Subscribe to this APAR
By subscribing, you receive periodic emails alerting you to the status of the APAR, along with a link to the fix after it becomes available. You can track this item individually or track all items by product.
APAR (Authorized Program Analysis Report) |
Abstract
REQUIRED PTFS FOR UPGRADING TO V7R1MX
Error Description
The following PTFs for V5R4Mx and V6R1Mx are
required to upgrade to version 7 release 1 modification x,
where x is the modification number of licensed internal code
only. The modification number for IBM i will always be 0,
which may not match the modification level of licensed
internal code. Please review the Preventative Service Planning
(PSP) entries for software installation to determine other PTFs
you may need.
------------------------------------------------------------
Info APAR Contents Last Changed
Conversion impacts
Upgrading using virtual media . . . . . . . . . .03/12/2012
Prepare for Install PTFs
Upgrading using network file system . . . . . . .11/26/2012
IBM System Storage DS8100 and DS8300 actions
Changing primary language during upgrade
Using Electronic Software Delivery (ESD)
Avoiding database cross reference file errors....03/18/2012
Upgrading from V5R4 with 5722DG1 installed
Upgrading from V5R4 with OS managed firmware
------------------------------------------------------------
For determining the impact of conversions that will occur
when upgrading to Version 7 Release 1 from Version 5 Release 4
please review and read Redpaper "i5/OS Program Conversion:
Getting Ready for i5/OS," REDP-4293, from www.redbooks.ibm.com
and Info APAR II14306. These documents list the APARs needed
to evaluate your system prior to the upgrade.
------------------------------------------------------------
For upgrading to Version 7 Release 1 using virtual media, the
following PTFs must be applied:
If you are upgrading from V5R4M0 - SI35849 superseded by SI42903
- MF42600 superseded by MF51693
- MF43154
- MF46264
- MF47159
- MF53830
- MF53547 superseded by MF54341
- MF53832
- MF54338
- MF56994
If you are upgrading from V5R4M5 - SI35849 superseded by SI42903
- MF46288 superseded by MF53640
- MF43157
- MF47160
- MF51308 superseded by MF52757
- MF53717
- MF53630 superseded by MF54314
- MF53812
- MF54287
- MF56929
If you are upgrading from V6R1M0 - SI39390
- SI35186 superseded by SI40473
- SI35189 superseded by SI44484
- MF43198
- SI45603
- MF46292
- MF47203
- MF51355 superseded by MF53927
- MF53936
- MF53937 superseded by MF54327
- MF53938
- MF53949
If you are upgrading from V6R1M1 - SI39390
- SI35186 superseded by SI40473
- SI35189 superseded by SI44484
- SI45603
- MF47204
- MF51455
- MF53863 superseded by MF54350
- MF53864
- MF53865
- MF54034
If you are upgrading from V7R1M0 - MF50235
- SI41276
- SI45600
- MF51411
- MF53917 superseded by MF54351
- MF53918
- MF53919
- MF54011
In addition, if an iASP is configured on the system being
upgraded using virtual media, PERM apply the following:
If you are upgrading from V5R4M0 - MF50209
If you are upgrading from V5R4M5 - MF50210
If you are upgrading from V6R1M0 - MF50211
If you are upgrading from V6R1M1 - MF50918
--------------------------------------------------------------
The following Prepare for Install PTFs are needed:
If you are upgrading from V5R4Mx - SI42214
If you are upgrading from V6R1Mx - SI42213
--------------------------------------------------------------
For upgrading using virtual media, from virtual optical storage
on a Network File System (NFS) server, to Version 7 Release 1,
the following PTFs must be applied to the system being
installed:
If you are upgrading from V6R1M0 - SI39400
- SI39390
- SI35189
- SI35747
- SI45957
- MF47284
- MF47285
- MF46292
If you are upgrading from V6R1M1 - SI39400
- SI39390
- SI35186
- SI35189
- SI35747
- SI45957
If you are upgrading from V7R1M0 - SI45988
The following PTFs must be applied on the NFS server containing
the install virtual optical images:
If your image server is at V6R1M0 - SI39216
- SI39390
- SI35189
- SI35747
- MF47284
- MF47285
- MF46292
If your image server is at V6R1M1 - SI39216
- SI39390
- SI35186
- SI35189
- SI35747
If your image server is at V7R1Mx - SI39238
- SI45600
For information on how to upgrade from virtual optical
storage using the Network File System including client ethernet
adapter considerations, please refer to the following PDF
link URL:
ftp://ftp.software.ibm.com/systems/support/power/i/nfs_optical
_upgrade.pdf
--------------------------------------------------------------
IBM System Storage DS8100 and DS8300 actions
IBM System Storage? DS8100? and DS8300? systems that are not
at a current version of firmware will experience problems when
Collection Services collects the new external storage metrics
(*EXTSTG category data) that have been added in the 7.1
release. These problems include hardware failure notifications,
loss of access to data, and DS8100/DS8300 system crashes.
