IBM CSM for Linux Multiplatform V1.5 can help reduce system management costs with expanded cluster management capabilitiesIBM United States Software Announcement 205-293
November 8, 2005
|At a glance|
CSM is designed to offer a robust, powerful, and centralized way to manage a large number of IBM servers from a single point of control.
New with CSM for Linux Multiplatform V1.5:
- Support for selected new xSeries and BladeCenter hardware models
- Code and documentation enhancements to allow CSM to help install, configure, and monitor applications
- Full interoperability of all CSM supported combinations of CSM supported hardware and CSM supported operating systems
- Enhancements to dsh so that it scales better and runs faster
- Secondary Adapter Support enhancements to help you gather adapter information from cluster nodes and automatically configure those adapters as part of a node installation or update
- Additional pre-installation hardware control support
- Overall usability enhancements, including command enhancements, new command flags, and new probes
For ordering, contact:
Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at
Back to top
Cluster Systems Management (CSM) V1.5 is designed to help reduce the overall cost and complexity of IT management by simplifying the tasks of installing, configuring, operating, and maintaining clusters of servers or logical partitions (LPARs). CSM offers a single consistent interface for managing both AIX 5L and Linux nodes, with capabilities for remote parallel network installation, remote hardware control, distributed command execution, file collection and distribution, and cluster-wide monitoring capabilities. CSM V1.5 improvements include:
- Support for IBM BladeCenter® HS40 and LS20
- Enhancements to allow CSM to help install, configure, and monitor applications (specifically, GPFS, LoadLeveler®, Parallel Environment, ESSL, and Parallel ESSL).
- Ability to run IBM Web-based System Manager on a management server running CSM for Linux on POWER.
- Full interoperability of all combinations of CSM-supported hardware and operating systems.
- Enhancements to distributed command execution (dsh) so that it runs faster and can work with non-CSM node groups
Improvements for CSM for Linux installs, including:
- Optional use of HTTP to serve files during the installation of Linux
- Kernel updates during node installation
- Secondary adapter installation and configuration support
- Additional pre-installation hardware control, remote hardware inventory, and maintenance support, including enhanced BIOS flashing capabilities
V1.4 was the last release of CSM that included the Linux Cluster Support extension and support for
Back to top
Runs on SUSE and Red Hat Linux on IBM Cluster 1350, and on selected IBM xSeries®, BladeCenters, and 325 and 326
Back to top
|Planned availability dates|
- November 11, 2005: Electronic
- December 16, 2005: Physical media
Back to top
CSM V1.5.0 is designed to offer simple, low-cost management of distributed and clustered IBM servers. For organizations with both Linux and AIX 5L applications, a single CSM management console running on AIX 5L or Linux can provide management services to AIX® 5L and Linux clients in distributed and clustered configurations.
CSM is also a key element of the Cluster 1600 and Cluster 1350, platforms that are ideal for workload consolidation or for achieving high degrees of scalability and performance for applications that take advantage of clustered systems architectures. Primary examples are computational modeling in high-performance computing or multi-terabyte data warehouses in large corporations.
The CSM licensed products include:
- CSM for AIX 5L
- CSM for Linux on POWER
- CSM for Linux Multiplatform (xSeries, BladeCenters, e325, e326)
Release 1.5.0 includes the following support:
- New hardware support: IBM BladeCenter HS40 and LS20
Code and documentation enhancements to allow CSM to help install, configure, and monitor
applications. Specific code and documentation enhancements are available to help install and
monitor the following IBM applications:
- Parallel Environment
- Engineering and Scientific Subroutine Library (ESSL)
- Parallel ESSL
Web-based System Manager enhancements
IBM Web-based System Manager can now run on a management server running CSM for Linux on POWER. Also, the Web-based System Manager client can now be downloaded from a management server running CSM for Linux on POWER.
