ADIC FastStor 2, BDT ThinStor, and HP StorageWorks 1/8 Configuration Information for IBM Tivoli Storage Manager Server

Preventive Service Planning


Abstract

Configuration Information for ADIC FastStor 2, BDT ThinStor, and HP StorageWorks 1/8

Content

ADIC FastStor 2
BDT ThinStor
HP StorageWorks 1/8

Model
Drive Addresses
Storage Slot Addresses
Changer Address
Entry/Exit Slot Addresses
With AIT drive
82
1-10
86
N/A
Others
82
1-8
86
N/A

Notes:

1. Maximum numbers of drives and storage slots supported
    With AIT drive - 1 drives 10 slots
    With LTO or DLT drive - 1 drive 8 slots

2. Barcodes are supported.

3. Device Identifications and firmware levels used during validation

    ADIC FastStor 2
    • Library ID : ADIC FastStor 2 --- Firmware : A11r
    • Drive ID : HP Ultrium 1-SCSI --- Firmware : E33A

    BDT ThinStor
    • Library ID : BDT ThinStor AutoLdr --- Firmware : C12r
    • Drive : SONY SDX-700C --- Firmware : 0102

    BDT ThinStor SDLT 320
    • Library ID : BDT ThinStor AutoLdr --- Firmware : T16r
    • Drive : QUANTUM SDLT320 --- Firmware : 3838

    HP StorageWorks 1/8 SDLT 320
    • Library ID : HP ThinStor AutoLdr --- Firmware : L12r
    • Drive ID : COMPAQ SDLT320 --- Firmware : 4B4B

    HP StorageWorks 1/8 Ultrium 230
    • Library ID : HP ThinStor AutoLdr --- Firmware : H33r
    • Drive ID : HP Ultrium 1-SCSI --- Firmware : E00P

    HP StorageWorks 1/8 Ultrium 460
    • Library ID : HP ThinStor AutoLdr --- Firmware : N12r
    • Drive ID : HP Ultrium 2-SCSI --- Firmware : F57V

4. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE commands is supported.

5. ADIC FastStor 2 is available with SDLT 320, LTO-1 and LTO-2 drives. ADIC FastStor 2 with SDLT 600 or LTO-3 drives has product ID " FastStor 2.1". See ADIC FastStor 2.1 for configuration information. TSM 5.3.3.2 is required for ADIC FastStor 2.1.

6. BDT ThinStor is available with AIT-1, AIT-2, AIT-3 and SDLT 320 drives.

7. HP StorageWorks 1/8 is available with LTO and SDLT 320 drives. For HP StorageWorks 1/8 vs80 see " Configuration Information for HP StorageWorks 1/8 DLT vs80".



Library and drive may require different minimum Tivoli Storage Manager levels. Therefore, ensure that both library and drive hardware are supported. See " Supported Devices for AIX, HP-UX, Solaris and Windows" or " Supported Devices for Linux" for minimum supported version levels and platforms for these devices.

More information regarding device configuration is available in the Tivoli Storage Manager Administrator's Guide, which can be found in the IBM Tivoli Storage Manager information center.

Rate this page:

(0 users)Average rating

Add comments

Document information


More support for:

Tivoli Storage Manager
Server

Software version:

All Supported Versions

Operating system(s):

AIX, HP-UX, Linux, Solaris, Windows

Reference #:

1107987

Modified date:

2009-07-06

Translate my page

Machine Translation

Content navigation