Storage support > Storage software > SAN Volume Controller (2145)

V5.1.x - Supported Hardware List, Device Driver and Firmware Levels for SAN Volume Controller

Preventive Service Planning

Abstract

The documents titled Supported Hardware List and Recommended Software Levels provide the operating systems, Host adapters, SAN fabric elements, RAID controllers and selected other hardware that have been tested or qualified by IBM.

For operating systems, we show the latest tested release levels and service packs. Only the listed operating systems are supported. For host adapters, SAN fabric elements and RAID controllers, we list our currently recommended firmware and/or BIOS levels and formally support only the hardware listed.

While these levels are not mandatory levels for a customer to be supported by IBM, they are the recommended levels. There may be known operational issues with older firmware and BIOS levels and, in these cases, a customer working with the IBM Support Centre may be directed to upgrade a component to a recommended level.

SVC will support all OS applications at any level that run to the standard block level OS interface. This includes such applications as Oracle, HP Virtual Connect, etc.

Note:
* The levels shown in italic text indicate previously recommended levels.
* The level shown in bold text indicates the latest recommended level.

Content

Whilst IBM recommends these levels based upon the most recent testing, the following levels were tested against previous versions of SVC and IBM will support the use of these levels with SVC V5.1.x

V4.3.x - Supported Hardware List, Device Driver and Firmware Levels for SAN Volume Controller

V4.2.x - Supported Hardware List, Device Driver and Firmware Levels for SAN Volume Controller

V4.1.x - Supported Hardware List, Device Driver and Firmware Levels for SAN Volume Controller

V3.1.0 - Supported Hardware List, Device Driver and Firmware Levels for SAN Volume Controller

V2.1.0 - Supported Hardware List, Device Driver and Firmware Levels for SAN Volume Controller

Hosts	Last Updated
Windows NT 4.0	08 Jul 2008
Windows 2000 and 2003 Server	08 Jul 2008
Windows 2003 Server using MPIO	21 Nov 2008
Windows 2008 Server using MPIO	21 Nov 2008
Windows 2008 Server Hyper-V	20 Nov 2008
Red Hat EL 2.1 U7	27 Jun 2008
Red Hat EL 3.0 U8	27 Jun 2008
Red Hat EL 4.0	21 Nov 2008
Red Hat EL 5.0	27 Jun 2008
SLES 8 SP4	27 Jun 2008
SLES 9	27 Jun 2008
SLES10	27 Jun 2008
SLES11	17 May 2008
Debian	19 Oct 2009
Novell OES2	27 Jun 2008
IBM AIX on System p	27 Jun 2008
IBM AIX on System i	27 Jun 2008
HP-UX 11.0	26 Jan 2009
HP-UX 11i v1	26 Jan 2009
HP-UX 11i v2	26 Jan 2009
HP-UX 11i v3	26 Jan 2009
Sun Solaris 8	19 Jan 2009
Sun Solaris 9	19 Jan 2009
Sun Solaris 10	19 Jan 2009
Novell Netware	27 Jun 2008
VMware	21 Nov 2008
Tru64	27 Jun 2008
OpenVMS	24 Mar 2009
IBM N Series Gateway and NetApp	15 Aug 2008
SGI	27 Jun 2008
Z/VSE	22 Aug 2008
Apple Mac OS X	27 Aug 2008
IBM i	20 Nov 2008
VIOS	20 Nov 2008
Citrix Xen Server	15 Oct 2008
Support for BladeServer Configurations	27 Jun 2008
IBM BladeCenter®	27 Jun 2008
HS20 / HS21 / HS22 / HS40 / LS20 / LS21 / LS41 JS20 / JS21 / JS22 / JS12 JS23 / JS43	23 Sep 2008
HP BladeSystem	27 Jun 2008
iSCSI Host Attachment	19 Oct 2009
Controllers	Last Updated
DS3000	03 Feb 2009
DS4000	17 Jan 2009
DS5000	19 Jan 2009
DS6000	27 Jun 2008
DS8000	27 Jun 2008
IBM ESS	27 Jun 2008
XIV	11 Sep 2008
HP	21 Nov 2008
Hitachi Data Systems	15 Jan 2009
EMC	11 Sep 2008
Sun StorEdge	27 Jun 2008
StorageTek	22 Aug 2008
IBM N Series Filer and NetApp FAS	27 Jun 2008
Fujitsu Eternus	01 Sep 2008
Bull Storeway	27 Jun 2008
NEC iStorage	27 Jun 2008
Pillar Data	27 Jun 2008
Texas Memory Systems	29 May 2008
Xiotech	23 Jan 2009
Switches	Last Updated
ISL Blades	27 Jun 2008
BladeCenter Supported Configurations	27 Jun 2008
Brocade	15 Jan 2009
Cisco MDS	22 Jan 2009
CNT	27 Jun 2008
McDATA	22 Jul 2008
Qlogic	27 Jun 2008
Other Hardware	Last Updated
Inter Cluster Fibre Extenders	27 Jun 2008
Inter Cluster SAN Routers	14 Aug 2008
IBM TotalStorage NAS Gateway 500	27 Jun 2008
IBM System Storage™ TS7650G ProtecTIER De-duplication Gateway	09 Oct 2008

Hosts

Windows NT 4 Server

Host Bus Adapter		HBA Driver	HBA Firmware	Platform
IBM	QLogic
FC-2 P/N 19K1246	QLA2310/F QLA2310/FL	IBM driver 8.1.5.62	BIOS 1.35	Intel Based Servers
FC-2 133 P/N 24P0960	QLA2340 QLA2340L		BIOS 1.35
FC2-133 Dual Port P/N 24P8053	QLA2342 QLA2342L

Windows 2000 and Windows 2003 Server (not using MPIO)

Host Bus Adapter		HBA Driver	HBA Firmware	Platform	Notes
IBM	QLogic
N/A	QLA2200F	8.1.5.64	1.76	IA32 based Servers (32 bit)	Windows 2000 System Requirements QLogic Device Drivers Newer than 9.0.2.60 Running on Windows 2000 May Fail to Recover Paths After SVC Node Restarts Windows 2003 System Requirements
FC-2 P/N 19K1246	QLA2310/F QLA2310/FL	(Windows 2000) 9.0.2.60 (See this flash) (Windows 2003) 9.1.4.10 (IA32) (IA64)	BIOS 1.52 (IA32) EFI 1.37 (IA64)	IA32 based Servers (32 bit) IA64 based servers ( 64 bit )
FC-2 133 P/N 24P0960	QLA2340 QLA2340L QLA2342 QLA2342L
FC2-133 Dual Port P/N 24P8053
39M5894	QLA2460	(Windows 2003) 9.1.4.10 (IA32) (IA64)
39M5895	QLA2462
Emulex		FC Port Driver 2.42a0	3.93a0
LP8000
LP9002L LP9002DC

LP9402DC
LP9802 LP9802DC			1.92a1
LP10000 LP10000DC
LP1050 LP1050DC

Windows 2003 Server (Using MPIO)

Host Bus Adapter		HBA Driver	HBA Firmware	Platform	Notes
IBM	QLogic
FC-2 P/N 19K1246	QLA2310/F QLA2310/FL	STOR Miniport 9.1.4.15 9.1.7.16 9.1.7.18 (IA32) (x64)	BIOS 1.52 BIOS 1.54	IA32 based Servers (32 bit) IA32E (AKA EM64T) based Xeon Servers (64 bit) x64 based Opteron Servers (64 bit)	Requires the following fixes: KB883646 KB824354 KB891793 (which are included in SP1) Requires Multipathing Driver SDDDSM (see Recommended Software Levels) Please see the 5.1.0 HAG Errata for recommended settings for QLE2560/QLE2562
FC-2 133 P/N 24P0960	QLA2340 QLA2340L
FC2-133 Dual Port P/N 24P8053	QLA2342 QLA2342L
P/N 39M5894	QLA2460		Mulitflash Image 1.56 (BIOS 1.24) Multiflash Image 1.69 (BIOS 2.02)
P/N 39M5895	QLA2462
39R6525	QLE2460
39R6527	QLE2462
	QLE2560 QLE2562
Emulex	LP9002L LP9002DC	Storport Driver 1.30a9 2.00a12 2.10a4 2.10a7	3.93a0
	LP9402DC
	LP9802 LP9802DC LP1050 LP1050DC		1.92a1 1.92a2
	LP10000 LP10000DC
	LP11000		2.72a2
	LP11002
	LP1150

	LPe11000		2.50a6
	LPe11002
	LPe1150
	LPe12000		1.10a5
	LPe12002
59Y1987 46M6049 59Y1993 46M6050	Brocade 415 Brocade 815 Brocade 425 Brocade 825	1.1.0.x	1.1.0.x

Windows 2008 Server (Using MPIO)

Host Bus Adapter		HBA Driver	HBA Firmware	Platform	Virtualisation	Notes
IBM	QLogic
	QLA2340 QLA2340L QLA2342 QLA2342L	STOR Miniport 9.1.4.15 9.1.7.16 9.1.7.18 9.1.8.17	BIOS 1.52 BIOS 1.54 BIOS 2.10	IA32 based Servers (32 bit) IA32E (AKA EM64T) based Xeon Servers (64 bit) x64 based Opteron Servers (64 bit)	Hyper-V on x64 based systems is supported with the following guest OS Windows 2003 32bit Windows 2003 64bit Windows 2008 32bit Windows 2008 64bit Clustering of guest OS is not supported at this time When using Emulex HBAs with Hyper-V please select the settings mentioned in the Host Attachment Guide.	Please visit the 5.1.x SAN Volume Controller restrictions Document for restrictions when running Hyper-V Please visit the SAN Volume Controller Version 5.1.X Host attachment Guide for configuration details & Guidelines for Hyper-V Please see the 5.1.0 Host Attachment Guide for recommended settings for QLE2560/QLE2562
39M5894	QLA2460		Mulitflash Image 1.56 (BIOS 1.24)
39M5895	QLA2462
39R6525	QLE2460
39R6527	QLE2462
	QLE2560 QLE2562		4.04.00 4.06.04
Emulex	LP9802DC LP1050, LP1050DC LP1050Ex, LP1050ExDC LP10000, LP10000DC LP10000ExDC LP1005DC-CM2	Storport Driver 2.00a12 2.10a4 2.10a7	1.92a1

	LP11000, LP11002 LP1150		2.72a2
	LPe11000, LPe11002 LPe1150		2.50a6
	LPe12000 LPe12002		1.10a5
59Y1987 46M6049 59Y1993 46M6050	Brocade 415 Brocade 815 Brocade 425 Brocade 825	1.1.0.x	1.1.0.x

Red Hat EL Advanced Server 2.1 U7

Host Bus Adapter		HBA Driver	HBA Firmware	Platform	Notes
IBM	QLogic
FC-2 P/N 19K1246	QLA2310/F QLA2310/FL	7.05.00	BIOS 1.52	IA32_Based Servers (32 bit)	Fabric maintenance and CCL restrictions apply, please visit Software Restrictions for further details
FC-2 133 P/N 24P0960	QLA2340 QLA2340L
FC2-133 Dual Port P/N 24P8053	QLA2342 QLA2342L

