IBM Tivoli Advanced Backup and Recovery for z/OS, V2.1 delivers reliable and accurate data backup, and helps identify data not backed up

IBM United States Software Announcement 208-274
September 30, 2008

 
 ENUS208-274.PDF (137KB)

Table of contents   Document options  
At a glance At a glance Publications Publications
Overview Overview Technical information Technical information
Key prerequisites Key prerequisites Ordering information Ordering information
Planned availability date Planned availability date Terms and conditions Terms and conditions
Description Description  IBM Electronic Services IBM Electronic Services
Program number Program number Prices Prices
Education support Education support Order now Order now
Offering Information Offering Information
 
Printable version Printable version

 
Top rule
At a glance
Bottom rule

Highlights of IBM® Tivoli® Advanced Backup and Recovery for z/OS®, V2.1:

  • Support for Tivoli Enterprise Portal (TEP)
  • Automated Critical Data Identification automatically helps identify critical input and output data sets
  • Aggregate Backup and Recovery Support (ABARS) Manager helps simplify the process of backing up data from disk, tape, and DFSMShsmtm migration without recall
  • Critical Backup Tracking/Inventory helps track and inventory backups
  • Product interface and publications are updated to reflect the IBM product name
  • Installation is simplified through use of a standard SMP/E installation and program directory
  • Components are no longer separately orderable but rather are part of a single priced, total solution

For ordering, contact your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at 800-IBM-CALL (Reference: LE001).


 
Back to topBack to top
 
Top rule
Overview
Bottom rule

IBM Tivoli Advanced Backup and Recovery for z/OS, V2.1 is designed to provide reliable and accurate backups and to help identify data that is not already backed up. In addition, it helps reduce costs associated with remote direct access storage device (DASD) replication by identifying critical data for replication and providing localized backup for recovery. When using Advanced Backup and Recovery for z/OS, V2.1, you can centralize and track backups, including IBM Tivoli Advanced Catalog Management for z/OS backups. This can help you quickly recover from local, unplanned outages or recover your z/OS environment off-site, saving crucial time and money.

V2.1 delivers support for Tivoli Enterprise Portal (TEP).


 
Back to topBack to top
 
Top rule
Key prerequisites
Bottom rule

Refer to the Software requirements section.


 
Back to topBack to top
 
Top rule
Planned availability date
Bottom rule

October 3, 2008


 
Back to topBack to top
 
Top rule
Description
Bottom rule

IBM Tivoli Advanced Backup and Recovery for z/OS, V2.1 offers flexibility and choice to automate manual, time-consuming tasks by helping to identify critical data assets, automate the backup of those assets, and provide a centralized inventory of backups, including IBM Tivoli Advanced Catalog Management for z/OS backups. These features can help you quickly recover from local, unplanned outages or recover your z/OS environment offsite, saving crucial time and money.

Key features of Advanced Backup and Recovery for z/OS, V2.1

Automated Critical Data Identification

Automated Critical Data Identification is an effective and powerful z/OS component that helps automate the task of identifying critical input and output data assets. Using information from an array of z/OS sources, such as job schedulers, job control language (JCL), and system management facilities (SMF) records, a list of the critical data assets used by the application can be automatically constructed each time the application executes. The critical file list can be used immediately to create a synchronized application backup. Also, the list is an important analysis tool for application developers that allows them to help identify application data for replication or remote mirroring.

The Automated Critical Data Identification component executes continuously to help identify data assets used by production batch applications, started tasks, and individual users. In addition, it delivers the following capabilities:

  • Automates a manual resource-intensive and error-prone task of identifying data assets for the purpose of disaster preparedness.
  • Helps free up application developers to work on business-critical projects.
  • Offers a wide range of customization facilities for your unique data center needs.
  • Helps you accurately identify data assets belonging to applications requiring DASD remote mirroring or replication to meet recovery time objectives.
  • Augments DASD remote mirroring or replication by helping to identify critical data assets on tape or in DFSMShsm migration.
  • Formats the list for immediate backup by ABARS Manager, DFDSS, Innovation's FDR and FDR/ABR, and Computer Associates' CA-Disk.

ABARS Manager

The ABARS Manager component helps simplify the process of backing up data from disk, tape, and DFSMShsm migration without recall by using a single data mover and intelligent automated features to help provide a backup and recovery system for critical application data. This component provides powerful extensions to the ABARS facility of DFSMShsm. When using ABARS Manager, you can create synchronized application backups for both local and off-site recovery, and recover applications, by criticality, at the recover site.

ABARS Manager automates and enhances ABARS processes to help you:

  • Create complete application backups, including disk, tape, and DFSMShsm migrated data sets needed for recovery.
  • Shorten backup windows and reduce cost by helping to eliminate redundant backups of data that hasn't changed.
  • Automate the backup of changed data in support of government and industry regulations and acts, such as the Sarbanes-Oxley Act.
  • Reduce or eliminate other backups, such as full-volume dumps, DFSMShsm automatic backup, or backups taken in batch processing.
  • Support local recovery with the Search for Data Set and Recovery feature, allowing single or selective data sets recovery, including tape and migrated data sets.
  • Access backup and recovery information and status through one centralized database using an easy and familiar interactive system productivity facility (ISPF) interface.
  • View the full activity log, all error messages, and a condensed status summary online, which helps make managing backups simple.
  • Obtain detailed data set information, including VTOC information with recovery capacity requirements, recovery tape volume serial (VOLSER), and other key planning and operational details.
  • Create customized backups using powerful SDSL language that supports over 30 criteria, including the ability to select data by means other than using the data set name.
  • Monitor ABACKUP and ARECOVER events, while they are executing, using the ABARS Monitor feature.
  • Ensure that you aren't missing data needed to process forward into weekly, monthly, quarterly, and annual cycles.
  • Recover from only the most current backup copy of every data set to help avoid processing errors caused by restoring from older backup copies.
  • Prepare catalogs for "empty" or "full" recovery at the recovery site using CATSCRUB.
  • Recover applications by criticality at the recovery site to help meet recovery time objectives for critical applications.

