Preventive Service Planning
Abstract
Configuration Information for HP StorageWorks 1/8 Ultrium 960 Autoloader
Content
HP StorageWorks 1/8 Ultrium 960
|
Model
|
Drive Addresses
|
Storage Slot Addresses
|
Changer Address
|
Entry/Exit Slot Addresses
|
|
All
|
86
|
1-8
|
82
|
N/A
|
|
|
||||
Notes:
1. Library capacity
-
1 drive 8 slots
2. Barcodes are supported only when a barcode reader is installed. When a barcode reader is not installed, the autoloader may return the barcode information, such as SLOT000x where x is the number of storage slot. This barcode value is not from the actual barcode label. We do not recommend using this barcode value as a volume name.
3. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE commands is supported.
4. Device Identifications and firmware levels used during validation
-
Library : HP 1x8 autoloader --- Firmware : 1.20
Drive : HP Ultrium 3-SCSI --- Firmware : G38W
5. HP 1x8 Ultrium 960 Autoloader is available with HP Ultrium 960 drives.
6. Other HP StorageWorks 1x8 models include
Related APAR
- IC50007 ANR8418E I/O ERROR ON DEFINE PATH TO HP STORAGEWORKS 1/8 ULTRIUM 960
Library and drive may require different minimum Tivoli Storage Manager levels. Therefore, ensure that both library and drive hardware are supported. See " Supported Devices for AIX, HP-UX, Solaris and Windows" or " Supported Devices for Linux" for minimum supported version levels and platforms for these devices.
More information regarding device configuration is available in the Tivoli Storage Manager Administrator's Guide, which can be found in the IBM Tivoli Storage Manager information center.
Rate this page:
Average rating
Copyright and trademark information
IBM, the IBM logo and ibm.com are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.