Full interoperability of all combinations of CSM-supported hardware and CSM-supported operating
systems. Any of the following can manage or be managed by any of the following:
- CSM-supported pSeries® machines running a CSM-supported version of AIX 5L
- CSM-supported pSeries machines running a CSM-supported version of RedHat
- CSM-supported pSeries machines running a CSM-supported version of SLES
- CSM-supported xSeries machines running a CSM-supported version of RedHat
- CSM-supported xSeries machines running a CSM-supported version of SLES
- CSM-supported iSeries machines running a CSM-supported version of AIX 5L
- CSM-supported iSeries machines running a CSM-supported version of RedHat
- CSM-supported iSeries machines running a CSM-supported version of SLES
- Enhancements to distributed command execution (dsh) so that it runs faster, and can work with NIM and IBM Director node groups.
Improvements for CSM installs
- You can optionally use HTTP instead of NFS to serve files during the installation of the Red Hat Linux or SUSE LINUX Enterprise Server operating system. CSM can automatically set up the Apache HTTP server on the install servers.
- Increased flexibility in the DHCP configuration. A new mkdhcp tool allows nodes, node ranges, networks, and subnets to be added or removed from the dhcpd.conf file. This also allows the installation of xSeries nodes that are not in the same subnet as their install server.
- A new sample script allows you to update the kernel of a node during installation.
- Improved performance of the following commands: installms, copycsmpkgs, csmsetupks, and csmsetupyast.
- Any number of nodes can now be specified with all CSM commands. The maximum command-line length previously limited the size of the node list.
Secondary adapter support
This release includes enhancements to its support for secondary adapter configurations. CSM now helps you gather adapter information from cluster nodes and automatically configures those adapters as part of a node installation or update. Secondary adapters are any network adapters other than the adapter that is used to install the node over a network. The new CSM support is provided for both AIX and Linux nodes through the "updatenode -c" command. On AIX nodes, CSM supports the configuration of Ethernet, HPS (switch), and Multilink adapters. On Linux nodes, CSM supports the configuration of Ethernet adapters.
Remote hardware inventory and maintenance support
This release includes the following support:
- The new rfwscan command provides the same function for x-86-based based xSeries and servers as the existing scanbios command, with enhancements that allow scanning of these systems in a pre-operating system (pre-OS) environment.
- The rfwflash command has been enhanced to enable BIOS flashing for x-86-based xSeries and servers in a pre-OS environment.
- You can now use the update packages found on the Update Xpress Linux Server Update CDs (including the JS20 BladeServer package).
- The rfwcfg command has been enhanced to provide pre-OS environment support for x-86 based xSeries and servers. Also, an updated version of the Advanced Settings Utility, V1.4.0, is now used to perform the CMOS configuration on the target systems.
This release includes the following usability improvements:
- The rpower command has been enhanced as follows.
- The new state operand displays a textual representation of the current power state of the node.
- The new -f (force) flag of the query operand forces a poll, bypassing (and refreshing) the event cache.
- The -m (mode) flag of the cec_on operand is now optional. Also, the new standby and autostart modes are available for POWER5 systems only. (For POWER4 systems: If you do not specify a mode, the current mode is used. For POWER5 systems: If you do not specify a mode, a default of autostart is used.)
- The cfmupdatenode command now distributes files and directories alphabetically sorted by name, which allows you to know the running order of each .pre and .post script.
- The new-force flag of the cfmupdatenode command forces the distribution of files and ignores return code values from .pre and .post scripts.
- The nodeset command has three new flags which allow you to choose a boot kernel file, a ramdisk file, or a template of the PXE configuration file, instead of those provided by CSM.
- The new -nosms flag of the -installnode command allows you to skip SMS after the installation of the operating system has completed.
- The definenode command now allows you to define a nested node definition file (a node definition file within another node definition file).
- The lshwstat command now writes the HWSerialNum attribute of related nodes to the CSM database.
- The rmnode command and the -D flag of the nodegrp command now remove all traces of the node from the management server and the install server.
- You can now automate detecting, defining, and installing a node into a CSM cluster. This function is referred to as provisioning a node. CSM provides a sample script to give you an example of how to provision a node based on a predefined node profile.
- The CSM probe ibm.csm.ms has been enhanced to verify that CSM directories are created and have the correct permissions.
- A new ibm.csm.monitor probe allows you to check whether the monitoring system (ERRM on the management server and SensorRM on the nodes) is working correctly.
