When using the IBM i operating system for V6R1 on POWER6-based systems, it is now possible for an i partition to be installed and operated without physical I/O adapters assigned to the partition. Disk units, optical devices, and Ethernet support can be provided using virtual I/O adapters. A partition using virtual adapters can be referred to as an i Client Partition or i hosted partition.
The hosting operating system can be VIOS or an i partition. It can provide virtual disk units, virtual optical drives, and virtual Ethernet adapters to the i Client Partition. The HMC is used to configure a virtual SCSI server adapter in the hosting partition and a virtual SCSI client adapter in the client partition. (Each adapter is mapped to one client adapter in a one-to-one relationship). The virtual SCSI server adapter and virtual SCSI client adapter become the SCSI transport or connection between the hosting partition and the client partition. Each server/client adapter pair can support up to 16 virtual disk units and up to 16 virtual optical devices.
Once the virtual SCSI server adapter is configured, a container on the host operating system is configured to contain any virtual disk units or virtual optical drives that will be made available to the client partition. In the i operating system, this container is called a network server description (NWSD).
The HMC or IVM may be used to configure Ethernet adapters. This can be a logical host Ethernet adapter (LHEA) or virtual Ethernet. In the case of virtual Ethernet adapters, a hosting partition requires additional configuration to map between the public network the hosting partition is connected to and the private virtual LAN the client partition is connected to.
Documentation for configuring an i partition hosted by another i partition can be found in the Logical Partitioning Guide at the following Web site:
See the section entitled To create an IBM i logical partition that uses IBM i virtual I/O resources using the HMC .
|o||POWER6 Servers with Brand of "I" (models 9406) or "S" (synergy). POWER6 servers with Brand of "P" are not supported. All POWER7 Servers.|
|o||Server firmware: EM320_040_031 or later|
|o||HMC: Version 7.3.2 Service Pack 0 or later|
|o||i Client: V6R1M0|
|o||i Host: V6R1M0|
Message CPDC300 RC2, CPFA0A9, CPD8FFF X'00000063' :
The error occurs attempting to vary on the NWSD. Apply PTF SI30443 or supersede to the hosting LPAR (the one with the NWSD).
Message CPDB1AD rc 0009:
Problem: Power controlling set to YES in NWSD, partition profile set to control power.
Resolution: Choose one or the other as the power control. Consider changing the NWSD to PWRCTL *NO until it is configured.
Message CPDB1AD rc 0002:
Problem: SCSI client any , but no LPAR specified in NWSD.
Resolution: Instead of partition of any , consider configuring the server and client SCSI adapters to specify the server/client LPAR and adapter.
Altering the Network Storage size:
It is not supported to increase or decrease an existing network storage size. Creating additional storage space is recommended to increase the size of disk space on the partition. There are no ALERT messages generated when changing this and it will allow the change to complete, however, the partition will fail to boot.
The reason this change is allowed is because there is no way to determine the operating system within the storage space
and this option is acceptable for Linux and Window operating systems.
You may reference Informational APAR II14509.
Note: If an existing network storage space is altered, a scratch reload of the partition will be required
B2xx8141 on D-mode ipl to virtual optical:
This error indicates that the image is corrupt or not the ibase LIC DVD. Work with Image Catalog Entries. Verify the LIC CD shows mounted (mount, if necessary). Use Option 12=Work with volume on the ibase CD image, Option 5=Display. Scroll down to the MEDIA FORMAT. To IPL, it should be *ISO9660 or *UDF. Option 11=Work with object links should show a file RS610_x (where x is the resave level). If more then one image catalog is mounted or other physical optical devices are active, exclude them by adding the devices to the restricted device resources list in the network server description (NWSD).
System i Support
Rate this page:
Copyright and trademark information
IBM, the IBM logo and ibm.com are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.