V7.3.0.13 - IBM Storwize V7000 Code

Download Description

IBM Storwize V7000 release V7.3.0.13 (code level 97.6.1601070000)

If you are unsure about which version to use for your system, consult your IBM or IBM Business Partner representative.

Please refer to the following Concurrent Compatibility information to identify the appropriate upgrade path:

• IBM Storwize V7000 Software Upgrade Reference
• Storwize V7000 Code and Hardware Interoperability Matrix



Information for Storwize V7000 Unified systems
The Storwize V7000 Unified software package includes any software updates that are available for both file modules and Storwize V7000 block storage. All updates are automatically applied as part of the upgrade process. It is not necessary to upgrade file storage and block storage separately. Click here for upgrade information for Storwize V7000 Unified systems.


This code release may contain critical fixes. All customers are strongly advised to read the accompanying release note to determine whether they are currently exposed to any issues that are fixed in this release.

Some code releases do not include all security fixes. Customers are strongly advised to consult the published Security Bulletins below to determine which security issues are fixed in this code.
Flashes, alerts and bulletins for IBM Storwize V7000 (2076)

We also recommend you refer to the following documents before upgrading:


• V7.3 Supported Hardware List, Device Driver, Firmware and Recommended Software Levels for IBM Storwize V7000
• V7.3 Configuration Limits and Restrictions for IBM Storwize V7000


To avoid potential problems, any exceptions to supported interoperability MUST be requested via an approved RPQ (SCORE) agreement. Please contact your IBM representative or authorized IBM Business Partner to request support.


Important Upgrade Information


V6.4.0.0 introduced Real-time compression. It is important to note that when the first compressed volume is created, the performance of existing volumes may be affected due to re-allocation of hardware resources.

Please refer to the IBM Real-time Compression in SAN Volume Controller and Storwize V7000 Redpaper for more details:

http://www.redbooks.ibm.com/Redbooks.nsf/RedpieceAbstracts/redp4859.html


Please ensure you have read the release note and are familiar with the following Flash Announcements before upgrading:



Important: Once the software upgrade has completed, the new software will check the version of firmware on all components in the system, except the drives. If any upgrades are needed then the system will automatically perform these upgrades. NOTE: If the Power Supply Unit firmware needs to be upgraded then the fans on that enclosure will run at full speed for a short time and all LEDs on the PSU will flash. This is normal and can be ignored. If the fans are running at full speed without the LEDs flashing, or if the system stays in the fan full state on the same power supply unit then this may indicate a hardware fault.

Global Mirror Relationships Must Be Stopped When Upgrading to V7.2.0 or above

Moving Volumes to Another I/O Group Without Stopping Host Activity is Not Supported for All Operating Systems

SAN Volume Controller and Storwize V7000 Software Upgrade Test Utility

If a SAN Volume Controller or Storwize V7000 Code Upgrade Stalls or Fails then Contact IBM Support for Further Assistance

Intra-Cluster Global Mirror Not Supported With V6.x or V7.x



If upgrading from a version prior to V7.3.0.1 please be aware that this upgrade introduces a new cache architecture. For the duration of the upgrade the cache will be disabled for the entire system, which may affect performance. Once this upgrade has completed the cache will be automatically re-enabled.
This system-wide cache disable is only required when installing the new cache architecture for the first time. Subsequent upgrades will not disable the cache on the entire system.


You should ensure that the system event log does not contain any unfixed events prior to applying a software upgrade, since these events may prevent a successful upgrade. Use the Troubleshooting, Recovery and Maintenance Guide to fix any outstanding errors. In addition to checking the system event log IBM also strongly recommend using the upgrade test utility. Contact IBM Support if you require assistance.


The Storwize V7000 ships with a USB key which is pre-installed with the Storwize V7000 Initialization Tool. If the USB key is misplaced, this tool can be downloaded from the link below and copied onto the root directory of any USB key formatted with a FAT32, ext2 or ext3 filesystem.
IBM Storwize V7000 Initialization Tool

Keep Informed of Updates

Keep up to date with the latest product information by subscribing to receive support notifications



Legal Agreement

THE FOLLOWING DOWNLOADS CONTAIN UPDATES AND FIXES TO CODE THAT WAS ORIGINALLY PROVIDED WITH THE IBM STORWIZE V7000 SOLUTION, INCLUDING THE IBM STORWIZE V7000 SOFTWARE. THE UPDATED CODE IS SUBJECT TO THE TERMS AND CONDITIONS OF THE LICENSE AGREEMENTS APPLICABLE TO THE CODE THAT IT UPDATES INCLUDING, AS APPROPRIATE, THE IBM AGREEMENT FOR MACHINE CODE AND IBM INTERNATIONAL PROGRAM LICENSE AGREEMENT. BY DOWNLOADING THE FOLLOWING FILES, YOU ARE AGREEING TO TREAT THE UPDATED CODE IN ACCORDANCE WITH THE APPLICABLE LICENSE AGREEMENTS.