Critical Backup Tracking/Inventory

The Critical Backup Tracking/Inventory component helps track and inventory backups taken in a z/OS environment, including ABARS Manager and IBM Tivoli Advanced Catalog Management for z/OS backups, without Job Control Language (JCL) changes. This component helps track and manage DFSMShsm, Innovation's FDR and FDR/ABR, IDCAMS, DFSMShsm Incremental, and AUTODUMP. In addition, it helps track backups taken by applications during their batch processing, with utilities such as IEBGENER, IEBCOPY, and DFSORTtm. The inventory can provide visibility to almost all backups in the environment. Reporting helps provide proof that critical data has a backup and identify what is not backed up in your environment.

The Critical Backup Tracking/Inventory component provides backup tracking and reporting to help you:

  • Track and inventory all backups in the z/OS environment, including ABARS Manager and IBM Tivoli Advanced Catalog Management for z/OS backups.
  • Be resilient to outages and prepare for local or off-site recovery.
  • Find data assets and associated backups easily and restore data with an easy-to-use, familiar ISPF interface.
  • Identify what isn't backed up, so you can ensure that you are not missing critical data.
  • Identify which data sets are being backed up multiple times by more than one utility, so you can reduce the occurrence of redundant backups.
  • Eliminate the potential for back leveling more current data during restore.
  • Build restore JCL and restore data from the backup copy.

Integration with the IBM Tivoli Monitoring infrastructure through TEP

Advanced Backup and Recovery for z/OS, V2.1 integrates with the IBM Tivoli Monitoring V6.2 infrastructure components that enable it to supply TEP with key business performance metrics for enhanced visualization and correlation within new workspaces, as well as with other IBM Tivoli Monitoring V6.2 monitored systems. This integration delivers a single GUI though TEP, which is used by many IBM Tivoli monitoring and management products to help discover and investigate problems and take immediate corrective actions.

If you have not separately purchased a license to IBM Tivoli Monitoring V6.2, you can obtain the TEP-based function by acquiring a no-charge, limited use license to IBM Tivoli Monitoring Services on z/OS, V6.2 (5698-A79). This limited use license is subject to usage restriction on use of the various IBM Tivoli Monitoring V6.2 components, including without limitation, if you have obtained IBM Tivoli Monitoring V6.2 under a no-charge, limited use license.

You may not use:

  • Any IBM Tivoli Monitoring V6.2 operating systems agents, any IBM Tivoli Monitoring V6.2 monitoring agents, or the IBM Tivoli Monitoring Universal Agent unless you have purchased an appropriate IBM Tivoli Monitoring V6.2 program license.
  • The DE functionality of IBM Tivoli Monitoring V6.2 and IBM Tivoli Monitoring Services on z/OS, V6.2 in a z/OS environment unless you have purchased the appropriate IBM program license (such as IBM Tivoli OMEGAMON® DE on z/OS).

Refer to the IBM Tivoli Monitoring License Information document for terms applicable to these programs.

IBM Tivoli Service Management Center (SMCz) for System z®

SMCz is an IBM Service Management based methodology and unified product suite designed to increase the availability of business critical IT services as well as their stability. It focuses on helping you to more easily program, manage, and administer a mainframe, which is the most robust platform from which to run the business of the enterprise.

Among the many hard dollar business values it brings to your enterprise, SMCz:

  • Helps optimize productivity of IT personnel and increase end-user satisfaction
  • Aligns IT operations and the business objectives from a service assurance perspective
  • Aligns and supports the IT Infrastructure Library® (ITIL®) processes within your enterprise

SMCz solutions:

  • Provide the required visibility, control, and automation across the service, technical support, operations, security, and financial domains
    • Visibility: You have a single, integrated view of your critical applications on your mainframe, showing the linkages between IT assets and business applications.
    • Control: You can customize your view to support such functions as business services, services requests, finance, security, IT production, support, and operational control.
    • Automation: Based on your needs, SMCz combines process automation software such as IBM Tivoli Change and Configuration Management Database, IBM Tivoli Application Dependency Discovery Manager, IBM Tivoli Business Service Manager, and IBM Tivoli Service Request Manager.
  • Enable the transformation from a System z resource management focus to a centralized System z service management mode

One of the key components of SMCz is System z storage management software from IBM Tivoli. IBM Tivoli software provides a rich set of System z storage management solutions to help IT organizations address today's enterprise challenges. Organizations can benefit from a comprehensive System z storage management solution that bridges silos of people, technology, processes, and information with increased IT operational efficiency and effectiveness.

In addition to traditional ISPF, batch interfaces, or both, most System z storage management offerings use TEP to provide simplified graphical user interfaces that help IT staff, who are new to the platform, learn and execute operational tasks. TEP integrates many IBM offerings, creating synergy across the solution. TEP interfaces aggregate and combine performance and availability operational data from many sources, helping to reduce the time and skills needed to diagnose problems and take corrective actions.

You can leverage a new generation of workers in your organization as you grow and maintain System z skills. The System z storage solution helps you manage your disk and tape storage environments and hierarchical storage environments (including tapes) more efficiently and effectively. Key functions:

  • Helps prevent storage-related abends
  • Helps monitor workload inputs and outputs
  • Helps manage performance and availability of both online and offline storage subsystems
  • Helps ensure the health and efficiency of the IBM DFSMShsm environment
  • Provides backup and recovery
  • Checks health
  • Helps maintain the critical Integrated Catalog Facility (ICF) catalogs and Virtual Storage Access Method (VSAM) files
  • Shares tapes across sysplexes

The IBM System z storage management portfolio includes the following component products (refer to the Web site following the product name for product information).

