NEC L0101H and Tandberg Autoloaders Configuration Information for IBM Tivoli Storage Manager Server

Preventive Service Planning


Abstract

Configuration Information for NEC L0101H and Tandberg Desktop Autoloaders

Content

NEC DL0101H-0E
NEC LL0101H-0A
NEC SL0101H-0S
Tandberg DLT 8000 Autoloader
Tandberg LTO Autoloader
Tandberg SDLT Autoloader
Tandberg Desktop Loader LTO3

Model
Drive Addresses
Storage Slot Addresses
Changer Address
Entry/Exit Slot Address
All
82
0-9
86
N/A

Notes:

1. Maximum numbers of drives and storage slots supported
    1 drive 10 slots

2. Barcodes are supported. When the barcode option is enabled, the autoloader reports only 9 storage slots. The 10th physical storage slot with element address 9 will not be reported and is inaccessible.

3. The first character of the NEC model names designates the type of tape drive in the autoloader.
    NEC DL0101H-0E contains a DLT 8000 tape drive.
    NEC LL0101H-0A contains an LTO tape drive.
    NEC SL0101H-0S contains an SDLT tape drive.

4. The autoloaders are available with DLT 8000, SDLT, LTO-1, LTO-2, and LTO-3 drives.

5. The IBM device driver is required for the IBM Ultrium drives.

6. Device identifications and firmware levels used during validation
    NEC DL0101H-0E & Tandberg DLT 8000 Autoloader
    Library ID : NEC DL0101H --- Firmware : 0002
    Drive ID : QUANTUM DLT 8000 --- Firmware : 022B

    NEC LL0101H-0A & Tandberg LTO Autoloader
    Library ID : NEC LL0101H-0A --- Firmware : 0002
    Drive ID : IBM ULTRIUM-TD1 --- Firmware : 0BN1

    Library ID : NEC LL0101H-0A --- Firmware : 0002
    Drive ID : IBM ULTRIUM-TD2 --- Firmware : 2B81

    Library ID : NEC LL0101H-0A --- Firmware : 0004
    Drive ID : IBM ULTRIUM-TD3 --- Firmware : 52E0

    Library ID : NEC LL0101H-0A --- Firmware : 0004
    Drive ID : HP Ultrium 2-SCSI--- Firmware : S53N

    (Validated with TSM 5.3.1.2)
    Library ID : NEC LL0101H-0A --- Firmware : 0004
    Drive ID : HP Ultrium 3-SCSI --- Firmware : G2BN

    (Validated with TSM 5.3.5)
    Library ID : NEC LL0101H-0A --- Firmware : 0004
    Drive ID : IBM ULTRIUM-HH3 --- Firmware : 6BA0

    NEC SL0101H-0S & Tandberg SDLT Autoloader
    Library ID : NEC SL0101H-0S --- FW: 0003
    Drive ID : QUANTUM SuperDLT1 --- FW: 2424

    Tandberg Desktop Loader LTO3
    Library ID : NEC LL0101H-0A --- FW: 0004
    Drive ID : IBM ULTRIUM-TD3 --- Firmware : 5BG2

7. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE commands is not supported on these autoloaders.



Library and drive may require different minimum Tivoli Storage Manager levels. Therefore, ensure that both library and drive hardware are supported. See " Supported Devices for AIX, HP-UX, Solaris and Windows" or " Supported Devices for Linux" for minimum supported version levels and platforms for these devices.

More information regarding device configuration is available in the Tivoli Storage Manager Administrator's Guide, which can be found in the IBM Tivoli Storage Manager information center.

Rate this page:

(0 users)Average rating

Add comments

Document information


More support for:

Tivoli Storage Manager
Server

Software version:

All Supported Versions

Operating system(s):

AIX, HP-UX, Linux x86, Solaris, Windows

Reference #:

1137617

Modified date:

2009-10-27

Translate my page

Machine Translation

Content navigation