- The -f flag of the definenode command now allows the use of the equal sign (=) inside attribute values.
High Availability Management Server (HA MS)
On all platforms, the optional CSM HA MS is designed to prevent the management server from being a single point of failure in the CSM cluster. CSM HA MS uses a shared disk to store the CSM management server's data and requires a backup management server with a similar configuration to the primary management server. CSM HA MS is designed to automate failover in response to failure conditions. Failover can also be triggered by the administrator in order to create maintenance windows.
Setting up CSM HA MS can be done at any time during the life of the cluster. While CSM HA MS is expected to only failover CSM management server functionality, you can define pre- and post-scripts to customize the failover. This can allow you to failover other subsystems or data as needed.
For additional information on CSM, refer to the following Web sites:
- For documentation
- For CSM Software and FAQs
Accessibility by people with disabilities
The following features support use by people with disabilities:
- Operation by keyboard alone
- Optional font enlargement and high-contrast display settings
Back to top
CSM for AIX 5L and Linux offers a way to manage a collection of AIX or Linux servers (nodes) from a single-point-of-control.
Why should you use CSM?
- May help reduce management costs
- Consolidate workloads
- May help reduce complexity
- May help improve asset utilization
- May help lower total cost of ownership
- For Business Intelligence clusters greater than one node
Functions include automated setup, hardware control, monitoring, and configuration file management. Administrators can manage individual nodes, run commands across nodes or groups of nodes, monitor system resources, and run automated responses to events. CSM is designed to exploit the advanced hardware management features of the servers in the Cluster 1600 or Cluster 1350, or a cluster of xSeries servers.
CSM includes technology derived from IBM Parallel System Support Programs (PSSP) for AIX and is positioned as a replacement offering to PSSP. It is aimed at customers who want robust cluster systems management on an AIX 5L or open, Intel-based server platform. CSM and the IBM Cluster 1600 or Cluster 1350 are ideal for high-performance and commercial computing workloads, including applications in scientific and technical computing, life sciences, and e-business infrastructure (for example, Web serving and collaboration/e-mail).
CSM delivers a robust, scalable management platform to help make administration easier. It may help reduce life cycle costs. Customers can manage their AIX 5L or Linux servers from a central location, rather than having to manage each system individually.
Customers can scale their systems incrementally as workload demand increases, without increasing the management complexity.
Customers may be able to benefit from IBM's established leadership in supercomputing systems because the technology and experienced skills from the SP and AIX platforms are being leveraged on Linux. Customers may be more willing to adopt Linux in a production environment when it is backed by superior management software.
CSM HA MS is positioned for the customer who needs a highly available management server. CSM HA MS is designed to remove the management server as a single point of failure from the cluster.
Back to top
|Software key management|
The base CSM programs use an access/usage protection method that requires a password key to enable the software function. The key is contained in a file on the product medium and must be installed per the installation instructions.
The optional High Availability Management Server (HA MS) feature requires a separate order and uses an access/usage protection key which is contained in a file on the HA MS media and must be installed per the HA MS installation instructions.
CSM V1.5.0 is a replacement for all levels of CSM 1.4. Existing customers of CSM 1.4 may use their existing key file. No changes are required to use CSM V1.5.0. Existing customers of CSM for Linux should refresh their CSM media supply.
Try & Buy
You can experience the power and value of CSM and clustering at no charge for 60 days under the Try & Buy option. You can use all functions of CSM for those 60 days under the IBM International License Agreement for Evaluation of Programs (ILAE), after which CSM will no longer function. Whenever you purchase and receive a full production license and key for CSM (refer to the Ordering information section) and accept its IPLA License Agreement, you may use CSM for production purposes. CSM configuration data stored during Try & Buy will remain available for later production use.
HA MS is not included in the Try & Buy package.
The CSM Try & Buy image will be CSM V1.4 until CSM V1.5 is available.
Download CSM for Linux Multiplatform V1.5.0 for Try & Buy from
Click "CSM for Linux Multiplatform V1.5.0", then simply run
/opt/csm/bin/csmconfig -L and accept the 60-day IBM ILAE, which will be
presented for your acceptance.