IBM Tivoli OMEGAMON XE for Storage on z/OS

http://www.ibm.com/software/tivoli/products/omegamon-xe-storage/

IBM Tivoli Advanced Reporting for DFSMShsm

http://www.ibm.com/software/tivoli/products/adv-reporting/

IBM Tivoli Advanced Audit for DFSMShsm

http://www.ibm.com/systems/storage/software/toolkit/advaudit.html

IBM Tivoli Advanced Catalog Management for z/OS

http://www.ibm.com/systems/storage/software/toolkit/acm.html

IBM Tivoli Allocation Optimizer for z/OS

http://www.ibm.com/software/tivoli/products/allocation-optimizer-zos/

IBM Tivoli Tape Optimizer on z/OS

http://www-306.ibm.com/software/tivoli/products/tape-optimizer-zos/

IBM Tivoli Automated Tape Allocation Manager for z/OS

http://www-306.ibm.com/software/tivoli/products/automated-tape-alloc- mgr-zos/

IBM Tivoli Advanced Backup and Recovery for z/OS

http://www-306.ibm.com/software/tivoli/products/advanced-bkp-recovery -zos/index.html

Entitlement information

If you have the current offering listed in the table below, you are entitled to Advanced Backup and Recovery for z/OS, V2.1. You can move your use entitlements based on the current subscription and support pricing of the replacement offering. You must be current on maintenance to be eligible for move of use entitlements. If you are not current on maintenance, you will have to pay a get-current or maintenance reinstatement fee.

The use entitlement move is for the same capacity as currently licensed when moving to the replacement offering. You are entitled to use the software on the same systems that you are currently managing (for example, the MSU quantities will be adjusted where required).

For information on move of use entitlements, contact your IBM representative.

-----------------------------------------------------------------
|Existing entitlement           |Replacement entitlement        |
|-------------------------------|-------------------------------|
|License |S&S PID |Program      |License |S&S PID |Program      |
|PID     |        |description  |PID     |        |description  |
|--------+--------+-------------|--------+--------+-------------|
|5698-A94|5698-S93|IBM Tivoli   |5698-B17|5698-R17|IBM Tivoli   |
|        |        |Advanced     |        |        |Advanced     |
|        |        |Backup and   |        |        |Backup and   |
|        |        |Recovery for |        |        |Recovery for |
|        |        |z/OS, V1.1   |        |        |z/OS, V2.1   |
-----------------------------------------------------------------

Accessibility by people with disabilities

A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) containing details on accessibility compliance can be requested at

http://www.ibm.com/able/product_accessibility/index.html

Value Unit-based pricing

Value Unit pricing for eligible IBM System z IBM International Program License Agreement (IPLA) programs enables a lower cost of incremental growth and enterprise aggregation. Each System z IPLA product with Value Unit pricing has a single price per Value Unit and a conversion matrix, called Value Unit Exhibit, for converting from some designated measurement to Value Units. Most commonly, Millions of Service Units (MSUs) is the measurement designated by IBM to be converted to Value Units. Some other measurements are engines or messages. Since MSUs are the most common measurement, that measurement will be used for the remainder of this description.

Value Unit pricing offers price benefits for you. For each System z IPLA program with Value Unit pricing, the quantity of that program needed to satisfy applicable IBM terms and conditions is referred to as the required license capacity. Each of the various Value Unit Exhibits stipulate that the larger your required license capacity, the fewer Value Units per MSU you will need. Value Unit Exhibits are uniquely identified by a three digit code and referred to using the nomenclature VUExxx, where xxx is the three digit code.

Subsequent acquisitions of Value Unit priced programs offer additional price benefits. The quantity of each System z IPLA program that you have acquired is referred to as entitled license capacity. If you wish to grow your entitled license capacity for a System z IPLA program, the calculation to determine additional needed Value Units is based upon the number of Value Units already acquired.

For each System z IPLA program with Value Unit pricing, you should:

  • Determine the required license capacity, in MSUs
  • Aggregate the MSUs across the enterprise
  • Convert the total MSUs to Value Units, using the applicable Value Unit Exhibit
  • Multiply the price per Value Unit by the total number of Value Units to determine the total cost

To simplify conversion from the designated measurement to Value Units or vice-versa, use the Value Unit Converter Tool. For additional information or to obtain a copy of the Value Unit Converter Tool, visit the Value Unit Converter Tool Web site

http://ibm.com/zseries/swprice/vuctool

Note that Value Units of a given product cannot be exchanged, interchanged, or aggregated with Value Units of another product.

To determine the required license capacity for the System z IPLA program you selected, refer to the Terms and conditions section.


 
Back to topBack to top
 
Top rule
Program number
Bottom rule

Program
number    VRM  Program name
 
5698-B17  2.1  IBM Tivoli Advanced Backup and Recovery for z/OS

Product identification number

                    Subscription and
Program PID number  Support PID number
 
5698-B17            5698-R17
 

Business Partner information

If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld® ID and password are required (use IBM ID).

https://www.ibm.com/partnerworld/mem/sla.jsp?num=208-274

 
Back to topBack to top
 
Top rule
Education support
Bottom rule

Comprehensive education for IBM Tivoli products is offered through Worldwide Tivoli Education Delivery Services. A wide range of training options are available, including classes led by instructors, learning on demand, on-site training, and blended learning solutions.

