Preventive Service Planning
Abstract
Configuration Information for Quantum M2500 and Tandberg M2500.
Content
Quantum M2500
Tandberg M2500
|
Model
|
Addresses of Drives
|
Addresses of Storage Slots
|
Address of Changer
|
Addresses of
Entry/Exit Slots |
|
M2500
|
128-147
|
192-491
|
32
|
176-187
|
|
Quantum M2500
|
||||
Notes:
1. Barcodes are supported.
2. The libraries can be configured to provide import/export elements in the form of either single slot mailbox or 12-slot mailbox.
3. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported.
4. The product identification must be set to M2500. Otherwise, defining a path to the library may fail with completion code 320 (DD_RES_MISMATCH).
5. Device identifications and firmware levels used during validation
-
Library : ATL M2500 --- Firmware : 3.01
Drive : HP Ultrium 1-SCSI --- Firmware : E15V
6. Quantum M2500 was previously ATL M2500.
Library and drive may require different minimum Tivoli Storage Manager levels. Therefore, ensure that both library and drive hardware are supported. See " Supported Devices for AIX, HP-UX, Solaris and Windows" or " Supported Devices for Linux" for minimum supported version levels and platforms for these devices.
More information regarding device configuration is available in the Tivoli Storage Manager Administrator's Guide, which can be found in the IBM Tivoli Storage Manager information center.
Rate this page:
Average rating
Copyright and trademark information
IBM, the IBM logo and ibm.com are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.