Back to top
Product information is available via the Offering Information Web site
Also, visit the Passport Advantage® Web site
Back to top
The following softcopy publications are available for CSM:
AIX 5L and Linux Multiplatform or POWER:
Order Title number CSM for AIX 5L and Linux SA23-1343 Administration Guide CSM for AIX 5L and Linux SA23-1344 Planning and Installation Guide CSM for AIX 5L and Linux SA23-1345 Command and Technical Reference RSCT*: Administration Guide SA22-7889 RSCT: Messages GA22-7891 RSCT for AIX 5L: Technical Reference SA22-7890 RSCT for Linux Technical Reference SA22-7893
- Reliable Scalable Cluster Technology. This function is included in the AIX® operating system. For more information on the RSCT function, refer to Software Announcement 202-270 , dated October 8, 2002.
Publications available from the Web
Upon program availability, all publications listed in the previous section will be available for download in PDF format from the IBM Publications Center and the IBM Publications Center and the IBM Cluster Info Center at
The IBM Publications Center
The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided. Payment options for orders are via credit card (in the U.S.) or customer number for 50 countries. A large number of publications are available online in various file formats, and they can all be downloaded by all countries free of charge.
Specified operating environment
CSM for Linux Multiplatform
CSM for Linux Multiplatform is a key element of the IBM Cluster 1350 platform for deploying Linux applications requiring a cluster.
Hardware supported (for full hardware control operations):
- IBM 325 and 326
- IBM xSeries® 335, 336, 345, 346, 360, 445
- IBM BladeCenter® 8677 HS20 (models 8678, 8832 and 8843), HS40, and LS20 servers
Refer to related hardware announcements for more details.
The following hardware and hardware specifications are required for CSM V1.5.0 for Linux Multiplatform:
On the CSM management server:
- One Ethernet adapter for each management virtual LAN (VLAN) used for hardware control
One Ethernet adapter for each cluster VLAN used for CSM installation and administration
Note: A Management VLAN is the VLAN that connects the management server to the terminal servers and the RSA PCIs, or hardware control points.
- Additional disk space on the management server for the Linux operating system and RPMs
- A minimum of 512 MB of memory and 250 MB of disk space to install CSM
- 2.0 GB of disk space for each version of Linux to be fully installed on the nodes
On each managed node:
- A minimum of 256 MB of memory and 40 MB of disk space to install and run CSM
- Additional disk space for the Linux operating system and RPMs
- TCP/IP and a minimum of one PXE-enabled network adapter for the cluster VLAN used for CSM installation and administration
- Appropriate cabling
For CSM V1.5.0 optional hardware control to function properly, the following hardware and hardware specifications are required:
One RSA PCI adapter for every 24 nodes
Note: RSA PCI adapters are not required to manage the following hardware:
- eServer® HS20 or HS40 blade servers
- eServer 325 or 326 servers
- xSeries 336 or xSeries 346 servers
Optionally, if remote console support is desired, one or more of the following terminal servers may
- Cyclades AlterPath ACS48
- Avocent CPS1600
- Computone IntelliServer RCM8, RCM24, or RCM48
- Equinox ELS-16 II
- MRV iTouch IR-8020, IR-8040, LX-4016, LX-4008, or LX-4032
A terminal server is not required for remote console support of xSeries 336 or xSeries 346 servers. These servers support Serial-Over-LAN and will allow remote console access directly from the CSM management server.
In addition, the following blade servers do not require a terminal server for remote console support:
- HS20 8832
- HS20 8843
- HS40 8839
- JS20 8842
- LS20 8850
Note: For xSeries and IntelliStations, if you do not have remote console support, automatic MAC address collection will not work for the full installation of Linux nodes.
For specific hardware control point and console server product details, refer to the documentation shipped with the hardware.
IBM suggests a networking configuration where each terminal server is connected to the management VLAN through its Ethernet port, and up to 48 nodes (depending on the terminal server type) through the nodes' serial or COM ports. IBM suggests that each IBM RSA PCI be connected to the management VLAN through its Ethernet port. However, to conserve IP addresses, one IBM RSA PCI could be connected to the management VLAN with up to 24 management processors daisy-chained from it to the management VLAN. For security considerations, CSM cluster hardware control functions must be restricted to users with root access by isolating the management server network.
