A fix is available
APAR status
Closed as program error.
Error description
--- Features --- -Add support for EQADBG/EQAMDBG DDs in Debug Tool Utilities "JCL for Batch Debugging: (DTU option 8.1.3). -BROWSE MODE support for C/C++. -A new column, 'Terminal Id', appears in the DTCN Profiles view in the DTCN plug-in. --- End Features --- --- Service --- -When debugging CICS applications using the options ERROR and NOPROMPT, Debug Tool should only capture an ABEND and report that information. It is now gathering information as we process through every module. (PK95533 at 8.1) -ABENDS0C4 at EQA00STO+x'10BA' and EQA0SRP1+x'530C'. (PM01935 at 9.1) -RD/z does not interpret 31-bit address properly. (PM07231 at 9.1) -An Enterprise COBOL main program calls an Enterprise COBOL sub program, and for the sub program, the user sees these Debug Tool messages for the SYSDEBUG file that is available: EQA1964E Source or Listing data is not available, or the CU was not compiled with the correct compile options. EQA1872E An error occurred while opening file: xxxxxx.xxxxx.xxxxx.xxxxx(yyyyyyyy). The file may not exist, or is not accessible. The actual problem was that not enough region was availble for loading and processing the file. Debug Tool should provide a better message describing the actual problem. This fix requires co-req service for the Language Environment runtime for Enterprise COBOL. Install the PTF for APAR PK93563. See the HOLD for details. (PM05771 at 8.1) -CICS: ASRA at EQANCLDE+x'12FA' or EQA00DBI+x'110C'. (PM05999 at 8.1) -New Langx support for duplicate labeled USINGs and a fix for a Langx error that caused problems debugging self-modifying code. If you need these fixes, you must rebuild your EQALANGX file with the new EQALANGX program supplied with this PTF. Refresh of EQALANGX from Fault Analyzer. EQALANGX version 2010-02-11 16:02. (PM08696 at 9.1) -C/C++ Static variables shown incorrectly on ALCS. -ABENDS0C4 in EDCZLU61 at x'3C' due to bad parm passed from module EQA00DSF. (PM07857 at 9.1) -Debug Tool stops at the program entry the first time a program is called, but does not stop when the program is called again. (PM07845 at 8.1) -ABENDS0C1 in VTAM caused by stray hook. (PM08512 at 7.1) -Terminal Interface Manager started task locks up, preventing users from logging on to TIM or debugging with the VTAM% TEST parameter. (PM08641 at 9.1) -Customer has a C++ program which runs in CICS. During debugging with WDD/z the connection between CICS and WDD/z gets lost. Along with the connection interrupt they get an ASRA abend. (PM08657 at 9.1) -Remote debugger: PL/I variables with Danish characters are not handled correctly in watch breakpoints. (PM09297 at 9.1) -Language Environment User Exit: CSV002I REQUESTS FOR MODULE EQADxXXT EXCEED MAXIMUM USE COUNT. This could be issued for these exits for these module names: EQADBCXT EQADBXXT EQADDCXT EQADDXXT EQADICXT EQADIXXT CSV002I REQUESTS FOR MODULE DSNWLIR EXCEED MAXIMUM USE COUNT. This could be issued for the exit: EQADDCXT (PM09457 at 7.1 DTU&AF) -CICS: Debug Tool ABEND ATCV when application does EXTRACT TCT. (PM09737 at 7.1) -Program check occurs in EQA00OHC+x'00000706'. Failing instruction is a Load - 5800 A00C. Exception occurs due to an invalid address in gpr10. (PM09892 at 9.1) -The User Preference File specified in CADP profile is not being read when using RD/z and Debug Tool starts in a sub program (program which does not create a new LINK level/enclave). (PM10243 at 9.1) -An infinite loop may occur when monitoring a based structure when Enterprise PL/I's BIND 'type function' is used within the program to convert the basing pointer to a handle for the structure type. (PM10749 at 10.1) -When monitoring a large variable (i.e. 130,000 Bytes) in CICS, customer receives the following message: "Resources (for example, heap storage) are not available for processing and the command is terminated unsuccessfully." (PM10841 at 9.1) -Unable to debug non-LE program in IMS-DB2 environment. (PM11056 at 8.1) -EQA9999E - Program Check at EQA00DBH+x'000007A8' occurs while debugging CICS/TS application. (PM11108 at 8.1) -Debug Tool hangs waiting for VTAM% association if transmission services profile of "7". (PM11057 at 8.1) -Program check can occur at various offsets in EQA50TMN (such as +x'38EA') when scrolling in the automonitor window. (PM13547 at 10.1) -ABENDS0C4 EQA00OHC+x'30A0' when calling BPXWDYN. (PM11759 at 9.1) -ABENDS0C4 EQA10MVS+X'4C24' when processing return code and reason code from RACROUTE. (PM12528 at 10.1) -Miscellaneous issues when scrolling in the monitor window when SET AUTOMONITOR ON. -Correct return code processing for DTU IMS SPOC support. -Debug Tool incorrectly stops at DFHELII when in CICS. -Debug Tool Utilities - JCL for Batch Debugging - is dropping a JCL EXEC statement after processing many INCLUDE statements. (PM15195 at 10.1) --- End Service --- This PTF includes service previously shipped as PM08594 / UK54741: -ASRA abend when using Debug Tool V10.1 under CICS with the Language Environment STO(EE,EE,EE) option specified.
