A fix is available
APAR status
Closed as new function.
Error description
Compatibility Toleration Coexistence with HJE7780 JES2 z/OS1.13. Additional Symptoms: MSGHASP710 MSG$HASP710 $HASP710 This APAR also addresses an issue for the max job # JNTLCMAX, being moved to CCTJLMAX during warm start processing and JES2 may determine the incorrect job number prefix to use (JOBxxx versus Jxxxxx).
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: All users of HJE7750, HJE7760, and HJE7770 * * who plan to run an HJE7780 version of JES2 * * in the same MAS. * **************************************************************** * PROBLEM DESCRIPTION: Releases HJE7750, HJE7760, and HJE7770 * * are changed to recognize JES2 release * * HJE7780 as a valid member to co-exist * * with in a multi-access spool (MAS) * * environment. * **************************************************************** * RECOMMENDATION: * **************************************************************** $HASPEQU is updated to specify HJE7780 as the highest valid release that can coexist in a JES2 MAS. If this APAR is not applied, MSGHASP710 will be issued when attempting to initialize an HJE7780 member in a MAS with an HJE7750, HJE7760, or HJE7770 member (or vice versa). In addition, the JES2 service level, J2SLVL, has been increased. Releases of JES2 prior to HJE7750 cannot coexist in a MAS with HJE7780.
Problem conclusion
KEYWORDS: ZOS0201C/K ZOS0202C/K
Temporary fix
*** * TEMPORARY FIX MAY BE OBTAINED FROM DLL OR INFO/ACCESS **** ******************* OA31806 DECK AVAILABLE ********************
Comments
TYPE/RESTART(WARM) IPL/REQUIRED(YES) CLPA(YES) CLPA is needed only if HASCxxxx modules currently reside in the pageable link pack area (PLPA). $HASPEQU is updated to specify HJE7780 as the highest level of JES2 that can exist in a MAS. The JES2 service level is updated to indicate a new service level exists. If you do not have this APAR on all members of the MAS or have any MAS members at a level prior to HJE7750 you may experience various problems under the following circumstances: - a member of the MAS is updated to HJE7780. - the HJE7780 member processes work, updating the checkpoint, expands the checkpoint limits, or stores output to spool. - the HJE7780 member is changed back to a prior release. In the above circumstances you may experience: - a WARM start of a non-HJE7780 member will not detect checkpoint limits that are beyond what the member can support. Starting in z/OS V1R13, JES2 provides the ability to specify a generic SPOOL volume prefix on the $T SPOOLDEF VOLUME parameter. Once this capability is enabled, pre-z/OS V1R13 members will not be allowed to enter the MAS. "$HASP720 WARM START DENIED - SPOOLDEF VOLUME=prefix contains generic characters. This release does not support generics in the SPOOL volume prefix." is issued if a pre- z/OS V1R13 member attempts to join the MAS and the WARM start of that member will be terminated. A z/OS V1R13 member existing in a mixed MAS will reject a $TSPOOLDEF command that tries to utilize a generic SPOOL volume prefix. Starting in z/OS V1R13, JES2 has the ability to migrate a SPOOL volume data set to a different spool volume using the new migrate SPOOL volume command $M SPL. While a migrate SPOOL command is active or pending, or the SPOOL volume has a status of MAPPED, pre-z/OS V1R13 members will not be allowed to enter the MAS. "$HASP720 WARM START DENIED - SPOOL volume volser is in a migrating state. This release does not support migrating SPOOL volumes." is issued if a pre-z/OS V1R13 member attempts to join the MAS and the WARM start of that member will be terminated. A z/OS V1R13 member existing in a mixed MAS will reject a migrate SPOOL command. Starting in z/OS V1R13, JES2 has the ability to extend the size of a SPOOL volume data set, to take advantage of contiguous free space on the volume. The extend can be requested using the modify SPOOL volume command $T SPL, using the SPACE= parameter. While an extend SPOOL command is active or pending, pre-z/OS V1R13 members will not be allowed to enter the MAS. "$HASP720 WARM START DENIED - SPOOL volume volser data set is being extended. This release does not support extending SPOOL volume data sets." is issued if a pre-z/OS V1R13 member attempts to join the MAS and the WARM start of that member will be terminated. A z/OS V1R13 member existing in a mixed MAS will reject an extend SPOOL command. The first $HASP720 condition encountered will cause the message to display and WARM start to fail. Other $HASP720 conditions may also exist. Note that it is possible that the $HASP720 message may be preceded by a $HASP896 DAS VERIFICATION AND REBUILD HAS COMPLETED message. This is normal in this situation and does not indicate an error in the DAS. Starting in z/OS V1R13, JES2 