Note: Certain configurations, including other Intel processor-based servers and other Linux distributions, may be requested by special bid.
To install SUSE nodes from a Red Hat management server or to install Red Hat nodes from a SUSE management server, a separate install server must be installed and configured with the target operating system that will be installed on those nodes. To install AIX 5L nodes from a Linux management server, a separate AIX 5L install server must be installed and configured.
CSM for Linux Multiplatform HA MS
CSM HA MS requires two management servers (a primary and a backup) with similar hardware
configurations. HA MS supports any supported CSM management server that has proper adapters for
connectivity to a shared disk. CSM HA MS also requires a shared disk connected to both management
servers, and supports the following shared disk hardware models. Refer to the IBM TotalStorage®
DS4000 series documentation for the list of operating systems that these disks support.
xSeries Linux management server:
- IBM TotalStorage DS4300 (formerly FAStT600)
- IBM TotalStorage DS4400 (formerly FAStT700)
- IBM TotalStorage DS4500 (formerly FAStT900)
- xSeries Linux management server:
CSM for Linux Multiplatform
- The default base versions of SUSE LINUX Enterprise Server (SLES) 9 for x86 architecture on xSeries, and BladeCenter or x86 (64-bit) architecture on , as distributed and supported by SUSE LINUX
- The default base versions of Red Hat Linux EL 3 or EL 4 (AS/ES/WS) for x86 architecture on xSeries, and BladeCenter or x86 (64-bit) architecture on , as distributed and supported by Red Hat
The CSM management server must be at the highest level of CSM in the cluster.
The following additional non-IBM software is required with SLES 9:
perl-XML-RegExp. It is available at
For your convenience, the following required IBM and non-IBM software is included on the CD-ROM:
- tftp-HPA 0.34-1
- conserver 8.1
- fping 2.4b2-5
- syslinux 1.64
- IBMJava2-JRE 1.4.2
Note: The distribution of syslinux includes the source code and associated documentation. All copyright notices and license terms and conditions in the documentation must be adhered to. You can find version and distribution information for this product that is part of your selected installation options in the Cluster Systems Management README file.
The following non-IBM software is required if a customer wants to perform the software maintenance installation and upgrade of non-CSM RPMs:
- AutoUpdate V4.3.4, or later levels, which maintain full backward compatibility
It can be obtained from
CSM High Availability Management Server (HA MS) feature
CSM HA MS supports the following operating systems:
- Red Hat EL 3 (AS/ES/WS)
- Red Hat EL 4 (AS/ES/WS)
- SUSE Linux 9
Note: The shared disks supported by HA MS do not always support the above operating systems. Use of HA MS is restricted to operating systems supported by the chosen shared disk.
CSM HA MS also requires that CSM V1.5 be installed on both management servers. CSM HA MS does not require the installation of any other HA product. All required software is included in CSM and HA MS.
Service for CSM for AIX and Linux can be obtained at
- CSM for Linux Multiplatform V1.5.0 is a functional enhancement and replacement of CSM for Linux Multiplatform V1.4.
CSM requires that the CSM administrative network be an Ethernet network. However, CSM can tolerate any network architecture as a secondary network to the cluster.
Limitations Scaling limitations
Your CSM cluster must adhere to all of the following applicable limits. Your cluster size limit will be the smallest number of all applicable limits. Support for clusters above such limits will be considered via Special Bid.
Maximum number of operating system images:
- For supported xSeries based Linux systems, the cluster scaling limit is 1024 operating system images.
- For mixed cluster containing AIX 5L or Linux on POWER, additional limitations apply. Refer to Software Announcement 205-292 , dated November 8, 2005.
- The management server needs to be at the highest CSM level of any node in the cluster.
- There is limited hardware control support for the x440.
- Professional versions of Linux are not supported with CSM V1.5.
- For xSeries, if you do not have a terminal server, the remote console function (rconsole) will not work and automatic MAC address collection will not work for the full installation of Linux nodes.