Red Hat EL Advanced Server 3.0 U8

Host Bus Adapter		HBA Driver	HBA Firmware	Platform	Notes
IBM	QLogic
FC-2 P/N 19K1246	QLA2310/F QLA2310/FL	7.07.05 7.07.06	BIOS 1.52	IA32_Based Servers (32 bit)	Fabric maintenance and CCL restrictions apply, please visit Software Restrictions for further details
FC-2 133 P/N 24P0960	QLA2340 QLA2340L
FC2-133 Dual Port P/N 24P8053	QLA2342 QLA2342L
Emulex		7.3.6	3.93a0
LP9002L LP9002DC
LP9402DC
IBM			3.93a0	IBM System p
FC-6228
FC-6239			1.92a1
FC-5716			1.91a5	IBM System p P5 Only

Red Hat EL Advanced Server 4.0

Host Bus Adapter		HBA Driver	HBA Firmware	Platform	Notes
IBM	QLogic
FC-2 P/N 19K1246	QLA2310/F QLA2310/FL	8.01.06 8.01.06 8.01.07-d4 8.02.08 8.02.09-d0-RHEL4.7-04 (RHEL4.7 Distro) 8.02.14.01 8.02.09.00.04.08-D (RHEL4.8 Distro)	BIOS 1.52	IA32 based Servers (32 bit) IA32E (AKA EM64T) based Xeon Servers (64 bit) x64 based Opteron Servers (64 bit)
FC-2 133 P/N 24P0960	QLA2340 QLA2340L
FC2-133 Dual Port P/N 24P8053	QLA2342 QLA2342L
39M5894	QLA2460		Mulitflash Image 1.56 (BIOS 1.24)		Please see flash below before upgrading your HBA drivers Linux 2.6 Device Driver Issues with Levels Qlogic 8.01.07 or Higher and Emulex 8.16.34 or Higher
39R6525	QLE2460
39M5895	QLA2462
39R6527	QLE2462
	QLE2560 QLE2562		4.04.00
Emulex		8.0.16.27 8.0.16.34 8.0.16.40 8.0.16.44 8.0.16.46	3.93a0	IA32E (AKA EM64T) based Xeon Servers (64 bit) x64 based Opteron Servers (64 bit)
LP9002
LP9802			1.91a5
			1.92a1
LP10000 LP10000DC			2.70a5 2.72a2
LP11000
LP11002
LP115
LPe11000
LPe11002
LPe1150
LPe12002			1.10a5
IBM			1.91a5	IBM System p	Fabric maintenance and CCL restrictions apply, please visit Software Restrictions for further details


FC5716 / FC1977

FC3319 SX/LX FC 3320 SX/LX Ficon Express 4, 10km LX: #3321 Ficon Express 4, SX: #3322 Ficon Express 4, 4km LX: #3324		zfcp		IBM System z	Requires a minimum RHEL 4 kernel level of zLinux RHEL4U4, 2.6.9-42.EL.m3 Supported Machines: System z z800 - IBM 2066 System z z800 - IBM 2086 System z z900 - IBM 2064 System z z990 - IBM 2084 System z z9-109 System z z10 2097-E12 System z z10 2097-E26 System z z10 2097-E40 System z z10 2097-E56 System z z10 2097-E64

Red Hat EL Advanced Server 5

Host Bus Adapter		HBA Driver	HBA Firmware	Platform	Notes
IBM	QLogic	8.01.07 8.01.07-K1 8.01.07-K7 8.02.00-k5-rhel5.2-04 8.02.00.06.05.03-k 8.03.00.10.05.04-k	Mulitflash Image 1.56 (BIOS 1.24)	IA32 based Servers (32 bit) IA32E (AKA EM64T) based Xeon Servers (64 bit) x64 based Opteron Servers (64 bit)
	QLA2340
	QLA2342
39M5894	QLA2460
39M5895	QLA2462
39R6525	QLE2460
39R6527	QLE2462
39M5894	QLA2460		1.62af	Itanium2 ( IA64)
39M5895	QLA2462
	QLE2560 QLE2562		4.04.00
	Emulex	8.1.10.3 8.2.0.22 8.2.0.33 8.2.0.33.3p 8.2.0.48.2p	1.91a5 2.70a5 2.72a2	IA32 based Servers (32 bit) IA32E (AKA EM64T) based Xeon Servers (64 bit) x64 based Opteron Servers (64 bit)
	LP9802 LP10000 LP10000DC
	LP11000 LP11002

	LPe11000 LPe11002
	LP1150


	LP12002		1.10A5
	LP10000 LP10000DC		1.91a5	IBM System p
	LP11000		1.20x8 2.72a2
	LP11002
	LP11000	8.1.10.9	2.70a5 2.72a2	Itanium2 ( IA64)
	LP11002
FC3319 SX/LX FC 3320 SX/LX Ficon Express 4, 10km LX: #3321 Ficon Express 4, SX: #3322 Ficon Express 4, 4km LX: #3324		zfcp		IBM System z	Requires a minimum RHEL 4 kernel level of zLinux RHEL4U4, 2.6.9-42.EL.m3 Supported Machines: System z z800 - IBM 2066 System z z800 - IBM 2086 System z z900 - IBM 2064 System z z990 - IBM 2084 System z z9-109 System z z10 2097-E12 System z z10 2097-E26 System z z10 2097-E40 System z z10 2097-E56 System z z10 2097-E64


59Y1987 46M6049 59Y1993 46M6050	Brocade 415 Brocade 815 Brocade 425 Brocade 825	1.1.0.x	1.1.0.x	IA32EM64T, Opteron, Xeon (64 bit)

SLES 8 United Linux 1.0 SP4

Host Bus Adapter		HBA Driver	HBA Firmware	Platform	Notes
IBM	QLogic
FC-2 P/N 19K1246	QLA2310F QLA2310FL	7.07.05 7.07.06	BIOS 1.52	IA32_Based Servers (32 bit)
FC-2 133 P/N 24P0960	QLA2340 QLA2340L
FC2-133 Dual Port P/N 24P8053	QLA2342 QLA2342L
IBM		7.1.14	3.91X4	IBM System p
FC6228
FC 2319 LX FC 2320 SX		zfcp		IBM System z	Requires a minimum SLES 8 kernel of 2.4.21-295 with fix for IBM bugzilla 16690. Supported Machines: System z z800 - IBM 2066 System z z890 - IBM 2086 System z z900 - IBM 2064 System z z990 - IBM 2084

SLES 9 Novell/SuSE

Host Bus Adapter		HBA Driver	HBA Firmware	Platform	Notes
IBM	QLogic
FC-2 P/N 19K1246	QLA2310F QLA2310FL	8.01.06 8.02.08 8.02.14.01	BIOS 1.52	IA32_Based Servers (32 bit) EM64T, Opteron, Xeon (64 bit)
FC-2 133 P/N 24P0960	QLA2340 QLA2340L			IA32_Based Servers (32 bit) EM64T, Opteron, Xeon ia64 ( Itanium ) (64 bit)
FC2-133 Dual Port P/N 24P8053	QLA2342 QLA2342L
P/N 39M5894	QLA2460		Mulitflash Image 1.56 (BIOS 1.24) BIOS 2.02		Please see flash below before upgrading your HBA drivers Linux 2.6 Device Driver Issues with Levels Qlogic 8.01.07 or Higher and Emulex 8.16.34 or Higher
39R6525	QLE2460


P/N 39M5895	QLA2462
39R6527	QLE2462
	QLE2560 QLE2562		4.04.00
Emulex		8.0.16.27 8.0.16.34 8.0.16.40 8.0.16.44	3.92a1	EM64T, Opteron, Xeon (64 bit)

LP9002
LP9802			1.91a5
			1.92a1
LP10000 LP10000DC			2.72a2
LP11000
LP11002
LP1150
LPe11000
LPe11002
LPe1150
LPe12002			1.10a5
IBM



FC5716 / FC1977			1.91a5	IBM System p
FC 2315 LX / SX FC 2318 LX / SX FC 2319 LX / SX FC 2320 LX / SX FC 3319 LX / SX FC 3320 LX / SX Ficon Express 4, 10km LX: #3321 Ficon Express 4, SX: #3322 Ficon Express 4, 4km LX: #3324		zfcp		IBM System z	Requires a minimum SLES 9 SP3 kernel of 2.6.5-7.243-S390. Supported Machines: System z z800 - IBM 2066 System z z800 - IBM 2086 System z z900 - IBM 2064 System z z990 - IBM 2084 System z z9-109 System z z10 2097-E12 System z z10 2097-E26 System z z10 2097-E40 System z z10 2097-E56 System z z10 2097-E64

SLES 10 Novell/SuSE

Host Bus Adapter		HBA Driver	HBA Firmware	Platform	Notes

Emulex		8.1.6.8		IA32EM64T, Opteron, Xeon (64 bit)	Vdisk expansion & contraction is not supported
LP9802			1.91a5
			1.92a1
LP10000 LP10000DC
LP11002			2.70a5
LPe11000
LPe11002
LP11000		8.1.10.3	2.10 (B2D2.10X5) 2.72a2	IBM System p

LP11002
LPe12002-M8		8.2.0.22	1.10A5 (U3D1.10A5)	Xeon (64 bit)
IBM		8.1.6.8	1.91a5	IBM System p

FC5716
FC1977
FC5758	FC1905		2.10x8
FC5759	FC1910
IBM	QLogic	8.01.06 8.02.00-k6-SLES10-05	Supplied with driver	IA32EM64T, Opteron, Xeon (64 bit)
39M5894	QLA2460
39M5895	QLA2462
QLA2340

QLA2342
	QLE2560 QLE2562

FC 2319 LX FC 2320 SX Ficon Express 4, 10km LX: #3321 Ficon Express 4, SX: #3322 Ficon Express 4, 4km LX: #332		zfcp		IBM System z	System z z800 - IBM 2066 System z z800 - IBM 2086 System z z900 - IBM 2064 System z z990 - IBM 2084 System z z9-109 System z z10 2097-E12 System z z10 2097-E26 System z z10 2097-E40 System z z10 2097-E56 System z z10 2097-E64

59Y1987 46M6049 59Y1993 46M6050	Brocade 415 Brocade 815 Brocade 425 Brocade 825	1.1.0.x	1.1.0.x	IA32EM64T, Opteron, Xeon (64 bit)	Vdisk expansion & contraction is not supported

SLES 11

Host Bus Adapter	HBA Driver	HBA Firmware	Platform	Notes
Emulex
LP10000	8.2.8.14	1.41a2 FV1.90	IBM System p
LP10002		1.41a2 FV1.91a5	IBM System p
LPe12000 LPe12002		FV 2.50a6	x86_64
Emulex 42C2071		FV 2.50a6	x86_64
QLogic
QLA2342	8.02.01.03.11.0-k9	v3.03.27	ia64 ( Itanium )
QLA2460		FW: 4.04.05	ia64 ( Itanium )
QLA2462			x86_64
QLE2562			x86_64

Debian

Host Bus Adapter	HBA Driver	HBA Firmware	Platform	Notes
Emulex
LPe11000	8.2.6	2.50A6	x86_32
QLogic
QLA2460	8.02.01-k4	3.03.21	x86_64

