IBM Support

II10001: OEM BUGS IN VSAM, CAT. & IDCAMS CAUSED BY OEM PROGRAMS OR OTHER IBM PRODUCTS. SEE 11013/11513/12140/12615/13278/14105

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as canceled.

Error description

  • This apar created to document and make readily searchable
    problems in the listed DFSMS products which are diagnosed
    caused by OEM programs or products. VsamBUGS infoapar1
    ************************************
    #1) ABEND0C4 in IGG0CLA3 at or near offset x'1de' for R1C0.
        REG5 bad and ACB area overlaid.
        Platinum Software ALTAI and ZARA products PTF x122atch
        with x122030 and x122041 also recomended.
    #2) Record management looping calling EOV because HURBA
        is not current.
        CA11 fix number TB91031.
    #3) IEC161I 040(056,006,IGG0CLFT) security error.  Problem
        reported when using ACF2 and INTERCONNECT from Sterling
        Commerce.  Fixed by CA ACF2 fix # TA3181C.  (msgIEC161I)
    #4) CAS ASID using 100% CPU and TSO users hung when in
        ISPF option 3.4. SVC dump of CAS ASID shows SVC26
        issued by PROSMS csect SMM3002A. Boole & Babbage fix
        number PR352P41. (PERFM Allocation performance)
    #5) Removed....
    #6) Abend0C4 in IDA0192B +x'28CC' issuing VSAM open
        for ACB. Boole & Babbage Coupling Facility measurement
        code problem. APAR number = BPM6144. Storage obtained
        for OEM call to macro IXLMG. An incorrect length is
        used when the storage is cleared for use and data in
        the next subsequent page of storage is overlayed,
        leading to unpredictable consequences, including the
        abend0c4 listed in this entry.
    #7) ABENDB78-14 in IEEMB830 followed by abend0c4 pic4 in
        IDA0200B +x'164E' at uw13651.
        OEM vendor TECHNOLOGICS, product CART.
        Solution: Apply CART upgrade to support MVS 5.2.
        I.E., assure CART version is running in support of
        MVS release in use. CART replaces IEEMB833 IBM code.
    #8) ABEND0B0 rc24 IAM200T or IAM0200T
        Innovation fix#:   p-63.0194
        the text of the problem is:
     "an acb is being closed which has in acbtiot offset value of 0.
        results in a failed swareq being issued by iam0200t."
    #9) Using ISPF 4.x to generate a DS list & using wildcards
        ( Generic or mask ) in dsname qualifiers RACF checking
        for tso userid access to catalog checked before access
        to ds names. ISPF 4.x uses Generic Filter Locate, a
        faster method which also allows more sophisticated
        masking in the dsname to access catalog info. GFL
        requires racf access to the catalog. ISPF 4.x and higher
        users will need to assure tso ids have UACC = READ to
        master and user catalogs.
    #10) MSGDFHFC0977 RC=8114,0028 (x'28'=40 rc40)
        Error opening multi-volume VSAM file with CICS R3.3
        dfsms1.3
        r1C0 and SAMS / COMPRESS (also known as SHRINK) by Sterling
        Software.
        SAMS fix number is SS02245 ( PRE SS02138 ).
    #11) SYSB error in SHOWCB macro use.
         SYSB-II Release 3.4.1 SHOWCAT failure,
         H&W Computer Systems Inc., problem 42293.
         Had 2 different initial descriptions of problem:
         - Getting user abend 1021 module IGZCPCO offset 96FA
         - ABENDU1021 MSGIGZ021i unsuccessful SHOWCB macro.
         Problem began occuring with R1C0.
    #12) CAS90 is CA's central control software that handles pro-
         duct passwords among other things, so this problem has the
         potential to effect almost everyone running CA software.
         T7M8419 is a "test" fix and is not yet available in any of
         the CA maintenance.  Problem is with ENF component.
         This is a memory overlay problem.  PMR#22042,004 symptoms
         included ABEND738 in ISGGSETU, ABEND730 in ISGLNQSQ, and
         ABEND0C4s, and everything "crashing."  This particular
         problem and an overlay of the 2nd VSI at offset +x'08' for
         4 bytes.  The remainder of that VSI and all other VSIs
         looked OK.
    
         ADDITIONAL SYMPTOM:
         ABEND0C4 in IDA0200B at or near x'1646' on
         Move Character Long MVCL instruction MVCL 0,6.
    .
    #13) ABEND0C4 in IDA019C1 when using SYSB product from
         H&W software. OEM product calling SHOWCB macro for
         a non-vsam file.
         OEM fix # 42001.
         OEM ABSTRACT: Place DB address in ACB.
    #14) MSGIEC161I RC52 RSN84 fail to open Alternate Index
         DS from batch job. OEM VIO/PLUS Repository "out-
         of-synch". Once repository synchronized problem
         resolved.
    