Note: Technical support applies only to the IBM licensed products mentioned previously. If these products are running on an operating system (or with a corequisite, prerequisite product) that is no longer supported, IBM technical support may be limited to defects that can be replicated on supported environments (that is, supported versions of the operating systems).
Additional information is available at
CSM Planning information is provided in the CSM Planning and Installation Guides (for AIX 5L: SA22-7919, for Linux: SA22-7853), and in the CSM Hardware Control Guides (for AIX 5L: SA22-7920, for Linux: SA22-7856).
Packaging: Cluster Systems Management for Linux Multiplatform is shipped under high-level identifier 5765-E88. A license key file is required to execute Cluster Systems Management for Linux Multiplatform. The license key file is obtained by ordering the high-level identifier 5765-E88.
Note: 5765-E88 is orderable only via Passport Advantage part numbers.
The 5765-E88 package includes:
- CD-ROM containing CSM V1.5.0 software and license use key file
- IBM Agreement for Acquisition of Support (Z125-6011)
- Addendum for Support (Software Maintenance) for Select iSeries and pSeries® Programs (Z125-6495)
CSM HA MS is an optional, separately ordered priced feature and CD-ROM.
The CSM HA MS package includes:
- CD-ROM containing CSM HA MS software and License Use Key file
- IBM Agreement for Acquisition of Support (Z125-6011)
- Addendum for Support (Software Maintenance) for Select iSeries and pSeries Programs (Z125-6495)
This program when downloaded from a Web site, contains the applicable IBM license agreement, and License Information (LI), if appropriate, and will be presented for acceptance at the time of installation of the program. The license and LI will be stored in a directory such as LICENSE.TXT for future reference.
Security, auditability, and control
CSM for Linux uses the security and auditability features of the Linux operating system.
The customer is responsible for evaluation, selection, and implementation of security features,
administrative procedures, and appropriate controls in application systems and communication
Back to top
This product is only available via Passport Advantage. It is not available as shrinkwrap.
Product Group: Cluster Software
- Product Identifier Description (PID)
- IBM CSM for Linux Multiplatform V1.5 (5765E88)
Product Category: Systems Software
Part number or Program name PID number Charge metric CSM for Linux 5765-E88 Per Processor
All CSM products and their HA MS features on all platforms are each individual products with one charge unit: processor. The order quantity is the integer number of processors on which CSM or HA MS will be run, or to which CSM Remote Hardware Control commands will be issued.
Note: Ordering and billing is per physical processor, regardless of processor sharing ("sub-cpu LPARs").
A license key file is required to execute CSM and will be sent with the product order.
Existing CSM customers
CSM V1.5.0 is a replacement for CSM V1.4. Existing customers with active SWMA contracts are entitled to receive V1.5, should refresh their CSM media supply, and may use their existing 5765-E88 license key file. No key file changes are required to use CSM V1.5.0.
Note: CSM for Linux Multiplatform is orderable only via Passport Advantage.
CSM is installed once per instance of parent operating system on any server. One CSM management server is required per CSM cluster (refer to the Software requirements section). For example, if ordering CSM for three machines (a 4-way, an 8-way, and a 16-way), order three licenses with the respective quantities each (for a total quantity of 28). The block of 250 processors feature number is provided for convenience with large orders.
CSM HA MS must be ordered separately. On all platforms, base CSM is a prerequisite.
Software Maintenance for CSM and its optional feature should be ordered individually in a quantity equal to the sum of the number of processors on which CSM V1 or HA MS, respectively, will be installed and run.
New customers must order CSM V1.5.0 and, optionally, HA MS.
Important license information
This Program is eligible for sub-capacity pricing, usage and billing. Terms and conditions are detailed in the product license information document.
The required authorized use level for eligible Programs is based upon the highest utilization of the partitions where the Program or a component of the Program, executes. Customer agrees to periodically report Program use to IBM using an IBM license management tool.