provides improvements in the management of the job completion code. This information is tracked in the existing maximum completion code field in the JQE. The code for down level releases has been updated to not report these new settings on the SSI 80 Extended Status calls or ENF 70s and instead report no completion information. The information in the following JES2 manuals/publications is missing/incorrect: 1.z/OS V1R10.0 JES2 Messages SA22-7537-08 2.z/OS V1R11.0 JES2 Messages SA22-7537-09 3.z/OS V1R12.0 JES2 Messages SA22-7537-10 The text for Chapter 11.0 Seven-hundreds for message $HASP720 should include: WARM START DENIED - SPOOLDEF VOLUME=prefix contains generic characters. This release does not support generics in the SPOOL volume prefix. Explanation: JES2 members prior to JES2 z/OS V1R13 are not allowed to join the MAS because they do not support generics in the SPOOL volume prefix. A z/OS V1R13 member existing in a mixed MAS will reject a $TSPOOLDEF command that tries to utilize a generic SPOOL volume prefix. WARM START DENIED - SPOOL volume volser is in a migrating state. This release does not support migrating SPOOL volumes. Explanation: JES2 members prior to JES2 z/OS V1R13 are not allowed to join the MAS if a migrate SPOOL command $MSPL is active or pending, or the SPOOL volume is MAPPED. A z/OS V1R13 member existing in a mixed MAS will reject a migrate SPOOL command. WARM START DENIED - SPOOL volume volser data set is being extended. This release does not support extending SPOOL volume data sets. Explanation: JES2 members prior to JES2 z/OS V1R13 are not allowed to join the MAS if an extend SPOOL command $TSPL,SPACE= is active or pending. A z/OS V1R13 member existing in a mixed MAS will reject an extend SPOOL command. The first $HASP720 condition encountered will cause the message to display and WARM start to fail. Other $HASP720 conditions may also exist. Note that it is possible that the $HASP720 message may be preceded by a $HASP896 DAS VERIFICATION AND REBUILD HAS COMPLETED message. This is normal in this situation and does not indicate an error in the DAS. The following information applies to all conditions that lead to a $HASP720 message: System Action: The WARM start is terminated Operator Response: None System Programmer Response: None Detecting Module: HASPIRDA Routing Code: 1,2,10 Descriptor Code: 4 The information in the following JES2 manuals/publications is missing/incorrect: 1.z/OS V1R11.0 JES2 Messages SA22-7537-09 2.z/OS V1R12.0 JES2 Messages SA22-7537-10 The text for Chapter 8.0 Four-hundreds for message $HASP445 should include the following reason message texts: A SPOOL IS USING NON-DEFAULT DATA SET NAME Either JES2 was warm started with PARM=UNACT or an $ACTIVATE,LEVEL=Z2 command was issued, and JES2 detected at least one SPOOL volume with a non-default data set name. Since Z2 mode does not support non-default data set names, the SPOOL data set would need to be removed and created with the default SPOOL data set as specified on SPOOLDEF DSNAME= before switching to Z2 mode. The effect is that JES2 remains in z/OS Z11 mode. Updates will only be made to the 'JES2 Messages' manual in future JES2 releases. Searchable keyword R13COEXS/K APAR OA31806 prereq's (and sup's) for FMID HJE7750: Pre's: DA28532 DA32216 DA34293 DA30735 DA32292 DA34563 APAR OA31806 prereq's (and sup's) for FMID HJE7760: Pre's: EA28532 EA32216 EA32712 EA31703 EA34293 EA32431 EA30735 EA31837 EA32761 EA33377 EA32292 EA32799 EA33716 EA34563 EA34987 EA33164 APAR OA31806 prereq's (and sup's) for FMID HJE7770: Pre's: FA32216 FA32712 FA34293 FA32431 FA33377 FA33716 FA33832 FA34164 FA34563 FA34987 FA33164
APAR Information
APAR number
OA31806
Reported component name
JES2
Reported component ID
5752SC1BH
Reported release
760
Status
CLOSED UR1
PE
NoPE
HIPER
NoHIPER
Special Attention
YesSpecatt / New Function / Installability /
Xsystem
Submitted date
2010-01-28
Closed date
2011-03-10
Last modified date
2015-01-20
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UA59433 UA59434 UA59435
Modules/Macros
$CIRWORK $DAS $HASPEQU $HASPGBL $JQE $MODULE HASCSIRQ HASCSISC HASCSRJB HASMDAS HASMPCE1 HASMTABL HASPFSSM HASPIRDA HASPJQS HASPMSG HASPNUC HASPSERV HASPSTAB
SA22753708 | SA22753709 | SA22753710 |
Fix information
Fixed component name
JES2
Fixed component ID
5752SC1BH
Applicable component levels
R750 PSY UA59433
UP11/03/23 P F103
R760 PSY UA59434
UP11/03/23 P F103
R770 PSY UA59435
UP11/03/23 P F103
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"760","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":null,"label":null},"Product":{"code":"SG19O","label":"APARs - MVS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"760","Edition":"","Line of Business":{"code":"","label":""}}]
Document Information
Modified date:
20 January 2015