Exabyte 690D Configuration Information for IBM Tivoli Storage Manager Server

Preventive Service Planning


Abstract

Configuration Information for Exabyte 690D

Content

Exabyte 690D

Drive Addresses
Storage Slot Addresses
Changer Address
Entry/Exit Slot Address
451-456
1-75
501
401-405
Figure AB0CT452 not displayed.

Notes:

1. Library capacity
    6 drives 90 slots

2. Barcodes are supported. For the barcode, use the manufacturer supplied barcode.

3. Device identifications and firmware levels used during validation

    Library: EXABYTE Exabyte 690D --- Firmware: 1.05
    Drives: QUANTUM DLT7000 --- Firmware: 1E46

4. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is not supported.

5. The library is available with DLT 7000 drives.

6. A fixed slot (address 0) is present to hold a cleaning cartridge for the tape drives. The cleaning cartridge must be checked into the slot before the cleaning.

7. Three control modes (LCD mode, Serial Port Mode and SCSI Mode) are available. Configure the control mode as SCSI for Tivoli Storage Manager purposes.



Library and drive may require different minimum Tivoli Storage Manager levels. Therefore, ensure that both library and drive hardware are supported. See " Supported Devices for AIX, HP-UX, Solaris and Windows" or " Supported Devices for Linux" for minimum supported version levels and platforms for these devices.

More information regarding device configuration is available in the Tivoli Storage Manager Administrator's Guide, which can be found in the IBM Tivoli Storage Manager information center.

Rate this page:

(0 users)Average rating

Document information


More support for:

Tivoli Storage Manager
Server

Software version:

All Supported Versions

Operating system(s):

AIX, HP-UX, Linux x86, Solaris, Windows

Reference #:

1052339

Modified date:

2009-07-07

Translate my page

Machine Translation

Content navigation