The number of authorizations you must acquire is the smaller value of either of the following
- The total number of activated (available for use) processors in the machine, or
The sum of (i) and (ii) as follows (any remaining fraction of a processor must be rounded up to a
full processor in the final aggregation)
(i) When the Program is run in partitions with dedicated processors, the sum of the Processing Units of those partitions, and
(ii) When the Program is run in partitions that are members of a Shared Processing Pool, the smaller of:
- The number of processors assigned to the pool, or
- The sum of the Virtual Processors of each Uncapped Partition plus the Processing Units in each Capped Partition running a Program.
There is no change to the base billing features for CSM V1.
Passport Advantage customer: Media pack entitlement details
Customers with active maintenance or subscription for the products listed are entitled to receive the corresponding media pack.
Entitled maintenance offerings description
- IBM CSM V1.5 for Linux Multiplatform base
- IBM CSM V1.5 for Linux Multiplatform HA MS
Part Media packs description number IBM CSM V1.5 base Media Package BH02QIE for Linux Multiplatform English IBM CSM V1.5 HA MS Media Package BH02RIE for Linux Multiplatform English
Withdrawal of previous Passport Advantage part numbers: The following IPLA software part numbers are being replaced or obsoleted by this announcement. The effective withdrawal date is January 16, 2006.
Orders for these part numbers will not be accepted after the stated effective date of withdrawal, nor will normal marketing activities or educational support be available unless previous agreement exists between the customer and IBM.
Withdraw from marketing information
CSM V1.5 replaces CSM V1.4. CSM 1.4 will no longer be marketed after December 16, 2005.
The CSM for Linux Multiplatform Cryptographic utilities CD will no longer be offered.
The following orderable features are withdrawn effective 12/16/05:
Part Program name/description number IBM CSM V1.4 Crypto Package BH01SIE for Linux Multiplatform
New release information
Part Program name/description number IBM CSM V1.5 Media Package BH02QIE for Linux Multiplatform IBM CSM V1.5 HA MS Package BH02RIE for Linux Multiplatform
On/Off Capacity on Demand
Part Program name/description number CSM 1.5 Per processor day OOCoD D56RTLL for Linux Temp Use Charge
The base license billing features for CSM V1 are available for sub-capacity situations.
Sub-capacity license terms and conditions listed in the product License file apply.
Back to top
|Terms and conditions|
This product is only available via Passport Advantage. It is not available as shrinkwrap.
Licensing: IBM International Program License Agreement. Proofs of Entitlement (PoE) are required for all authorized use. Part number products only, offered outside of Passport Advantage, where applicable, are license only and do not include Software Maintenance.
This software license includes Software Maintenance, previously referred to as Software Subscription and Technical Support.
License information form number: L-RHAN-6EQP27
Limited warranty applies: Yes
Warranty: This program has warranty for a minimum of one year from acquisition from IBM or authorized IBM Business Partner. The warranty provided to the customer, for at least one year from acquisition, is access to databases (read Web sites) for program information and FAQs, including any known fixes to defects, which the customer can download or obtain otherwise and install at leisure.
Money-back guarantee: If for any reason you are dissatisfied with the Program and you are the original licensee, return it within 30 days from the invoice date, to the party (either IBM or its reseller) from whom you acquired it, for a refund. For clarification, note that (1) for Programs acquired under the IBM International Passport Advantage offering, this term applies only to your first acquisition of the Program and (2) for Programs acquired under any of IBM's On/Off Capacity on Demand (On/Off CoD) software offerings,this term does not apply since these offerings apply to Programs already acquired and in use by the customer.
Copy and use on home/portable computer: No
Volume orders (IVO): No
Passport Advantage applies
Yes and through the Passport Advantage Web site at
Software Maintenance applies: Yes
Software Maintenance, previously referred to as Software Subscription and Technical Support, is included in the Passport Advantage Agreement. Installation and technical support is provided by the Software Maintenance offering of the IBM International Passport Advantage Agreement. This fee service enhances customer productivity, with voice and electronic access into IBM support organizations.
IBM includes one year of Software Maintenance with the initial license acquisition of each program acquired. The initial period of Software Maintenance can be extended by the purchase of a renewal option that is available.
