IBM Support

Readme and Release notes for release 3.5.1.7 (LL) IBM Tivoli Workload Scheduler LoadLeveler 3.5.1.7 LL_webui-3.5.1.7-noarch Readme

Fix Readme


Abstract

xxx

Content

Readme file for: LL_webui-3.5.1.7-noarch
Product/Component Release: 3.5.1.7
Update Name: LL_webui-3.5.1.7-noarch
Fix ID: LL_webui-3.5.1.7-noarch
Publication Date: 05 August 2010
Last modified date: 05 August 2010

Installation information

Download location

Below is a list of components, platforms, and file names that apply to this Readme file.

Fix Download for Linux

Product/Component Name: Platform: Fix:
(LL) IBM Tivoli Workload Scheduler LoadLeveler Linux 64-bit,pSeries RHEL 4
Linux 64-bit,pSeries RHEL 5
Linux 64-bit,pSeries SLES 9
Linux 64-bit,pSeries SLES 10
Linux 64-bit,pSeries SLES 11
Linux 32-bit,x86 RHEL 4
Linux 32-bit,x86 RHEL 5
Linux 32-bit,x86 SLES 9
Linux 32-bit,x86 SLES 10
Linux 32-bit,x86 SLES 11
Linux 64-bit,x86_64 RHEL 4
Linux 64-bit,x86_64 RHEL 5
Linux 64-bit,x86_64 SLES 9
Linux 64-bit,x86_64 SLES 10
Linux 64-bit,x86_64 SLES 11
LL_webui-3.5.1.7-noarch

Prerequisites and co-requisites

None

Known issues

  • - Known Issues

    [September 10, 2009]

    Do not use the installp -v option when installing the LoadL.webui fileset. A checksum error will occur if this option is specified.

    [May 18, 2009]

    A coexistence issue was introduced in TWS LoadLeveler 3.5.0.5 which also affected TWS LoadLeveler 3.5.1.1. Jobs will not be able to run in a mixed cluster with TWS LoadLeveler 3.5.0.1 - 3.5.0.4 service levels with either TWS LoadLeveler 3.5.0.5 or TWS LoadLeveler 3.5.1.1.

    The coexistence problem introduced in TWS LoadLeveler 3.5.0.5 can not be corrected.

    The entire cluster will need to be migrated to either TWS LoadLeveler 3.5.0.5 or TWS LoadLeveler 3.5.1.1 at the same time.

    There is no coexistence issue between TWS LoadLeveler 3.5.0.5 and TWS LoadLeveler 3.5.1.1.

    [January 19, 2009]

    Do not apply TWS LoadLeveler 3.5.0.2 maintenance level. If the job queue is not empty when upgrading to TWS LoadLeveler 3.5.0.2, the jobs in the job queue will be removed.

Installation information

  • - Installation procedure

    Follow these instructions to install the Web User Interface for LoadLeveler for Linux.

    1. Change to the < UpdateDirectory > directory where you downloaded the *.tar.gz file for the WebUI, and where you have write access:

      cd < UpdateDirectory >
    2. Extract the RPM files from the tar file:

      tar -xzvf LoadL-webui- < update_version > .noarch.3.4.X.tar.gz

      where

      < update_version > is 3.4.X.Y-0

      < X > is the MOD level
      < Y > is the PTF level

      The extracted files should match the tar file contents listed in the "View" file for the download.
    3. Verify that the LoadLeveler 3.4.X.0 "license" RPM is currently installed on this system:

      rpm -qa | grep LoadL

      The output of this command should be similar to the following:

      LoadL-full- < OS-ARCH > - < currently_installed_version >
      LoadL-full-license- < OS-ARCH > - < installed_license_version >
      LoadL-webui- < currently_installed_version >


      where

      >< OS-ARCH > should match the Linux Operating System and platform architecture of the machine you are installing on. For example, if you are upgrading an installation of LoadLeveler on a PowerPC 64 machine running SLES9, then < OS-ARCH > would be SLES9-PPC64.

      and

      < currently_installed_version > is 3.4.X.Y-0

      and

      < installed_license_version > is 3.4.X.0-0

      Note: Do not proceed if the LoadL-full-license- < OS-ARCH > -3.4.X.0-0 license package is not installed. That is, if you are currently running LoadLeveler 3.3.x for Linux you must first upgrade to LoadLeveler 3.4.X.0-0 before you can install the 3.4.X.Y-0 RPM you have just downloaded. Please contact your IBM marketing representative for information on how to obtain the LoadLeveler 3.4.X.0 CD-ROM that has the license package.
    4. If the LoadLeveler Web User Interface is currently running on the machine, stop the web application server.
    5. To apply the update:

      Uninstall the LoadL-webui- < currently_installed_version > package

      where

      < currently_installed_version > is 3.4.X.Y-0

      and then install the LoadL-webui- < update_version > .noarch.rpm package by running the following commands:

      rpm -e LoadL-webui- < currently_installed_version > rpm -ivh LoadL-webui- < update_version > .noarch.rpm
    6. Repeat steps 4 and 5 for all the machines in the LoadLeveler cluster that have the LoadL-webui rpm installed.

    For further information, consult the LoadLeveler Library for the appropriate version of the LoadLeveler AIX 5L and Linux Installation Guide.

Additional information

  • - Package contents

    Update for TWS LoadLeveler Web User Interface Preview

    LoadLeveler WebUI 3.5.1.7-noarch is a corrective fix for LoadLeveler Web User Interface Preview on all supported LoadLeveler platforms, version 3.5.1.X.

    The updates contained in the LL_webui-3.5.1.7-noarch.tar.gz file available for download from this site provides corrective fixes for the LoadLeveler Web User Interface Preview, version 3.5.1.0.

    Update to Version:

    3.5.1.7

    Update from Version:

    3.5.1.0 through 3.5.1.6

    Update (tar file) contents:

    RPM files:

    LoadL-webui-3.5.1.7-0.noarch.rpm

    For further information, consult the README file for the preview.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SGS8DD","label":"Tivoli Workload Scheduler LoadLeveler for AIX"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Document Information

Modified date:
05 August 2010

UID

isg400000217