IBM 
p5 595 delivers 16-way to
64-way POWER5 processing to high-end servers
IBM United States
Hardware Announcement 104-380
October 15, 2004
 ENUS104-380.PDF (137KB)
|
At a glance
 |
| At a glance |
 |
IBM eServer p5 595 offers:
- Rack-mount design with up to four 16-way IBM POWER5 processor books
- Standard and turbo processors in 16-, 32-, 48-, and 64-way configurations
- Up to 2,048 GB of DDR1 memory or 256 GB of DDR2 memory
- Up to 14,092.8 GB of internal disk storage
- Up to 192 hot-swap disk bays and 240 hot-swap PCI-X slots
- Redundant power subsystem
- Dynamic LPAR and CoD
- Advanced POWER Virtualization technologies
For ordering, contact:
Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at
800-IBM-CALL
(Reference: RE001).
Back to top
|
|
| Overview |
|
The IBM eServer® p5 595 (9119-595) provides an expandable, high-end enterprise solution for managing the computing requirements needed to become an on demand business.
The p5-595 is configured as a 42U-tall, 24-inch rack. It is available in 16-, 32-, 48-, and 64-way configurations. It provides memory expansion capability up to 2 TB.
The symmetric multiprocessor (SMP) server can be configured with from one to four standard or turbo 16-way processor books. Each 16-way book contains two 8-way multi-chip modules (MCMs) that use state-of-the-art, 64-bit, copper-based, IBM POWER5™ technology microprocessors. Each pair of processors within an MCM is supported by 1.9 MB of Level 2 cache and 36 MB of Level 3 cache. Each 16-way processor book also includes 16 slots for memory cards and six Remote I/O-2 attachment cards for connection of the system I/O drawers.
Up to 12 I/O drawers can be configured on a p5-595 server. Each I/O drawer contains twenty 3.3-volt PCI-X adapter slots and up to sixteen disk bays. Fully configured, the p5-595 can support 240 PCI adapters and 192 disks at 15,000 rpm.
Other features include:
- Integrated service processor
- Integrated redundant power subsystem
- Two integrated Ultra3 dual SCSI controllers per I/O drawer
- Battery backup option
- Powered and nonpowered Expansion Rack options
- Dynamic logical partitioning (DLPAR) with up to 254 partitions supported
The p5-595 supports AIX® 5L V5.2 and V5.3, Linux™, and i5/OS V5R3 operating systems. These operating systems can run simultaneously in different partitions within the p5-595 server.
Note: Not all system features available under the AIX 5L operating system are available under the Linux operating system.
This announcement also provides hardware features required for support of i5/OS on the IBM eServer
p5 570 (9117-570).
Back to top
|
|
| Key prerequisites |
|
One or more of the following operating systems:
- AIX 5L for POWER™ V5.2 with the 5200-04 Recommended Maintenance Package (APAR IY56722), or later, plus APAR IY60347
- AIX 5L for POWER V5.3 with APAR IY60349, or later
- i5/OS V5R3, or later, in a partition hosted by AIX 5L
- SUSE LINUX Enterprise Server 9 for POWER systems, or later
- Red Hat Enterprise Linux AS for POWER Version 3
Back to top
|
|
| Planned availability date |
|
November 19, 2004
- January 21, 2005, for Base Customer Specify Placement (#8453)
- February 28, 2005, for Acoustic Doors OEM (#6852 and #6854)
- February 28, 2005, for model conversion from 9119-590 to 9119-595
- April 8, 2005, for 32 GB Memory Cards (#7829 and #8198)
Note: i5/OS operating in a partition on a p5-595 server and the availability of 9411-100 will be supported on December 10, 2004.
Refer to the
Reference information
section for additional announcement information.
Back to top
|
|
| Description |
|
Accessibility by people with disabilities
IBM eServer p5 595 (9119-595) is capable as of November 19, 2004, when used in accordance with IBM's
associated documentation, of satisfying the applicable requirements of Section 508 of the
Rehabilitation Act, provided that any assistive technology used with the product properly
interoperates with it.
Back to top
|
|
| Statement of general direction |
|
IBM intends to offer Capacity BackUp configurations for machine type 9119 for use in disaster recovery scenarios. The systems will be offered with primarily inactive CoD processors and will only support temporary activation of processors using On/Off CoD. The announce and availability dates are planned for first quarter 2005.
IBM intends to provide support for the IBM eServer p5 595 (9119-595) and p5-590 (9119-590) within the Cluster 1600 (9078-160) running Cluster Systems Management (CSM) V1.4 for both SUSE LINUX Enterprise Server 9 and AIX 5L V5.2 and V5.3 in fourth quarter 2004.
IBM plans to extend the capabilities of the IBM eServer pSeries® High Performance Switch (HPS) (7045-SW4) with AIX 5L V5.2 by introducing support for the IBM eServer p5 595 and 590. This capability is planned to be available in second quarter 2005.
Dual service processor automatic failover capability
All 590 and 595 servers can be shipped with dual service processor cards. IBM intends to provide an automatic failover capability to the redundant service processor in the first half of 2005. IBM plans to make the failover support available via a no-charge firmware upgrade.
All statements regarding IBM's plans, directions, and intent are subject to change or withdrawal
without notice, and represent goals and objectives only.
Back to top
|
|
| Reference information |
|
- Hardware Announcement 104-381 , dated October 15, 2004, for IBM eServer p5 590 (9119-590)
- Hardware Announcement 104-379 , dated October 15, 2004, for IBM eServer i5 9411 100 — IBM eServer p5 I/O sub-system for i5/OS
- Software Announcement 204-246 , dated October 15, 2004, for i5/OS on pSeries
Trademarks
Back to top
|
|
| Publications |
|
The following information is shipped with the p5-595. Additional copies are available. To order, contact your IBM representative.
Order
Title number
IBM eServer(R) Hardware Information SK3T-8159
Center CD-ROM
IBM eServer Safety Information G229-9054
Setup Instructions SA41-5156
IBM Statement of Limited Warranty Z125-4753
IBM License Agreement for Machine Code Z125-5468
Pointer Sheet for Machine Internal GC52-1065
Code License Agreement
Back to top
|
|
| Services |
|
Integrated Technology Services
IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.
These services help you learn about, plan, install, manage, or optimize your IT infrastructure for e-business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.
For details on available services, contact your IBM representative or visit
For details on education offerings related to specific products, visit
Select your country, and then select the product as the category.
Back to top
|
|
| Technical information |
|
Physical specifications: IBM eServer p5 595 (9119-595) Primary System Rack
The p5-595 system includes a 24-inch primary system rack with 42U of rack space for:
- p5-595 server CEC assembly with one to four processor books (16- to 64-way) and a maximum of 24 RIO-2 adapters
- A primary and redundant bulk power assembly (BPA)
- A primary and redundant, optional Integrated Battery Backup (IBB) feature
- Up to four RIO-2 I/O drawers
- Covers, front and rear (option for either slim line or acoustic)
The p5-595 CEC rack incorporates a BPA, which provides a maximum power of 22.7 kW through either a 200, 380, or 480 V ac (3-phase) dual ac line cord. The BPA is mounted in the front (primary) and rear (redundant) sections of the top 8Us of the rack. The CEC rack has an option for an Integrated Battery Backup (IBB) feature mounted in the front (primary) and rear (redundant) sections of the rack.
pSeries® Powered Expansion Rack (#5792)
The p5-595 includes an optional 24-inch Powered Expansion Rack (#5792) with 42U of rack space for:
- A primary and redundant bulk power assembly (BPA)
- A primary and redundant, optional Integrated Battery Backup (IBB) feature
- A maximum of eight RIO-2 I/O drawers
- Covers, front and rear (option for either slim line or acoustic)
A BPA is mounted in the front (primary) and rear (redundant) sections of the top 8Us of the rack. Each BPA provides a maximum power of 22.7 kW through either a 200, 380, or 480 V ac (3-phase) dual ac line cord. The powered Expansion Rack (#5792) has an option for a redundant Integrated Battery Backup feature mounted in the front (primary) and rear (redundant) sections of the rack.
pSeries Expansion Rack (#8691)
The p5-595 system includes a second bolt-on Expansion Rack (#8691). The bolt-on rack is a 24-inch rack with 42U of rack space for mounting a maximum of eight RIO-2 I/O drawers. This rack bolts onto either the CEC system rack or the powered Expansion Rack (#5792). The bolt-on rack contains I/O drawers only and receives power from either the CEC rack or the powered Expansion Rack. It has an option for either slim line or acoustic front and rear covers.
Dimensions
- 1 Frame — Dimensions are identical for a p5-595 system rack, powered Expansion Rack (#5791), and bolt-on Expansion Rack (#8691).
- 2 Frame — Dimensions include the p5-595 system rack with the bolt-on Expansion Rack, or the powered Expansion Rack (#5791) with the bolt-on Expansion Rack (#8691).