To prevent these problems you need to install a level of
DS8100/DS8300 microcode that fixes these problems prior to
installing IBM i 7.1.
-- The code fix is available in Release 4.3x Bundle
64.30.99.0 or higher.
-- The code fix is available in Release 4.2x Bundle
64.21.29.0.
For more information refer to the following link titled
"Potential loss of access to data due to Link Statistics
commands":
http://www-01.ibm.com/support/docview.wss?uid=ssg1S1003640
--------------------------------------------------------------
If upgrading to Version 7 Release 1 using IBM supplied media,
using the automatic install process, and changing your primary
language, the following PTFs must be applied to allow you to
set the install language:
If you are upgrading from V5R4Mx - SI38038
If you are upgrading from V6R1Mx - SI38035
After you have loaded and applied either of these PTFs, type
the following:
CALL QINSTLNG ('29xx')
NOTE: Substitute your target install language for 29xx.
--------------------------------------------------------------
If using the Electronic Software Delivery (ESD) process along
with image catalogs to upgrade to Version 7 Release 1, there
is a new API called QVOIFIMG that will allow you to add all
files within the image catalog directory to the image catalog
automatically. This API has been provided as PTFs in V5R4,
V6R1 and V7R1.
The PTF numbers are:
V5R4Mx - SI40603
V6R1Mx - SI40473
V7R1Mx - SI40971
--------------------------------------------------------------
The following database PTFs are needed to avoid a database
cross reference file error condition during the upgrade to 7.1:
If you are upgrading from V5R4Mx - SI39326
SI47314
SI47447
SI48825
If you are upgrading from V6R1Mx - SI45174
SI47823
SI47825
If these ptfs are not applied to the previous release prior to
the upgrade, a RCLSTG SELECT(*DBXREF) may be required following
the install of the operating system in order to successfully
install several products that are dependent on the data in the
cross reference files.
For V6R1Mx you also need to take the
following actions AFTER you have applied
ptfs (application of database PTFs can
recreate these views):
*
DLTF QSYS2/USER_STG
DLTF SYSIBMADM/USER_STG
*
Failure to do so, will result in having
to run RCLSTG SELECT(*DBXREF) to
repopulate cross reference column level
information following the upgrade to
7.1.
--------------------------------------------------------------
If Upgrading from Version 5, release 4 and 5722DG1 is currently
installed, it is recommended that the HTTP PTF Group level 21
or higher (SF99114) or SI36402 or it's supersede be applied
prior to the system release upgrade. This corrects a problem
where the i5OSjaas.jar files are not consistent between V5R4 and
V7R1.
--------------------------------------------------------------
If upgrading from R540/R545 and the system is an i5 that
is OS Managed for Firmware, prior to upgrading, SF240_332
or later must be either Permanently Applied or Superseded.
If Superseded, the Superseding PTF must be Permanently
Applied.
For information on how to determine what level of
Firmware is currently on the system and how to upgrade it
properly, please refer to the following URL:
http://www-912.ibm.com/s_dir/slkbase.NSF/docNumber/408316083
Problem Summary
Problem Conclusion
Temporary Fix
Comments
Information APAR
Circumvention
PTFs Available
Affected Modules
Affected Publications
Summary Information
Status............................................ | CLOSED CAN |
HIPER........................................... | No |
Component.................................. | |
Failing Module.......................... | |
Reported Release................... | R710 |
Duplicate Of.............................. |
System i Support
IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information
Document Information
Modified date:
19 March 2014