Provides two new approaches for the end to end composite process: The grid composite and the solid composite
These new approaches offer better optimization in the composite design steps and better mating with structural parts in turbine wing design for the aerospace and energy industries.
Improves the end-to-end electrical process with more knowledge capture and reuse for electrical design
The user may define knowledge user parameters on internal harness coverings and copy data from a catalog definition to a harness design. A knowledgeware check allows the user to validate the 3D harness segment diameters versus the harness segment diameters computed from wires. The user may also synchronize equipment reference designator attributes between electrical and tubing definitions using knowledge.
Provides more productivity in wire and harness design 1 flattening
V5.19 provides more efficient harness flattening with the ability to maintain bundle tangency from a 3D harness design. It allows the use of XML electrical files in a local repository when using ENOVIA VPM V5. Arranging segments in a support is improved to ensure wire routing and to increase accuracy of complex connector assemblies (shell and connector).
Improves V4 to V5 electrical harness data migration
V4 to V5 migration brings numerous benefits in this release, such as the migration of V4 protection as V5 light protection. The user is able to use the enhanced V5 internal protection if he or she migrates electrical data containing protections from V4 to V5. This enhanced migration offers improved consistency of V4 and V5 bundle segment shape and length.
Brings a new EndCut command for structure design
The user may:
- Create, edit, and delete end cuts, and the end cut for a beam is integrated in the piece part engine
- Translate a Structure Functional Design 2 (SFD) or Ship Structure Detail Design 2 (SDD) feature during the explode mode through piece part process
- Define end cut graphic replacement in drafting
- Manage different graphic replacements for beam pillars
Enhances technological results usage in tooling design
The mold to cam function is enhanced to permit the creation of a technological results report. Reporting of die/mold technological results is accessible via the new command Display Technological Results (available with Prismatic Machining Preparation Assistant 2 (MPA) license). Any user of the Tooling Design 1 product who has an MPA license can benefit from this enhanced reporting command:
- Create a report (*.csv) on the technological results existing in a given die
- Define some in house processes between the design and the manufacturing stage that provide the user with a powerful tool to control the integrity of the die design and prevents costly iterations between design and manufacturing
Increases design productivity in sheet metal design
The powerful extrusion explode improvement offers an explode mode, which allows the user to generate an associative wall on edge. Creating an extrusion becomes an accelerator of the design and exploding the extrusion allows user to locally modify design while maintaining associations.
Ensures new improvements in the machining simulation domain:
- Capability to support milling machines with interchangeable heads. This enhancement allows the user to simulate milling machines with interchangeable heads, thus enabling the user to verify numerical control (NC) tool paths for travel limits and collisions and modify if necessary.
- Machine configuration management within an operation. The new options in the existing tool path modify dialog and the tool path trace allow the user to:
- Force the selection of a particular machine configuration during machine simulation
- Associate and persist a machine configuration along with a particular tool path point from within the tool path modify dialog
- Apply this machine configuration during machine simulation when the particular tool path point is to be reached
Ensures the design of complex machine parts with easy-to-use multi-axis machining operations
V5.19 provides a new multi pocket flank contouring operation, which supports multiple tool axes for point-to-point operation. The tool axis may be driven by an auxiliary surface (sweeping, contour driven, iso-parametric, and curve following) through the 5x operation.
Reduces programming machining time
To get accurate information, the user can display the in-process stock on each milling or turning operation. The tool path replay includes the capability to check collisions with parts and fixtures defined in the part operation. During a contour driven operation, an extra guide may be defined in several ways:
- By 2 points
- By a point and direction
- By an automatic guide contour computed to enable contact points on a guide curve
Multiple radial passes may be operated for thread and circular milling operations.
Enlarges and optimizes machining process and technology
V5.19 introduces new operations for NC machines. A new mode, by offset on contour, is included for plunge milling, the clearance management is federated, and tool path cornerization is available. In milling and turning, the user has the ability to manage the C-axis on a turret, and it is now possible to conduct process machining on the main spindle and the counter spindle part with the same tool. Also, the user may invert the tool orientation (0-180 degrees). Both a conical tool and a user profile tool are supported in IPM generation for profile contouring in DPM machining.