Novell OES2/Xen

Host Bus Adapter	HBA Driver	HBA Firmware	Platform	Notes

Emulex	8.1.10.3	2.50A6 (Z2F2.50A6)	IA32EM64T, Opteron, Xeon (64 bit)	Vdisk expansion & contraction is not supported
LPe11002

IBM AIX on System p

IBM AIX 4.3.3

	Host Bus Adapter	HBA Driver	HBA Firmware	Platform
IBM	FC6227	Driver included in Technology Level. Please see Recommended Software Levels for latest support	3.30X1	IBM System p
IBM	FC6228		3.93a0	IBM System p

IBM AIX 5.1

	Host Bus Adapter	HBA Driver	HBA Firmware	Platform
IBM	FC6227	Driver included in Technology Level. Please see Recommended Software Levels for latest support	3.30X1	IBM System p
	FC6228		3.93a0
	FC6239		1.91X4 1.92a1

IBM AIX 5.2

	Host Bus Adapter	HBA Driver	HBA Firmware	Platform
IBM	FC6227	Driver included in Technology Level. Please see Recommended Software Levels for latest support	3.30X1	IBM System p
	FC6228		3.93a0
	FC6239		1.91X4 1.92a1
	FC5716 / FC1977		1.91A5
	FC5758 / FC1905		2.10X8 2.71X4
	FC5759 / FC1910		2.10X8 2.71X4
	FC5773 / FC5774		2.71a2	P6 Only

IBM AIX 5.3

	Host Bus Adapter	HBA Driver	HBA Firmware	Platform
IBM	FC6227	Driver included in Technology Level. Please see Recommended Software Levels for latest support	3.30X1	IBM System p
	FC6228		3.93a0
	FC6239		1.91X4 1.92a1
	FC5716 / FC1977		1.91A5
	FC5758 / FC1905		2.10X8 2.71X4
	FC5759 / FC1910		2.10X8 2.71X4
	FC5773 / FC5774		2.71a2	P6 Only
	FC5735		1.10x5	P6 Only

IBM AIX 6.1

	Host Bus Adapter	HBA Driver	HBA Firmware	Platform
IBM	FC5716 / FC1977	Driver included in Technology Level. Please see Recommended Software Levels for latest support	1.91A5	IBM System p
	FC5758 / FC1905		2.10X8 2.71X4
	FC5759 / FC1910		2.10X8 2.71X4
	FC5773 / FC5774		2.71a2	P6 Only
	FC5735		1.10x5	P6 Only

IBM AIX on System i

IBM AIX 5L Version 5.2 on System i AIX LPAR

	Host Bus Adapter	HBA Driver	HBA Firmware	Platform
IBM	FC0611	devices.pci.df1000f7.com.5.2.0.95 devices.pci.df1000f9.rte.5.2.0.75 devices.fcp.disk.rte 5.2.0.95 devices.scsi.disk.rte 5.2.0.95	3.91X4	IBM i
	FC0625	devices.pci.df1000f7.com.5.2.0.95 devices.pci.df1080f9.rte.5.2.0.75 devices.fcp.disk.rte 5.2.0.95 devices.scsi.disk.rte 5.2.0.95	1.91X4
	FC0646	devices.pci.df1000f7.com.5.2.0.95 devices.pci.df1000fa.rte.5.2.0.95 devices.fcp.disk.rte 5.2.0.95 devices.scsi.disk.rte 5.2.0.95	1.90X13

IBM AIX 5L Version 5.3 on System i AIX LPAR

	Host Bus Adapter	HBA Driver	HBA Firmware	Platform
IBM	FC0611	devices.pci.df1000f7.com.5.3.0.50 devices.pci.df1000f9.rte.5.3.0.30 devices.fcp.disk.rte 5.3.0.50 devices.scsi.disk.rte 5.3.0.50	3.91X4	IBM i
	FC0625	devices.pci.df1000f7.com.5.3.0.50 devices.pci.df1080f9.rte.5.3.0.30 devices.fcp.disk.rte 5.3.0.50 devices.scsi.disk.rte 5.3.0.50	1.91X4
	FC0646	devices.pci.df1000f7.com.5.3.0.50 devices.pci.df1000fa.rte.5.3.0.50 devices.fcp.disk.rte 5.3.0.50 devices.scsi.disk.rte 5.3.0.50	1.90X13

HP-UX 11.0 for PA-RISC (64-bit only)

Host Bus Adapter	HBA Driver	Platform
A6795A	B.11.00.10	HP 9000 Series Servers (PA-RISC 64-bit only)
A5158A	B.11.00.10	HP 9000 Series Servers (PA-RISC 64-bit only)

HP-UX 11i v1 for PA-RISC (64-bit only)

Host Bus Adapter	HBA Driver	Platform
A5158A	B.11.11.12 B.11.11.0806 B.11.11.0812	HP 9000 Series Servers (PA-RISC 64bit only)
A6795A	B.11.11.12 B.11.11.0806 B.11.11.0812
A6826A	B.11.11.13 B.11.11.16 B.11.11.17
A9782A
A9784A
AB378A
AB379A
AB378B
AB379B
AB465A
AD193A
AD194A

HP-UX 11i v2 (B.11.23) for PA RISC and Itanium

Host Bus Adapter	HBA Driver	Platform
A5158A	B.11.23.0512 B.11.23.0812	HP 9000 Series Servers (PA-RISC 64bit) & HP Itanium Servers
A6795A	B.11.23.0512 B.11.23.0812
A6826A	B.11.23.0802 B.11.23.0803 B.11.23.0806 B.11.23.0903
A9782A
A9784A
AB378A
AB379A
AB378B
AB379B
AB465A
AD193A
AD194A
AD300A		HP Itanium Servers only

HP-UX 11i v3 (B.11.31) for PA RISC and Itanium

Host Bus Adapter	HBA Driver	Platform
A6795A A5158A	FibreChannel-00 B.11.31.0803FibreChannel-00 B.11.31.0809	HP 9000 Series Servers (PA-RISC 64bit) & HP Itanium Servers

AB378A AB378B AB379A AB379B AB465A AD193A AD194A A9782A A9784A A6826A	FibreChannel-00 B.11.31.0803FibreChannel-00 B.11.31.0809


AD300A		HP Itanium Servers Only

SunOS 5.8/Solaris 8 (32 and 64 bit Sparc)

	Host Bus Adapter	HBA Driver	FCode	Multipathing	San Boot	Clustering	Platform	Note
AMCC / JNI	FCE-1473	5.3.1.3	Firmware 3.9.1	SDD 1.6.3.0-1	No	No	Sparc
	FCE-6460
	FCX / FCX2-6562
QLogic (qla driver)	QLA2200	4.15.05	2.00.05
	QLx23xx (2GB) QLx24xx (4GB)	5.03	Supplied with driver
Sun-Badged QLogic (qlc driver) QLogic (qlc driver)	X6799A X6727A SG-XPCIxxx 2GB SG-XPCIxxx 4GB QLx23xx (2GB) QLx24xx (4GB)	Supplied with SAN package which includes the drivers Select StorageTek SAN 4.4.x on this link.	Supplied with SAN package	Veritas DMP 4.1 Veritas DMP 5.0 MP1		SFHA 4.1 (requires latest ASL available from Symantec)
				MPxIO (included in SAN package)		No
Sun	SG-XPCI1FC-JF2	v20040825-1.40 (0)	FCode in Driver Package	SDD 1.6.3.0-1		No
	SG-XPCI2FC-JF2
Emulex (lpfc driver)	LP90xx	6.10g 6.21g	3.93a0	SDD 1.6.3.0-1
	LPx10xx		1.92a1
	LPx11xx		2.70a5 2.72a2
Sun Badged Emulex (emlxs driver) Emulex (emlxs driver)	SG-XPCIxxx (2GB) SG-XPCIxxx (4GB) All Emulex models listed here	Supplied with SAN package which includes the drivers Select StorageTek SAN 4.4.x on this link.	Supplied with SAN package	Veritas DMP 4.1 Veritas DMP 5.0 MP1		SFHA 4.1 (requires latest ASL available from Symantec)
				MPxIO (included in SAN package)		No

SunOS 5.9/Solaris 9 (32 and 64 bit Sparc)

	Host Bus Adapter	HBA Driver	FCode	Multipathing	San Boot	Clustering	Platform	Note
AMCC / JNI	FCE-1473	5.3.1.3	Firmware 3.9.1	SDD 1.6.3.0-1 SDD 1.6.4.0-2 SDD 1.6.5.0-0	No	No	Sparc
	FCE-6460
	FCX / FCX2-6562
QLogic (qla driver)	QLA2200	4.15.05	2.00.05
	QLx23xx (2GB) QLx24xx (4GB)	5.03	Supplied with driver


Sun-Badged QLogic (qlc driver) QLogic (qlc driver)






	X6799A X6727A SG-XPCIxxx 2GB SG-XPCIxxx 4GB QLx23xx (2GB) QLx24xx (4GB)	Supplied with SAN package which includes the drivers Select StorageTek SAN 4.4.x on this link.	Supplied with SAN package	Veritas DMP 4.1 (download latest ASL here)		SFHA 4.1 (requires latest ASL available from Symantec)
				Veritas DMP 5.0 (VxVM 5.0MP1RP3 or later required) (download latest ASL here)		SFHA/SFRAC 5.0 MP1 (requires latest ASL available from Symantec)
				MPxIO Guidance on Configuring Solaris MPXIO for use with SVC Vdisks	Yes	SUN Cluster 3.1 & 3.2 (SVC Supports up to 4-node SUN clusters)
Sun	SG-XPCI1FC-JF2	v20040825-1.40 (0)	FCode in Driver Package	SDD 1.6.3.0-1 SDD 1.6.4.0-2 SDD 1.6.5.0-0	No	No


	SG-XPCI2FC-JF2
Emulex (lpfc driver)	LP90xx	6.10g 6.21g	3.93a0
	LPx10xx		1.91a5 1.92a1
	LPx11xx		2.70a5 2.72a2
Sun Badged Emulex (emlxs driver) Emulex (emlxs driver)	SG-XPCIxxx 2GB SG-XPCIxxx 4GB All Emulex models listed here	Supplied with SAN package which includes the drivers Select StorageTek SAN 4.4.x on this link.	Supplied with SAN package	Veritas DMP 4.1 (download latest ASL here)	No	SFHA 4.1 (requires latest ASL available from Symantec
				Veritas DMP 5.0 (VxVM 5.0MP1RP3 or later required) (download latest ASL here)		SFHA/SFRAC 5.0 MP1
				MPxIO Guidance on Configuring Solaris MPXIO for use with SVC Vdisks	Yes	SUN Cluster 3.1 & 3.2 (SVC Supports up to 4-node SUN clusters)

SunOS 5.10/Solaris 10 (64 bit)