Local fix

  • #15) MSGIEC070I 104-204, 212-203 EOV error using STOPx37.
         STOPx37 zap numbers SX359-P-10, SX359-P01, SX359-P08,
         SX359-04, SX359-P13.
         OEM vendor Boole and Babbage.
    #16) Abend0c4 IGG0CLXE at x'62' R1C0 using Innovation
         Software product FDRABR version 5.2 at PTF level60.
         Fix number P-52.1107.
    #17) CICS abend0c4's preceded by abend179 rc50 in IDAEFSIO
         using OEM STOPx37.
         Boole & Babbage STOPx37 ZAP number: SX359P01
         OEM problem abstract:
    VERSIONS: Applicable to 3.5.9
    ABSTRACT: With DFSMS 1.3 the IGGDACRE is no longer residual in
              the EOVWA after the call to IDA0557B. Due to this fact
              X37 can not zero the UCB in the DACRE. If below DFSMS
              DFSMS 1.3 X37 will still find the DACRE and update as
              always. With DFSMS 1.3 we will continue with switch
              reduce. Also for switch reduce and DFSMS 1.3, R2 is a
              used register so we now use R4.
    #18) COBOL program issues Status Key 90 SK90 when
         dynamically adding candidate volume when VSAM
         file reaches End Of Volume EOV.
         OEM Sterling Software SAMS product fix number
         SA02842.
    #19) ABEND0C4 in IDCRP01 at or near x'5C4' R330 uy72284.
         Computer Associates SHAREOPTION 5 shareoption5
         product fix number LO00126.
    #20) After applying ptf for ow22126 VSAM ds's compressed
         with BMC Softwares VSAM COMPRESSION product cannot
         be opened. MSGIEC161I RC79 RSN81. BMC has ZAP for
         existing releases with redesign of EXLST logic
         in future releases.
    #21) Logic error of rc104 feedback 31080068 due to TERRASAM by
         Softworks using an OCO field in the RPL.  Fix number is
         SWAT026.216         (aka. TERASAM )
    #22) ABEND0C4 in IEAVEVAL while running REPRO.  REG1 is bad.
         Module calling IEAVEVAL is a Boole and Babage module,
         SMM40071.  B&B fix for PROSMS / STOPX37 is PR352P11 .
    #23) DEFINE takes too long and issues msgIEF237I and msgIEF285I
         and eventually times out.  Boole and Babage fix for
         POOLDASD is BB13244A .
    #24) INDEX component of VSAM ds grows nightly in
         Hi-alloc-rba, but hi-used-rba grows more slowly.
         Using CA's FAVER program; fix number A105944.
    .
    #25) When using extended indirect VOLSER support (OW25115) and
         ACF2 currently issues a return code that causes the
         substituted VOLSER instead of the symbolic VOLSER.  The
         ACF fix for ACFSMS 6.1 is TA3431I.
    #26) CPU 100% busy on tso uid in cas request.
         F CATALOG,RESTART clears problem. Panorama Software
         product Sunrise or Sunriz circumvention provided by
         fix number P83310, resolved in release 3.1.2.
    #27) ABEND223 IGG0CLXA at uw26421. OEM product
         " CA-VIEW SAR VTAM " fix numbers LO06590,
         LS07815 and LO10134. 5/7/97.
    #28) VSAM or NON-VSAM DS's on volser ARCIVE using OEM
         product DMS, DMSOS or SAMS DISK from Sterling
         Software. FMT1 DSCB is deleted and BCS entry shows
         VOLSER ARCIVE, equivalent to IBM MIGRAT, but VVR
         or NVR record of vvds not deleted. Caused by
         Sterling PTF SS02296, fixed by SS02438.
    #29) IDCAMS DELETE VVR or NVR for DS with no fmt1 dscb
         as in #28 above results in BCS entry being deleted.
         OEM products DMS, DMSOS or SAMS DISK intercept svc 26
         from idcams, change it from DELETE NVR or VVR to
         simple delete.
    #30) ABEND073 lock manager hierarchy abend caused by
         overlay overlayed overlaid of RAB ( RSM ASID Block).
         Problem occurs during dynamic string addition
         from COMPUWARE product XPEDITER ( EXPEDITER EXPEDITOR
         for easy searchability ). Fix number T333082L.
    #31) idc3351i rc206 idc3314i rplfdbwd x'000800ce'
         executing idcams repro infile.  (msgIDC3351I, msgIDC3314I)
       Product:  Performance Solutions Product (PSP)
       Vendor:   Softworks
       Component: Hyper-Load
       Fix:      PSPP2128.212