Slim line Acoustic
mm (in) mm (in)
1 Frame 2 Frame 1 Frame 2 Frame
Height 2,025 (79.7) 2,025 (79.7) 2,025 (79.7) 2,025 (79.7)
Width 785 (30.9) 1,575 (62.0) 785 (30.9) 1,575 (62.0)
Depth 1,326 (52.2) 1,326 (52.2) 1,681 (66.2) 1,681 (66.2)
Maximum weight configuration
The maximum weight configuration of a p5-595 rack assembly occurs when the primary CEC rack is joined with a bolt-on Expansion Rack (#8691). The options for this configuration include:
- Processor books (2)
- I/O drawers (12 without IBB, 10 with IBB)
- Integrated Battery Backup (IBB) feature with redundancy
- Slim line or acoustic covers
The following weights include the required bulk power assembly (BPA).
p5-595 CEC rack with bolt-on Expansion Rack (#8691)
With acoustic doors With slim line doors
With IBB Without IBB With IBB Without IBB
kg (lb) kg (lb) kg (lb) kg (lb)
2,458 (5,420) 2,398 (5,287) 2,441 (5,381) 2,380 (5,248)
The maximum stand-alone weight of a fully populated p5-595 CEC rack with two processor books and four I/O drawers without IBB and two I/O drawers with IBB is:
p5-595 CEC rack
With acoustic doors With slim line doors
With IBB Without IBB With IBB Without IBB
kg (lb) kg (lb) kg (lb) kg (lb)
1,310 (2,887) 1,249 (2,754) 1,301 (2,868) 1,241 (2,735)
The maximum weight configuration of the powered Expansion Rack (#5792) occurs when it is joined with a bolt-on Expansion Rack (#8691). The options for this configuration include:
- I/O drawers (10 with IBB)
- Integrated Battery Backup (IBB) feature with redundancy
- Slim line or acoustic doors
The following weights include the required bulk power assembly (BPA).
Powered Expansion Rack (#5792) with
bolt-on Expansion Rack (#8691)
With acoustic doors With slim line doors
With IBB Without IBB With IBB Without IBB
kg (lb) kg (lb) kg (lb) kg (lb)
1,960 (4,322) N/A(1) 1,943 (4,284) N/A(1)
- 1
- Maximum weight occurs only with IBB. Without IBB, system configuration does not require a #8691. The preceding table assumes full IBB of the bulk power assembly.
The maximum stand-alone weight of a fully populated powered Expansion Rack (#5792) includes the following options:
- I/O drawers (8 without IBB, 6 with IBB)
- Integrated Battery Backup (IBB) feature with redundancy
- Slim line or acoustic doors
Powered Expansion Rack (#5792)
With acoustic doors With slim line doors
With IBB Without IBB With IBB Without IBB
kg (lb) kg (lb) kg (lb) kg (lb)
1,142 (2,517) 1,273 (2,806) 1,131 (2,494) 1,264 (2,786)
For the Site Hardware Planning Guide , visit the IBM eServer Hardware Information Center and select "Planning."
To help assure installability and serviceability in non-IBM, industry-standard racks, review the vendor's installation planning information for any product-specific installation requirements.
Operating environment
-
Temperature:
- 10° to 32°C (50 to 90°F) for 16- to 32-way
-
10° to 28°C (50 to 82°F) for 48- to 64-way
Note: The above maximum temperatures of 32°C (90°F) and 28°C (82°F) are linearly derated above 1,295 m (4,250 ft) as follows:
- The maximum altitude for 16-way and 32-way p5-595 systems is 3,048 m (10,000 ft). The maximum temperature at 3,048 m (10,000 ft) is 24°C (75.2°F).
- The maximum altitude for 48-way and 64-way p5-595 systems is 2,133 m (7000 ft). The maximum temperature at 2,133 m (7000 ft) is 24°C (75.2°F).
- Relative humidity: 8% to 80%
- Maximum wet bulb: 23°C (73°F) (operating)
-
Sound power:
- 8.3 bels (operating with slim line covers)
- 7.6 bels (operating with acoustic covers)
-
Sound pressure:
- 66 dBa (operating with slim line covers)
- 59 dBa (operating with acoustic covers)2
- 2
- Noise levels are for principal (typical) configurations of each frame. The 7 dB reduction in noise level with the acoustical doors corresponds to a factor of 4 reduction. That is, the noise level of a single A-Frame with thin covers is about the same as five A-Frames with acoustic covers.
Power requirements
- Operating voltage (3-phase V ac at 50/60 Hz): 200 to 240 V; 380 to 415 V; 480 V
- Rated current (A per phase): 60 A; 32 A; 24 A
- Inrush current: 163 A (maximum)
- Power consumption: 22,710 watts (maximum)
- Power source loading: 22.7 kVA
- Thermal output: 22,710 joules/sec (77,500 Btu/hr) maximum
EMC conformance classification: This equipment is subject to FCC rules and shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution.
- U.S. — FCC CFR47 Part 15 Class A
- Europe — CISPR 22 Class A; "CE" Mark of Conformity
- Japan — VCCI-1
- Korea — Korean Requirement Class A
Homologation — Telecom environmental testing (Safety and EMC): Homologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (H&TA) organization in LaGaude.
This IBM eServer model and applicable features meet the environmental testing requirements of the country telecom and have been designed and tested in compliance with the Full Quality Assurance Approval (FQAA) process as delivered by the British Approval Board for Telecom (BABT), the U.K. telecom regulatory authority.
Product safety/Country testing/Certification
- U.S.: UL
- Canada: CNL (CSA or cUL)
- Germany/Europe: GS Mark (Safety, TUV, EN60 950)
General requirements: The 9119-595 Server is in compliance with IBM Corporate Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard (Suppliers Declaration).
Hardware requirements
Minimum system configuration — IBM eServer p5 595
The minimum configuration for a p5-595 includes the following items:
- One — IBM eServer p5 595 (9119-595)
-
One — 16-Way, POWER5™ Processor Book, 0-Way Active (#7813 or #7988)
Note: The following must be added to p5-595 servers with one processor book (#7813):
- One — Cooling Group (#7807)
- One — Power Cable Group (#7826)
- Sixteen — 1-Way, Processor Activations (#7815 or #7990)
- Two — Memory cards with a minimum of 8 GB of activated memory
- Two — Processor Clock Cards, Programmable (#7810)
- One — Power Cable Group, Bulk Power to CEC and Fans (#7821)
- Three — Power Converter Assemblies, Central Electronics Complex (#7809)
- One — Power Cable Group, First Processor Book (#7822)
- Two — Service Processors (#7811)
- One — Multiplexer Card (#7812)
- Two — RIO-2 Loop Adapter, Single Loop (#7818)
- One — I/O Drawer (4U rack space required)(#5791 or #5794)
- One — Remote I/O Cable, 0.6 M (#7924)(between drawer halves)
- Two — Remote I/O Cables, 3.5 M (#3147)
- Two — 15,000 RPM Ultra3 SCSI Disk Drive Assembly (#3277 or #3278)
- One — PCI SCSI Adapter or PCI LAN Adapter for attachment of a device to read CD media or attachment to a NIM server
- One — I/O Drawer Attachment Cable Group (#6122)
- One — Slim Line or Acoustic Door Kit (#6251 or #6252)
- Two — Bulk Power Regulators (#6186)
- Two — Power Controller Assemblies (#7803)
- Two — Power Distribution Assemblies (#7837)
- Two — Line Cords (#86xx)
- One — Language Specify (#9xxx)
Model conversion
IBM eServer p5 590 to p5 595 (9119-590 to 9119-595)
Customers with installed p5-590 servers can increase their computing power by ordering a model conversion to the p5-595 server.
Ordering the model conversion provides:
- A change in the model designation from p5-590 to p5-595 (9119-590 to 9119-595)
- p5-595 labels with the same serial number as the existing p5-590 server
- Any model-specific system documentation that ships with a new 595 server
Each model conversion order also requires feature conversions to:
- Update machine configuration records
- Ship system components as necessary
Feature conversions must be processed as follows for each 0/16-way processor book and CUoD activation feature on the existing p5-590 server, if installed:
-
If the resulting p5-595 is a standard system:
- 7981 to 7988 — p5-590 Standard Processor Book to p5-595 Standard Processor Book
- 7925 to 7990 — Permanent Processor Activations
- 7993 to 7996 — On/Off Processor Billing
- 7839 to 7994 — On/Off Processor Enablement
- 7926 to 7991 — 30 Days Prepaid Reserve Capacity
-
If the resulting p5-595 is a turbo system:
- 7981 to 7813 — p5-590 Standard Processor Book to p5-595 Turbo Processor Book
- 7925 to 7815 — Permanent Processor Activations
- 7993 to 7972 — On/Off Processor Billing
- 7839 to 7971 — On/Off Processor Enablement
- 7926 to 7975 — Prepaid Reserve Capacity
Notes
- The existing model 590 components replaced during model conversions and feature conversions become the property of IBM and must be returned.
- Feature conversions are always implemented on a "quantity of one for quantity of one" basis. Multiple existing features may not be converted to a single new feature. Single existing features may not be converted to multiple new features.
- The system racks, power components, cables, memory, I/O drawers, and adapter cards from the existing p5-590 server may be utilized with the resulting p5-595 server.
Software requirements
One or more of the following operating systems:
- AIX® 5L for POWER™ V5.2 with the 5200-04 Recommended Maintenance Package (APAR IY56722), or later, plus APAR IY60347
- AIX 5L for POWER V5.3 with APAR IY60349, or later
- i5/OS V5R3, or later, in a partition hosted by AIX 5L
- SUSE Linux™ Enterprise Server 9 for POWER systems, or later
- Red Hat Enterprise Linux AS for POWER Version 3
Note: Not all system features available under the AIX 5L operating system are available under the Linux operating system.
For a list of systems and features that operate with Linux, visit
Limitations
Configuration information
IBM eServer p5 595 (9119-595)
The model 595 consists of the following major components:
- A 42U-tall, 24-inch system rack with auxiliary expansion racks, if required.
- A redundant power subsystem housed in the top 8U of the rack, with optional battery backup capability.
- An 18U-tall central electronics complex (CEC) housing the system backplane cooling fans and system electronic components.
- One to four 16-way POWER5 processor books mounted in the CEC. Each processor book incorporates 16 memory slots.