While your Software Maintenance is in effect, IBM provides you assistance for your routine, short duration installation and usage (how-to) questions; and code-related questions. IBM provides assistance via telephone and, if available, electronic access, only to your information systems (IS) technical support personnel during the normal business hours (published prime shift hours) of your IBM support center. (This assistance is not available to your end users.) IBM provides Severity 1 assistance 24 hours a day, every day of the year. For additional details, consult your IBM Software Support Guide at
Software Maintenance does not include assistance for the design and development of applications, your use of programs in other than their specified operating environment, or failures caused by products for which IBM is not responsible under this agreement.
For additional information about the Passport Advantage Agreement, visit the Passport Advantage Web site at
iSeries Software Maintenance applies: No
Variable charges apply: No
Educational allowance available: Not applicable
Sub-capacity pricing terms and conditions
To be eligible for Sub-Capacity Pricing, the machine on which the eligible products are installed and running must be eligible for Sub-Capacity pricing terms and conditions. Software pricing at less than full machine capacity for eligible products apply when running
- AIX 5L V5.1, or later, on an IBM pSeries 690 or equivalent partition capable operating system and machine
- OS/400® V5.1, or later, running on an IBM iSeries Server
- Linux running in an LPAR under AIX 5L V5.1, OS/400 V5.1, or in a partition on an equivalent partition capable operating system and Server
Sub-Capacity Pricing for eligible products is based on the current Program pricing methodology but the number of processors will be determined based on the sum of processors for all partitions where the Program is defined(used). To obtain pricing at less than full machine capacity for eligible products, you are required to:
- Install and use, when available, IBM's license use management program which installs with eligible IBM Programs.
- Install available updates to the operating system and eligible products such that license use can be accurately managed.
- If the use of Sub-Capacity Pricing terms results in a reduced requirement for entitlements, you can reallocate the entitlement difference by distributing entitlements across a larger or different set of systems, or reserve then for future growth. There will be no refunds for these "freed up" entitlements. Subscription, Software Maintenance and Support volumes and entitlements for existing contracts will continue at the same levels as the acquired licenses.
On/Off Capacity on Demand
To be eligible for On/Off Capacity on Demand pricing, customers must be enabled for temporary
capacity on the corresponding hardware, and the required contract Z125-6907, Amendment for
iSeries and pSeries Temporary Capacity On Demand Software must be signed prior to use.
Back to top
|IBM Electronic Services|
IBM Global Services has transformed its delivery of hardware and software support services to put you on the road to higher systems availability. IBM Electronic Services is a Web-enabled solution that provides you with an exclusive, no-additional-charge enhancement to the service and support on the IBM . You should benefit from greater system availability due to faster problem resolution and preemptive monitoring. IBM Electronic Services is comprised of two separate, but complementary, elements: IBM Electronic Services news page and IBM Electronic Service Agent.
IBM Electronic Services news page provides you with a single Internet entry point that replaces the multiple entry points traditionally used by customers to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems.
The IBM Electronic Service Agent is a no-additional-charge software that resides on your IBM system. It is designed to proactively monitor events and transmit system inventory information to IBM on a periodic, customer-defined timetable. The IBM Electronic Service Agent tracks system inventory, hardware error logs, and performance information. If the server is under a current IBM maintenance service agreement or within the IBM warranty period, the Service Agent automatically reports hardware problems to IBM. Early knowledge about potential problems enables IBM to provide proactive service that maintains higher system availability and performance. In addition, information collected through the Service Agent will be made available to IBM service support representatives when they are helping answer your questions or diagnosing problems.
To learn how IBM Electronic Services can work for you, visit
Back to top
For Passport Advantage information and charges, contact your IBM representative or authorized IBM Business Partner. Additional information is also available on the following Passport Advantage Web site
Back to top
To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner.
To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).
Phone: 800-IBM-CALL (426-2255) Fax: 800-2IBM-FAX (242-6329) Internet: firstname.lastname@example.org Mail: IBM Americas Call Centers Dept. Teleweb Customer Support, 9th floor 105 Moatfield Drive North York, Ontario Canada M3B 3R1 Reference: RE001
The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.
Note: Shipments will begin after the planned availability date.
Back to top