       CoReq:    PSPP2132.212
       PreReq:   PSPP2110.212, PSPP2121.212
       Additional Symptom:  Message PSP7702 or PSP6402
    #32)  Console log shows message:
    IEC161I RC32 (008,042,IGG0CLEG) for batch job while trying to
    open VSAM dataset. LISTCAT ENTRIES for dataset fails with
    abend0c4 in loadmod IDCLC01 + x'103AC'. Diagnose of usercatalog
    completes with no errors and the same dataset is listed with
    no errors message. OEM Sterling Software Zap for mod ZSURSVC
    is the fix for this problem.
    #33) Abend0c4 ICYDIE followed by many s0c4's in SMS ASID.
         These abends preceeded by s0c4 in BMC loadmod
         ASUSMAIN. BMC fix numbers B25650 and B28189.
    #34) ABEND0C4 +x'84' in CDBRDWR extended format ksds.
          CDB/SUPERUTILITIES
          V510
          B1075281
          HIGH
          ABEND S0C4 AT CDBRDWR+84 ON AN EXTENDED KSDS CALL
          UNDER DFSMS 1.3 (IN A NON RELATED JOB)
          CDB/SUBSYSTEM MUST BE RESTARTED FOR THE FIX TO
          TAKE EFFECT
    #35) Using CA TOP SECRET security product msgTSS7227E
         " Scratch access not granted to ds - (dsname) ",
         but ds is deleted anyway.
         RESOLUTION: TOP SECRET security profile for the
         ICF catalog resource was defined with " ALL ACCESS ".
         Per Appendix A, Security Authorization Levels of
         the Access Method Services for Integrated Catalog
         Facility manual and the CA TOP SECRET Users Guide
         Chapter 7, Protecting Resources, topic= "securing
         catalogs", a DELETE is an 'either-or' operation.
         Either the user must have security authorization
         to the dataset resource or to the catalog resource.
    #36) ABEND0C4 IDA0557B +X'90'. REG 7 points to low storage.
         STOPX37 or PROSMS needs maintenance applied for R1C0
         DFSMS compatibility.
    #37) CA optimizer abend0c9 msgdfs0427i
         "logical database error code v9c"
         CA fix number TD05560 via SMP/E U-mod.
    #38) IEC161I 079-081 79-81 FastVsam fix number EWV0698.
    #39) Multiple ABEND378 CDBUtility after UW34547 refer to
         II10320.
    #40) Using FDR from Innovation to restore multi-volume
         VSAM DS. Subsequent listcat shows volsers ####xx
         where xx are the last two characters of the volser
         the ds had been on. Also, listcat does not show
         ds as vsam. Until ds is fully restored FDR uses
         #### as a way to identify internally where the
         ds is in the restore process. If the job is interrupted
         as with an operator cancel the volsers will be left
         as ####xx. Re-run the restore.
    #41) High Strno value put in jfcamstr (field in jfcb ) by
         OEM Pooldasd product.Fix Number is
         PD332C07 Rel 3.3.2 MM or ERB 07/09/97
    #42) Msgiec070i rc203 rsn204 Boole & Babbage Mainview/MVS
         Mainview fixed by BPY3255     erb 07/11/97
    #43) ABEND0C4 IDA0557A +x'1D2'. Reg 10 loaded from EXTARDB3 is
        zero. IMBED KSDS only DFSMS R1C0. PROSMS STOPX37 REL 3.5.3
        only by Boole and Babbage. PROSMS fix is PR353P07. idc3350i
        Additional symptom: When extending a data set to another
        volume the new extent is not formatted. CICS transaction
        abends when writing to the data set. Examine of data gets
        msgIDC3350I 97184,07391416,000021D68000,D.M2VA02,E00954,
        13C,DA,SYS00001,86- OP,INCORR. Length , 000000F2000101,VSAM
    #44) ABEND301 KERNDUMP 301/AKEB offset x'ffff' in DFHCCCC.
         AKEB double wait on VSAM ECB.
         OEM CAFC (NETTECH). Problem is in release 4200
         maintenance level #0434C and resolved in release 4200
         #0809C.
    #45 MSGIEC161I RC58 RSN61 for VSAM ds followed by
        ABEND0C4 in TSO module IKJEFF19. Timestamps are out
        of synch which can be caused by duplicate VVRs. Problem
        resolved by de-activating the OEM VCP by Sofworks and
        re-activating it. Customer also restored damaged clusters.
    #46 ABEND0C4-10 occurring in MANY address spaces, had to IPL.
        Dump shows an overlay in chain of VSI control blocks.