Host Bus Adapter Vendor	Host Bus Adapter	HBA Driver	FCode	Multipathing	San Boot	Clustering	Platform
QLogic (qla driver)	QLA2200	4.15.05	2.00.05	SDD 1.6.3.0-1 SDD 1.6.4.0-2 SDD 1.6.5.0-0	No	No	Sparc
QLogic (qla driver)	QLx23xx (2GB) QLx24xx (4GB) QLx25xx (8GB)	5.01 5.03 5.04	Supplied with driver	SDD 1.6.3.0-1 SDD 1.6.4.0-2 SDD 1.6.5.0-0	No	No	Sparc
Sun-Badged QLogic (qlc driver) Qlogic (qlc driver)	SG-XPCIxxx 2GB SG-XPCIxxx 4GB QLx23xx (2GB) QLx24xx (4GB)	Part of OS	Supplied with SAN package	Veritas DMP 4.1 (download latest ASL here)	SPARC: Yes ( requires kernel patch 118833-36 and qlc driver 119130-33 + 125166-05) x86: No	SFHA 4.1 (requires latest ASL available from Symantec)	Sparc
				5.0 (VxVM 5.0MP1RP3 or later required) (download latest ASL here)		SFHA/SFRAC 5.0 MP1	Sparc & x86
	SG-XPCIxxx 2GB SG-XPCIxxx 4GB QLx23xx (2GB)			MPxIO Guidance on Configuring Solaris MPXIO for use with SVC Vdisks	Yes	SUN Cluster 3.1 SVC Supports up to 4-node SUN clusters	Sparc
	SG-XPCIxxx 2GB SG-XPCIxxx 4GB QLx23xx (2GB) QLx24xx (4GB) QLx25xx (8GB)					SUN Cluster 3.2 SVC Supports up to 4-node SUN clusters
							Sparc & x86
	X6799A X6727A	v20060630-21	2.1.144	SDD 1.6.3.0-1 SDD 1.6.4.0-2 SDD 1.6.5.0-0	No	No	Sparc
				MPxIO		SUN Cluster 3.1 SVC Supports up to 4 nodes per cluster
Emulex (lpfc driver)	LP8000 LP9000 LP9002	6.10g 6.21g	3.93a0	SDD 1.6.3.0-1 SDD 1.6.4.0-2		No


	LPx10xx		1.91a5 1.92a1

	LPx11xx		2.70a5 2.72a2
Sun Badged Emulex (emlxs driver) Emulex (emlxs driver)	SG-XPCIxxx 2GB SG-XPCIxxx 4GB SG-XPCIxxx 8GB All Emulex models listed here	Part of OS	Supplied with SAN package	MPxIO Guidance on Configuring Solaris MPXIO for use with SVC Vdisks	Yes	SUN Cluster 3.1 SVC Supports up to 4-node SUN clusters	Sparc
						SUN Cluster 3.2 SVC Supports up to 4-node SUN clusters	Sparc & x86
				Veritas DMP 4.1 (download latest ASL here)	Yes	SFHA 4.1 (requires latest ASL available from Symantec	Sparc
				Veritas DMP 5.0 (VxVM 5.0MP1RP3 or later required) (download latest ASL here)	Sparc: Yes x86: No	SFHA/SFRAC 5.0 MP1	Sparc & x86
Brocade	815 825	1.1.0.4		MPxIO Guidance on Configuring Solaris MPXIO for use with SVC Vdisks	No	No	Sparc & x86

Novell Netware 6.5

	Host Bus Adapter	HBA Driver	HBA Firmware	Platform
QLogic	QLA2310/F QLA2310/FL	6.90o	BIOS 1.52	IA32_Based Servers (32 bit)
	QLA2340 QLA2340L
	QLA2342 QLA2342L
	QLA2462

VMware

VMware 2.5

	Host Bus Adapter	ESX	Note	Platform
QLogic	QLA2340 QLA2340L	V2.5.3	Guest OS - Windows 2000 and 2003 ( Clustered & Non Clustered) RH2.1, RH3.0, SLES8, SLES9	IA32_Based Servers (32 bit) IBM BladeCenter
	QLA2342 QLA2342L
	QLA2340 QLA2340L	V2.5.2	Guest OS - Windows 2000 and 2003 ( Clustered & Non Clustered) RH2.1, RH3.0, SLES8, SLES9
	QLA2342 QLA2342L
	QLA2340 QLA2340L	V2.1	Guest OS - Novell Netware only Only supported in single path mode, please visit Software Restrictions for further details.
	QLA2342 QLA2342L
Emulex	LP9002	V2.5.3	Guest OS - Windows 2000 and 2003 ( Clustered & Non Clustered) RH2.1, RH3.0, SLES8, SLES9	IA32_Based Servers (32 bit)
	LP9402
	LP9802
	LP10000 LP10000DC		SAN Boot not supported

VMware 3.01

Note
Customers who are running the VMware 3.01 build are required to move to a minimum VMware level of 3.02 for continued support.

VMware 3.02 U1

ESX	Host Bus Adapter Model	Host Bus Adapter Vendor Support	OS	Note	Additional Information
3.02	For Host Bus Adapter model please visit: VI3 I/O Guide	Qlogic & Emulex	Windows 2003 Windows 2000 Server SP4	(Standard, Web, Enterprise Editions, and R2), including Service Packs (SP1 and SP2) as noted in VMware Guest Operating System Guide	Additional information: VI3 I/O Guide Guest O/S Guide Known Issues #302



			Windows 2003 MSCS	MSCS
			Windows NT4 SP6a	As specified in VMware Guest Operating System Guide
			Windows XP Pro SP2	select only the LSI virtual driver when configuring this guest
			Red Hat 2.1 ES/AS/WS Update 6 & 7
			Red Hat 3.0 Update 6,7 & 8
			RHEL4 U3 and U4	With the following fix recommendation: RHEL4 U3, RHEL4 U4, SLES9 SP3, and SLES10 File Systems Might Become Read-Only
			RHEL4 U5	With the following patch: RHEL5 File System Becomes Read-Only select only the LSI virtual driver when configuring this guest
			RHEL5	select only the LSI virtual driver when configuring this guest
			RHEL Desktop 5	select only the LSI virtual driver when configuring this guest
			SLES 8 SP4
			SLES 9 SP 3	Novell bugzilla 243958 – The SLES 9 SP3 mptscsi device driver with IBM's SAN Volume Controller should be fixed with the now available SLES9 kernel-default-2.6.5-7.286.i586.rpm which Novell made available 6/19 ... for more info see http://support.novell.com/techcenter/psdb/91a8c8123bccff3f998907b145c6793f.html With the following fix recommendation: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&externalId=51306
			SLES10 SP1	With the following fix recommendation: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&externalId=51306
			Novell NetWare 6.5

VMware 3.5, 3.51, 3.52 & 3.53 & 3.54

ESX	Host Bus Adapter	OS	Note	Additional information
V3.5	As supported in the VMware I/O compatibility guide	Windows 2003 32 & 64Bit Windows 2000 Server SP4	(Standard, Web, Enterprise Editions, and R2), including Service Packs (SP1 and SP2) as noted in VMware Guest Operating System Guide	Additional information: Guest O/S Guide VI3 SAN Guide SVC support both fixed path and MRU. SVC supports VMware Consolidated Backup (VCB)



		Windows 2000 MSCS	VMWare 3.5 U3 only Windows Clustering support applies to Windows 2000 SP4, Windows 2003 RTM, SP 1, R2 and SP 2. For ESX version requirements for these operating systems in cluster environment, please refer to ESX Server Support. Clustering is supported only with a limited set of HBAs; please refer to the I/O Compatibility Guide for the list of HBAs not supported with Windows Clustering
		Windows 2003 32 & 64Bit MSCS
		Windows 2008 Enterprise SP1
		Windows NT4 SP6a	As specified in VMware Guest Operating System Guide
		Windows XP Pro SP2	select only the LSI virtual driver when configuring this guest
		Windows Vista	select only the LSI virtual driver when configuring this guest
		Red Hat 2.1 ES/AS/WS Update 6 & 7
		Red Hat 3.0 Update 6,7 & 8 32 & 64Bit
		RHEL4 U3 and U4 32 & 64Bit
		RHEL4 U5 32 & 64Bit	With the following patch RHEL5 File System Becomes Read-Only select only the LSI virtual driver when configuring this guest
		RHEL5 32 & 64Bit	select only the LSI virtual driver when configuring this guest
		RHEL Desktop 5 32 & 64Bit	select only the LSI virtual driver when configuring this guest
		SLES 8 SP4
		SLES 9 SP 3 32 & 64Bit	Novell bugzilla 243958 – The SLES 9 SP3 mptscsi device driver with IBM's SAN Volume Controller should be fixed with the now available SLES9 kernel-default-2.6.5-7.286.i586.rpm which Novell made available 6/19 ... for more info see http://support.novell.com/techcenter/psdb/91a8c8123bccff3f998907b145c6793f.html
		SLES10 SP1 32 & 64Bit
		CentOS 5.2
		Novell Netware 6.5
		Solaris 10		Supported with Emulex HBAs and raw disks only.

VMware vSphere 4

ESX	Host Bus Adapter	OS	Note	Additional information
V4.0	As supported in the VMware I/O compatibility guide	Windows 2003 32 & 64Bit Windows 2000 Server SP4	(Standard, Web, Enterprise Editions, and R2), including Service Packs (SP1 and SP2) as noted in VMware Guest Operating System Guide	Please visit the VMWare Hardware compatibility guide



		Windows 2008 Enterprise SP1
		Windows NT4 SP6a	As specified in VMware Guest Operating System Guide
		Windows XP Pro SP2	select only the LSI virtual driver when configuring this guest
		Windows Vista	select only the LSI virtual driver when configuring this guest
		Red Hat 2.1 ES/AS/WS Update 6 & 7
		Red Hat 3.0 Update 6,7 & 8 32 & 64Bit
		RHEL4 U3 and U4 32 & 64Bit
		RHEL4 U5 32 & 64Bit	With the following patch RHEL5 File System Becomes Read-Only select only the LSI virtual driver when configuring this guest
		RHEL5 32 & 64Bit	select only the LSI virtual driver when configuring this guest
		RHEL Desktop 5 32 & 64Bit	select only the LSI virtual driver when configuring this guest
		SLES 8 SP4
		SLES 9 SP 3 32 & 64Bit	Novell bugzilla 243958 – The SLES 9 SP3 mptscsi device driver with IBM's SAN Volume Controller should be fixed with the now available SLES9 kernel-default-2.6.5-7.286.i586.rpm which Novell made available 6/19 ... for more info see http://support.novell.com/techcenter/psdb/91a8c8123bccff3f998907b145c6793f.html
		SLES10 SP1 32 & 64Bit
		CentOS 5.2
		Novell Netware 6.5
		Solaris 10	VMware ESX Server 4.0.0, build 164009 San Boot VMFS Only

Tru64 5.1A / 5.1B-2 PK 4 / 5.1B-3 /5.1B-4

Host Bus Adapter	HBA Firmware	Platform	Notes
KGPSA-DA (FCA2354)	3.92A	AlphaServer	Driver Supplied with Operating System
KGPSA-EA (FCA2384)	1.90A4
FCA2684	1.90A4

OpenVMS

OpenVMS 7.3-2

Host Bus Adapter	HBA Firmware	Platform	Notes
KGPSA-DA (FCA2354)	3.92a2 3.93a0	AlphaServer	Driver Supplied with Operating System
KGPSA-EA (FCA2384)	1.90a4 1.91x6
FCA2684	1.90a4 1.91x6