For additional information, visit

http://www-306.ibm.com/software/tivoli/education/

 
Back to topBack to top
 
Top rule
Offering Information
Bottom rule

Product information is available via the Offering Information Web site

http://www.ibm.com/common/ssi

 
Back to topBack to top
 
Top rule
Publications
Bottom rule

The following hardcopy publications are shipped with the basic machine-readable material:

                                                   Order
Title                                              number
 
IBM Tivoli Advanced Backup and Recovery for        GI11-8886
z/OS, V2.1: Program Directory
IBM Tivoli Advanced Backup and Recovery for        GI11-8887
z/OS, V2.1: Quick Start Guide

The publications listed below can be downloaded from the following Web site after the planned availability date.

http://www-306.ibm.com/software/tivoli/library/
                                                   Order
Title                                              number
 
IBM Tivoli Advanced Backup and Recovery for z/OS,  SC23-9730
V2.1: User's Guide
IBM Tivoli Advanced Backup and Recovery for z/OS,  SC23-9731
V2.1: Messages Reference
IBM Tivoli Advanced Backup and Recovery for z/OS,  SC23-9732
V2.1: Monitoring Agent Planning and Configuration
Guide
IBM Tivoli Advanced Backup and Recovery for z/OS,  SC23-9733
V2.1: Monitoring Agent User Guide

The IBM Publications Center

http://www.ibm.com/shop/publications/order

The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided. Payment options for orders are via credit card (in the U.S.) or customer number for 20 countries. A large number of publications are available online in various file formats, and they can all be downloaded by all countries, free of charge.


 
Back to topBack to top
 
Top rule
Technical information
Bottom rule

Specified operating environment

Hardware requirements

Any machine capable of running z/OS V1.7, or later.

Software requirements

z/OS V1.7, or later.

To run the Tivoli Enterprise Monitoring Agent and its TEP interface, the following software is required:

  • IBM Tivoli Monitoring Services on z/OS, V6.2 or IBM Tivoli Monitoring V6.2
  • One of the following operating systems for the TEP interface:
    • Microsoft® Windows®
    • Linux®
    • UNIX®

The program's specifications and specified operating environment information may be found in documentation accompanying the program, if available, such as a README file, or other information published by IBM, such as an announcement letter. Documentation and other program content may be supplied only in the English language.

Planning information

Direct customer support

Direct customer support is provided by IBM Operational Support Services - SoftwareXcel. This fee service enhances your productivity by providing voice and electronic access into the IBM support organization. IBM Operational Support Services - SoftwareXcel helps answer questions pertaining to usage and suspected software defects for eligible products.

Installation and technical support is provided by Global Services. For more information call 800-IBM-4YOU (426-4968).

For technical support or assistance, contact your IBM representative or visit

http://www.ibm.com/support
Packaging

Advanced Backup and Recovery for z/OS, V2.1 is distributed with:

  • International Program License Agreement (Z125-3301)
  • License Information document (GI11-8137)
  • 3480 tape cartridge
  • Publications (refer to the Publications section)

Security, auditability, and control

Advanced Backup and Recovery for z/OS, V2.1 uses the security and auditability features of the operating system software. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communication facilities.

Software Services

IBM Software Services has the breadth, depth, and reach to manage your services needs. You can leverage the deep technical skills of our lab-based, software services team and the business consulting, project management, and infrastructure expertise of our IBM Global Services team. Also, we extend our IBM Software Services reach through IBM Business Partners to provide an extensive portfolio of capabilities. Together, we provide the global reach, intellectual capital, industry insight, and technology leadership to support a wide range of critical business needs.

To learn more about IBM Software Services or to contact a Software Services sales specialist, visit

http://www.ibm.com/software/sw-services/

IBM Tivoli Enhanced Value-Based Pricing

IBM Tivoli software products are priced using IBM Tivoli's Enhanced Value-Based Pricing. The Enhanced Value-Based Pricing system is based upon the IBM Tivoli Environment- Managed Licensing Model, which uses a managed-environment approach -- whereby price is determined by what is managed rather than the number and type of product components installed.

For example, all servers monitored with IBM Tivoli's monitoring product (IBM Tivoli Monitoring) require entitlements sufficient for those servers. Other Tivoli products may manage clients, client devices, agents, network nodes, users, or other items, and are licensed and priced accordingly.

Unlike typical systems management licensing models that require entitlements of specific software components to specific systems, the IBM Tivoli Environment-Managed Licensing Model provides the customer flexibility to deploy its IBM Tivoli software products within its environment in a manner that can address and respond to the customer's evolving architecture. That is, as the architecture of a customer's environment changes, the customer's implementation of IBM Tivoli software can be altered, as needed, without affecting the customer's license requirements (as long as the customer does not exceed its entitlements to the software).

Under Enhanced Value-Based Pricing, licensing and pricing of server-oriented applications are determined based upon the server's use in the customer's environment. Typically, such applications are licensed and priced in a manner that corresponds to each installed and activated processor of the server managed by the IBM Tivoli application to help correlate price to value while offering a simple solution.

For servers with physical or logical (sometimes called virtual) partitions, entitlements are required for all installed and activated processors on the server. For each IBM Tivoli application managing a clustered environment, licensing is based on the cumulative number of installed and activated processors on each server in the cluster.

Enhanced Value-Based Pricing recognizes the convergence of RISC and UNIX, and Microsoft Windows and Intel® technologies, in order to simplify your licensing requirements, and to provide a smoother, more scalable model. Pricing and licensing does not differentiate between non-System z server platforms or operating systems. For some products, this platform neutrality extends to System z and other host servers as well.

IBM Tivoli Enhanced Value-Based Pricing terminology definitions

IBM Integrated Facility for Linux (IFL)

This optional facility enables additional processing capacity exclusively for Linux workload, with no effect on the model designation of a System z or S/390® server. Consequently, executing Linux workload on the IFL will not, in most cases, result in any increased IBM software charges for z/OS, OS/390®, VM, VSE, or TPF operating systems and applications. There is, as indicated, a charge associated with the IFL, and there may also be a charge for applications that run on the IFL.

The IFL may be dedicated to a single Linux-mode logical partition or it may be shared by multiple Linux-mode logical partitions. Installations should note that the Linux workspace enabled by this facility will not support any of the traditional S/390 operating systems (OS/390, TPF, VSE, or VM). Only Linux applications or Linux operating in conjunction with the Virtual Image Facility, an environment that operates within a logical partition or in native S/390 mode and provides the capability to create multiple Linux images, are supported by IBM S/390 IFL.

