A fix is available
APAR status
Closed as unreproducible in next release.
Error description
IBM DB2 ANALYTICS ACCELERATOR FOR Z/OS VERSION 4 missing AQT02MIG module for SYSPROC.ACCEL_MIGRATE
Local fix
request the AQT02MIG module via PMR to IDAA
Problem summary
**************************************************************** * USERS AFFECTED: All users of the * * IBM DB2 Analytics Accelerator for z/OS * * Version 4.1 * **************************************************************** * PROBLEM DESCRIPTION: This PTF contains stored procedure * * and accelerator server updates that are * * part of IBM DB2 Analytics Accelerator * * for z/OS version 4 refresh 2a. * * * * This PTF contains: * * Server version: 4.1.2 * * (build: 20140414-1822) * * Stored procedure build: 4.1.2 * * (build: 20140313-1711) * * * * IDAAV4R1/K * **************************************************************** * RECOMMENDATION: Before installing this PTF, * * make sure that all prerequisites are * * installed on your target system. * * For information, see: * * http://www.ibm.com/support/ * * docview.wss?uid=swg27039487 * * * * This PTF contains: * * Server version: 4.1.2 * * (build: 20140414-1822) * * Stored procedure build: 4.1.2 * * (build: 20140313-1711) * * * * If you have not yet configured * * IBM DB2 Analytics Accelerator for z/OS * * Version 4.1, read the following manuals * * that are all available on * * http://www.ibm.com/support/ * * docview.wss?uid=swg27040146 * * - The "Getting Started" manual * * - and the Installation Guide * * - and the Release Notes * * * * ATTENTION: * * Prerequisite for activating this PTF: * * 1. The base package (RELFILES) for FMID * * HAQT410 must have been applied. Do not * * transfer or apply any software from * * these RELFILES to any accelerator. * * 2. FMID HCHCA21 must have been applied. * * 3. The IBM DB2 Analytics Accelerator Studio * * version 4.1.0.2 was installed. * * 4. a. Netezza Firmware (FDT) version: * * For Netezza models 100/1000/C1000/ * * N1001, a minimum of FDT version 2.3.1. * * For model N2001, and later * * a minimum of FDT version 3.0. * * b. Netezza Host Platform (HPF) version: * * a minimum of HPF version v5.3.1. * * 5. Netezza Performance Server (NPS) version * * higher or equal to 6.0.8.P2 * * 6. DB2 PTFs and Infosphere Change Data * * Capture Agent PTFs or ++APARs must be * * installed for the APARs listed on * * following prerequisites site: * * http://www-01.ibm.com/support/ * * docview.wss?uid=swg27039487 * * * * Activating the PTF is a multi-step process: * * * * 1. Transfer and activate Incremental Update * * parts (provided with prerequisite PTFs) * * in the following order (unless these or * * later versions are already installed): * * For instructions, see the * * Installation Guide, Chapter 11: * * "Installing Updates" * * 1.Access Server update version * * 10.2.1.2221 (build date 20140414-1822) * * 2.Replication Engine base * * version 10.2.1 (Build CCTRJYPP_20_4) * * (build date 20140414-1822) * * 3.Replication Engine update * * version 10.2.1 (Build CCTRJYPP_20_36) * * (build date 20140414-1822) * * * * 2. Transfer and activate the software on * * the IDAA system with the update included * * in this PTF (unless this or a later * * version is already installed). * * For instructions, see the * * Installation Guide, Chapter 11: * * "Installing Updates" * * * * 3. Activate the stored procedures included * * in this PTF by following * * the steps in the * * Installation Guide, Chapter 6: * * "Setting up IBM DB2 Analytics * * Accelerator for z/OS". * * Having completed the activation, * * verify the configuration by following the * * steps in the Installation Guide under * * "Verifying the installation of * * IBM DB2 Analytics Accelerator for z/OS * * stored procedures". * * * * 4. Transfer and activate NPS (provided with * * prerequisite PTFs) if the NPS version is * * lower than NPS 7.0.4.3 P2 (build 35925) * * (build date 20140331-1528). * * The process to determine the Netezza FDT * * and HPF versions is described in the * * Release Notes on * * http://www.ibm.com/support/ * * docview.wss?uid=swg27040146 * * * * If the Netezza FDT and HPF version * * prerequisites listed above are not met, * * plan for an outage to upgrade. * * For details, see: * * http://www-01.ibm.com/support/ * * docview.wss?uid=swg21626217 * * * **************************************************************** This PTF enables IBM DB2 Analytics Accelerator for z/OS version 4.1 and contains fixes for the issues described below. A detailed description for the fix can be found in the following support document: http://www.ibm.com/support/docview.wss?uid=swg27042073 ============================================================ The new ACCEL_MIGRATE stored procedure is not contained in PTF UI17115. ============================================================ ************************************************************ * USERS AFFECTED: All IBM DB2 Analytics Accelerator for * * z/OS Version 4.1.0 Refresh 2 users * ************************************************************ * PROBLEM DESCRIPTION: The ACCEL_MIGRATE stored procedure * * is not contained in PTF UI17115 * ************************************************************ Problem Summary: A critical stored procedure is missing from V4.1 PTF-2. Problem conclusion: The problem has been fixed. The stored procedure is contained in this PTF.
Problem conclusion
Temporary fix
********* * HIPER * *********
Comments
--
APAR Information
APAR number
PI17099
Reported component name
SMRT ANL OPT DB
Reported component ID
5697AQT00
Reported release
410
Status
CLOSED UR1
PE
NoPE
HIPER
YesHIPER
Special Attention
NoSpecatt
Submitted date
2014-05-02
Closed date
2014-05-20
Last modified date
2014-06-03
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UI18141
Modules/Macros
AQTDBACC AQTDBACT AQTDBCAT AQTDBCON AQTDBC10 AQTDBDYN AQTDBQIT AQTDBTRC AQTDBUNL AQTDBZPR AQTENV AQTNOTE AQTOSR AQTPKAP1 AQTPKAP2 AQTPKCFG AQTSCALL AQTSCI01 AQTSCI02 AQTSJI00 AQTSJI01 AQTSJI02 AQTSJI03 AQTSJI04 AQTSSCHK AQTSSCPY AQTSXADD AQTSXALT AQTSXCN0 AQTSXCN1 AQTSXCN2 AQTSXCN3 AQTSXCN4 AQTSXIM0 AQTSXQHI AQTSXSD1 AQTSXTCO AQTSXTSL AQTSXTSU AQTSXTS0 AQTTIJSP AQT02AAC AQT02ALT AQT02ART AQT02ATB AQT02CAC AQT02CDC AQT02ENQ AQT02FGV AQT02FRF AQT02GQD AQT02GQR AQT02GTC AQT02GTI AQT02LTB AQT02MIG AQT02PSD AQT02RAC AQT02RAT AQT02RTB AQT02STA AQT02TCO AQT02UCR AQT02USW
Fix information
Fixed component name
SMRT ANL OPT DB
Fixed component ID
5697AQT00
Applicable component levels
R410 PSY UI18141
UP14/05/22 P F405
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"410","Edition":"","Line of Business":{"code":"","label":""}}]
Document Information
Modified date:
03 June 2014