OpenVMS 8.2 & 8.3

Host Bus Adapter	HBA Firmware	Platform	Notes
KGPSA-CA	3.92a1	AlphaServer & Itanium Integrity Servers	Driver Supplied with Operating System
KGPSA-DA (FCA2354)	3.92a2
KGPSA-EA (FCA2384)	1.90a4
FCA2684	1.90a4
AB378B AB379B	4.03 4.21

IBM N Series Gateway and NetApp

NetApp & IBM N Series Gateways

NetApp & N Series Gateway support is not available with SVC 5.1.x

SGI

Platform	Host Bus Adapter	Firmware	Driver	Notes
Origin	QLA234x	3.3.6	Supplied with OS	IBM System Storage SAN Volume Controller V5.1.x- Host Attachment Guide
Altix	QLA234x	3.3.6	Supplied with OS

Z/VSE

Host Bus Adapter	HBA Driver	HBA Firmware	Platform	Notes
Please use this link for z series support levels			Z/VSE 4.2

Apple Mac OS X Server 10.5.4

Host Bus Adapter	HBA Driver	HBA Firmware	Fcode/BIOS Version	Platform
Atto Celerity	3.2.4 3.27MP	3.2.4 3.27MP	2007_11_13 2008_08_26	Apple Xserve intel-based Server
FC-41ES FC-42ES FC-44ES	3.2.4 3.27MP	3.2.4 3.27MP	2007_11_13 2008_08_26	Apple Xserve intel-based Server
FC-81EN FC-82EN FC-84EN	1.30b		2008_08_26

IBM i

Operating System	Version	Notes
IBM i System with Virtual IO Server (VIOS) 1.5.2.1	IBM i Version 6.1 or later	Attaching IBM i as a client of VIOS with SAN Volume Controller Requires IBM i 6.1 cumPTF C8190610 With MF45473 & MF45668 SVC Vdisk size expansion or shrinking is not supported Please visit the SAN Volume Controller Recommended Software Levels for details of supported levels Please visit the SAN Volume Controller Version 5.1.X Host attachment Guide for configuration details & Guidelines for IBM i Server with VIOS

IBM i System with Virtual IO Server (VIOS) 2.1

Virtual I/O Server ( VIOS )

Operating System	Supported Hardware	Supported Client OS	Notes
Virtual IO Server (VIOS)	Please visit the VIOS Hardware support matrix for supported Server, HBA and driver information	SVC Supports AIX, Linux and i5OS Clients	Please visit the SAN Volume Controller Recommended Software Levels for details of supported levels Please visit the SAN Volume Controller Version 5.1.X Host attachment Guide for configuration details & Guidelines for IBM i Server with VIOS

CITRIX XEN SERVER Enterprise Edition v4.1.0

	Host Bus Adapter	HBA Driver	FCode	Multipathing	Guest Operating Systems Supported	San Boot	Clustering	Notes
QLogic	QLE2462	8.01.7.15	built into Citrix XenServer v4.1.0	Device-Mapper (device-mapper-1.02.20-1.el5) Multipath utility: device-mapper-multipath-0.4.7-12.el5	RHEL5 SLES10 Windows 2003	No	No	Citrix Support Matrix Please see the host attachment Guide for support and configuration details

IBM System Storage™ TS7650G ProtecTIER De-duplication Gateway

IBM System Storage	Operating System	Multipath Driver	SAN Boot Support	Clustering Support	Notes
TS7650G ProtecTIER De-duplication Gateway	ProtecTIER	Native	No	ProtecTIERCluster	IBM System Storage TS7650G ProtecTier De-duplication Gateway Please see the host attachment Guide Errata for support and configuration details

Support for BladeServer Configurations

SVC supports Server Blades that meet all of the following criteria;

1. The Server blade contains Qlogic and Emulex generic chip sets running the IBM or equivalent supported Drivers;

and

2. These generic chip sets and drivers are present in the SVC support matrix for HBAs used in non Blade servers;

and

3. The Server blade is running an OS that is present in the SVC support matrix;

and

4. Either a Fibre Channel pass through module is used in the Blade server chassis to connect the Blades to an external FC network; or
The Fibre Channel switch module used in the Blade server chassis is equivalent (in the sense it runs the same microcode on the same switch hardware base) to a discrete Fibre Channel switch that is already listed in the SVC support matrix.

Examples of specific BladeCentre configurations that IBM includes in SVC interoperability testing currently include:

IBM BladeCenter

HS20 / HS21 / HS22 / HS40 / LS20 / LS21 / LS41

Blade Operating System	HBA	HBA Driver	HBA BIOS	Notes
Windows 2000 (32 bit only)	Qlogic QLA2342	9.0.2.60 (See this flash) (SCSI Miniport)	BIOS 1.52	QLogic Device Drivers Newer than 9.0.2.60 Running on Windows 2000 May Fail to Recover Paths After SVC Node Restarts
Windows 2003 (32 bit only)		9.1.2.14 (SCSI Miniport)
Windows 2003 (32 and 64 bit)		9.1.2.19 9.1.7.16 (IA32) (x64) (STOR Miniport)
	Qlogic QLA2462s QMC2462 QMC2462s QMI2472 QMI2572 QMI3472	9.1.2.19 9.1.7.16 (IA32) (x64) (STOR Miniport)	Mulitflash Image 1.56 (BIOS 1.24)
	IBM 39Y9306 41Y8527 26R0890 26R0884
	IBM 39Y9186 43W6859 46M6065	1.30a9
	Emulex LP1105	1.30a9	2.70a5
Windows 2008 (32 and 64 bit)	Qlogic QLA2462s QMC2462 QMC2462s QMI2472 QMI2572 QMI3472	9.1.2.19 9.1.7.16 (IA32) (x64) (STOR Miniport)	Mulitflash Image 1.56 (BIOS 1.24)
	IBM 39Y9306 41Y8527 26R0890 26R0884
	IBM 39Y9186 43W6859 46M6065	1.30a9
	Emulex LP1105	1.30a9	2.70a5
Red Hat EL Advanced Server 2.1	Qlogic QLA2342	7.05.00	BIOS 1.52	(Do not select 7.xx.xx-fo option for Linux; failover enablement is not required with SDD)
Red Hat EL Advanced Server 3.0	Qlogic QLA2342	7.07.05 7.07.06	BIOS 1.52
	Qlogic QLA2462s QMC2462 QMC2462s QMI2472 QMI2572 QMI3472		Mulitflash Image 1.56 (BIOS 1.24)
	IBM 39Y9306 41Y8527 26R0890 26R0884 46M6065		Mulitflash Image 1.56 (BIOS 1.24)
Red Hat EL Advanced Server 4.0 (32 and 64 bit)	Qlogic QLA2342	8.01.06	BIOS 1.52
	Qlogic QLA2462s QMC2462 QMC2462s QMI2472 QMI2572 QMI3472		Mulitflash Image 1.56 (BIOS 1.24)
	IBM 39Y9306 41Y8527 26R0890 26R0884 46M6065		Mulitflash Image 1.56 (BIOS 1.24)
	IBM 39Y9186 43W6859	8.0.16.27
	Emulex LP1105	8.0.16.27	2.70a5
Red Hat EL Advanced Server 5.0 (32 and 64 bit)	Qlogic QLA2342	8.01.07-k1	BIOS 1.52
	Qlogic QLA2462s QMC2462 QMC2462s QMI2472 QMI2572 QMI3472		Mulitflash Image 1.56 (BIOS 1.24)
	IBM 39Y9306 41Y8527 26R0890 26R0884		Mulitflash Image 1.56 (BIOS 1.24)
	IBM 39Y9186 43W6859 46M6065	8.0.16.27
	Emulex LP1105	8.0.16.27	2.70a5
SLES 8	Qlogic QLA2342	7.07.05 7.07.06	BIOS 1.52
SLES 9 (32 and 64 bit)	Qlogic QLA2342	8.01.06	BIOS 1.52
	Qlogic QLA2462s QMC2462 QMC2462s QMI2472 QMI2572 QMI3472		Mulitflash Image 1.56 (BIOS 1.24)
	IBM 39Y9306 41Y8527 26R0890 26R0884		Mulitflash Image 1.56 (BIOS 1.24)
	IBM 39Y9186 43W6859 46M6065	8.0.16.27
	Emulex LP1105	8.0.16.27	2.70a5
SLES 10 SP1	Qlogic QLA2342	8.01.06	BIOS 1.52
	Qlogic QLA2462s QMC2462 QMC2462s QMI2472 QMI2572 QMI3472		Mulitflash Image 1.56 (BIOS 1.24)
	IBM 39Y9306 41Y8527 26R0890 26R0884		Mulitflash Image 1.56 (BIOS 1.24)
	IBM 39Y9186 43W6859 46M6065	8.0.16.27
	Emulex LP1105		2.70a5
VMware	For HBA Support Please see VMware I/O compatibility guide For BladeCenter supported VMware levels please visit IBM BladeCenter Interoperability Guide For SVC supported OS levels please visit VMware OS Supported Levels

JS20

JS20 (8842) Drivers

Blade Operating System	Kernel & maintenance levels	HBA Driver	Notes
AIX 5.2	Please See recommended Software Levels	As per pSeries Support for AIX	Please refer to the BladeCenter Support Site For Further Information
AIX 5.3		As per pSeries Support for AIX
Red Hat EL Advanced Server 4.0		As Per RHEL4 OS Support	(Do not select 7.xx.xx-fo option for Linux; failover enablement is not required with SDD) Please refer to the BladeCenter Support Site For Further Information
SLES 8		As Per SLES8 OS Support

JS21

Blade Operating System	Kernel & maintenance levels	HBA Driver	Notes
AIX 5.1	Please See recommended Software Levels	As per pSeries Support for AIX	Please refer to the BladeCenter Support Site For Further Information
AIX 5.2
AIX 5.3
SLES8		As Per SLES8 OS Support	(Do not select 7.xx.xx-fo option for Linux; failover enablement is not required with SDD) Please refer to the BladeCenter Support Site For Further Information
SLES9		As Per SLES9 OS Support
SLES10		As Per SLES10 OS Support

JS22

Blade Operating System	Kernel & maintenance levels	HBA	HBA Driver	Notes
AIX 5.3	Please See recommended Software Levels	LP1105-BCv	devices.pci.df1023fd.diag 5.3.7.0 devices.pci.df1023fd.rte 5.3.7.0	Please refer to the BladeCenter Support Site For Further Information
AIX 6.1		LP1105-BCv	devices.pci.df1023fd.diag 6.1.0.0 devices.pci.df1023fd.rte 6.1.0.0
SLES10		QMI3472	8.01.10.9	(Do not select 7.xx.xx-fo option for Linux; failover enablement is not required with SDD) Minimum recommended level SP1 Please refer to the BladeCenter Support Site For Further Information
RHEL4.6	2.6.9-67.EL	QMI3472	8.01.07.15	Please refer to the BladeCenter Support Site For Further Information
RHEL5.1	2.6.18-53.el5	QMI3472	8.01.07.15	Multipath.conf, version 2.01 Please refer to the BladeCenter Support Site For Further Information
AIX 5.3 with VIOS 2.1.1 AIX 6.1 with VIOS 2.1.1		FC 8252		(IBM i and VIOS)
		FC 8248		(VIOS only - no IBM i)
		FC 8251		(VIOS only - no IBM i)

