IBM Support

PI62275: HLASM SUPPORT FOR IBM Z14 INSTRUCTIONS

A fix is available

Subscribe

You can track all active APARs for this component.

APAR status

  • Closed as unreproducible in next release.

Error description

  • RTC 118729
    

Local fix

Problem summary

  • ****************************************************************
    * USERS AFFECTED: All users of HLASM for z/OS, z/VM and z/VSE. *
    ****************************************************************
    * PROBLEM DESCRIPTION: HLASM support for new z14 instructions  *
    ****************************************************************
    * RECOMMENDATION:                                              *
    ****************************************************************
    This APAR provides new hardware support for the IBM z14 for
    z/OS, z/VM and z/VSE.  New instructions have been added to the
    UNI and ZS8 OPTABLEs.  For a complete list of the instructions
    affected, please see the following technote:
    http://www.ibm.com/support/docview.wss?uid=swg22001988
    

Problem conclusion

  • KEYWORDS: R3906/K
    

Temporary fix

Comments

  •       The following documentation updates have been made:
    
    
     High Level Assembler for z/OS & z/VM & z/VSE
       General Information
       Version 1 Release 6
       (GC26-4943-07)
    
     --- START OF DOC UPDATES ---
     Appendix A - Assembler options
     The MACHINE option has been extended to have the new
     values:
     ZSERIES-8, ZS-8
     in the same fashion as ZS7.
     The OPTABLE option has been extended to have the new
     value:
     ZS8
     in the same fashion as ZS7.
    
     --- END OF DOC UPDATES ---
    
    
     High Level Assembler for z/OS & z/VM & z/VSE
       Language Reference
       Version 1 Release 7
       (SC26-4940-07)
    
     --- START OF DOC UPDATES ---
     Chapter 5 - Assembler instruction statements
     The OPTABLE syntax diagram on page 89 has been extended to
     include the value ZS8 in a similar manner to that of ZS7.
    
    
     On page 90, a new paragraph detailing the ZS8 value has
     been       added as:
     ZS8
       Same as OPTABLE(ZS7) but with the addition of support
       for the IBM z14 instructions.
       Equivalent to MACHINE(ZSERIES-8)
    
     --- END OF DOC UPDATES ---
    
    
    
    
     High Level Assembler for z/OS & z/VM & z/VSE
       Programmer's Guide
       Version 1 Release 6
       (SC26-4941-07)
    
     --- START OF DOC UPDATES ---
     Chapter 3 - Controlling your assembly with options
     The MACHINE option syntax diagram on page 56 is extended
     to include the values:
     ZSERIES-8, ZS-8
     in the same fashion as ZS7.
     Two new paragraphs have been added in a similar fashion
     as for       ZSERIES-8 and ZS-8 are added as follows on
     page 57:
     ZSERIES-8
       Same as MACHINE(ZSERIES-7) but with the addition of
       support for the IBM z14 instructions.
       Equivalent to OPTABLE(ZS8).
    
     ZS-8
       Synonym for MACHINE(ZSERIES-8).
    
     Table 8 has been extended to include the following new
     values in a similar fashion to ZSERIES-7 and ZS-7:
     Machine Suboption  OPTABLE Suboption  Output in listing
     ZSERIES-8   ZS8                MACHINE(ZSERIES-8,NOLIST)
     ZS-8        ZS8                MACHINE(ZSERIES-8,NOLIST)
    
     The OPTABLE option syntax diagram on page 59 is extended
     to include the value:
     ZS8
    
    
    
     A new paragraph has been added in a similar fashion as for
     ZS7 on page 60:
     ZS8
       Instructs the assembler to load and use the operation
       code table that contains symbolic operation codes for
       the machine instructions specific to z/Architecture
       systems up to the IBM z14.
       Equivalent to MACHINE(ZSERIES-8)
    
     --- END OF DOC UPDATES ---
    
    
    
    
     High Level Assembler for z/OS & z/VM & z/VSE
     Installation and Customization Guide Version 1 Release 6
     SC26-3494-06
    
     --- START OF DOC UPDATES ---
    
     Chapter: Chapter 24. Modifier keywords
     Section: Assembler options Pages 135-139
    
     This section contains a list in alphabetical order.
     Please add:
     MACHINE ZSERIES-7
     MACHINE ZS-7
     MACHINE ZSERIES-8
     MACHINE ZS-8
     OPTABLE ZS7
     OPTABLE ZS8
    
    
     --- END OF DOC UPDATES ---
    

APAR Information

  • APAR number

    PI62275

  • Reported component name

    HLASM MVS, VM &

  • Reported component ID

    569623400

  • Reported release

    160

  • Status

    CLOSED UR1

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    YesSpecatt / New Function / Xsystem

  • Submitted date

    2016-05-11

  • Closed date

    2017-07-17

  • Last modified date

    2017-08-02

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UI48831 UI48832 UI48833

Modules/Macros

  •    ASMACMS  ASMADOP  ASMADOPD ASMADOPT ASMAINFO
    ASMAOPT  ASMASTXP ASMAXTXP ASMA0C   ASMA00   ASMA01   ASMA03
    ASMA05   ASMA06   ASMA1A   ASMA1B   ASMA1F   ASMA1J   ASMA1K
    ASMA1L   ASMA1P   ASMA1R   ASMA1T   ASMA1U   ASMA1V   ASMA1W
    ASMA1Y   ASMA1Z   ASMA13   ASMA15   ASMA16   ASMA2H   ASMA2I
    ASMA20   ASMA21   ASMA25   ASMA26   ASMA5UNI ASMA5X   ASMA9Z
    ASMA90   ASMA92   ASMA93
    

Publications Referenced
GC26494307 SC26494007 SC26494107 SC26349406  

Fix information

  • Fixed component name

    HLASM MVS, VM &

  • Fixed component ID

    569623400

Applicable component levels

  • R160 PSY UI48832

       UP17/07/18 P F707

  • R360 PSY UI48831

       UP17/07/17 P 1707

  • R689 PSY UI48833

       UP17/07/17 I 1000

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.



Document information

More support for: z/OS family

Software version: 160

Operating system(s): z/OS

Reference #: PI62275

Modified date: 02 August 2017


Translate this page: