries system
to install from, select the iSeries that has the new BRMS
PTF installed.

=== V6R1 and newer:
1) Close the System i Navigator application.
2) Open a Windows Command Prompt screen.
3) Enter the following command:
cwbinplg /REMOVE=IBM.BRMSPlugin
4) On the client/PC, start the iSeries Navigator.
5) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main System i
Navigator "File" menu and the "My Connections" folder
context/pop-up menu.  When prompted for the iSeries system
to install from, select the iSeries that has the new BRMS
PTF installed.

CIRCUMVENTION FOR APAR SE66874 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI64276 :
=================================================

All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


Please end all BRMS jobs before applying this ptf.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI64276      BRM-BACKUP-MSGBRM4106 - REQUESTED FUNCTION NOT CORRECT
   SI63720      BRM-MAINT-INCORROUT Fixes-Mar 2017
   SI63592      BRM-MAINT-MSGBRM6714 STRMNTBRM LOOPS WITH CORRUPT BRM6714 ME
   SI63086      BRM-MAINT-INCORROUT Fixes-Dec 2016
   SI61153      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI61153      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI59997      BRM-MAINT-INCORROUT Fixes-June 2016
   SI60601      BRM-RECOVERY-THREADS-MSGCPF3878C BRMS RESTORE FROM PARALLEL
   SI57903      BRM-MAINT-INCORROUT Fixes-March 2016
   SI57903      BRM-MAINT-INCORROUT Fixes-Dec 2015

Summary Information

System.............................. i
Models..............................
Release............................. V7R3M0
Licensed Program............... 5770BR1
APAR Fixed.......................... View details for APAR SE66874
Superseded by:...................... View fix details for PTF SI70367
Recompile........................... N
Library............................. QBRM
MRI Feature ........................ NONE
Cum Level........................... C7283730


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

Document information

More support for: i family

Software version: V7R3M0

Operating system(s): OS/400

Reference #: SI64250

Modified date: 13 June 2017