JS12

Blade Operating System	Kernel & maintenance levels	HBA	HBA Driver	Notes
RHEL4.6	2.6.9-67.EL	QMC2462s		Please refer to the BladeCenter Support Site For Further Information
RHEL5.1	2.6.18-53.el5
AIX 5.3	N/A
AIX 6.1	N/A
AIX 5.3 with VIOS 2.1.1 AIX 6.1 with VIOS 2.1.1		FC 8252		(IBM i and VIOS)
		FC 8248		(VIOS only - no IBM i)
		FC 8251		(VIOS only - no IBM i)
SLES 10	Please See recommended Software Levels	QMI2472	8.02.00-k6-SLES10-05	Please see the host attachment Guide Errata for support and configuration details

JS23 / JS43

Blade Operating System	Kernel & maintenance levels	HBA	HBA Driver	Notes
AIX 5.3 with VIOS 2.1.1 AIX 6.1 with VIOS 2.1.1	N/A	FC 8252		(IBM i and VIOS)
		FC 8240
		FC 8241
		FC 8242

HP BladeSystem Support

HP BladeSystem Model	HBA Support	Device Drivers	Supported Operating Systems	Notes
BL30p BL40p BL25p BL35p BL460c BL465c BL480c BL685c	300874-B21 354054-B21 361426-B21 381881-B21 394588-B21 403619-B21	Please Visit the HP Support Website for recommended device driver information	Windows 2000 Server Windows Server 2003 VMware RHEL5	Please Visit the IBM Recommended Software page for Operating System Levels, Kernel Levels and Multipathing Support

iSCSI Host Attachment

Please refer to the following documentation for details on supported operating systems, restrictions and recommendations for iSCSI attachment to SVC:
V5.1.0 - IBM System Storage SAN Volume Controller Recommendations and Restrictions for iSCSI Host Attachment
V5.1.0 - IBM System Storage SAN Volume Controller Guidelines for the attachment of iSCSI Hosts : Errata

Controllers

An SVC configuration must include at least one storage controller which supports SVC quorum disks.
Please refer to the Configuration Guide which details the recommended customer configurable settings that should be applied for each storage controller type.

IBM DS3000

Controller Model	Firmware	NVSRAM	ESM	Supports SVC Quorum Disks	Host Attachment	Notes
DS3400	06.70.22.XX 06.70.24.XX 06.70.69.XX 7.35.41.XX	N1726D340R270V05	0186 or higher	Yes (Also supports Extended Quorum)	FC	Concurrent download of ESM code with I/O is not supported. Do not reboot both controllers simultaneously. SVC Supports SAS and SATA Drive configurations. Single Controller configuration is not supported. RAID-5 Array size must be 4+1 or larger. RAID-6 Array size must be 4+1+1 or larger. Ensure Host type is set to "IBM TS SAN VCE". DS3400 maximum LUNs per partition is currently 32, limiting the number of LUNs from a single DS3400 to a single SVC cluster to 32 Using Native Copy Services with SVC V3.1.0.4 and later

IBM DS4000

Controller Model	Firmware Release	Storage Manager	Supports SVC Quorum Disks	ESM Support	Notes
DS4100	06.12.56.xx	Download the recommended version of the Storage Manager from the DS4000 website	Yes (Also supports Extended Quorum)	Concurrent download of ESM firmware with I/O is not supported	Dynamic expansion of controller LUNs is not supported Please refer the DS4000 website for the latest recommended DS4000 client software and RDAC levels Please refer the DS4000 website for specific configuration guidelines, cabling requirements & restrictions when attaching EXP810 to DS4300 & DS4500 DS4000 copy services (FlashCopy, VolumeCopy, MetroMirror) can be used with SVC. Refer to the following hint & tip for more information: RAID-5 Array size must be 4+1 or larger. RAID-6 Array size must be 4+1+1 or larger. DS4000 range maximum LUNs per partition is currently 256, limiting the number of LUNs from a single DS4000 to a single SVC cluster to 256. Using Native Copy Services with SVC V3.1.0.4 and later * Please see the following DS4K flashes DS4200 DS4700 DS4800 If you have 07.36.08.xx code, you MUST contact DS4000 support prior to upgrading to your DS4000 firmware. The 07.36.08.xx release is no longer supported. 07.36.12.xx is no longer available, please see this flash**.
DS4200	06.23.05.xx 06.60.02.xx 06.60.08.xx 06.60.17.xx 06.60.22.xx ~~07.10.23.xx~~ 07.15.07.xx 07.15.10.xx 07.36.08.xx 07.36.12.xx 07.36.14.xx* 07.36.17.xx 07.50.13.xx
DS4400	06.12.56.xx

DS4300	06.12.56.xx 06.23.05.xx 06.60.02.xx 06.60.08.xx 06.60.17.xx 06.60.22.xx			Concurrent download of ESM firmware with I/O is supported with controller firmware 06.23.05.00 or later . Please visit SAN Volume Controller Restrictions for further details.

DS4300 Turbo	06.12.56.xx 06.23.05.xx 06.60.02.xx 06.60.08.xx 06.60.17.xx 06.60.22.xx
DS4500	06.12.56.xx 06.23.05.xx 06.60.02.xx 06.60.08.xx 06.60.17.xx 06.60.22.xx
DS4700	06.23.05.xx 06.60.02.xx 06.60.08.xx 06.60.17.xx 06.60.22.xx ~~07.10.23.xx~~ 07.15.07.xx 07.15.10.xx 07.36.08.xx 07.36.12.xx 07.36.14.xx* 07.36.17.xx 07.50.13.xx
DS4800	06.23.05.xx 06.60.02.xx 06.60.08.xx 06.60.17.xx 06.60.22.xx ~~07.10.23.xx~~ 07.15.07.xx 07.15.10.xx 07.36.08.xx 07.36.12.xx 07.36.14.xx* 07.36.17.xx 07.50.13.xx

FAStT (The IBM TotalStorage FAStT Family has been renamed the IBM TotalStorage DS4000 Series)

Controller Model	Firmware Release	Storage Manager	Supports SVC Quorum Disks	Notes
FAStT200	05.30.25.xx	Download the recommended version of the Storage Manager from the DS4000 website	Yes	Dynamic expansion of controller LUNs is not supported Concurrent download of ESM firmware with I/O is not supported DS4000 copy services (FlashCopy, VolumeCopy, MetroMirror) can be used with SVC. Refer to the following hint & tip for more information: Using Native Copy Services with SVC V3.1.0.4 and later Please refer the DS4000 website for the latest recommended DS4000 client software and RDAC levels
FAStT500	05.30.25.xx		Yes (Also supports Extended Quorum)

DS4000 (FAStT) Expansion Units

Expansion Units	Notes
Please refer to the DS4000 website for information on supported expansion units for your specific controller type	Please refer to DS4000 documentation on the DS4000 website for specific procedures and limitations

IBM DS5000

Controller Model	Firmware Release	Storage Manager	Supports SVC Quorum Disks	ESM Support	Notes
DS5020	07.60.xx.xx	Download the recommended version of the Storage Manager from the DS5000 website	Yes (Also supports Extended Quorum)	Please refer to DS5000 documentation with regard to ESM Download.	Dynamic expansion of controller LUNs is not supported Please refer the DS5000 website for the latest recommended DS5000 client software and RDAC levels Please refer the DS5000 website for specific configuration guidelines, cabling requirements & restrictions when attaching EXP5000 and EXP810 DS5000 copy services (FlashCopy, VolumeCopy, MetroMirror) can be used with SVC. Refer to the following hint & tip for more information DS5000 range maximum LUNs per partition is currently 256, limiting the number of LUNs from a single DS4000 to a single SVC cluster to 256. RAID-5 Array size must be 4+1 or larger RAID-6 Array size must be 4+1+1 or larger 07.36.12.xx is no longer available, please see the following flash**.
DS5100	07.30.21.xx ** 07.36.12.xx 07.36.14.xx 07.36.17.xx 07.50.12.xx 07.50.13.xx 07.60.xx.xx
DS5300

IBM DS6000

Model	Firmware	Supports SVC Quorum Disks	Notes
DS6800	Minimum DS6800 Licensed Machine Code level: 5.0.0 For further support, including interoperability details, see: http://www-1.ibm.com/servers/storage/support/disk/ds6800/planning.html	Yes (Also supports Extended Quorum)	DS6000 copy services (FlashCopy, MetroMirror) can be used with SVC. Refer to the following hint & tip for more information: Using Native Copy Services with SVC V3.1.0.3 and Prior Using Native Copy Services with SVC V3.1.0.4 and later

IBM DS8000

Model	Firmware	Supports SVC Quorum Disks	Notes
DS8100	Minimum DS8100 Licensed Machine Code level: 5.0.0 For further support, including interoperability details, see: http://www-1.ibm.com/servers/storage/support/disk/ds8100/planning.html	Yes (Also supports Extended Quorum)	DS8000 copy services (FlashCopy, MetroMirror) can be used with SVC. Refer to the following hint & tip for more information: Using Native Copy Services with SVC V3.1.0.3 and Prior Using Native Copy Services with SVC V3.1.0.4 and later
DS8300	Minimum DS8300 Licensed Machine Code level: 5.0.0 For further support, including interoperability details, see: http://www-1.ibm.com/servers/storage/support/disk/ds8300/planning.html	Yes (Also supports Extended Quorum)

IBM ESS

Model	Firmware	Supports SVC Quorum Disks	Notes
2105-E10	*minimum EC 2.3.3.134* minimum EC 2.3.3.178	Yes (Also supports Extended Quorum)	Dynamic expansion of controller LUNs is not supported ESS copy services (FlashCopy, MetroMirror etc.) can be used with SVC. Refer to the following hint & tip for more information: Using Native Copy Services with SVC V3.1.0.3 and Prior Using Native Copy Services with SVC V3.1.0.4 and later
2105-E20
2105-F10
2105-F20
2105-800	*minimum* *EC 2.4.4.70* minimum EC 2.4.4.112
2105-750		Yes

XIV

Model	Firmware	Supports SVC Quorum Disks	Notes
XIV Nextra	9.2.0g		XIV advanced functions ( Native copy services and Thin Provisioning ) are not supported with SVC Do not attempt to create 512 LUNs The current maximum number of LUNS supported is 511 Minimum Supported SVC level 4.3.0.1
IBM XIV Storage System	10.0		XIV advanced functions ( Native copy services and Thin Provisioning ) are not supported with SVC Do not attempt to create 512 LUNs with 10.0 fimware The current maximum number of LUNS supported is 511 Minimum Supported SVC level 4.3.0.1
IBM XIV Storage System	10.0.0a 10.0.1b 10.1.0a		XIV advanced functions ( Native copy services and Thin Provisioning ) are not supported with SVC Minimum Supported SVC level 4.3.0.1