        Problem seems to have gone away after applying temporary
        fix TA3181D for ACF2 6.2.
    #47 CA-1 MVS Tape Management R 5.2 issues the message CAG8009e
        ( msgCAG8009e ) erroneously, fixed by T5XD644.
    #48 MSGIEC999I IDA0557B,...
        ABEND0C4 is actually in SAMS code.  Fix from Sterling
        Software is PI162742.
    #49 Invalid data in SMF type65 (SMF65 SMFtype65) record.  Fix
        from CA-1 is TF45053 (Release 5.2). Jobname may be NULLJOB.
    #50 Hang when doing an IMPORT of an ICF catalog because open is
        intercepted by OEM and another Open issued. Fix is available
        from Sterling for "Compress for MVS" (aka SHRINK).
        MSGIEC376W CAS ALLOCATION TASK IS WAITING FOR ALLOCATION
        ZSURSVC at SS01319 (5.1) has the problem, SS02896 (5.2)
        works correctly.
    #51 ABENDA78 in PROSMS code during PROSMS EOV of VSAM
        DS. VDT pointer in AMBL is not correct.
        PROSMS fix number PR353P15.
    #52 HIPERCACHE product gives msg VVHC309I CATALOG
        RETURN CODE IS 140 - REASON CODE IS IGG0CLFH -
        078, which translates to MSGIDC3009I.  Doc is
        unclear but this relates to STRIPEd datasets.
        Must apply OW26065/UW39395.
    #53 Using OEM "Space Recovery System" release 2.1.14
        allocate SYSUT2 ds with DISP=(NEW,CATLG,DELETE)
        and get abendE37-08 or other space failure for
        multi-volume ds. Joblog shows ds deleted as with
        msgigd105i in sms managed case. However, only the
        BCS entry is deleted. VVDS entry and FMT1 DSCB
        not deleted.
        OEM fix number DTS20070.
    #54 MSGIEC161I 052-061 on all OEM VCP from SOFTWORKS
        compressed files being opened via AIX path name
        under CICS after migrating to DFSMS R1C0. rc52 rsn61
        Two fixes required:
        SWAK003.128 and SWAK014.128
    #55 MSGIEC161I 079-081 exit list overlay using
        Recovery Plus CICS/VSAM when migrating to DFSMS
        R1C0. Check with vendor BMC Software for
        required fix(es).   rc79 rsn81
    #56 S0C4 in IDA0192B. The 1st 2 bytes of cat name pointer in VSI
        control block are overlaid. Also seen as s0c4 in IDA0200T:
        the HEB control block has a 2 bute overlay. Error in TD00734
        (1.3) or TD00735 (2.0) levels of TMON/MVS by Landmark. Fix
        is TD00886. 1/29/99 according to Sam Knutson fix is in base
    #57 - IDCAMS REPRO causes msgIDC1146i RC4--data set marked for
    forward recovery.  Data set is not RLS.  Customer using IAM.
    IAM is providing fix P-63.0154 for IAM V6.3/15p and above.
    #58 - MSG CAG8009E during IDCAMS DELETE USERCATALOG.
         CA-1 5.2 FIX T5XD644.
    #59 -MSGIEC331I 004-86 on usercatalog at cas startup - fix is
         Bimshare 1.0H Vsam Open Close Router
    #60 MSGIEC130I DD statement missing when using
    SYNCSORT and opening a compressed VSAM dataset
    

Problem summary

Problem conclusion

Temporary fix

Comments

  • Closed for INTERNET viewing.
    DB2INFO VSAMINFO
    

APAR Information

  • APAR number

    II10001

  • Reported component name

    V2 LIB INFO ITE

  • Reported component ID

    INFOV2LIB

  • Reported release

    001

  • Status

    CLOSED CAN

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    1996-12-13

  • Closed date

    1997-12-02

  • Last modified date

    2005-10-20

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels

[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19N","label":"APARs - OS\/390 environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"001","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"001","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":null,"label":null},"Product":{"code":"SG19O","label":"APARs - MVS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"001","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SSSN3L","label":"z\/OS Communications Server"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"001","Edition":"","Line of Business":{"code":"LOB35","label":"Mainframe SW"}}]

Document Information

Modified date:
20 October 2005