II07160: ABEND0C4 RC10 IN IEAVEPST IN A CICS REGION

APAR status

• INTRAN

Error description

• A CICS REGION receives ABEND0C4 RC10 in IEAVEPST with
  REG14 pointing to IEAVEGLU + x'18'.  This is the result of a
  cross memory post with a bad ECB being passed.  In this case
  an OEM CICS monitor is doing the cross memory post.  Please
  contact the IBM support center to verify the name of the OEM
  and their fix number.
     VERIFICATION STEPS:
        1.  IPCS STATUS FAILDATA.  The psw will be in IEAVEPST
  possibly around offset x'BE0' for MVS/ESA R422 at UY86935.
  If you have no FAILDATA, this information can be found
  in the logrec record for the abend.
      2.  IPCS VERBX TRACE 'CURRENT'.  Find the pgm 010
  entry for the abend, this can be done with a search on
  the second word of the failing psw.  Look above that line
  for an SRB.  The unique fields for this trace entry are
  for REG15, REG0 and REG1.  REG15 will have an asid in
  hex.  Identify the job that runs in this asid.  If this
  is an OEM CICS monitor, this is your problem.  You can
  further verify this by the following:
     3.  IPCS L aaaaaaaa. STR(SRB).  Where aaaaaaaa is
  the address in REG0 of the SRB trace entry.  This is
  the SRB.  Its PASID and ASCB fields will point to the OEM
  address space and the EP field will point to IEAVEPST.
    4.  If these verification steps do not match your
  problem, refer to II05965 for additional verification
  procedures.
  

Local fix

• Contact IBM support center for name of OEM vendor and their
  known fixes, if any.
  

Problem summary

Problem conclusion

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels