OA42657: DEVELOPMENT FIXES

A fix is available

Subscribe

You can track all active APARs for this component.

APAR status

  • Closed as program error.

Error description

  • Development Fixes
    

Local fix

Problem summary

  • ****************************************************************
    * USERS AFFECTED:                                              *
    * V2R1 Users                                                   *
    * E2827/K                                                      *
    ****************************************************************
    * PROBLEM DESCRIPTION:                                         *
    * R130614O InOpDump by ISTSRIWI: ISTSRIWI InOpCode 100,PCIE    *
    * EVENT CODE = 7 (16152)                                       *
    * ZZ020747 - Switch PFID portnum does not work                 *
    * (16258)                                                      *
    * PLAC storage leak (15962)                                    *
    ****************************************************************
    * RECOMMENDATION:                                              *
    * Apply Fix                                                    *
    ****************************************************************
    (16152) Diagnostic dump of the adapter is not always taken when
    INOPDUMP is enabled.
    (16258) EZZ4336I ERROR DURING ACTIVATION OF INTERFACE
    EZARIUT10001 - CODE
                      80103016 DIAGNOSTIC CODE 02
    
                      EZD2028I INTERFACE EZARIUT10001 ACTIVATION
    FAILED - INCORRECT PORTNAME
                      OR TRLENAME IS SPECIFIED
    (15962) CSM 4KECSA storage growth in CSM component ID x'23'.
    

Problem conclusion

  • (16152) When the device driver receives errors while
    communicating with the hardware, it may issue a force close
    which abruptly deallocates the PFID.  If INOPDUMP was enabled, a
    diagnostic dump of the device driver should also be generated in
    addition to the INOPDUMP  itself.   This is not occuring when a
    force close occurs within the device driver.
    (16258)  An adapter has two ports, port 1 and port 2.  The
    device driver has a restiction that you can activate only one of
    these ports at a time.  However, the device driver is  invalidly
    rejecting an activation if you previously had the other port for
    the same PFID active previously.  The error is occuring because
    the dyanamic TRLE for the port is still defined.
    (15962) VTAM was obtaining CSM storage during Read Completion
    processing, but could not obtain the necessary lock to process
    the interrupt and was not saving the CSM storage on the correct
    availability queue, causing the storage to be lost.
    

Temporary fix

Comments

APAR Information

  • APAR number

    OA42657

  • Reported component name

    VTAM V4 MVS/ESA

  • Reported component ID

    569511701

  • Reported release

    210

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2013-06-24

  • Closed date

    2013-07-03

  • Last modified date

    2013-08-19

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UA69773

Modules/Macros

  • ISTSRIUF ISTSRRCL ISTSRIRU ISTTSCIC ISTSRIS8 IUTLLCRM ISTSRRUT
    ISTSRIWC ISTSRIWT ISTSRIDQ
    

Fix information

  • Fixed component name

    VTAM V4 MVS/ESA

  • Fixed component ID

    569511701

Applicable component levels

  • R210 PSY UA69773

       UP13/07/19 P F307

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.



Rate this page:

(0 users)Average rating

Document information


More support for:

z/OS family

Software version:

210

Operating system(s):

z/OS

Reference #:

OA42657

Modified date:

2013-08-19

Translate my page

Machine Translation

Content navigation