Managed processor (charging under full capacity in the managed environment)

Charges are based on the active processors on the machines in the computing environment affiliated with the program rather than on the server where the program is run. The managed processors, which require PoEs, are defined in the License Information's program-unique terms.

Notes:

  1. IBM defines a physical processor in a computer as a functional unit that interprets and executes instructions. A physical processor consists of at least an instruction control unit and one or more arithmetic and logic units.
  2. Multicore technology allows two or more processors (commonly called cores) to be active on a single silicon chip. With multicore technology, IBM considers each core to be a physical processor. For example, in a dual-core chip, there are two physical processors residing on the single silicon chip.
  3. The program may not run on some or all of the processors for which PoEs are required by the program's valuation method.
  4. In the System z IFL environment, each IFL engine is considered a single physical processor.
  5. Threading, a technique that makes a single processor seem to perform as two or more, does not affect the count of physical processors.
  6. Where blade technology is employed, each blade is considered a separate server and charging is based upon the total number of processors on the blades with which the program is affiliated.
  7. Not all processors require the same number of Value Unit entitlements. To determine the number of Value Unit entitlements required, refer to the processor Value Unit conversion table on the Passport Advantage® Web site
    http://www.ibm.com/software/passportadvantage

Millions of Service Units (MSUs)

MSU is defined as millions of CPU service units per hour, which is the measure of capacity used to describe the computing power of the hardware processors on which S/390 or System z software runs. Processor MSU values are determined by the hardware vendor, IBM, or Software Compatible Vendors (SCVs).

For more detailed information about System z software pricing, go to

http://www-1.ibm.com/servers/eserver/zseries/library/refguides/sw_ pricing.html

Processor (per processor charging under full capacity)

In full capacity charging, PoE must be acquired for all activated processors (available for use) that are on the server where the program or a component of the program is run.

Notes:

  1. IBM defines a physical processor in a computer as a functional unit that interprets and executes instructions. A physical processor consists of at least an instruction control unit and one or more arithmetic and logic units.
  2. Multicore technology allows two or more processors (commonly called cores) to be active on a single silicon chip. With multicore technology, IBM considers each core to be a physical processor. For example, in a dual-core chip, there are two physical processors residing on the single silicon chip.
  3. In the System z IFL environment, each IFL engine is considered a single physical processor.
  4. Threading, a technique that makes a single processor seem to perform as two or more, does not affect the count of physical processors.
  5. Where blade technology is employed, each blade is considered a separate server and charging is based upon the total number of processors on the blade on which the program is run.
  6. When a server is shipped with six processors, but two of them are inactive, four processors are active for the customer.
  7. Not all processors require the same number of Value Unit entitlements. To determine the number of Value Unit entitlements required, refer to the processor value unit conversion table on the Passport Advantage Web site
    http://www.ibm.com/software/passportadvantage

Server

A server is a computer system that executes requested procedures, commands, or applications to one or more user or client devices over a network. A PoE must be obtained for each server on which the program or a component of the program is run or for each server managed by the program. Where blade technology is employed, each blade is considered a separate server.

Standby or backup systems

For programs running or resident on backup machines, IBM defines three types of situations: cold, warm and hot. In cold and warm situations, a separate entitlement for the copy on the backup machine is normally not required and typically no additional charge applies. In a hot backup situation, the customer needs to acquire other license or entitlements sufficient for that server. All programs running in backup mode must be solely under the customer's control, even if running at another enterprise's location.

As a practice, the following are definitions and allowable actions concerning the copy of the program used for backup purposes:

Cold: A copy of the program may reside, for backup purposes, on a machine as long as the program is not started. There is no additional charge for this copy.

Warm: A copy of the program may reside for backup purposes on a machine and is started, but is idling, and is not doing any work of any kind. There is no additional charge for this copy.

Hot: A copy of the program may reside for backup purposes on a machine, is started, and is doing work. The customer must acquire a license or entitlements for this copy and there will generally be an additional charge.

Doing work includes, for example, production, development, program maintenance, and testing. It also could include other activities such as mirroring of transactions, updating of files, synchronization of programs, data or other resources (for example, active linking with another machine, program, database or other resource, and so on), or any activity or configurations that would allow an active hot switch or other synchronized switch over between programs, databases, or other resources to occur.

In the case of a program or system configuration that is designed to support a high availability environment by using various techniques (for example, duplexing, mirroring of files, or transactions, maintaining a heartbeat, active linking with another machine, program, database, or other resource), the program is considered to be doing work in the hot situation and a license or entitlement must be purchased.

Value Units

A Value Unit is a pricing charge metric for program license entitlements that is based upon the quantity of a specific designated measurement used for a given program. Each program has a designated measurement. The most commonly used designated measurements are processor cores and MSUs. However, for select programs, there are other designated measurements such as servers, users, client devices, and messages. The number of Value Unit entitlements required for your specific implementation of the given program must be obtained from a conversion table associated with the program. You must obtain a PoE for the appropriate number of Value Unit entitlements for your implementation. The Value Unit entitlements of a given program cannot be exchanged, interchanged, or aggregated with Value Unit entitlements of another program.

Product and licensing Web sites

A complete list of IBM Tivoli products is available at

http://www.ibm.com/software/tivoli

IBM Tivoli product licensing documents are available at

http://www.ibm.com/software/tivoli/products/licensing.html

Pricing example

The following pricing example applies to IBM Tivoli Advanced Backup and Recovery for z/OS, V2.1.

System z server = one 1,500 MSU System z server

The product in this example employs Value Unit slope VUE007 (VUE = Value Unit Exhibit). The scales below are used to calculate the equivalent number of Value Units for a specified number of MSUs.

In the example below, if the customer has installed 1,500 MSUs, the applicable number of Value Units is:

MSUs                    Value Units/MSU         Value Units
 
Base      3             1.00                      3.00
Tier A    42             .45                     18.90
Tier B   130             .36                     46.80
Tier C   140             .27                     37.80
Tier D 1,185             .20                    237.00
Total  1,500                                    343.50

When calculating the total number of Value Units, the sum is rounded up to the next integer. In this example, the customer needs to license 344 Value Units in this example.