Increases sales through on the plant, architecture, and construction industries thanks to new capabilities in terrain modeling
These powerful improvements include the ability to:
- Work with meshed surfaces and volumes including tessellation and multi-slice commands
- Edit the meshes easily
- Create and manage Z-Level curves
- Benefit from dedicated improvements to the building implantation and enhancements to the graphic performances
Provides the intersection edge fillet command to improve update stability during design changes
The new intersection edge fillet command increases the part design user's daily productivity by making it possible for the user to:
- Create fillets with the appropriate definitions, including definitions by the intersection of several features and beyond the intersection of faces
- Rely on improved update stability during design changes
- Capture and reuse part design features easily
The user can define a power copy that includes a set of features and a fillet defined at the feature intersection level. When this power copy feature is re-instantiated in another context, the fillet is correctly updated since it does not depend on the intersection of the selected faces but instead on the intersection of the features.
Improves productivity by providing easier definition and better stability of the blend corner capability
This improvement extends the use of the blend corner capability for fillet definition (removing small edges selection) and prevents the redefinition of former blend corners when modifying an edge fillet. The user interface for creation by selection of edges or vertices, edition of the value, and remove is enhanced to improve productivity.
Allows the user to define the gage taper hole main diameter using the selected face as the reference
The user interface of the gage taper hole is improved to provide a new computation mode that enables the user to compute the tapered hole using the selected face as the reference for the main diameter.
Improves and accelerates the part and tooling design review process for manufacturability with wall thickness analysis for the Cast & Forged Optimizer (CFO) product
V5.19 delivers Cast & Forged Optimizer (CFO) add-ons with CFO wall thickness analysis. This new capability
- Improves and accelerates the part and tooling design review process for manufacturability in both casting and forging processes and injection molding processes for plastic part design
- Allows the user to analyze the part thickness either by projecting a ray from the selected point inside the part and normally to its surface, or by rolling a sphere of a maximum diameter inside the part
- Allows detailed and accurate analysis and provides quick identification of critical thin or thick areas using a dynamic sectioning view and a transparent mode display
Ensures automatic filleting in shape design
Automatic filleting provides a significant process improvement, especially for the design of plastic and molded parts. Previously, the process of filleting sharp edges to conform to existing features was a repetitive and very time-consuming phase of the shape design process. This new capability is particularly helpful for fillet manufacturing preparation because it can automatically fillet the sharp edges of a shape in a single operation.
Permits fast surface creation from curves in the Imagine and Shape product
Two new primitive commands are added to provide an intuitive and productive interface with no additional geometry creation. The extruded profile command enables the user to draw directly the profile from the extrude command. Profile modification can be accomplished dynamically within the extrude command, and a command is provided to revolve the profile around an axis definition.
Improves 3DXML export with shader support
Full compatibility with CgFX is provided for shadows. More materials are added to the materials library, such as CarPaint and external shaders that can be imported to add even more effects.
Improves 3D annotations review using 3D XML
The functional tolerancing and annotation (FT&A) features defined in CATProduct and in CATProcess documents can be saved in .3dxml documents as well as .CATPart annotations. This allows the user to review them either using the DMU Dimensioning & Tolerancing Review product or the 3D Live FT&A review product.
Supports new CAD formats
New multiCAD formats are supported, including SW2007, SW2008, SolidEdge V20, and Parasolid V18.
Provides CATIA application infrastructures with large scale management capabilities to design large scale objects
After addressing the small scale management needs of the micro-electro-mechanical systems industry in V5.18, CATIA V5.19 delivers large scale management (from 0.1 mm up to 10 kms) capabilities using mechanical infrastructure. This infrastructure enables the user to design large scale 3D objects, such as dams, and to benefit from complete integration in the Generative Drafting and 2D Layout products.
Delivers advanced effects in rendering including soft shadows from multiple light sources
Shadows are made more realistic with the addition of multiple light sources. The user has the ability to compute and store light maps off-line and then load them so that a scene can be rendered in real time without waiting on calculations to be completed.
Ensures alignment to the latest PROStep/PDES.inc recommended practices for the control of STEP transfers
New STEP validation properties are taken into account for assemblies, allowing the user to check assemblies conversion even when geometry is not exchanged, as in the case of nested assemblies.