- One to 12 I/O drawers, each containing 20 PCI-X slots and either 8 or 16 hot-swap SCSI-3 disk bays.
Central electronics complex
- The p5-595 CEC is an 18U-tall, 24-inch rack-mounted device. It houses the system processors, memory, system support processor, I/O drawer connection capability, and associated components. It is installed immediately below the power subsystem.
-
The p5-595 can be populated with up to four POWER5 16-way processor
books. Each processor book contains two 8-way multi-chip modules (MCMs).
Each 8-way MCM contains four dual-core processor chips.
- Each pair of processors is supported by 1.9 MB of Level 2 cache and 36 MB of Level 3 cache.
- Processor books are available in standard (1.65 GHz) and turbo (1.9 GHz) speeds. All processor books in a p5-595 must operate at the same speed.
- Each processor book provides 16 memory card slots and 6 slots for RIO-2 dual loop adapters for attachment of I/O drawers.
- One Multiplexer Card (#7812) is required for each processor book. The Multiplexer Card provides communication between the individual processor book and the System Service Processor.
Memory
- The p5-595 utilizes dual data rate (DDR) DRAM memory cards.
- Each processor book provides 16 memory card slots for a maximum of 64 memory cards per server.
- Minimum system memory is 8 GB. Maximum system memory is 2048 GB.
-
The following DDR1 memory is available:
- 4 GB 266 MHz CUoD card with 2 GB active (#7816)
- 8 GB 266 MHz CUoD card with 4 GB active (#7835)
- 16 GB fully activated 266 MHz card (#7828)
- 32 GB fully activated 200 MHz card (#7829)
- 256 GB package of 32 fully activated 8 GB cards (#8195)
- 512 GB package of 32 fully activated 16 GB cards (#8197)
- 512 GB package of 16 fully activated 32 GB cards (#8198)
- DDR2 memory is available in 4 GB, 533 MHz fully activated memory cards (#7814).
- DDR1 and DDR2 cannot be mixed within a p5-595 server.
- Memory must be installed in identical pairs.
- p5-595 servers with one processor book must have a minimum of two memory cards installed.
- p5-595 servers with two or more processor books must have a minimum of four memory cards installed per processor book (two per MCM).
-
The following memory configuration guidelines are recommended.
- The same amount of memory should be used for each MCM (two per processor book) in the system.
- No more than two different sizes of memory cards should be used in any processor book.
- All MCMs (two per processor book) in the system should have the same aggregate memory size.
- A minimum of half of the available memory slots in the system should contain memory.
- It is better to install more cards of smaller capacity than fewer cards of larger capacity.
-
For p5-595 servers being used for high-performance computing, the
following are
strongly
recommended:
- Use DDR2 memory.
- Install some memory in support of each 8-way MCM (two MCMs per processor book).
- Use the same size memory cards across all MCMs and processor books in the system.
Racks, power, and cooling
- The p5-595 server must be installed in a raised floor environment.
- The primary system rack is a 24-inch rack with an integrated power subsystem to support the p5-595 system. It provides 42U of rack space and houses the CEC and its components.
- A powered Expansion Rack (#5792) is available for large system configurations that require more power and space than is available from the primary system rack. It provides the same redundant power subsystem available in the primary rack.
- A nonpowered Expansion Rack (#8691) is available if additional 24-inch rack space is required. To install the Expansion Rack feature, the side cover of the system rack or powered Expansion Rack is removed, the Expansion Rack (#8691) is bolted to the side, and the side cover is placed on the exposed side of the Expansion Rack (#8691). Power for components in the Expansion Rack is provided from the bulk power assemblies in the powered Expansion Rack.
-
All p5-595 racks and expansion feature racks must have door assemblies
installed. Door kits containing front and rear doors are available in
either slim line or acoustic styles.
- The slim line door kit provides a smaller footprint for use where conservation of space is desired.
- The acoustic door kit provides additional acoustic dampening for use where a quieter environment is desired.
- The height of the system rack or expansion rack features (42U) may require special handling when shipping by air or when moving under a low doorway.
- The p5-595 uses redundant power throughout its design. It implements redundant bulk power assemblies, Bulk Power Regulators, power controllers, power distribution assemblies, DC Power Converters, and associated cabling.
- Power for the p5-595 CEC is supplied from DC bulk power assemblies in the system rack. The bulk power is converted to the power levels required for the CEC via DC Power Convertors.
-
The primary system rack and powered Expansion Rack always incorporate two
bulk power assemblies for redundancy. These provide 350 V dc power for
devices located in those racks and associated nonpowered Expansion Racks.
These bulk power assemblies are mounted in front and rear positions and
occupy the top 8U of the rack. To help provide optimum system
availability, these bulk power assemblies should be powered from separate
power sources with separate line cords.
- Three DC Power Converters (#7809) are always required for miscellaneous CEC components and the first 16-way processor book.
- Three additional DC Power Converters must be added for each additional 16-way processor book (second, third, or fourth).
-
The base CEC contains four cooling fans. Cooling group feature number
7807 is required for p5-595 servers configured with:
- One or more turbo processor books (#7813)
- Two or more standard processor books (#7988)
-
Power cable groups are used to connect the DC Power Converters to the
bulk power assembly.
- Feature number 7821 provides power for the CEC and four cooling fans.
- Feature number 7822 provides power for the first processor book.
- Feature number 7823 provides power for the second processor book.
- Feature number 7824 provides power for the third processor book.
- Feature number 7825 provides power for the fourth processor book.
- Feature number 7826 provides power for cooling group feature number 7807.
- Redundant Bulk Power Regulators (BPR) (#6186) interface to the bulk power assemblies to help ensure proper power is supplied to the system components. Bulk Power Regulators are always installed in pairs in the front and rear bulk power assemblies to provide redundancy. The number of Bulk Power Regulators required is configuration-dependent based on the number of processor MCMs and I/O drawers installed.
- Redundant Bulk Power Controller (BPC) (#7803) assemblies are required for the bulk power assemblies. In addition to providing power control, each BPC provides six power connectors for attaching system components.
- Redundant Bulk Power Distribution (BPD) Assemblies (#7837) provide additional power connections to support the system cooling fans DC Power Converters contained in the CEC and the I/O drawers. Ten connector locations are provided by each power distribution assembly.
- When p5-595 servers contain three or four processor books, the power subsystem in the primary system rack can support only the CEC and any I/O drawers that can be mounted in the system rack itself. In such configurations, additional I/O drawers must be mounted in the powered Expansion Rack (#5792). In very large configurations, which include battery backup, the nonpowered Expansion Rack (#8691) is attached to the powered Expansion Rack (#5792).
- The power subsystem in the primary system rack is capable of supporting p5-595 servers with one or two processor books installed and up to 12 attached I/O drawers. In such configurations, some I/O drawers are mounted in the nonpowered Expansion Rack (#8691), which is attached directly to the system rack. The I/O drawers in the feature number 8691 rack receive their power from the power subsystem in the system rack.
- p5-595 servers with one or two processor books installed can also use the powered Expansion Rack for mounting any I/O drawers that cannot be mounted in the primary system rack. Customers purchasing p5-595 servers with only one or two processor books and more I/O drawers than can be configured in the primary system rack should carefully consider their future system growth requirements to determine which rack combination to purchase.
- The number of Bulk Power Regulators (BPR) (#6186) and Bulk Power Distribution (BPD) Assemblies (#7837) varies, depending on the number of processor books, I/O drawers, and battery backup features installed, as well as the racking configurations. The following tables provide the number of BPRs and BPDs required for each combination:
p5-595 Servers using Powered Expansion Rack (#5792) without Battery Backup (#6200)
1 Processor 2 Processor 3 Processor 4 Processor
Book Books Books Books
BPRs BPDs BPRs BPDs BPRs BPDs BPRs BPDs
1 Drawer 2 2(3) 4 4 6 4 6 4
2 Drawers 4 2(3) 6 4 6 4 6 4
3 Drawers 4 2(3) 6 4 6 4 6 4
4 Drawers 4 2(3) 6 4 6 4 6 4
5 Drawers 6 4 8 6 8 4 8 4
6 Drawers 6 4 8 6 8 6 8 6
7 Drawers NA NA 8 6 8 6 8 6
8 Drawers NA NA 8 6 8 6 8 6
9 Drawers NA NA 8 8 10 6 10 6
10 Drawers NA NA 8 8 10 6 10 6
11 Drawers NA NA 8 8 10 6 10 6
12 Drawers NA NA 8 8 10 6 10 6
- 3
- Four BPDs are required for p5-595 servers equipped with one #7813 processor book and four or fewer I/O drawers.
