II14105: OEM BUGS IN VSAM, CAT. & IDCAMS CAUSED BY OEM PROGRAMS OR OTHER IBM PRODUCTS. SEE II10001/11013/11513/12140/12615/13278/33690

APAR status

• INTRAN

Error description

• This APAR continues II10001, II11013, II11513, II12140, II12615,
  II13278, II13603, II13775,
  in documenting symptoms/bugs related to VSAM, Catalog,
  IDCAMS & RLS caused by various OEM vendor products or other
  IBM products.
  KEYWORDS: VSAMBUGS INFOAPAR and INFOAPAR5
  ----------------------------------------------------------------
  321 - ABEND0C4 in ICYDIE (UA08364) +0232.  The MMRE has been
        freed.  The MMIB's user termination routine points to
        CA's PTA@MMTX.  CA problem opened, see CA Customer
        Support Request 13907187 01.  Oct 20 '05 - sydney
  322 - Abend80A or abend878 using CA product CA-11
        IGC0002F owned storage is left stranded below
        the line due to application errors in SVC26 handling
        CA has taken apar TB91321 and provided a fix to the
        customer. There is no work around known to IBM.
        Dec 20 '05 - Michael Scott
  323 - ABEND0C4 reported in IDA0557A, however
        the PSW shows BMC X37 code.  BMC has
        provided BPG4203.  Problem found on
        z/OS 1.7.    Mar '06- DR
  324 - ABEND0C4 reported in IA0557F.  The
        PSW points to code with eye catcher
        of V37VSAM.  CA provided fix T25A64
        on z/OS 1.7 for CA-Vantage V11R5.
        Mar '06 - DR
  325 - ABEND0C4 reported in IDA0557F. The abend
        is actually taking place in code with
        eye catcher of X37 BMC.  BMC has provided fix
        BPG4202 for Mainview/SRM on z/OS 1.7. Mar'06 DR
        note: BPG4202 is for BMC M/SRM level 7.2
        BPG4203  is for BMC Mainview/SRM level 7.3
  326 - ABEND 0C4 reported in ICYDIE. The abend actually happened
        in BMC module with BMC eyecatcher. BMC has provided fix
        record number 528689 for z/os 1.7
  327 - ABEND 0C4 RC 11 reported in IDA0192A. The abend was
        caused by Computer Associates executing a freemain on
        storage that VSAM was trying to reference. VSAM tried to
        reference the VAT address from a TCB. Computer Associates
        has provided fix QO80870 for z/OS 1.7.
  328 - RPL feedback code indicates the broken cluster and
        reallocating/repopulate (or start with an empty cluster)
        would resolve the problem, and the PTF is recommended by
        Compuware could installed to avoid any future corruption
        problems. RPL feedback code of x'000800F8'. Compuware
        PTF X180441
  329 - VSI chain overlay by OEM, TMON product.Contact ASG and
        refer to 'ASG Incident: 717609 - S0D5 abends in TMDB630'
        THis is for  TMON for DB2 Version 041 mod level 000.
        NO FIx number has been given.
  

