A fix is available
APAR status
Closed as program error.
Error description
Application data accumulating on TCP send / receive queues results in the request for more than 1 CSM dataspace.
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: All * **************************************************************** * PROBLEM DESCRIPTION: CSM created an additional 64-bit backed * * fixed storage data space and it did * * not issue any message to inform the * * user. * **************************************************************** * RECOMMENDATION: * **************************************************************** This problem may be described as follows: 1. TCP/IP applications were using very high amount of CSM 64-bit backed fixed data space storage. TCP/IP used CSM 64-bit backed fixed two Giga bytes data space. It requested more CSM buffers of 64-bit backed fixed storage. 2. IVTSMCDS received control to create another CSM 64-bit backed fixed storage data space. It created CSM 64-bit backed fixed storage data space and it did not issue any message to inform the user.
Problem conclusion
IVTSMCDS have been changed to issue the message IVT5593I if the data space number is third or higher. IVT5550, ISTCFCML, ISTCFCMM, ISTINCNO and ISTVTMEU have been changed to define new message IVT5593I. ---------------------------------------------------------- The request for the publication change has been submitted as follows: Title: z/OS Communications Server SNA Messages Release: z/OS V1R11 and higher. Document Number: SC31-8790 In the Chapter 16 - IVT messages for VTAM network operators Add a new message IVT5593I after IVT5592I as follows: IVT5593I CSM CREATED AN ADDITIONAL DATA SPACE dspname Explanation: CSM creates a CSM64001 data space for 64-bit backed fixed data-space storage and a CSM31002 data-space for 31-bit backed fixed data-space storage. There is not enough storage available in the existing data space, CSM creates another data space, dspname, and issues this message. dspname is the name of the recently created data space. Example: IVT5593I CSM CREATED AN ADDITIONAL DATA SPACE CSM64003 System Action: Processing continues. Operator Response: Issue the DISPLAY CSM command without the OWNERID operand to determine current storage limits and usage. Issue a DISPLAY CSM command with OWNERID=ALL to determine how much storage is in use by each application. If TCP/IP is available, issue the D TCPIP,,STOR command to determine its storage usage. Save the system log and request a dump of VTAM and TCP/IP address spaces and CSM data spaces for problem determination. Contact the system programmer. Note: CSM data spaces are associated with the address space 1 (Master Scheduler). See z/OS Communications Server: SNA Operation for more information on the DISPLAY CSM command. See z/OS Communications Server: IP System Administrator's Commands for more information on the DISPLAY TCPIP,,STOR command. User Response: Not applicable. System Programmer Response: Look at the Display CSM command output and determine the application using excessive data space storage including 64-bit or 31-bit backed fixed data space storage. See the information APARs II12657 and II12658 for VTAM and TCP/IP maintenance for CSM storage problems. If external trace is active, see "Analyzing storage" in z/OS Communications Server SNA Diagnosis Vol 1, Techniques and Procedures for information about analyzing storage using the VIT analysis tool. Refer to information on "Internal and external trace recording" in z/OS Communications Server: SNA Diagnosis Vol 2, FFST Dumps and the VIT for additional information. If TCP/IP indicates excessive CSM data space storage usage, then see "Steps for reviewing a storage problem" in z/OS Communications Server: IP Diagnosis Guide for additional information. Problem Determination: Not applicable. Source: z/OS Communications Server CSM Module: Not applicable. Routing code: 2 Descriptor code: 6 Automation: Automation could be written to complete the following operations when message IVT5593I is detected: 1. Issue the DISPLAY CSM command without the OWNERID operand 2. Issue the DISPLAY CSM command with OWNERID=ALL 3. Issue the D TCPIP,,STOR command 4. Request a dump
Temporary fix
Comments
APAR Information
APAR number
OA38511
Reported component name
VTAM V4 MVS/ESA
Reported component ID
569511701
Reported release
1C0
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2012-01-13
Closed date
2012-02-17
Last modified date
2012-05-02
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UA64250 UA64251 UA64252
Modules/Macros
ISTCFCML ISTCFCMM ISTINCNO ISTVTMEU IVTSMCDS IVT5550
SC31879011 | SC31879010 | SC31879009 |
Fix information
Fixed component name
VTAM V4 MVS/ESA
Fixed component ID
569511701
Applicable component levels
R1B0 PSY UA64250
UP12/04/21 P F204
R1C0 PSY UA64251
UP12/04/21 P F204
R1D0 PSY UA64252
UP12/04/21 P F204
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"1C0","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SSCY4DZ","label":"DO NOT USE"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"1C0","Edition":"","Line of Business":{"code":"","label":""}}]
Document Information
Modified date:
02 May 2012