p5-595 Servers using Powered Expansion Rack (#5792) with Battery Backup (#6200)
1 Processor 2 Processor 3 Processor 4 Processor
Book Books Books Books
BPRs BPDs BPRs BPDs BPRs BPDs BPRs BPDs
1 Drawer 2 2(3) 4 4 6 4 6 4
2 Drawers 4 2(3) 6 4 6 4 6 4
3 Drawers 4 2(3) 8 4 8 4 8 4
4 Drawers 6 4(3) 8 4 8 4 8 4
5 Drawers 6 4 8 4 8 4 8 4
6 Drawers 6 4 8 6 8 6 8 6
7 Drawers NA NA 8 6 8 6 8 6
8 Drawers NA NA 10 6 10 6 10 6
9 Drawers NA NA 10 6 10 6 10 6
10 Drawers NA NA 10 6 10 6 10 6
11 Drawers NA NA 10 8 10 8 10 8
12 Drawers NA NA 10 8 10 8 10 8
p5-595 servers using #8691 nonpowered Expansion Rack without Integrated Battery Backup (#6200)
1 Processor Book 2 Processor Books
BPRs BPDs BPRs BPDs
1 Drawer 2 2(3) 4 4
2 Drawers 4 2(3) 6 4
3 Drawers 4 2(3) 6 4
4 Drawers 4 2(3) 6 4
5 Drawers 4 4 6 4
6 Drawers 4 4 6 4
7 Drawers NA NA 6 6
8 Drawers NA NA 6 6
9 Drawers NA NA 6 6
10 Drawers NA NA 6 6
11 Drawers NA NA 6 6
12 Drawers NA NA 6 6
p5-595 Servers using #8691 nonpowered Expansion Rack with Integrated Battery Backup (#6200)
1 Processor Book 2 Processor Books
BPRs BPDs BPRs BPDs
1 Drawer 2 2(3) 4 4
2 Drawers 4 2(3) 6 4
3 Drawers 4 2(3) 6 4
4 Drawers 4 4(3) 6 4
5 Drawers 4 4 6 4
6 Drawers 4 4 6 4
7 Drawers NA NA 6 6
8 Drawers NA NA 6 6
9 Drawers NA NA 6 6
10 Drawers NA NA 6 6
11 Drawers NA NA 6 6
12 Drawers NA NA 6 6
- An optional Integrated Battery Backup is available, if desired. The battery backup features are designed to protect against power line disturbances and provide sufficient power to allow an orderly system shutdown in the event that the power sources fail. The battery backup features each require 2U of space in the primary system rack or in the powered Expansion Rack (#5792). The battery backup features attach to the system Bulk Power Regulators.
- The primary Integrated Battery Backup (#6200) is used to back up the power subsystem mounted in the front of the system or powered Expansion Racks. If battery backup is desired, one feature number 6200 should be ordered for each BPR in the front power subsystem. The primary battery backup features mount in the front of the rack. The first and second battery backup units are mounted in the 13U and 15U locations within the rack. If a third primary backup feature is required, it will be mounted at the 11U location.
- The redundant Integrated Battery Backup (#6201) is used to back up the power subsystem mounted in the back of the system or powered Expansion Racks. If redundant battery backup is desired, one feature number 6201 should be ordered for each BPR in the rear power subsystem. The primary battery backup features mount in the back of the rack behind the primary battery backup features. The first and second battery backup units are mounted in the 13U and 15U locations within the rack. If a third primary backup feature is required, it will be mounted at the 11U location.
- If additional external communication and storage devices are required, 7014-T00 or T42 racks should be ordered. There is no limit on the number of 7014 racks allowed.
Logical partitioning
- Logical partitioning (LPAR) allows the p5-595 server resources to be allocated and to simultaneously run multiple instances of the supported operating systems on a single server.
- LPAR allocation, monitoring, and control is provided by the Hardware Management Console.
- Each LPAR functions under its own instance of the operating system.
- A minimum of 128 MB of memory is required per LPAR.
Advanced POWER Virtualization technology and Partition Load Manager
- Advanced POWER Virtualization feature allows partitions to be created in units of less than one CPU (sub-CPU LPARs) and allows the same system I/O to be virtually allocated to these partitions.
- With the Advanced POWER Virtualization feature, the processors on the system can be partitioned into as many as 10 LPARs per processor.
- The Advanced POWER Virtualization feature includes Partition Load Manager, which provides cross-partition workload management across the system LPARs.
- An encrypted key is supplied to the customer and installed on the system, authorizing the partitioning at the subprocessor level.
- Using the Advanced POWER Virtualization feature, the p5-595 can be divided into as many as 254 LPARs. System resources can be dedicated to each LPAR.
- The Advanced POWER Virtualization feature requires AIX 5L V5.3 or SUSE LINUX Enterprise Server 9 for POWER.
System control
- Each p5-595 server must be connected to a Hardware Management Console (HMC) for system control, LPAR, Capacity Upgrade on Demand, and service functions. The HMC is capable of supporting multiple POWER5 servers.
- Each p5-595 server can be connected to two HMCs for redundancy, if desired.
- The p5-595 is connected to the HMC through Ethernet connections to the front and rear Bulk Power Controllers (#7803).
I/O drawers
- The p5-595 utilizes 4U-tall remote I/O drawers for directly attached PCI or PCI-X adapters and SCSI disk capabilities.
- Each I/O drawer is divided into two separate halves. Each half contains 10 blind-swap PCI-X slots and one or two Ultra3 SCSI 4-pack backplanes for a total of 20 PCI slots and up to 16 hot-swap disk bays per drawer.
- A minimum of one I/O drawer (#5791 or #5794) is required per system. I/O drawer feature number 5791 contains 20 PCI-X slots and 16 disk bays, and feature number 5794 contains 20 PCI-X slots and 8 disk bays.
-
Existing 7040-61D I/O drawers may be attached to a p5-595 server as
additional I/O drawers, if available.
- Only 7040-61D I/O drawers containing feature number 6571 PCI-X planars are supported. Any feature number 6563 PCI planars must be replaced with feature number 6571 PCI-X planars before the drawer can be attached.
- Only adapters supported on the p5-595 feature I/O drawers are supported in 7040-61D I/O drawers, if attached. Unsupported adapters must be removed before attaching the drawer to the p5-595 server.
- A maximum of 12 I/O drawers can be connected to a p5-595 server.
- One single-wide, blind-swap cassette (equivalent to those in #4599) is provided in each PCI or PCI-X slot of the I/O drawer. Cassettes not containing an adapter will be shipped with a "dummy" card installed to help ensure proper environmental characteristics for the drawer. If additional single-wide, blind-swap cassettes are needed, feature number 4599 should be ordered.
- All 10 PCI-X slots on each I/O drawer planar are capable of supporting either 64-bit or 32-bit PCI or PCI-X adapters. Each I/O drawer planar provides 10 PCI-X slots capable of supporting 3.3-V signaling PCI or PCI-X adapters operating at speeds up to 133 MHz.
- Each I/O drawer planar incorporates two integrated Ultra3 SCSI adapters for direct attachment of the two 4-pack hot-swap backplanes in that half of the drawer. These adapters do not support external SCSI device attachments.
- Each half of the I/O drawer is powered separately.
I/O drawer attachment
- System I/O drawers are always connected to the 595 CEC via RIO-2 loops. Drawer connections are always made in loops to help protect against a single point-of-failure resulting from an open, missing, or disconnected cable. Systems with nonlooped configurations could experience degraded performance and serviceability.
- RIO-2 loop connections operate at 1 GHz. RIO-2 loops connect to the system CEC via RIO-2 loop attachment adapters (#7818). Each adapter has two ports and can support one RIO-2 loop. Up to six of the adapters can be installed in each 16-way processor book.
- Up to 12 I/O drawers can be attached to the p5-595, depending on the server and attachment configuration.
- I/O drawers may be connected to the CEC in either single-loop or dual-loop mode. Dual-loop mode is recommended whenever possible as it provides the maximum bandwidth between the I/O drawer and the CEC.
- Single-loop mode connects an entire I/O drawer to the CEC through one RIO-2 loop (two ports). The two I/O planars in the I/O drawer are connected with a short RIO-2 cable. Single-loop connection requires one loop (two ports) per I/O drawer.
- Dual-loop mode connects each I/O planar in the drawer to the CEC separately. Each I/O planar is connected to the CEC through separate RIO-2 loops. Dual-loop connection requires two loops (four ports) per I/O drawer.
- The following table indicates the number of single-looped and double-looped I/O drawers that can be connected to a p5-595 server based on the number of processor books installed:
Single-looped Dual-looped
1 processor book 6 3
2 processor books 12 6
3 processor books 12 9
4 processor books 12 12
- On initial orders of p5-595 servers, IBM manufacturing will place dual-loop-connected I/O drawers as the lowest numerically designated drawers followed by any single-looped I/O drawers.
p595 system configurations
FC #8691 FC #5792
FC #8691 2/4 2/4
2 Processor Processor Processor
Books p595 Books Books
Nonpowered System Nonpowered Powered
Expansion CEC Cumulative Expansion Expansion
Rack Rack EIA Height Rack Rack
.--------------------------. .------------------------.
| | | | | |
|4U Filler | | 39U/40U | 4U Filler | |
|----------| Power | |-----------| Power |
| | | | | |
|4U Filler | | 35U/36U | 4U Filler | |
|----------|---------------| |-----------|------------|
| | | | | |
|Drawer 10 | | 31U/32U | 4U Filler | Drawer 9 |
|----------| | |-----------|------------|
| | | | | |
|Drawer 9 | | 27U/28U | 4U Filler | Drawer 8 |
|----------| | |-----------|------------|
| | CEC | | | |
|Drawer 8 | | 23U/24U | 4U Filler | Drawer 7 |
|----------| | |-----------|------------|
| | | | | |
|Drawer 7 | | 19U/20U | 4U Filler | Drawer 6 |
|----------| | |-----------|------------|
|2U Filler | | 17U/18U | | 6200-P5 |
|----------|---------------| | |------------|
| |6200-P1,6201-R1| 15U/16U | 4U Filler | 6200-R4 |
| |---------------| |-----------|------------|
|Drawer 6 |6200-P2,6201-R2| 13U/14U | 6200-R5 | 6200-P4 |
|----------|---------------| |-----------|------------|
| |6200-P3,6201-R3| 11U/12U | | |
| |---------------| | | |
|Drawer 5 | 2U Filler | 9U/10U | Drawer 12 | Drawer 3 |
|----------|---------------| |-----------|------------|
| | | | | |
|Drawer 4 | Drawer 1 | 5U/6U | Drawer 11 | Drawer 4 |
|----------|---------------| |-----------|------------|
| | | | | |
|Drawer 3 | Drawer 2 | 1U/2U | Drawer 10 | Drawer 5 |
|----------|---------------| |-----------|------------|
| With Battery Backup | | With Battery Backup |
'--------------------------' '------------------------'
FC #8691 FC #5792
1 Processor 1 Processor
Book p595 Book
Nonpowered System Powered
Expansion CEC Cumulative Expansion
Rack Rack EIA Height Rack
.-----------------------------. .------------.