Local fix

• 327 - abend138 in MHIMIMEQ.  Original svc 56 (0a38) issued from
        IDA0192A (r1K0 base) +x'1304' - reissued by MHIMIMEQ (from
        CA).  2 ENQs in PLIST, 1st for data component .B and the
        2nd for cluster .S - the .S already exists in GRS data
        and thus the problem.  Problem occurs when a number of
        batch jobs are submitted concurrently that access DB2
        archive and archive logs.
        This is a CA DB2 tools product problem - tag is PLR 44
        (pmr# 27672,7TD - 18 April 2006 - by sydney)
  328 - IDC3351I ** VSAM I/O RETURN CODE IS 44
        - RPLFDBWD = X'2308002C' was caused by the
        MAXLRECL being defined at 4089 with a CI size
        of 4096.  For Compressed data sets the MAXLRECL
        must be at least 10 less than the CI size. In
        this case an OEM issue allowed the data set to
        be created this way.  The fix from DMS is QO60883.
        (pmr 03026,278 April 2006 Dave)
  329-  Wait in IDA019RP for ENDREQ to complete in
        CA-Compress addr space doing I/O to it's
        control file. ENQ/RESERVE on SYSZSAM/VSAMFILE.
        Modules involved are ZSURPC, ZSURGDSN.
        Fix is CA # Q076437.
        (PMR 47618,6X6,760  and 48043,6X6,760)
  330 - Abend0c4 pic10 in what appears to be IDA0557F but
        actually points into a BMC module. ' BMC SRMSVOS
        PRSVS431 ' eyecatcher found in storage prior to abend
        location.
        Fix for BMC Mainview SRM StopX37/II version
        (7.3.03) is BPG4089. APAR is BAG2672.
        Problem resolution: BPG4089 Prevents Multiple Spacevolas
        on DB2 Datasets, which also use DB2 Stogroups and no
        space available for the extent. The problem and fix are
        not z/OS version dependent.
  331 - abend0c4 ICYDIE attempting to branchto BMC
        DIE routine ACEMMIF. This routine was not
        page fixed in storage prior to the Media Manager
        request.  Products involved are BMC RECOVER PLUS
        and BMC COPY PLUS. - RESOLUTION ID IS 528689.
        (IBM PMR 74741,7TD)
  332 - Reorganizing large KSDS has become a performance
        issue.  Something in CA's Vantage and Allocate products
        has changed and when products backed up to previous
        maintenance levels everything OK.  CA does not yet have
        a solution.  pmr# 17298,500 - 29 June 2006.
  333 - ABEND0c4 pic11 / rsn00301314 in ICYDIE (r1K0 base) at
        x'04F6' - due to early FREEMAIN of a Media Mgr control
        block.  When CA's Fast Unload job (UTLFUULT) cancelled
        storage for a subtask is freed and thus the problem.
        CA PTF UCME098 fixes problem.  pmr# 69807,082,649
        (10 July 2006)
  334 - Several symptoms - From IMS abend0c4 pic10 in IDA0192A
        (ua23211) at x'373a' in procedure VSICLNUP.
        From VSAM - system hung on ENQ of SYSVSAM/VSICHAIN.  Also,
        abend0c4 pic10 in IDA0192B (r1J0 base) at offset x'13AE'
        accessing the VSI chain, and the VSI chain is broken.
        In each case examining the VSI chain shows an overlay with
        reference to something called NEON.  NEON provided an
        upgraded release of their software and this corrected
        problem.  pmr# 75065,499 and 75070,499 - 3 Aug 2006.
  335 - Receive IGD306i rc24 and IEC070I 211(8,306)-221
        and DB2 message DSNT408I SQLCODE = -904 -
        TIOT full and no dummy '*' entry where another volume
        may be added.  Someone probably did an ALTER ADDVOL to
        data set (DB2 index) but it was not closed and re-opened
        on system where messages received.  CA APAR T25D04F
        corrects problem.  pmr# 23017,370 - 16 Aug 2006.
  336-  Job cancel results in abend378-14 ( abend378 rc14 )
        CA module is issueing a SVC 78 freemain ( svc78 ).
        values in reg 0 and reg 1 at time of svc78 are bad.
        CA fix # Q079929 PMR # 58596,370 - 11/30/06.
  337 - SYSPLEX wide GRS Enqueue System Hang - ENQ has major
        name of ACFVSAM.  Dump showed PLH deferred on FREOVF