Value Units for non MSU-based S/390 processors:

System                         Value Units/System
 
MP3000 H30                      6
MP3000 H50                      8
MP3000 H70                     12
ESL Models                      2

Value Units for IBM 9672 processors are based upon the full capacity of these systems. This is applicable to all System z systems measured on MSU capacity. Information on MSU capacities can be found in the IBM System/370tm, System/390®, and System z Machine Exhibit, Z125-3901.


 
Back to topBack to top
 
Top rule
Ordering information
Bottom rule

The program in this announcement has Value Unit-Based pricing.

Program
number    Program name                         Value Unit exhibit
 
5698-B17  IBM Tivoli Advanced Backup and       VUE007
          and Recovery for z/OS, V2.1

For each System z IPLA program with Value Unit pricing, the quantity of that program needed to satisfy applicable IBM terms and conditions is referred to as the required license capacity. Your required license capacity is based upon the following factors:

  • The System z IPLA program you select
  • The applicable Value Unit Exhibit
  • The applicable terms
  • Whether your current mainframes are full-capacity or sub-capacity

Value Unit exhibit VUE007

            MSUs      MSUs
            minimum   maximum   Value Units/MSU
 
Base          1         3       1
Tier A        4        45       0.45
Tier B       46       175       0.36
Tier C      176       315       0.27
Tier D      316         +       0.2

Value Units for mainframes without MSU ratings:

Hardware     Value Units/machine
 
MP3000 H30    6
MP3000 H50    8
MP3000 H70   12
ESL models    2

Ordering z/OS through the Internet

ShopzSeries provides an easy way to plan and order your z/OS ServerPac or CBPDO. It will analyze your current installation, determine the correct product migration, and present your new configuration based on z/OS. Additional products can also be added to your order (including determination of whether all product requisites are satisfied). ShopzSeries is available in the U.S. and several countries in Europe. In countries where ShopzSeries is not available yet, contact your IBM representative (or IBM Business Partner) to handle your order via the traditional IBM ordering process. For more details and availability, visit the ShopzSeries Web site at

http://www14.software.ibm.com/webapp/ShopzSeries/ShopzSeries.jsp

New licensees

Orders for new licenses will be accepted now.

Shipment will begin on the planned availability date.

Basic license

Ordering information for 5698-xxx MSU-based System z offerings:

Translation from MSUs to Value Units
 
          MSUs             Value Units/MSU
Base        1-3            1.00
Tier A      4-45            .45
Tier B     46-175           .36
Tier C    176-315           .27
Tier D    316+              .20

To order, specify the program product number and the appropriate license or charge option. Also, specify the desired distribution medium. To suppress shipment of media, select the license-only option in CFSW.

Program name: IBM Tivoli Advanced Backup and Recovery for z/OS, V2.1
Program PID: 5698-B17
 
Entitlement                                License option/
identifier   Description                   Pricing metric
 
S01523J      IBM Tivoli Advanced Backup    Basic OTC, per Value Unit
             and Recovery for z/OS         Basic OTC, per MSU-day TUC
  
Orderable supply ID    Language                   Distribution medium
 
S01544W                English                    3480 tape cartridge
 
Subscription and Support PID: 5698-R17
 
Entitlement                          License option/
identifier   Description             Pricing metric
 
S0154V1      IBM Tivoli Advanced     Basic ASC, per Value Unit SW S&S
             Backup and Recovery     No charge, decline SW S&S
             z/OS                    Per MSU SW S&S registration
  
Orderable supply ID    Language                  Distribution medium
 
S0154J9                English                   Hardcopy publication

Subscription and Support

Subscription and Support must be ordered to receive voice technical support via telephone during normal business hours, and future releases and versions, at no additional charge. The capacity of Subscription and Support (for example, Value Units or number of processors) must be the same as the capacity ordered for the product licenses.

To order, specify the Subscription and Support program product number and the appropriate license or charge option.

IBM is also providing Subscription and Support for these products, via a separately purchased offering, under the terms of the IBM International Agreement for Acquisition of Software Maintenance (IAASM). This offering:

  • Includes and extends the support services provided in the base support to include technical support via telephone during normal business hours.
  • Entitles customers to future releases and versions, at no additional charge. Note that the customer is not entitled to new products.

When Subscription and Support is ordered, the charges will automatically renew annually unless cancelled by the customer.

Customized Offerings

Product deliverables are shipped only via Customized Offerings (for example, CBPDO, ServerPac, SystemPac®).

CBPDO and ServerPac are offered for Internet delivery, where ShopzSeries product ordering is available. Internet delivery of ServerPac may help improve automation and software delivery time. For more details on Internet delivery, refer to the ShopzSeries help information at

http://www.software.ibm.com/ShopzSeries

Media type for this software product is chosen during the Customized Offerings ordering process. Based on your customer environment, it is recommended that the highest possible density tape media is selected. Currently offered media types are:

  • CBPDOs - 3480, 3480 Compressed, 3490E, 3590, 3592*
  • ServerPacs - 3480, 3480 Compressed, 3490E, 3590, 3592*
  • SystemPacs - 3480, 3480 Compressed, 3490E, 3590, 3592*

*3592 is highest density media. Selecting 3592 will ship the fewest number of media.

Once a product becomes generally available, it will be included in the next ServerPac and SystemPac monthly update.

Production of software product orders will begin on the planned general availability date.

  • CBPDO shipments will begin one week after general availability.
  • ServerPac shipments will begin two weeks after inclusion in ServerPac.
  • SystemPac shipments will begin four weeks after inclusion in SystemPac due to additional customization, and data input verification.

 
Back to topBack to top
 
Top rule
Terms and conditions
Bottom rule

The information provided in this announcement letter is for reference and convenience purposes only. The terms and conditions that govern any transaction with IBM are contained in the applicable contract documents such as the IBM International Program License Agreement, IBM International Passport Advantage Agreement, and the IBM Agreement for Acquisition of Software Maintenance.

Licensing

IBM International Program License Agreement including the License Information document and Proof of Entitlement (PoE) govern your use of the program. PoEs are required for all authorized use.

Agreement for Acquisition of Software Maintenance

The following agreement applies for Software Subscription and Support (Software Maintenance) and does not require customer signatures:

  • IBM Agreement for Acquisition of Software Maintenance (Z125-6011)

This program is licensed under the IBM Program License Agreement (IPLA) and the associated Agreement for Acquisition of Software Maintenance, which provide for support with ongoing access to releases and versions of the program. This program has a one-time license charge for use of the program and an annual renewable charge for the enhanced support that includes telephone assistance (voice support for defects during normal business hours), as well as access to updates, releases, and versions of the program as long as support is in effect.

IBM System z Operational Support Services - SoftwareXcel is an option if you desire added services.

License Information form number

GI11-8137

The program's License Information will be available for review on the IBM Software License Agreement Web site

http://www.ibm.com/software/sla/sladb.nsf
Limited warranty applies

Yes

Limited warranty

IBM warrants that when the program is used in the specified operating environment, it will conform to its specifications. The warranty applies only to the unmodified portion of the program. IBM does not warrant uninterrupted or error-free operation of the program or that IBM will correct all program defects. You are responsible for the results obtained from the use of the program.

IBM provides you with access to IBM databases containing information on known program defects, defect corrections, restrictions, and bypasses at no additional charge. For further information, consult the IBM Software Support Handbook found at

http://www.ibm.com/support/handbook

IBM will maintain this information for at least one year after the original licensee acquires the program (warranty period).

Program support

Technical support of a program product will be available for a minimum of three years from the general availability date, as long as your Subscription and Support is in effect. Enhanced support, called Subscription and Support, includes telephone assistance, as well as access to updates, releases, and versions of the program as long as support is in effect. You will be notified, via announcement letter, of discontinuance of support with 12 months' notice. If you require additional technical support from IBM, including an extension of support beyond the discontinuance date, contact your IBM representative or IBM Business Partner. This extension may be available for a fee.

Money-back guarantee

If for any reason you are dissatisfied with the program and you are the original licensee, you may obtain a refund of the amount you paid for it, if within 30 days of your invoice date you return the program and its PoE to the party from whom you obtained it. If you downloaded the program, you may contact the party from whom you acquired it for instructions on how to obtain the refund.

For clarification, note that for programs acquired under any of IBM's On/Off Capacity on Demand (On/Off CoD) software offerings, this term does not apply since these offerings apply to programs already acquired and in use by you.

Authorization for use on home/portable computer

You may not copy and use this program on another computer without paying additional license fees.

Other terms
Volume orders (IVO)

No

IBM International Passport Advantage Agreement
Passport Advantage applies

No

Usage restriction

Yes. Usage is limited to the quantity of Value Units licensed.

For additional information, refer to the License Information document that is available on the IBM Software License Agreement Web site

http://www.ibm.com/software/sla/sladb.nsf
Software Subscription and Support (Software Maintenance) applies

No. For operating system software, the revised IBM Operational Support Services - SoftwareXcel offering will provide support for those operating systems and associated products that are not available with the Software Subscription and Support (Software Maintenance) offering.

This will ensure total support coverage for your enterprise needs, including IBM and selected non-IBM products. For complete lists of products supported under both the current and revised offering, visit

http://www.ibm.com/services/sl/products
IBM Operational Support Services - SoftwareXcel

Yes

System i Software Maintenance applies

No

Variable charges apply

No

Educational allowance available

Yes. A 15% education allowance applies to qualified education institution customers.

Sub-capacity terms and conditions

For each System z IPLA program with Value Unit pricing, the quantity of that program needed to satisfy applicable IBM terms and conditions is referred to as the required license capacity. Your required license capacity is based upon the following factors:

  • The System z IPLA program you select
  • The applicable Value Unit Exhibit
  • The applicable terms
  • Whether your current mainframes are full capacity or sub-capacity

For more information on the Value Unit Exhibit for the System z IPLA program you selected, refer to the Ordering information section.

Program
number      Program name           Terms
 
5698-B17   IBM Tivoli Advanced     z/OS-based
           Backup and Recovery
           for z/OS
Full-capacity mainframes

In cases where full capacity is applicable, the following terms apply.

Execution based, z/OS based, full machine based: The required capacity of a System z IPLA program with these terms equals the MSU-rated capacity of the machines where the System z IPLA program executes.

For more information on mainframe MSU-rated capacities, visit

http://www-1.ibm.com/servers/eserver/zseries/library/swpriceinfo/

Reference based: The required license capacity of a System z IPLA program with these terms equals the license capacity of the applicable monthly license charge (MLC) program. This MLC program is called the parent program.

Sub-capacity mainframes

In cases where sub-capacity is applicable, the following terms apply.

Execution based: The required capacity of a System z IPLA sub-capacity program with these terms equals the capacity of the LPARs where the System z IPLA program executes.

z/OS based: The required license capacity of a System z IPLA program with these terms equals the license capacity of z/OS (and z/OS.e) on the machines where the System z IPLA program executes.

Reference based: The required license capacity of a System z IPLA program with these terms equals the license capacity of the applicable monthly license charge (MLC) program. This MLC program is called the parent program.

Full-machine-based: The required license capacity of a System z IPLA program with full-machine-based terms equals the MSU-rated capacity of the machines where the System z IPLA program executes.

For more information on mainframe MSU-rated capacities, refer to the System/370, System/390, and System z Machine Exhibit (Z125-3901), or visit the Mainframes section of the System z Exhibits Web site

http://ibm.com/zseries/library/swpriceinfo/

For more information on sub-capacity System z IPLA terms and conditions, refer to Software Announcement 204-184, dated August 10, 2004.