| | | | |
| 4U Filler | | 39U/40U | |
|-----------| Power | | Power |
| | | | |
| 4U Filler | | 35U/36U | |
|-----------|-----------------| |------------|
| | | | |
| 4U Filler | | 31U/32U | 4U Filler |
|-----------| | |------------|
| | | | |
| 4U Filler | | 27U/28U | 4U Filler |
|-----------| | |------------|
| | CEC | | |
| 4U Filler | | 23U/24U | 4U Filler |
|-----------| | |------------|
| | | | |
| 4U Filler | | | 4U Filler |
|-----------| | |------------|
| 2U Filler | | 17U/18U | 2U Filler |
|-----------|-----------------| |------------|
| 2U Filler | 6200-P1,6201-R1 | 15U/16U | 6200-R3 |
|-----------|-----------------| |------------|
| 2U Filler | 6200-P2,6201-R2 | 13U/14U | 6200-P3 |
|-----------|-----------------| |------------|
| | | | |
| Drawer 6 | Drawer 3 | 9U/10U | Drawer 4 |
|-----------|-----------------| |------------|
| | | | |
| Drawer 5 | Drawer 1 | 5U/6U | Drawer 5 |
|-----------|-----------------| |------------|
| | | | |
| Drawer 4 | Drawer 2 | 1U/2U | Drawer 6 |
|-----------|-----------------| |------------|
| With Battery Backup | |With Battery|
| | | Backup |
'-----------------------------' '------------'
FC #8691 FC #5792
1/2 Processor 1/4 Processor
Books p595 Books
Nonpowered System Powered
Expansion CEC Cumulative Expansion
Rack Rack EIA Height Rack
.-----------------------------. .------------.
| | | | |
| 4U Filler | | 39U/40U | |
|-----------| Power | | Power |
| | | | |
| 4U Filler | | 35U/36U | |
|-----------|-----------------| |------------|
| | | | |
| Drawer 12 | | 31U/32U | Drawer 11 |
|-----------| | |------------|
| | | | |
| Drawer 11 | | 27U/28U | Drawer 10 |
|-----------| | |------------|
| | CEC | | |
| Drawer 10 | | 23U/24U | Drawer 9 |
|-----------| | |------------|
| | | | |
| Drawer 9 | | | Drawer 8 |
|-----------| | |------------|
|-----------| | |------------|
| 2U Filler | | 17U/18U | 2U Filler |
|-----------|-----------------| |------------|
| | | | |
| Drawer 8 | Drawer 4 | 13U/14U | Drawer 12 |
|-----------|-----------------| |------------|
| | | | |
| Drawer 7 | Drawer 3 | 9U/10U | Drawer 5 |
|-----------|-----------------| |------------|
| | | | |
| Drawer 6 | Drawer 1 | 5U/6U | Drawer 6 |
|-----------|-----------------| |------------|
| | | | |
| Drawer 5 | Drawer 2 | 1U/2U | Drawer 7 |
|-----------|-----------------| |------------|
| No Battery Backup | | No Battery |
| | | Backup |
'-----------------------------' '------------'
Disks, boot devices, and media devices
-
The p5-595 server must have access to a device capable of reading CD
media or to a NIM server.
- The recommended devices for reading CD media are the 7212-102, 7210-025, or 7210-030. These devices attach via a PCI SCSI adapter in one of the system I/O drawers.
- If a NIM server is used, it must attach through a PCI LAN adapter in one of the system I/O drawers. An Ethernet connection is recommended.
- A minimum of two internal SCSI hard disks are required per p5-595 server. It is recommended that these disks be used as mirrored boot devices. These disks should be mounted in the first I/O drawer whenever possible. This configuration provides service personnel the maximum amount of diagnostic information if the system encounters errors in the boot sequence.
- Boot support is also available from local SCSI, SSA, and Fibre Channel adapters, or from networks via Ethernet or token-ring adapters.
- Consideration should also be given to the placement of the AIX rootvg volume group in the first I/O drawer. This allows AIX to boot any time other I/O drawers are found offline during boot.
- If the boot source other than internal disk is configured, the supporting adapter should also be in the first I/O drawer.
- The p5-595 incorporates an Early Power Off Warning (EPOW) capability that assists in performing an orderly system shutdown in the event of a sudden power loss. IBM recommends use of the Integrated Battery Backup features or an uninterruptible power system (UPS) to help ensure against loss of data due to power failures.
PCI and PCI-X slots and adapters
- System maximum limits for adapters and devices may not provide optimal system performance. These limits are given to help assure connectivity and function.
- Configuration limitations have been established to help ensure appropriate PCI or PCI-X bus loading, adapter addressing, and system and adapter functional characteristics when ordering I/O drawers. These I/O drawer limitations are in addition to individual adapter limitations shown in the feature descriptions section of the sales manual.
Keyboards and displays
- USB keyboards supporting various language groups can be ordered with the I/O drawer for use with native-attached displays on the p5-595. A three-button USB mouse connects to the USB keyboard.
- A variety of flat panel and CRT displays are available to support graphics adapters, if desired.
Adapters
- Most PCI and PCI-X adapters for the p5-595 system are capable of being hot-plugged. Any PCI adapter supporting a boot device or system console should not be hot-plugged.
-
The following adapters are not hot-plug-capable:
- POWER GXT135P Graphics Accelerator with Digital Support (#2849)
- 2-Port Multiprotocol PCI Adapter (#2962)
- The maximum number of a specific PCI or PCI-X adapter allowed per p5-595 server may be less than the number allowed per I/O drawer multiplied by the maximum number of I/O drawers.
On demand computing
Capacity Upgrade on Demand for processors
- Capacity Upgrade on Demand (CUoD) for processors is available for the p5-595 servers. CUoD for processors allows inactive processors to be installed in the p5-595 server and can be permanently activated by the customer as required.
- All processor books available on the p5-595 are initially implemented as 16-way CUoD offerings with zero active processors.
- A minimum of 16 permanently activated processors are required on the p5-595 server.
-
The number of permanently activated processors is based on the number of
processor books installed as follows:
- One processor book installed requires 16 permanently activated processors.
- Two processor books installed requires 16 permanently activated processors.
- Three processor books installed requires 24 permanently activated processors.
- Four processor books installed requires 32 permanently activated processors.
- Additional processors on the CUoD MCMs are activated in increments of one by ordering the appropriate activation feature number. If more than one processor is to be activated at the same time, the activation feature should be ordered in multiples.
- After receiving an order for a CUoD for processors activation feature, IBM will provide the customer with a 32-character encrypted key. This key is entered into the system to activate the desired number of additional processors.
- CUoD processors that have not been activated are available to the p5-595 server for dynamic processor sparing when running the AIX 5L operating system. If the server detects the impending failure of an active processor, it will attempt to activate one of the unused CUoD processors and add it to the system configuration. This helps to keep the server's processing power at full strength until a repair action can be scheduled.
On/Off Capacity on Demand (On/Off CoD)
- On/Off Capacity on Demand (On/Off CoD) is available for p5-595 servers. On/Off CoD allows customers to temporarily activate installed CUoD processors and memory resources and later deactivate the resources as desired.
- Customers with installed but inactive CUoD processor and memory resources can order On/Off CoD activation features. Each On/Off CoD activation ordered authorizes activation of one processor or 1 GB of memory for 30 days of usage. These activations may be used for 30 consecutive days or turned on and off over a longer period of time, if desired.
- On/Off processor resources can be implemented via a prepaid plan if desired. The 30 Days Prepaid Reserve Capacity features allow use of processors for up to 30 days as required at the customer's discretion without further contracts or authorization. Prepaid Reserve Capacity requires the Advanced POWER Virtualization feature.
-
On/Off processor and memory resources can be implemented on a
"pay-as-you-go" basis.
- On/Off Processor and Memory Enablement features can be used. Signing an On/Off Capacity on Demand contract is required. An enablement code will be supplied to activate the enablement feature.
- After the On/Off Enablement feature is ordered and the associated enablement code is entered into the system, the customer must report on/off usage to IBM at least monthly. This information, which is used to compute the billing data, is provided to the sales channel, which will place an order for the quantity of On/Off Memory Day Billing features used and invoice the customer.
- Customers may order multiples of the On/Off CoD activation features if desired. The HMC controlling the p5-595 server will be used to set the parameters desired when using multiple On/Off CoD activation features.
-
Each On/Off CoD (Capacity on Demand) activation feature provides 30 days
of usage for the CUoD processor or memory feature. Each On/Off CoD
feature applies to any of the inactive CUoD processors or memory
installed in the system. The following are examples of the usage
calculation:
- A processor day is measured each time a processor is activated in a 24-hour period or any fraction thereof. If four processors are activated for two hours of testing or production, the result is four processor usage days.
- Each time processors are activated starts a new measurement day. If a customer activates four processors for a two-hour test and later in the same 24-hour period activates two processors for two hours to meet a peak workload, the result is six processor days usage.
Capacity Upgrade on Demand for memory
- Capacity Upgrade on Demand (CUoD) for memory is available for p5-595 servers. CUoD for memory allows inactive memory to be installed in the p5-595 server and can be permanently activated by the customer as required.
