Sending events to the TEC Server via Non-TME if TME Method Fails

TMR A (TMR + TEC Server)

TMR B (TMR Gateway Interconnected to TEC TMR)

There are occasions where the TEC Server TMR will be up and running, but the Gateway TMR will be taken down for maintenance. During this maintenance period, the adapter needs to have the ability to send events received to the TEC Server vi NON-TME Communication.

In order to set this up, the Adapter Configuration file needs to have a second entry for the Transport List. Basically, the adapter will try to use the TME Communication and if that fails, it will then try to use NON-TME Communication. Below is an example (In this particular case, the ip address of the Event Server is 1.1.1.1):

# Thu Aug 24 16:06:58 2006
#
# tecad_win Configuration
#
PreFilterMode=OUT
#
EventMaxSize=4096
BufEvtPath=C:\WINDOWS\cachefile.out
PollInterval=3
Pre37Server=no
SpaceReplacement=TRUE
LanguageID=ENGLISH
FQDomain=NO

LogSources=/tmp/logsource.out

TransportList=t1_
c1_ServerLocation=@EventServer
c1_Port=36775
t1_Channels=c1_
t1_Type=LCF

TransportList=t2_
c2_ServerLocation=1.1.1.1
c2_Port=36775
t2_Channels=c2_
t2_Type=SOCKET

WINEVENTLOGS=NONE
#