For additional information for products with reference-based terms, System z IPLA sub-capacity programs with reference-based terms adds value to the parent program across the environment, regardless of where in the environment the System z IPLA program executes.

An environment is defined as either a single or stand-alone machine or a qualified Parallel Sysplex®. You may have one or more different environments across the enterprise. To determine the required license capacity for each System z IPLA program with referenced-based terms, each environment should be assessed separately.

When a System z IPLA sub-capacity program with reference-based terms is used in a qualified Parallel Sysplex environment, the required license capacity of the System z IPLA program must equal with the license capacity of the parent program across the Parallel Sysplex. Qualified Parallel Sysplex refers to one:

  • That meets the criteria defined in Hardware Announcement 198-001, dated January 13, 1998
  • Where MLC pricing is aggregated across the Sysplex
Sub-capacity eligibility

To be eligible for sub-capacity charging on select System z IPLA programs, you must first implement and comply with all terms of either sub-capacity Workload License Charges (WLC) or sub-capacity Entry Workload License Charges (EWLC). To implement sub-capacity WLC or EWLC, a machine must be System z (or equivalent). On that machine:

  • All instances of the OS/390 operating system must be migrated to the z/OS (or z/OS.e) operating systems
  • Any licenses for the OS/390 operating system must be discontinued
  • All instances of the z/OS operating (or z/OS.e) systems must be running in z/Architecture® (64-bit) mode

For that machine, you must create and submit a Sub-Capacity Report to IBM each month. Sub-Capacity Reports must be generated using the Sub-Capacity Reporting Tool (SCRT). For additional information or to obtain a copy of SCRT, visit the System z Software Pricing Web site

http://ibm.com/zseries/swprice

You must comply with all of the terms of the WLC or EWLC offering, whichever is applicable:

  • The complete terms and conditions of sub-capacity WLC are defined in the IBM Customer Agreement - Attachment for System z Workload License Charges (Z125-6516).
  • The complete terms and conditions for sub-capacity EWLC are defined in the IBM Customer Agreement - Attachment for IBM eServertm System z 890 and 800 License Charges (Z125-6587).

Additionally, you must sign and comply with the terms and conditions specified in the amendment to the IPLA contract - Amendment for IBM System z9® and eServer zSeries® Programs Sub-Capacity Pricing (Z125-6929). Once the amendment is signed, the terms in the amendment replace any and all previous System z IPLA sub-capacity terms and conditions.

Sub-capacity utilization determination

Sub-capacity utilization is determined based on the utilization of an eligible operating system and machine (for example, z/OS running in z/Architecture (64 bit) mode on a System z (or equivalent) server).

On/Off CoD

To be eligible for On/Off CoD pricing, you must be enabled for temporary capacity on the corresponding hardware, and the required contract, Attachment for Customer Initiated Upgrade and IBM eServer On/Off Capacity on Demand - Software (Z125-6611) must be signed prior to use.


 
Back to topBack to top
 
Top rule
IBM Electronic Services
Bottom rule

IBM has transformed its delivery of hardware and software support services to help you achieve higher system availability. Electronic Services is a Web-enabled solution that offers an exclusive, no-additional-charge enhancement to the service and support available for IBM servers. These services are designed to provide the opportunity for greater system availability with faster problem resolution and preemptive monitoring. Electronic Services comprises two separate, but complementary, elements: Electronic Services news page and Electronic Services Agent.

The Electronic Services news page is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems.

The Electronic Service Agenttm is no-additional-charge software that resides on your server. It monitors events and transmits system inventory information to IBM on a periodic, client-defined timetable. The Electronic Service Agent automatically reports hardware problems to IBM. Early knowledge about potential problems enables IBM to deliver proactive service that may result in higher system availability and performance. In addition, information collected through the Service Agent is made available to IBM service support representatives when they help answer your questions or diagnose problems. Installation and use of IBM Electronic Service Agent for problem reporting enables IBM to provide better support and service for your IBM server.

To learn how Electronic Services can work for you, visit

http://www.ibm.com/support/electronic

 
Back to topBack to top
 
Top rule
Prices
Bottom rule

Information on charges is available at Web site

http://www.ibm.com/support

In the Electronic tools category, select the option for Purchase/upgrade tools.


 
Back to topBack to top
 
Top rule
Order now
Bottom rule

To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner.

Identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).

Phone:      800-IBM-CALL (426-2255)
Fax:        800-2IBM-FAX (242-6329)
Internet:   callserv@ca.ibm.com
Mail:       IBM Teleweb Customer Support
            ibm.com® Sales Execution Center, Americas North
            3500 Steeles Ave. East, Tower 3/4
            Markham, Ontario
            Canada
            L3R 2Z1

Reference: LE001

The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.


Note: Shipments will begin after the planned availability date.
Trademarks

DFSMShsm, DFSORT, System/370, eServer and Electronic Service Agent are trademarks of IBM Corporation in the United States, other countries, or both.

IBM, Tivoli, z/OS, OMEGAMON, System z, PartnerWorld, S/390, OS/390, Passport Advantage, System/390, SystemPac, Parallel Sysplex, z/Architecture, System z9, zSeries and ibm.com are registered trademarks of IBM Corporation in the United States, other countries, or both.

IT Infrastructure Library is a registered trademark of the Central Computer and Telecommunications Agency, which is now part of the Office of Government Commerce.

ITIL is a registered trademark, and a registered community trademark of the Office of Government Commerce, and is registered in the U.S. Patent and Trademark Office.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States, other countries, or both.

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.

UNIX is a registered trademark of The Open Group in the United States and other countries.

Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at:

http://www.ibm.com/legal/us/en/

For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page

http://www.ibm.com/planetwide/us/

 

Back to topBack to top
 
Bottom grey rule
 
Printable version Printable version