- CUoD for memory may be used in any available memory position.
- Additional CUoD memory cards are activated in increments of 1 GB by ordering the appropriate activation feature number. If more than one 1 GB memory increment is to be activated at the same time, the activation code should be ordered in multiples.
- After receiving an order for a CUoD for memory activation feature, IBM will provide the customer a 32-character encrypted key. This key is entered into the system to activate the desired number of additional 1 GB memory increments.
-
Memory configuration rules for the p5-595 server apply to CUoD for memory
cards as well as conventional memory cards. The memory configuration
rules are applied based upon the maximum capacity of the memory card.
- Apply 4 GB configuration rules for 4 GB CUoD for memory cards with less than 4 GB of active memory.
- Apply 8 GB configuration rules for 8 GB CUoD for memory cards with less than 8 GB of active memory.
Trial Capacity on Demand
- Trial Capacity on Demand (Trial CoD) is a function delivered with all pSeries servers supporting CUoD resources beginning May 30, 2003. Those servers with standby CUoD processors or memory will be capable of using a one-time, no-cost activation for a maximum period of 30 consecutive days. This enhancement allows for benchmarking of CUoD resources or can be used to provide immediate access to standby resources when the purchase of a permanent activation is pending.
- Trial CoD is a complimentary service offered by IBM. Although IBM intends to continue it for the foreseeable future, IBM reserves the right to withdraw Trial CoD at any time, with or without notice.
Dynamic logical partitioning
- DLPAR allows system resources to be easily and quickly configured across multiple LPARs on the p5-595 server.
- DLPAR can be used to add newly activated CUoD processors and memory into the p5-595 configuration without requiring a system reboot.
- This function is supported by AIX 5L and the Linux 2.6 kernel, which is currently available only in SUSE LINUX Enterprise Server 9 for POWER.
Planning information
Customer responsibilities: All p5-595 servers must be installed in a raised floor environment.
Cable orders: No additional cables are required.
Security, auditability, and control
This product uses the security and auditability features of the operating system and application software.
The customer is responsible for evaluation, selection, and implementation of security features,
administrative procedures, and appropriate controls in application systems and communications
facilities.
Back to top
|
|
| IBM Electronic Services |
|
IBM Global Services has transformed its delivery of hardware and software support services to put you on the road to higher systems availability. IBM Electronic Services is a Web-enabled solution that provides you with an exclusive, no-additional-charge enhancement to the service and support on the IBM eServer. You should benefit from greater system availability due to faster problem resolution and preemptive monitoring. IBM Electronic Services is comprised of two separate but complementary elements: IBM Electronic Services news page and IBM Electronic Service Agent™.
IBM Electronic Services news page provides you with a single Internet entry point that replaces the multiple entry points traditionally used by customers to access IBM Internet services and support. By using the news page, it enables you to gain easier access to IBM resources for assistance in resolving technical problems.
The IBM Electronic Service Agent is no-additional-charge software that resides on your IBM eServer system that is designed to proactively monitor events and transmit system inventory information to IBM on a periodic customer-defined timetable. The IBM Electronic Service Agent tracks system inventory, hardware error logs, and performance information. If the server is under a current IBM maintenance service agreement or within the IBM warranty period, the Service Agent automatically reports hardware problems to IBM. Early knowledge about potential problems enables IBM to provide proactive service that maintains higher system availability and performance. In addition, information collected through the Service Agent will be made available to IBM service support representatives when they are helping answer your questions or diagnosing problems.
To learn how IBM Electronic Services can work for you, visit
Back to top
|
|
| Terms and conditions |
|
This product is available for purchase under the terms of the IBM Customer Agreement (ICA).
Each IBM machine is manufactured from parts that may be new or used. In some cases, a machine may not be new and may have been previously installed.
Regardless, IBM's appropriate warranty terms apply.
Volume orders: Contact your IBM representative.
IBM Global Financing: Yes
Warranty period: One year
Warranty service: If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs) will be provided as part of the machine's standard warranty service. Service levels are response-time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information.
Customer replaceable unit service
IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU.
-
Tier 1 CRU
Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.
For machines with on-site same-day response service, IBM will replace a Tier 1 CRU part at your request, at no additional charge.
-
Tier 2 CRU
You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.
Based upon availability, CRUs will be shipped for next-business-day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, return instructions and a container is shipped with the replacement CRU, and you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement.
The following parts have been designated as Tier 1 CRU parts: Not applicable.
On-site service
IBM On-site repair: 24 hours per day, 7 days a week, same-day response. IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose.
ServiceSuite™ and ServiceElect (formerly ESA) maintenance: For ServiceElect (Z125-5510) and ServiceSuite (Z125-5745) Statements of Work
Maintenance services: If required, IBM provides repair or exchange service, depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs) will be provided as part of the machine's standard warranty service. Service levels are response-time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information.
Customer replaceable unit service
IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU.
-
Tier 1 CRU
Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.
For machines with on-site same-day response service, IBM will replace a Tier 1 CRU part at your request, at no additional charge.
-
Tier 2 CRU
You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.
Based upon availability, CRUs will be shipped for next-business-day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, return instructions and a container is shipped with the replacement CRU, and you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement.
The following parts have been designated as Tier 1 CRU parts: Not applicable.
On-site service
IBM On-site repair: 24 hours per day, 7 days a week, same-day response. IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose.
Usage plan machine: No
IBM hourly service rate classification: Two
When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.
Field-installable features: Yes
Model conversions: Yes
Machine installation: Installation is performed by IBM. IBM will install the machine in accordance with the IBM installation procedures for the machine. In the United States, contact IBM at 800-IBM-SERV (426-7378) and in other countries contact the local IBM office.
The machine installation guide specifies site preparation, physical requirements, and installation (operating) environment, and any cabling included in the installation along with the approximate installation time in hours. Customer requests for installation of items not covered in the installation guide may be performed at IBM's hourly service rate designated for the machine.
Graduated charges: Yes
Group Number: H5
Licensed machine code: IBM machine code is licensed for use by a customer on the IBM machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and for which the customer has paid.
You can obtain the agreement by contacting your IBM representative or at
Should it become necessary for IBM to make changes to machine code, IBM will make the changes available at the IBM eServer p5 technical support page on ibm.com. If the machine does not function as warranted and your problem can be resolved through your application of machine code changes, you are responsible for downloading and installing the designated machine code changes as IBM specifies. You may request IBM to install machine code changes; however, you may be charged for the installation of such changes.
Educational allowance:
A reduced charge is available to qualified education customers. The
educational allowance may not be added to any other discount or
allowance.
Back to top
|
|
| Prices |
|
The prices provided in this announcement are suggested retail prices for the U.S. only and are provided for your information only. Dealer prices may vary, and prices may also vary by country. Prices are subject to change without notice. For additional information and current prices, contact your local IBM representative.