Model	Firmware	AKA	Supports SVC Quorum Disks	Notes
MA 8000	v8.7.F-7 Plus all no-charge upgrades from the vendor	HSG80	Yes (Note: Not recommended if using only one port)	Your HP support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC
EMA 12000
EMA 16000
Model	Firmware	AKA	Supports SVC Quorum Disks	Notes
MSA1000	4.48 5.20		No	Your HP support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC When upgrading from 5.x to 7.x code the SVC level Must be upgraded to a minimum of 4.3.0 prior to the controller upgrade. Please refer to following flash when downgrading from 7.0 to 5.2 Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC
MSA1000	7.0 ( Active/Active ) Minimum Supported SVC Level 4.3.0
MSA1500	5.20
MSA1500	7.0 ( Active/Active ) Minimum Supported SVC Level 4.3.0
MSA2000	J200P39			Minimum SVC level is 4.3.1.7
Model	Firmware	AKA	Supports SVC Quorum Disks	Notes
EVA 3000	VCS 3.110 VCS 4.007 VCS 4.100		Yes	Your HP support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to EVA product documentation for concurrent maintenance procedures Refer to Configuration Guide which details specific requirements for attachment to SVC
EVA 5000	VCS 3.110 VCS 4.007 VCS 4.100		Yes
Model	Firmware	AKA	Supports SVC Quorum Disks	Notes
EVA 4000	XCS 6.100 XCS 6.2		Yes	Your HP support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to EVA product documentation for concurrent maintenance procedures Refer to Configuration Guide which details specific requirements for attachment to SVC
EVA 6000
EVA 8000
EVA 4100	XCS 6.100 XCS 6.110 XCS 6.2			Your HP support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to EVA product documentation for concurrent maintenance procedures Refer to Configuration Guide which details specific requirements for attachment to SVC
EVA 6100
EVA 8100
EVA 4400	09.50.10.00 09.52.20.00
EVA 6400				Minimum SVC Level is 4.3.1.X Dynamic expansion of controller LUNs is not supported EVA Advanced Functions such as Continuous Access are not supported with SVC
EVA 8400
Model	Firmware	AKA	Supports SVC Quorum Disks	Notes
XP48	01-19-99-00/04	HDS 9910	No	Your HP support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported An SVC configuration must include at least one storage controller which supports SVC quorum disks Ensure that you wait until each Volume is formatted before you present it to the SAN Volume Controller. Refer to Configuration Guide which details specific requirements for attachment to SVC XP24000 & 20000 advanced function such as thin provisioning are not supported with SVC
XP512	01-19-99-00/04	HDS 9960
XP128	21-14-34-00/00	HDS 9970V
XP1024	21-14-34-00/00	HDS 9980V
XP10000	50-09-06-00/00 50-09-72-00/00 50-09-85-00/00	HDS NSC55	Quorum disk is not supported on SVC levels lower than 4.3.1 Please see the SVC 5.1.0 Configuration Guide for details of enabling Quorum disk support
XP12000	50-09-06-00/00 50-09-72-00/00 50-09-85-00/00	HDS USP
XP24000	60-02-48-00/12 60-03-05-00/00 60-03-06/00 60-03-27-00/00 60-04-04-00/10 60-04-13-00/00 60-04-01-00/02	HDS USPv
XP20000		HDS USPv m

Hitachi Data Systems

HDS Thunder	Firmware	AKA	Supports SVC Quorum Disks	Notes
9200	055L/F	SANrise 1200	Yes	Your HDS support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC
9520V	065D/B 065F/D 065F/E
Thunder 9530V / 9570V	065D/B 065F/D 065F/E
9580V	165D/B 165F/D 165F/E
9585V	165D/B 165F/D 165F/E
HDS Lightning	Firmware	AKA	Supports SVC Quorum Disks	Notes
9910	01-19-99-00/04	HP XP48 StorEdge 9910	No	Your HDS support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported An SVC configuration must include at least one storage controller which supports SVC quorum disks Refer to Configuration Guide which details specific requirements for attachment to SVC
9960	01-19-99-00/04	HP XP512 StorEdge 9960
9970V	21-14-34-00/00 21-14-46-00/00	HP XP128 StorEdge 9970
9980V	21-14-34-00/00 21-14-46-00/00	HP XP1024 StorEdge 9980
Hitachi	Firmware	AKA	Supports SVC Quorum Disks	Notes
NSC55	50-09-06-00/00 50-09-72-00/00 50-09-75-00/00 50-09-85-00/00		Quorum disk is not supported on SVC levels lower than 4.3.1 Please see the SVC 5.1.0 Configuration Guide for details of enabling Quorum disk support	Your HDS support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported An SVC configuration must include at least one storage controller which supports SVC quorum disks Refer to Configuration Guide which details specific requirements for attachment to SVC Ensure that you wait until each Volume is formatted before you present it to the SAN Volume Controller. USPv & USPv m advanced function such as thin provisioning are not supported with SVC
USP100
USP600
USP1100
USPv	60-03-06/00 60-04-01-00/02	XP24000
USPv m	60-03-06/00 60-04-01-00/02	XP20000
AMS & WMS	Firmware	AKA	Supports SVC Quorum Disks	Notes
AMS200 AMS500 AMS1000 WMS100	0770/G-M 0781/A-x 0782/B-x	N/A	Yes	Your HDS support representative will perform hardware maintenance and firmware upgrade procedures. Although these operations are nondisruptive to SVC firmware upgrades should be performed with low levels of host I/O or when host I/O has been quiesced Dynamic expansion of controller LUNs is not supported HDS Advanced Function such as Thin Provisioning are not supported with SVC at this time Refer to Configuration Guide which details specific requirements for attachment to SVC


AMS2100 AMS2300 AMS2500	0860/c 0872/e

EMC

EMC Clariion	Firmware	Supports SVC Quorum Disks	Notes
CX 200	02.19.200.5.xxx	Yes	Your EMC support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC
CX 400	02.19.400.5.xxx
CX 600	02.19.600.5.xxx
CX 300	02.19.300.5.xxx 02.26.300.5.xxx
CX 500	02.19.500.5.xxx 02.26.500.5.xxx
CX 700	02.19.700.5.xxx 02.26.700.5.xxx
CX3-10	03.26.010.5.xxx		Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC
CX3-20	03.26.020.5.xxx
CX3-40	03.26.040.5.xxx
CX3-80	03.26.080.5.xxx		Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC
CX4-120	04.28.000.5.xxx 04.28.000.5.504		We recommend the customers who are running Raid 6 to upgrade to the latest supported firmware. Advanced Functions such as thin provisioning are not supported with SVC Dynamic expansion of controller LUNs is not supported CX4 Arrays are only supported with SVC code level 4.3.1 and above
CX4-240
CX4-480
CX4-960
FC4700	08.51.60		Your EMC support representative will perform hardware maintenance and firmware upgrade procedures. Concurrent hardware maintenance operations are non-disruptive to SVC. This product requires I/O to be quiesced during firmware upgrade Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC
EMC Symmetrix		Supports SVC Quorum Disks	Notes
8000 Series (8130, 8230, 8430, 8530, 8730, 8830)	Enginuity 5568	Yes	If you have DMX attached to SVC, please see the following flash: Invalid Configurations on EMC Symmetrix Your EMC support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Symmetrix copy services (SRDF etc.) can be used with SVC. Refer to the following hint & tip for more information: Using Native Copy Services with SVC V3.1.0.3 and Prior Using Native Copy Services with SVC V3.1.0.4 and Later Data Encryption functionality is not supported with SVC. Refer to Configuration Guide which details specific requirements for attachment to SVC
DMX & DMX-2 800/1000/2000/3000	Enginuity 5671	Yes
DMX-3	Enginuity 5772 Enginuity 5773	Yes
DMX-4	Enginuity 5772 Enginuity 5773	Yes

Sun StorEdge

StorEdge	Firmware	AKA	Supports SVC Quorum Disks	Notes
9910	01-19-99-00/04	HDS 9910		Your Sun support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported An SVC configuration must include at least one storage controller which supports SVC quorum disks Refer to Configuration Guide which details specific requirements for attachment to SVC
9960	01-19-99-00/04	HDS 9960
9970	21-14-34-00/00	HDS 9970V
9980	21-14-34-00/00	HDS 9980V
9990	50-09-06-00/00

StorageTek

StorageTek D-Series

Model	Firmware	NVSRAM	SANTricity	Supports SVC Quorum Disks	Notes
D173	5.30.23.00	N2772-530855-006	8.30.G2.05	Yes
D178	5.39.01.00 5.40.19.00 6.10.15.00 6.12.10.00	N4884-530855-005 N4884-540855-005 N4884-610855-006 N4884-612855-003	8.30.G2.00 8.40.G2.08 9.10.G2.03 9.15.G2.01
D220	5.34.08.00	N2882-534855-003	8.34.G2.05
D240	5.40.19.00 6.10.15.00 6.12.10.00	N2882-540855-007 N288X-610855-006 N288X-612855-003	8.40.G2.08 9.10.G2.03 9.15.G2.01		AKA FlexLine 240
D280	5.30.23.00 5.40.19.00 6.10.15.00 6.12.10.00	N5884-530855-005 N5884-540855-005 N588X-610855-006 N588X-612855-003	8.30.G2.05 8.40.G2.08 9.10.G2.03 9.15.G2.01		AKA FlexLine 280
D380	6.15.12.00	N6091-614855-004	9.15.G2.01		AKA FlexLine 380

StorageTek FlexLine 200 Series

Model	Firmware	NVSRAM	SANTricity	Supports SVC Quorum Disks	Notes
FLX210	6.12.10.00	N282X-612855-003	9.12.G2.01	Yes
FLX240	6.12.10.00	N288X-612855-003			AKA D240
FLX280	6.12.10.00	N588X-612855-003			AKA D280
FLX380	6.15.12.00	N6091-614855-004	9.15.G2.01		AKA D380

StorageTek 6000 Series

Model	Firmware	Supports SVC Quorum Disks	Notes
6540	06.16.81.10		Your Sun support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported An SVC configuration must include at least one storage controller which supports SVC quorum disks Refer to Configuration Guide which details specific requirements for attachment to SVC
6130
6140

IBM N Series Filer and NetApp FAS

IBM N Series	NetApp	Firmware	Supports SVC Quorum Disks	Notes
N/A	920	DataONTAP 7.2.4	Yes	Your IBM or NetApp support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC Note: host type should be set to Linux
	940
	960
	980
N3300 2859-A20	FAS2020A	DataONTAP 7.2.4 DataONTAP 7.3 DataONTAP 7.3.1
N3600 2862-A20	FAS2050A
N3700 2863-A10 2863-A20	270



N5200 2864-A10 2864-A20	3020
N5300 2869-A10 2869-A20	3040
N5500 2865-A10 2865-A20	3050
N5600 2868-A10 2868-A20	3070
N6040 2858-A10 2858-A20	3140
N6060 2858-A12 2858-A22	3160
N6070 2858-A11 2858-A21	3170
N7600 2866-A10 2866-A20	6030
N7700 2866-A11 2866-A21	6040
N7800 2867-A10 2867-A20	6070
N7900 2867-A11 2867-A21	6080

Fujitsu Eternus

Type	Model	Firmware	Supports SVC Quorum Disks	Notes
3000	100	V20L86 V20L91	Yes	Refer to Configuration Guide which details specific requirements for attachment to SVC Dynamic expansion of controller LUNs is not supported
	100D	V30L21 V30L27
	200	V20L86 V20L91
	400
	600
	300	V20L56 V10L61
	500
	700
	300B	V20L56 V20L61
	500B
	700B
4000	100	V30L21 V30L27
	300	V10L70 V11L33
	400
	500
	600
8000	900
	1100
	1200
	2100
	2200

Bull Storeway

Model	Firmware	Supports SVC Quorum Disks	Notes
FDA1500	436	Yes	Refer to Configuration Guide which details specific requirements for attachment to SVC
FDA2500	436
FDA2900	435

NEC iStorage

Model	Firmware	Supports SVC Quorum Disks	Notes
S1500	436	Yes	Refer to Configuration Guide which details specific requirements for attachment to SVC
S2500	436
S2900	435

Pillar Data

Model	Firmware	Supports SVC Quorum Disks	Notes
Axiom 300	1.6.6	Yes	Refer to Configuration Guide which details specific requirements for attachment to SVC
Axiom 500	2.8.6
Axiom 600	03.03.07

Texas Memory Systems

Model	Firmware	Supports SVC Quorum Disks	Notes
RamSan 500	3.4.3	Yes	Refer to Configuration Guide which details specific requirements for attachment to SVC Requires minimum SVC level V4.3.1.7

Xiotech

Model	Firmware	Supports SVC Quorum Disks	Notes
Emprise 5000	1.2.C3.4	Yes	Please visit the IBM SVC InfoCenter for details on configuring and using the Emprise 5000 with SVC Requires Minimum SVC Level 4.3.1.3

Switches

SVC supports NPIV products in the SAN with the restriction that these products can only be used for host attachment. An example of an NPIV product is the Brocade Access Gateway module for the BladeCenter.
FCIP technology listed on the IBM SAN Support pages can be used in SVC configurations for the following uses:
1) iSCSI host attachment. Please refer to the iSCSI Host Attachment section for more information.
2) Links between two SVC clusters in a Metro Mirror or Global Mirror configuration. Please refer to the Configuration Guide for details

ISL Blades

All blades comprising of ISWL ports are supported in SVC
configurations, provided that they are listed on the IBM SAN Support pages. This includes the Cisco MDS 9000 Family 4-port 10Gbps Fibre Channel Switching Module and the Brocade 10Gbps Fibre Channel blade.

IBM BladeCenter Supported Configurations

For BladeCenter switch module, Passthrough module, switch vendor interconnectivity and supported firmware levels, please visit the IBM BladeCenter support website

Brocade

IBM Model	Firmware	Class	AKA	Notes
2005-B16	5.3.0d 5.3.1a 6.0.0c 6.1.0a 6.1.0b 6.1.0c 6.1.0d 6.1.0e 6.1.0f 6.1.0g 6.1.0h 6.1.1a 6.1.1b 6.1.1c 6.1.2 6.2.0c 6.2.0e 6.2.0f 6.2.0g 6.2.1b	Fabric Switch	SAN16B-2 Silkworm 200E EMC DS-16B2
2109-M48	5.3.1a 6.0.0c 6.1.0a 6.1.0b 6.1.0c 6.1.0d 6.1.0e 6.1.0f 6.1.0g 6.1.0h 6.1.1a 6.1.1b 6.1.1c 6.1.2 6.2.0c 6.2.0e 6.2.0f 6.2.0g 6.2.1b	Director	SAN256B Silkworm 48000
2005-H08 / H16	5.3.0d 5.3.1a 5.3.1b 5.3.2	Fabric Switch	SAN Switch H08 / 16 Silkworm 3250 / 3850
2005-B32	5.3.1a 6.0.0c 6.1.0a 6.1.0b 6.1.0c 6.1.0d 6.1.0e 6.1.0f 6.1.0g 6.1.0h 6.1.1a 6.1.1b 6.1.1c 6.1.2 6.2.0c 6.2.0e 6.2.0f 6.2.0g 6.2.1b	Fabric Switch	SAN32B-2 Silkworm 4100
2005-B64		Fabric Switch	SAN64B-2 Silkworm 4900
2109-F32	5.3.0d 5.3.1a 5.3.1b 5.3.2	Fabric Switch	SAN Switch F32 Silkworm 3900 EMC DS-32B2
2109-M14	5.3.0d 5.3.1a 5.3.1b 5.3.2	Director	SAN Switch M14 Silkworm 24000
2109-M12	5.0.5e 5.0.5f	Director	SAN Switch M12 Silkworm 12000
3534-F08 / 2109-F08	3.2.1c	Fabric Switch	Silkworm 3200
2109-F16	3.2.1c	Fabric Switch	SAN Switch F16 Silkworm 3800
2109-S08 / S16	2.6.2d	Fabric Switch	SAN Switch S08 / S16 Silkworm 2400 / 2800
2005-B5K	5.2.1_NI1 5.3.1a 6.0.0c 6.1.0a 6.1.0b 6.1.0c 6.1.0d 6.1.0e 6.1.0f 6.1.0g 6.1.0h 6.1.1a 6.1.1b 6.1.1c 6.1.2 6.2.0c 6.2.0e 6.2.0f 6.2.0g 6.2.1b	Fabric Switch	Silkworm 5000 SAN32B-3 20055KB
2499-384 2499-192	5.3.1a 6.0.0c 6.1.0a 6.1.0b 6.1.0c 6.1.0d 6.1.0e 6.1.0f 6.1.0g 6.1.0h 6.1.1a 6.1.1b 6.1.1c 6.1.2 6.2.0c 6.2.0e 6.2.0f 6.2.0g 6.2.1b	Director	Brocade DCX SAN768B
2498-B24	6.1.0g 6.1.1a 6.1.0a 6.1.0b 6.1.0c 6.1.0d 6.1.0e 6.1.0f 6.1.0g 6.1.0h 6.1.1a 6.1.1b 6.1.1c 6.1.2 6.2.0c 6.2.0e 6.2.0f 6.2.0g 6.2.1b	Fabric Switch	Brocade 300
2498-B40			Brocade 5100
2498-B80			Brocade 5300

Cisco MDS

Model	Firmware	Class	AKA	Notes
9506	3.1(3a) 3.2(2c) 3.2(3a) 3.3(1a) 3.3(1c) 3.3.2 4.1(1c) 4.1(3a)	Director	2062-D04
9509			2062-D07
9513			2062-E11
9216		Fabric Switch	2062-D1A / D1H
9140			2061-040
9120			2061-020
9124			2053-424
9134
9222i
9020	2.1(2)		2061-420

CNT

FC/9000 Model	Firmware	Class	AKA	Notes
2042-001 / 128 (FCM)	3.0.5	Director, 1G		Asynchronous replication capabilities for SAN Volume Controller are available from CNT. For more information, please refer to this website: www.cnt.com/products/extension/ura
2042-001 / 128 / 256 (FCM-E)	5.0.4	Director, 2G

McDATA

IBM Name for IBM Badged Switch	McDATA Model	Firmware	Class	AKA			Notes
IBM Name for IBM Badged Switch	McDATA Model	Firmware	Class	IBM# for IBM Badged Switch	IBM# for McDATA Badged Switch	Other	Notes
	ES-3016	EOSc 09.06.02 09.07.01 09.07.02 09.08.01 09.09.00 09.09.02 09.09.03 09.09.05	Sphereon Fabric Switch		2031-016
	ES-3032		Sphereon Fabric Switch		2031-032	EMC DS-32M2
	ES-3216		Sphereon Fabric Switch		2031-216
IBM SAN32M-1	ES-3232		Sphereon Fabric Switch	2027-232	2031-232
IBM SAN24M-1	ES-4500		Sphereon Fabric Switch	2026-224	2031-224
IBM SAN16M-2	ES-4400		Sphereon Fabric Switch	2026-416
IBM SAN32M-2	ES-4700		Sphereon Fabric Switch	2026-432
	ED-6064		Intrepid Director		2032-064	EMC ED-64M
IBM SAN140M-1	ED-6140		Intrepid Director	2027-140	2032-140	EMC ED-140M	UPM and QPM Supported
IBM SAN256M	ED-10000	EOSn 09.06.01 09.06.02 09.06.03 09.07.01 09.07.02 09.08.01 09.09.00 09.09.02 09.09.03 09.09.05	Intrepid Director	2027-256			2GB & 4GB LIMs

Qlogic

Model	Firmware	Class	AKA	Notes
5600	V6.8.0.03	Fabric Switch		Max 64 hosts per I/O Group 128 host N port logins per IO group (64 per node port)
5602
9000	V6.6.0.15 V6.8.0.03

Other Hardware

Technologies for extending the distance between two SVC clusters can be broadly divided into the following two categories. These extenders are only supported as inter cluster links and not intra cluster links, i.e. they should not be used between SVC nodes that are part of the same cluster.

Inter Cluster Fibre Channel Extenders

Fibre channel extenders simply extend a fibre channel link by transmitting fibre channel packets across long links without changing the contents of those packets. IBM has tested a number of such fibre channel extender technologies with SVC and will support fibre channel extenders of all types provided that they are planned, installed and operated as described in the Configuration Guide document.

Inter Cluster SAN Routers

SAN routers extend the scope of a SAN by providing "virtual nPorts" on two or more SANs. The router arranges that traffic at one virtual nPort is propagated to the other virtual nPort but the two fibre channel fabrics are independent of one another. Thus nPorts on each of the fabrics cannot directly log into each other.

Due to the more complex interactions involved, IBM explicitly tests products of this class for interoperability with SAN Volume Controller.

The following SAN Routers are supported for use with SVC when planned, installed and operated as described in the Configuration Guide document.

Inter Cluster SAN Routers		Firmware	AKA	Notes
Inter Cluster SAN Routers		Firmware	IBM# for IBM Badged Switch	Notes
SAN04M-R SAN Router	McDATA Eclipse 1620 SAN Router	EOSi 4.07.00 5.01.00	2027-R04	The Advanced Functions Router pairs for HA Configurations & iFCP Fast Failover in EOSi 5.01.00 are not supported at this time
SAN16M-R SAN Router	McDATA Eclipse 2640 SAN Router	EOSi 4.07.00 5.01.00	2027-R16
SAN16B-R SAN Router	Brocade AP7420 SAN Router	7.4.1d	2109-A16
SAN18B-R	Silkworm 7500	5.3.0d 6.1.0c	2005-R18
SAN04B-R	Silkworm 7500E	6.1.0a 6.1.0c	2005-R04
M48 FC3450 Blade	Silkworm 48000 director blade FR4-18i	6.2.0c 6.2.0e 6.2.0f 6.2.0g 6.2.1b	N/A
Cisco MDS 9000 Series Inter VSAN Routing		3.1(3a) 3.2(2c) 3.2(3a)

IBM TotalStorage NAS Gateway 500

TotalStorage NAS Gateway 500	NAS System Software	Type	Model
IBM	NAS v1.1.1	5198	001

IBM, the IBM logo and ibm.com are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.

Document information


Product categories:

	Hardware

	Computer Storage

	Storage Virtualization

	SAN Volume Controller

	IBM TotalStorage SAN Volume Controller Storage Engine

	V5.1.x


Operating system(s):
	SAN Volume Controller

Version:
	V5.1.x

Software edition:
	N/A

Reference #:
	S1003553

IBM Group:
	Storage Systems Group

Modified date:
	2009-11-07

Translate My Page

Rate this page

Help us improve this page. Your response will be used to improve our document content. Requests for assistance, if applicable, should be submitted through your normal support channel as we cannot respond from this site.