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: Debug Tool 10.1.0 users who need the * * features or have the problems described * * in the Problem Description. * **************************************************************** * PROBLEM DESCRIPTION: --- Features --- * * * * -Add support for EQADBG/EQAMDBG DDs in * * Debug Tool Utilities "JCL for Batch * * Debugging: (DTU option 8.1.3). * * * * -BROWSE MODE support for C/C++. * * * * -A new column, 'Terminal Id', appears * * in the DTCN Profiles view in the DTCN * * plug-in. * * * * --- End Features --- * * * * --- Service --- * * * * -When debugging CICS applications * * using the options ERROR and NOPROMPT, * * Debug Tool should only capture an * * ABEND and report that information. It * * is now gathering information as we * * process through every module. * * (PK95533 at 8.1) * * * * -ABENDS0C4 at EQA00STO+x'10BA' and * * EQA0SRP1+x'530C'. * * (PM01935 at 9.1) * * * * -RD/z does not interpret 31-bit * * address properly. * * (PM07231 at 9.1) * * * * -An Enterprise COBOL main program * * calls an Enterprise COBOL sub * * program, and for the sub program, the * * user sees these Debug Tool messages * * for the SYSDEBUG file that is * * available: * * * * EQA1964E Source or Listing data is * * not available, or the CU was not * * compiled with the correct compile * * options. * * * * EQA1872E An error occurred while * * opening file: * * xxxxxx.xxxxx.xxxxx.xxxxx(yyyyyyyy). * * The file may not exist, or is not * * accessible. * * * * The actual problem was that not * * enough region was availble for * * loading and processing the file. * * Debug Tool should provide a better * * message describing the actual * * problem. * * * * This fix requires co-req service for * * the Language Environment runtime for * * Enterprise COBOL. Install the PTF * * for APAR PK93563. See the HOLD for * * details. * * (PM05771 at 8.1) * * * * -CICS: ASRA at EQANCLDE+x'12FA' or * * EQA00DBI+x'110C'. * * (PM05999 at 8.1) * * * * -New Langx support for duplicate * * labeled USINGs and a fix for a Langx * * error that caused problems debugging * * self-modifying code. * * * * If you need these fixes, you must * * rebuild your EQALANGX file with the * * new EQALANGX program supplied with * * this PTF. * * * * Refresh of EQALANGX from Fault * * Analyzer. EQALANGX version * * 2010-02-11 16:02. * * (PM08696 at 9.1) * * * * -C/C++ Static variables shown * * incorrectly on ALCS. * * * * -ABENDS0C4 in EDCZLU61 at x'3C' due to * * bad parm passed from module EQA00DSF. * * (PM07857 at 9.1) * * * * -Debug Tool stops at the program entry * * the first time a program is called, * * but does not stop when the program is * * called again. * * (PM07845 at 8.1) * * * * -ABENDS0C1 in VTAM caused by stray * * hook. * * (PM08512 at 7.1) * * * * -Terminal Interface Manager started * * task locks up, preventing users from * * logging on to TIM or debugging with * * the VTAM% TEST parameter. * * (PM08641 at 9.1) * * * * -Customer has a C++ program which runs * * in CICS. During debugging with WDD/z * * the connection between CICS and WDD/z * * gets lost. Along with the connection * * interrupt they get an ASRA abend. * * (PM08657 at 9.1) * * * * -Remote debugger: PL/I variables with * * Danish characters are not handled * * correctly in watch breakpoints. * * (PM09297 at 9.1) * * * * -Language Environment User Exit: * * * * CSV002I REQUESTS FOR MODULE EQADxXXT * * EXCEED MAXIMUM USE COUNT. * * This could be issued for these exits * * for these module names: * * EQADBCXT EQADBXXT * * EQADDCXT EQADDXXT * * EQADICXT EQADIXXT * * * * CSV002I REQUESTS FOR MODULE DSNWLIR * * EXCEED MAXIMUM USE COUNT. * * This