The following are newly announced features on the specified models of the IBM eServer 9119 machine type:
Purchase
Description price MMMC(4) CSU
Machine type/model 9119-595
eServer $92,000 $2,993 No
- 4
- Minimum monthly maintenance charge
Initial/
Feature Purchase MES/ RP
Description number price Both CSU MES
Machine type/model 9119-595
AIX Partition Specify 0265 NC Initial
Linux Partition Specify 0266 NC Initial
i5/OS Partition Specify 0267 NC Initial
i5/OS Version V5R3 0530 NC Initial
Specify
2.5M 16-bit SCSI-2 2425 $ 130 Both No No
System-to-System Cable
External USB 1.44 MB 2591 100 Both No No
Diskette Drive
2-Port USB PCI Adapter 2738 300 Both No No
POWER GXT135P 2849 457 Both No No
Graphics Accelerator
with Digital Support
8-Port Asynchronous 2943 1,395 Both No No
Adapter EIA(TM)-232/RS-422,
PCI bus
128-Port Asynchronous 2944 1,295 Both No No
Controller, PCI bus
IBM ARTIC960Hx 4-Port 2947 3,625 Both No No
Multiprotocol PCI Adapter
Cable, V.24 / EIA-232 2951 175 Both Yes No
Cable, V.35 2952 320 Both Yes No
Cable, V.36 / EIA-499 2953 255 Both Yes No
Cable, X.21 2954 175 Both Yes No
2-Port Multiprotocol 2962 2,000 Both No No
PCI Adapter
RIO-2 (Remote 3147 660 Both No No
I/O-2) Cable, 3.5 M
RIO-2 (Remote 3170 800 Both No No
I/O-2) Cable, 8.0 M
36.4 GB 15,000 RPM 3277 2,125 Both No No
Ultra320 SCSI
Disk Drive Assembly
73.4 GB 15,000 RPM 3278 3,258 Both No No
Ultra320 SCSI
Disk Drive Assembly
L200P Flat Panel Monitor 3636 1,975 Both Yes No
IBM T541H /L150p 3637 750 Both Yes No
15" TFT Color Monitor
IBM C220p 21-inch 3638 995 Both Yes No
Color Monitor,
Business Black,
and Cable
IBM ThinkVision(TM) L170p 3639 995 Both Yes No
Flat Panel Monitor
Service Shelf Tool Kit 3757 0 Both No No
PCI Blind Swap 4599 50 MES No No
Cassette Kit,
Single Wide
Adapters, Universal
7040-61D I/O Drawer 4643 0 Both No No
Attachment Indicator
IBM Token-Ring PCI Adapter 4959 795 Both No No
10/100 Mbps Ethernet 4962 495 Both No No
PCI Adapter II
Initial/
Feature Purchase MES/ RP
Description number price MMMC Both CSU MES
Software Preinstall 5005 $ 0 Initial
IBM Gigabit 5700 1,700 Both No No
Ethernet-SX
PCI-X Adapter
IBM 10/100/1000 5701 1,280 Both No No
Base-TX Ethernet
PCI-X Adapter
IBM 2-Port 5706 1,920 Both No No
10/100/1000 Base-TX
Ethernet PCI-X Adapter
IBM 2-Port Gigabit 5707 2,550 Both No No
Ethernet-SX PCI-X
Adapter
PCI-X Dual Channel 5710 790 Both No No
Ultra320 SCSI
Blind Swap Adapter
PCI-X Dual Channel 5711 3,600 Both No No
Ultra320 SCSI RAID
Blind Swap Adapter
2 Gigabit 5716 2,720 Both No No
Fibre Channel
PCI-X Adapter
10 Gigabit Ethernet 5718 6,000 Both No No
-SR PCI-X Adapter
I/O Drawer, 5791 32,000 $194 Both No No
20 Slots,
16 Disk Bays
Expansion Rack, 5792 60,000 189 Both No No
Powered
I/O Drawer, 5794 30,000 194 Both No No
20 Slots,
8 Disk Bays
I/O Drw.Cbl.Grp, 6121 400 Both No No
Primary Rack/9U
I/O Drw.Cbl.Grp, 6122 400 Both No No
Primary Rack/5U
I/O Drw.Cbl.Grp, 6123 400 Both No No
Primart Rack/1U
I/O Drw.Cbl.Grp, 6124 400 Both No No
Primart Rack/13U
I/O Drw.Cbl.Grp, 6125 400 Both No No
8691 Rack/1U
I/O Drw.Cbl.Grp, 6126 400 Both No No
8691 Rack/5U
I/O Drw.Cbl.Grp, 6127 400 Both No No
8691 Rack/9U
I/O Drw.Cbl.Grp, 6128 400 Both No No
8691 Rack/13U
I/O Drw.Cbl.Grp, 6129 400 Both No No
8691 Rack/19U
Bulk Power Regulator 6186 4,000 Both No No
Integrated Battery 6200 4,500 Both No No
Backup, Primary or
Redundant-Front Mounted
Integrated Battery Backup, 6201 4,500 Both No No
Redundant Rear Mounted
PCI Universal 6204 650 Both No No
Differential Ultra
SCSI Adapter
Cable, Integrated Battery 6240 400 Both No No
Backup to Bulk Power
Regulator, Primary Rack
Cable, Integrated Battery 6241 400 Both No No
to Bulk Power Regulator,
Expansion Rack
Cable, Front Mounted 6242 400 Both No No
Integrated Battery
Backup to Rear BPR,
Primary/Expansion Rack
Initial/
Feature Purchase MES/ RP
Description number price Both CSU MES
Slim Line Doors, 6251 $ 6,000 Both No No
System and #5792 Racks
Acoustic Doors 6252 8,000 Both No No
System and #5792 Racks
Slim Line Doors, 6253 3,000 Both No No
#8691 Expansion Rack
Acoustic Doors, 6254 8,000 Both No No
#8691 Expansion Rack
Power Cord (6-foot), 6470 17 Both Yes No
To Wall (125V, 15A),
Plug Type #4
Power Cord (9-foot), 6471 17 Both Yes No
To Wall/OEM PDU,
(125V, 15A),
Plug Type #70
Power Cord (9-foot), 6472 17 Both Yes No
To Wall/OEM PDU,
(250V, 16A),
Plug Type #18
Power Cord (9-foot), 6473 17 Both Yes No
To Wall/OEM PDU,
(250V, 10A),
Plug Type 19
Power Cord (9-foot), 6474 17 Both Yes No
To Wall/OEM PDU,
(250V, 13A),
Plug Type #23
Power Cord (9-foot), 6475 17 Both Yes No
To Wall/OEM PDU,
(250V, 16A),
Plug Type #32
Power Cord (9-foot), 6476 17 Both Yes No
To Wall/OEM PDU,
(250V, 10A),
Plug Type #24
Power Cord (9-foot), 6477 17 Both Yes No
To Wall/OEM PDU,
(250V, 16A),
Plug Type #22
Power Cord (9-foot), 6478 17 Both Yes No
To Wall/OEM PDU,
(250V, 16A),
Plug Type #25
Power Cord (9-foot), 6479 17 Both Yes No
To Wall/OEM PDU,
(250V, 10A),
Plug Type #6
Power Cord (6-foot), 6487 17 Both Yes No
To Wall, (250V, 15A),
United States,
Plug Type #5
Power Cord (9-foot), 6488 48 Both Yes No
To Wall/OEM PDU,
(125V, 15A or 250V,
10A), Plug Type #2
Power Cord (9-foot), 6493 17 Both Yes No
To Wall/OEM PDU,
(250V, 10A),
Plug Type #62
Power Cord (9-foot), 6494 17 Both Yes No
To Wall/OEM PDU,
(250V, 10A),
Plug Type #69
Power Cord (9-foot), 6495 17 Both Yes No
To Wall/OEM PDU,
(250V, 10A),
Plug Type #64
Initial/
Feature Purchase MES/ RP
Description number price MMMC Both CSU MES
Power Cord (9-foot), 6496 $ 17 Both Yes No
To Wall/OEM PDU,
(250V, 10A),
Plug Type #66
Slim Line Doors OEM, 6851 6,000 Both No No
System and #5792 Racks
Acoustic Doors OEM, 6852 8,000 Both No No
System and #5792 Racks
Slim Line Doors, OEM, 6853 3,000 Both No No
#8691 Expansion Rack
Acoustic Doors, OEM, 6854 8,000 Both No No
#8691 Expansion Rack
256 Memory Activations 7799 681,472 Both No No
for #7835 Memory DIMMS
Ethernet Cable, 6M, 7801 14 Both No No
Hardware Management
Console to System Unit
Ethernet Cable, 15M, 7802 31 Both No No
Hardware Management
Console to System Unit
Bulk Power Controller 7803 4,000 Both No No
Assembly
Cooling Group 7807 4,000 Both No No
DC Power Converter, 7809 6,000 Both No No
Processor Book
Processor Clock Card, 7810 575 Initial
Programmable
System Service Processor 7811 3,500 Initial
Multiplexer Card 7812 2,200 Both No No
16-Way POWER5 Turbo 7813 127,000 $816 Both No No
CUoD Processor Book,
0-Way Active
4 GB DDR2 Memory 7814 28,672 Both No No
Card, 533 MHz
Activation, #7813 7815 32,000 377 Both Yes No
CUoD Processor Book,
One Processor
4 GB CUoD Memory 7816 7,987 Both No No
Card 2 GB
Active, DDR1
Remote I/O-2 (RIO-2) 7818 3,400 Both No No
Loop Adapter, Two Port
Pwr.Cbl.Grp, 7821 650 Initial
CEC Primary Fans
Pwr.Cbl.Grp, 7822 650 Initial
1st CEC Book
Pwr.Cbl.Grp, 7823 650 Both No No
2nd CEC Book
Pwr.Cbl.Grp, 7824 650 Both No No
3rd CEC Book
Pwr.Cbl.Grp, 7825 650 Both No No
4th CEC Book
Pwr.Cbl.Grp, 7826 650 Both No No
7807 Cooling Grp.
16 GB DDR1 Memory 7828 81,920 Both No No
Card, 266 MHz
32 GB DDR1 Memory 7829 163,840 Both No No
Card, 200 MHz
8 GB CUoD Memory 7835 15,974 Both No No
Card 4 GB Active,
DDR1
Bulk Power 7837 2,500 Both No No
Distribution
Assembly
I/O Drw.Cbl.Grp, 7847 650 Both No No
8691 Rack/13U
I/O Drw.Cbl.Grp, 7848 650 Both No No
8691 Rack/19U
Initial/
Feature Purchase MES/ RP
Description number price MMMC Both CSU MES
I/O Drw.Cbl.Grp, 7849 $ 650 Both No No
8691 Rack/23U
I/O Drw.Cbl.Grp, 7850 650 Both No No
8691 Rack/27U
I/O Drw.Cbl.Grp, 7851 650 Both No No
8691 Rack/31U
I/O Drw.Cbl.Grp, 7853 650 Both No No
5792 Rack/1U
I/O Drw.Cbl.Grp, 7854 650 Initial
5792 Rack/5U
I/O Drw.Cbl.Grp, 7855 650 Both No No
5792 Rack/9U
I/O Drw.Cbl.Grp, 7856 400 Both No No
5792 Rack/13U
I/O Drw.Cbl.Grp, 7857 400 Both No No
5792 Rack/19U
I/O Drw.Cbl.Grp, 7858 400 Both No No
5792 Rack/23U
I/O Drw.Cbl.Grp, 7859 400 Both No No
5792 Rack/27U
I/O Drw.Cbl.Grp, 7860 400 Both No No
Prim.Rack/31U
RIO-2 (Remote I/O-2) 7924 300 Both No No
Cable, 0.6 M
Bolt-Down Kit, 7937 7,000 Both No No
Low-Raised Floor
Bolt-Down Kit, 7938 7,000 Both No No
High-Raised Floor
Compact Handling 7960 500 Initial
Option
1 GB Activation 7970 2,662 Both Yes No
#7816 and #7835
Memory Features
On/Off Processor 7971 0 MES Yes No
Enablement for #7813
On/Off Processor 7972 356 $ 0 MES Yes No
Billing for
Feature #7813
On/Off Memory 7973 0 MES Yes No
Enablement
On/Off Memory 7974 30 MES Yes No
Billing
30 Days Prepaid 7975 10,667 0 Both Yes No
Reserve Capacity
for #7813
16-Way POWER5 Standard 7988 86,000 599 Both No Cnv
CUoD Processor Book,
0-Way Active
Activation, #7988 7990 21,000 360 Both Yes No
CUoD Processor
Book, One Processor
30 Days Prepaid 7991 7,000 0 MES Yes No
Reserve Capacity
for #7988
Advanced POWER 7992 0 Both Yes No
Virtualization
On/Off Processor 7994 0 MES Yes No
Enablement for #7988
On/Off Processor 7996 233 0 MES Yes No
Billing for CoD
for Feature #7988
128-Port Asynchronous 8131 60 Both Yes No
Controller Cable,
4.5 Meter
128-Port Asynchronous 8132 40 Both Yes No
Controller Cable,
23 cm (9-inch)
RJ-45 to DB-25 8133 120 Both Yes No
Converter Cable
Initial/
Feature Purchase MES/ RP
Description number price MMMC Both CSU MES
Rack-Mountable Remote 8136 $ 2,500 Both Yes No
Asynchronous Node
16-Port EIA-232
Enhanced Remote 8137 1,595 Both Yes No
Asynchronous Node
16-Port EIA-232
256 GB DDR1 Memory 8195 786,432 Both No No
(32 x 8 GB)
512 GB DDR1 Memory 8197 1,703,936 Both No No
(32 x 16 GB Cards)
512 GB DDR1 Memory 8198 2,228,224 Both No No
(16 x 32 GB Cards)
Base Customer Specify 8453 0 Initial
Placement
Line Cord, 8AWG, 8677 1,000 Both No No
14 ft, No Plug
Line Cord, 6AWG, 8686 2,500 Both No No
14 ft, IEC309
100A Plug
Line Cord, 6AWG, 6 ft, 8687 2,250 Both No No
IEC309 100A Plug
Expansion Rack, 8691 8,000 $189 Both No No
24-inch, 42U
Line Cord, 6AWG, 8694 500 Both No No
14 ft, No Plug
Line Cord, 8AWG, 8697 2,000 Both No No
14 ft, IEC309
30A Plug
Line Cord, 8AWG, 8698 1,500 Both No No
6 ft, IEC309
30A Plug
Quiet Touch Keyboard --
USB, Business Black
U.S. English, #103P 8800 100 Both Yes No
French, #189 8801 100 Both Yes No
Italian, #142 8802 100 Both Yes No
German/ 8803 100 Both Yes No
Austrian, #129
UK English, #166 8804 100 Both Yes No
Spanish, #172 8805 100 Both Yes No
Japanese, #194 8806 100 Both Yes No
Brazilian/ 8807 100 Both Yes No
Portuguese, #275
Canadian French, #058 8808 100 Both Yes No
Belgian/Dutch, #120 8810 100 Both Yes No
Swedish/Finnish, #153 8811 100 Both Yes No
Danish, #159 8812 100 Both Yes No
Bulgarian, #442 8813 100 Both Yes No
Swiss/French/ 8814 100 Both Yes No
German, #150F/G
Norwegian, #155 8816 100 Both Yes No
Dutch, #143 8817 100 Both Yes No
Portuguese, #163 8818 100 Both Yes No
Greek, #319 8819 100 Both Yes No
Hebrew, #212 8820 100 Both Yes No
Hungarian, #208 8821 100 Both Yes No
Polish, #214 8823 100 Both Yes No
Slovakian, #245 8825 100 Both Yes No
Czech, #243 8826 100 Both Yes No
Turkish, #179 8827 100 Both Yes No
LA Spanish, #171 8829 100 Both Yes No
Arabic, #238 8830 100 Both Yes No
Korean, #413 8833 100 Both Yes No
Chinese/U.S., #467 8834 100 Both Yes No
French Canadian, #445 8835 100 Both Yes No
Thai, #191 8836 100 Both Yes No
Russian, #443 8838 100 Both Yes No
Yugoslavian/Latin, #105 8839 100 Both Yes No
U.S. English 8840 100 Both Yes No
(EMEA), #103P
Initial/
Feature Purchase MES/ RP
Description number price Both CSU MES
Southern Hemisphere 9004 $0 Both Yes No
Designator for Monitors
Language Group Specify --
U.S. English 9300 NC Initial
Dutch 9700 NC Initial
French 9703 NC Initial
German 9704 NC Initial
Polish 9705 NC Initial
Portuguese 9707 NC Initial
Spanish 9708 NC Initial
Italian 9711 NC Initial
Canadian French 9712 NC Initial
Japanese 9714 NC Initial
Traditional 9715 NC Initial
Chinese (Taiwan)
Korean 9716 NC Initial
Turkish 9718 NC Initial
Hungarian 9719 NC Initial
Slovakian 9720 NC Initial
Russian 9721 NC Initial
Simplified 9722 NC Initial
Chinese (PRC)
Czech 9724 NC Initial
Romanian 9725 NC Initial
Slovenian 9727 NC Initial
The following are features newly announced for the IBM eServer 9117 machine type:
Initial/
Feature Purchase MES/ RP
Description number price Both CSU MES
Machine type/model 9117-570
i5/OS Partition 0267 $ 0 Both Yes No
Specify
i5/OS Version 0530 NC Initial
V5R3 Specify
ServiceSuite and ServiceElect (formerly ESA) maintenance: For ServiceSuite and ServiceElect Maintenance Service charges, contact IBM Global Services at 888-IBM-4343 (426-4343).
Model conversion purchase prices
From To Model conversion Model Model purchase price(5) 9119-590 9119-595 $104,000
- 5
- Parts removed or replaced become the property of IBM and must be returned.
Feature conversion purchase price
Feature conversions during 9119-590 to 9119-595 model conversion: Parts removed or replaced become the property of IBM and must be returned.
Feature conversions for miscellaneous features
Return Purchase
From FC: To FC: parts price
7839 -- On/Off Processor 7971 -- On/Off Processor No $ 0
Enablement for #7981 Enablement for #7813
7839 -- On/Off Processor 7994 -- On/Off Processor No 0
Enablement for #7981 Enablement for #7988
7926 -- 30 Days Prepaid 7975 -- 30 Days Prepaid No 10,120
Reserve Capacity for Reserve Capacity for
#7981 #7813
7926 -- 30 Days Prepaid 7991 -- 30 Days Prepaid No 6,453
Reserve Capacity for Reserve Capacity for
#7981 #7988
7993 -- On/Off Processor 7972 -- On/Off Processor No 337
Billing for Feature #7981 Billing for Feature #7813
7993 -- On/Off Processor 7996 -- On/Off Processor No 215
Billing for Feature #7981 Billing for CoD for
Feature #7988
Feature conversions for processor features
Return Purchase
From FC: To FC: parts price
7925 -- Activation, #7981 7815 -- Activation, #7813 No $15,600
CUoD Processor Book, One CUoD Processor Book, One
Processor Processor
7925 -- Activation, #7981 7990 -- Activation, #7988 No 4,600
CUoD Processor Book, One CUoD Processor Book, One
Processor Processor
7981 -- 16-Way POWER5 7813 -- 16-Way POWER5 Yes 61,600
Standard CUoD Processor Turbo CUoD Processor
Book, 0-Way Active Book, 0-Way Active
7981 -- 16-Way POWER5 7988 -- 16-Way POWER5 No 20,600
Standard CUoD Processor Standard CUoD Processor
Book, 0-Way Active Book, 0-Way Active
Feature conversions for 9119-595
Feature conversions for miscellaneous features
Return Purchase
From FC: To FC: parts price
7991 -- 30 Days Prepaid 7975 -- 30 Days Prepaid No $9,967
Reserve Capacity for Reserve Capacity for
#7988 #7813
7994 -- On/Off Processor 7971 -- On/Off Processor No 0
Enablement for #7988 Enablement for #7813
7996 -- On/Off Processor 7972 -- On/Off Processor No 332
Billing for CoD for Billing for Feature #7813
Feature #7988
Feature conversions for processor features
Return Purchase
From FC: To FC: parts price
7988 -- 16-Way POWER5 7813 -- 16-Way POWER5 Yes $88,300
Standard CUoD Processor Turbo CUoD Processor Book,
Book, 0-Way Active 0-Way Active
7990 -- Activation, #7988 7815 -- Activation, #7813 No 22,550
CUoD Processor Book, One CUoD Processor Book, One
Processor Processor
Feature conversions for rack-related features
Return Purchase
From feature number: To feature number: parts price
5794 -- I/O Drawer, 5791 -- I/O Drawer, No $24,500
20 Slots, 8 Disk Bays 20 Slots, 16 Disk Bays
IBM Global Financing: IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Offerings include financing for IT acquisition, including hardware, software, and services, both from IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit the Web at
IBM Global Financing offerings are provided through IBM Credit LLC in the United States and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice. Financing solutions from IBM Global Financing can help you stretch your budget and affordably acquire the new product. But beyond the initial acquisition, our end-to-end approach to IT management can also help keep your technologies current, reduce costs, minimize risk, and preserve your ability to make flexible equipment decisions throughout the entire technology life cycle. For more financing information, visit
Back to top
|
|
| Order now |
|
To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner.
To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).
Phone: 800-IBM-CALL (426-2255)
Fax: 800-2IBM-FAX (242-6329)
Internet: ibm_direct@vnet.ibm.com
Mail: IBM Americas Call Centers
Dept: IBM CALL, 11th Floor
105 Moatfield Drive
North York, Ontario
Canada M3B 3R1
Reference: RE001
The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.
Note: Shipments will begin after the planned availability date.
Trademarks
