APAR status
INTRAN
Error description
Do NOT CLOSE this APAR. Leave it in INTRAN status. ===================================================== This apar documents changes to the DB2 Diagnosis Guide & Reference LY27-9603-00 which did not make V3 GA pubs. Continued in Info. APAR II07863. 5740XYR00 R310 DB2 ========================================================== Book Title: Diagnosis Guide and Reference Page Number: title page Change Description: Replace the CD-ROM number listed as LK27-1233 with CD-ROM LK2T-1233. ============================================================ Version 3 Book Title: DIAGNOSIS REFERENCE Pages: 131 Change Description: 8-byte CSECT maintenance level This line will replace: 8-byte number of the last APAR applied to this CSECT ============================================================== Version 3 Book Title: DB2 Diagnosis Guide and Reference Pages: 148, 149 Change Description: Add a description of the information that the VRA keys identify in Tables 15 through 22. (VRARK17 and VRARK18 will be added when the description is available) ----------------------------------------------------------- Code Key Hex Data Item Name Value 00E50013 VRAHEX 38 Hexadecimal information VRARRP 10 Hexadecimal recovery routine parameter list, with 24 byte maximum length if FRR. Can be preceded by a VRAPLI or VRACBM ID. ----------------------------------------------------------- Trace VRAPLI 20 EBCDIC data that identifies the Super parameter list in the next data field. VRAPL 21 Variable length data that contains the trace parameter list. ----------------------------------------------------------- 00E60887 VRARRC 06 Abend reason code 00E60888 VRARFP 20 Internal instrumentation mapping macro ============================================================== Book Title: Diagnosis Guide and Reference Page Number: 264 Change Description: In table 50 'Number of pages covered by segmented space map page', replace the seventh line describing the 4KB page: '28 165 4616 DA5' with: '28 165 4620 DA5'. ============================================================== Book Title: Diagnosis Guide and Reference Page Number: 266 Change Description: Add a new section 'Zero Pages' in the first column preceding 'Data Pages': Zero Pages A zero page is an empty page without a header or trailer. It can be a 4KB page full of zeroes or a 4KB page full of zeroes with only the parady bits on. Zero pages can exist in a segmented table space. For example, consider a segmented table space that contains four pages. The first page is full. The second, third and fourth pages are zero pages. When DB2 formats the table space, the entire segment is formatted with three of the four pages not in use. =============================================================== Version 3 Book Title: Diagnosis Guide and Reference Pages: 271 Change Description: At the end of the second column under the heading 'With a Clustering Index' change: "...the candidate page is the page containing the row with the next lower key or the last duplicate key of the key of the new row." to: "...the candidate page is the page containing the row with either the next lower key, the next higher key, or the last duplicate key of the key of the new row." =============================================================== Book Title: Diagnosis Guide and Reference Page Number: 311 Change Description: In table 56 'File Page Set Header Page', replace the description of the HPGPGSZ bit in location 2E: 'Page size in multiples of 4KB. '=1' for 4K page size. '=8' for 32KB page size' with: 'Page size in multiples of 4. X'1000' for 4K page size. X'8000' for 32K page size'. =============================================================== Book Title: Diagnosis Guide and Reference Page Number: 312 Change Description: In table 56 'File Page Set Header Page', remove the HPGUIDX bit from location 44. ================================================================ Book Title: Diagnosis Guide and Reference Page Number: 316 Change Description: In table 60 'Record/Overflow Record', replace the description of the third PGSFLAGS bit 'Yes, if entry points to overflow record' with 'Yes, if entry is an overflow record.' ================================================================ DB2 Diagnosis Guide and Reference, LY27-9603-00 Page 316 under Record/Overflow Record (Table 60) Should read: 00 PGSFLAGS Bit(8) Flag byte. | ..1. .... Yes, if overflow record. .... .1.. Yes, if record is compressed. .... ..1. Record is possibly uncommitted ============================================================== Book Title: DB2 Diagnosis Guide and Reference Page 316 (Table 61) Change Description: In table 61, for PGSFLAGS, replace this line: SIZE DESCRIPTION ---- ----------- X'40' Pointer record. with these lines: |00 PGSFLAGS Bit(8) Flag byte. | .1.. .... Yes, if pointer record. | .... ..1. Record is possibly uncommitted ============================================================== Version 3 Book Title: Diagnosis Guide and Reference Pages: 317 Change Description: Change the description of PGLZDMLL: LOC NAME SIZE DESCRIPTION --- ---- ---- ----------- 10 PGLZDMLL FIXED(16) Length (in bytes) of dictionary entries on this page. Add 2 entries to the end of the table: FF8 PGLZDMI2 CHAR(6) Integrity check field 2. FFE PGLZDMFF CHAR(2) Standard page tail. ================================================================ Book Title: Diagnosis Guide and Reference Page Number: 381 Change Description: Add the following two missing entries to the DSNDB01 cross- reference table. OBID dec (hex) Corresponding Object 132(84) Index page set DSNSPT01 148(94) Index page set DSNSPT02 ============================================================== Book Title: Diagnosis Guide and Reference Page Number: 443 Change Description: Replace the hex offsets in the CSUB control block listed as zeros with the following offsets: Hex Field Offset Name 000000 CSUBSAVE 000048 CSUBID 00004F CSUBCHAP 000050 CSUBSON 000058 CSUBSON2 000060 CSUBXSAC 000064 CSUBATOK 00007A CSUBRSOF 00007B CSUBSONS 000083 CSUBPIID 00008B CSUBSN2S 000094 CSUBPSBL 000098 CSUBTCB 00009C CSUBRDYQ 0000A0 CSUBFRB 0000C0 CSUBCTYP 0000C1 CSUBTTYP 0000C2 CSUBCRNO 0000C4 CSUBTRAN 0000C8 CSUBCFIL 0000D0 * 0000D0 CSUBWORK 00010C CSUBNTID 00011C CSUBERRS 000150 CSUBSRV 000150 * 0000D6 CSUBRELP Cross Reference by Field Name CSUBATOK 64 CSUBCFIL C8 CSUBCHAP 4F CSUBCRNO C2 CSUBCTYP C0 CSUBERRS 11C CSUBFRB A0 CSUBID 48 CSUBNTID 10C CSUBPIID 0 CSUBPSBL 94 CSUBRDYQ 9C CSUBRELP D6 CSUBRSOF 7A CSUBSAVE 0 CSUBSN2S 8B CSUBSON 50 CSUBSONS 7B CSUBSON2 58 CSUBSRV 150 CSUBTCB 98 CSUBTRAN C4 CSUBTTYP 0 CSUBWORK 0 CSUBXSAC 60 ============================================================= This information is continued in Info. APAR II07863.
Local fix
Problem summary
Problem conclusion
Temporary fix
Comments
APAR Information
APAR number
II07451
Reported component name
PB LIB INFO ITE
Reported component ID
INFOPBLIB
Reported release
001
Status
INTRAN
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt
Submitted date
1993-12-29
Closed date
Last modified date
1998-06-03
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Fix information
Applicable component levels
[{"Business Unit":{"code":null,"label":null},"Product":{"code":"SG19O","label":"APARs - MVS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"001","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSEPEK","label":"Db2 for z\/OS"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"001","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
Document Information
Modified date:
14 December 2020