Preventive Service Planning
Abstract
Configuration Information for HP StorageWorks DAT72x10 Autoloader
Content
HP StorageWorks DAT72x10
|
Drive Addresses
|
Storage Slot Addresses
|
Changer Address
|
Entry/Exit Slot Address
|
|
1
|
1001-1010
|
0
|
N/A
|
Notes:
1. Library capacity
-
1 drive 10 slots
2. Barcodes are not supported.
3. Device identifications and firmware levels used during validation with TSM 5.4.0
-
Library ID : HP DAT Autoloder --- Firmware : 1.00
Drive ID : HP C7438A --- Firmware : ZP63
4. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported.
5. HP DAT72x10 autoloder is available with HP C7438A drive.
Library and drive may require different minimum Tivoli Storage Manager levels. Therefore, ensure that both library and drive hardware are supported. See " Supported Devices for AIX, HP-UX, Solaris and Windows" or " Supported Devices for Linux" for minimum supported version levels and platforms for these devices.
More information regarding device configuration is available in the Tivoli Storage Manager Administrator's Guide, which can be found in the IBM Tivoli Storage Manager information center.
Rate this page:
Average rating
Copyright and trademark information
IBM, the IBM logo and ibm.com are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.