could be issued for the exit: * * EQADDCXT * * (PM09457 at 7.1 DTU&AF) * * * * -CICS: Debug Tool ABEND ATCV when * * application does EXTRACT TCT. * * (PM09737 at 7.1) * * * * -Program check occurs in * * EQA00OHC+x'00000706'. Failing * * instruction is a Load - 5800 A00C. * * Exception occurs due to an invalid * * address in gpr10. * * (PM09892 at 9.1) * * * * -The User Preference File specified in * * CADP profile is not being read when * * using RD/z and Debug Tool starts in a * * sub program (program which does not * * create a new LINK level/enclave). * * (PM10243 at 9.1) * * * * -An infinite loop may occur when * * monitoring a based structure when * * Enterprise PL/I's BIND 'type * * function' is used within the program * * to convert the basing pointer to a * * handle for the structure type. * * (PM10749 at 10.1) * * * * -When monitoring a large variable * * (i.e. 130,000 Bytes) in CICS, * * customer receives the following * * message: "Resources (for example, * * heap storage) are not available for * * processing and the command is * * terminated unsuccessfully." * * (PM10841 at 9.1) * * * * -Unable to debug non-LE program in * * IMS-DB2 environment. * * (PM11056 at 8.1) * * * * -EQA9999E - Program Check at * * EQA00DBH+x'000007A8' occurs while * * debugging CICS/TS application. * * (PM11108 at 8.1) * * * * -Debug Tool hangs waiting for VTAM% * * association if transmission services * * profile of "7". * * (PM11057 at 8.1) * * * * -ABENDS0C4 EQA00OHC+x'30A0' when * * calling BPXWDYN. * * (PM11759 at 9.1) * * * * -ABENDS0C4 EQA10MVS+X'4C24' when * * processing return code and reason * * code from RACROUTE. * * (PM12528 at 10.1) * * * * -Miscellaneous issues when scrolling * * in the monitor window when SET * * AUTOMONITOR ON. * * * * -Correct return code processing for * * DTU IMS SPOC support. * * * * -Debug Tool incorrectly stops at * * DFHELII when in CICS. * * * * -Debug Tool Utilities - JCL for Batch * * Debugging - is dropping a JCL EXEC * * statement after processing many * * INCLUDE statements. * * (PM15195 at 10.1) * * * * --- End Service --- * * * * This PTF includes service previously * * shipped as PM08594 / UK54741: * * * * -ASRA abend when using Debug Tool * * V10.1 under CICS with the Language * * Environment STO(EE,EE,EE) option * * specified. * **************************************************************** * RECOMMENDATION: Installations that need these features or * * problem fixes should install this service. * **************************************************************** New features and miscellaneous service.
Problem conclusion
New features and service available.
Temporary fix
Comments
APAR Information
APAR number
PM08268
Reported component name
DEBUG TOOL Z/OS
Reported component ID
5655V5000
Reported release
A10
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2010-02-23
Closed date
2010-05-25
Last modified date
2010-06-03
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UK57258
Modules/Macros
CDEPRCON EQA00A64 EQA00ABE EQA00AEH EQA00AEI EQA00ALO EQA00ANC EQA00ANL EQA00BKP EQA00BLD EQA00BLK EQA00B ***This field was truncated. To obtain the full apar record, please contact your local support center.***
Fix information
Fixed component name
DEBUG TOOL Z/OS
Fixed component ID
5655V5000
Applicable component levels
RA10 PSY UK57258
UP10/05/27 P F005 ¢
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"A10","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSTQWA","label":"IBM Debug for z\/OS"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"A10","Edition":"","Line of Business":{"code":"LOB35","label":"Mainframe SW"}}]
Document Information
Modified date:
15 October 2020