        doing a VERIFY REFRESH.  Client has CICS APAR PQ88234
        applied and CAs APAR QO75845 applied.
        Client implemented CA MIM change of NO-SMC and all is
        OK.  See 40524,379 - Jan 2 007.
  338 - IOS000I CMD,A6,0E00 / Media Manager ICYTRACE record cut
        for command reject when using CA-VTape with VSAM LDS
        dataset.  Command reject taken when trying to verify
        correctness of cache contents before the dataset is
        entirely created.  This is related to VTape problem P1773.
        The circumvention is to ensure enough static cache is in
        place for recalls of old virtual volumes.  Contact CA for
        further information.
  339 - ABEND0C4 pic10 in IDA0192A (IDA0557F or IDA0557A).  PSW
        points to BMC eyecatcher several lines below PSW address
        and BMC eyecatcher several lines above PSW address.
        Client applied BMC MAINVIEW v7.3.04 PTF BPG4203 and the
        abends were resolved.  See pmr# 29234,499 - Feb 2007.
  340 - IEC070i 034-204, 203-204, rc ###, rsn 204 generated in
        VSAM EOV by SEA product TRMS.  The return code will vary
        depending on the attributes of the dataset.  The reason
        will always be 204.  This message has been confirmed by
        SEA development as expected, and working as designed.
  341 - ABEND0C4 appears externally in IDA019L1 + x'02CDE8'
        (IDA019SE + X'700').  The 0C4 appears to be taken on a LR
        instruction (regs 5 and 9).  The 0C4 is actually taken in
        BMC module COSSR210.  This is in the SVOS which is a
        component of the Mainview/SRM (formerly PROSMS or
        STOPX37/II) Allocation product.  BMC gave fix BPG4805 as
        the solution.
  342 - ABEND0C4 reported in IGG0CLXE at x'6A'.
        The issuing module of the SVC26 is FDRTCOPY and
        the problem is a miscoded SVC26 parameter list.
        The circumvention fix is P-54.5589 for FDR 5.4/55-56
        It returns the code to issuing a CAMLIST rather than
        an SVC26 while they work on fixing the problem.
  343 - ABEND0C4 in IDA019R1 +1570  or IDA019RZ + 6EE.
        PLH or other blocks in SP0, KEY8 are gone due to
        tcb being attached with SZERO=NO.
        New BMC Mainview/SRM apar BAG3220 will address this
        problem. See PMR 39122,004   July 2007   CH.
  344 - ABEND0C4 in IDA0192A (loadmod) +1BB2 IDA0192A (csect at
        UA32590) +91A.  Initial 0c4 due to PLH dynamically added
        (dynamic string addition) with SZERO = NO specified on the
        ATTACH macro. Attaching TCB frees PLH, but VSAM still
        attempts to reference. Originator of ATTACH is BMC module
        COSSR300.  A series of abend 016D has been seen after the
        initial 0c4. BMC has given fix BAG3212 (BP05053).  See PMR
        05085,500 Sept 2007 DBL.
  345 - Migration from z/OS 1.4 to 1.7 client receives
        ABEND0C4 at of IDA0557A.  When reviewing the
        dump the PSW is actually in PRS41410 BMC code.
        BMC PTFs BPG2774, BPG4133, and BPG4320 resolved
        issue.
  
  346 - IEC338I - IGG0CLHB, VALIDITY CHECK FAILED ON CATALOG
                  PARAMETER LIST
        IEC331I 128-002,N801CATD,STEP3   ,VCXT,IGG0CLXA
        Caused by an error in Innovation's SVC26.  Resolved by
        Innovation Zap: ZAP P-54.5602
  347 - Hang due to resource contention on resource
        NAME=MAJOR=STROBEHA.  A PLH was holding
        position for the caller.  The fix is Strobe
        PTF X183748.
  348 - IEC161I 052(008)-084 false ENQ MIM/CA fix QO94415.
  349 - IEC070I 210(8,17241)-220 CA Fastload fix UFLF254.
  350 - abend0c4 IDCIO01+1A5C REPRO,  Also, message PSP4755I
        records out of sequence. Only occurs with EMC
        Performance Essential product on z/OS 1.10, running with
        SIO option. Running with NOSIO does not cause problem.
        EMC fix is PSP31032. (PMR 63869,499 9/27/2009)
  

Problem summary

Problem conclusion

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels