IBM System Storage DS8000 series (Machine type 2107) delivers new scalability and business continuity capabilities
IBM United States Hardware Announcement 109-119February 10, 2009
 ENUS109-119.PDF (109KB)
|
At a glance
|
| At a glance |
 |
New functional capabilities for the DS8000™ series (M/T 2107) include:
- 1 TB 7,200 rpm Serial ATA (SATA) Disk Drive
- Intelligent Write Caching
- Remote Pair FlashCopy®
For ordering, contact your IBM® representative, an IBM Business Partner, or IBM Americas Call Centers at 800-IBM-CALL (Reference: YE001).
Back to top
|
|
| Overview |
|
The IBM System Storage™ DS8000 series (M/T 2107) provides new functional capabilities, allowing clients to better choose the combination of price and efficiency that is right for their application needs. New options include:
- SATA drive support - Provides 1 TB 7,200 rpm SATA disk drives to support various fixed-content, data-archival, reference-data, and other applications that require large amounts of storage capacity at lower cost per MB. Supported RAID configurations are RAID-6 and RAID-10.
- Intelligent Write Caching - Provides non-volatile storage (NVS) and cache management algorithm improvement designed to increase aggregate throughput and reduce aggregate response times.
- Remote Pair FlashCopy - Provides management improvements for resiliency solutions. These improvements are designed to reduce the configuration steps required in a redundant environment utilizing Point-in-Time Copy and Metro Mirror.
Back to top
|
|
| Key prerequisites |
|
All features and functions in this announcement are supported on the IBM System Storage DS8000 series, and require DS8000 Licensed Machine Code (LMC) level 5.4.2xx.xx (bundle version 64.2.xx.xx), or later.
Back to top
|
|
| Planned availability date |
|
March 6, 2009
Refer to the Description section, Planned availability dates, for more information.
Back to top
|
|
| Description |
|
1 TB 7,200 rpm Serial ATA (SATA) drive sets
The DS8000 series now offers 1 TB 7,200 rpm SATA disk drive sets, providing additional price and capacity flexibility to address specific application and business requirements. The 1 TB 7,200 rpm SATA disk drives can be added to the DS8000 series models to support various fixed-content, data-archival, reference-data, and streaming applications that require large amounts of storage capacity at a low cost per MB. SATA drives are not intended for use in applications that require drive utilization duty cycles greater than 20%. In addition, SATA drives are supported only in RAID-6 and RAID-10 configurations. SATA drives will not share sparing capability with non-SATA drives. Due to the low duty cycle nature of SATA drives, SEFLC repository data is not supported on SATA drives.
The 1 TB 7,200 rpm SATA disk drives provide 50% more raw capacity than existing models, up to 1,024 TB for DS8300 Turbo Models and up to 384 TB for DS8100 Turbo Models. The 1 TB 7,200 rpm SATA disk drive sets are optional to the DS8000 series and are available with feature numbers 28xx. 1 TB 7,200 rpm SATA drives will be available under the standard Capacity on Demand offering.
Intelligent Write Caching
Write caches using fast, non-volatile storage are now widely used in modern storage controllers since they help minimize latency on writes. Effective algorithms for write cache management are extremely important since due to RAID architecture, one write can cause many disk seeks, and write cache capacity is limited for overall system performance considerations.
IBM Research conducts research into algorithms for cache management and overall system performance improvements. Intelligent Write Caching utilizes a newly developed algorithm for write management to boost performance through improving utilization of both temporal locality (data most recently modified), and spatial locality (data located physically together). To increase aggregate throughput and reduce aggregate response times, the IBM DS8000 series now provides enterprise storage controllers utilizing the Intelligent Write Caching algorithm.
Remote Pair FlashCopy
The IBM DS8000 provides the Remote Pair FlashCopy function with the capability to allow a FlashCopy relationship where the FlashCopy target device is a Metro Mirror primary device. This significantly reduces the recoverability time that exists when a FlashCopy background copy and Metro Mirror Resync are in progress. The Remote Pair FlashCopy provides a solution well-suited for data replication, data migration, remote copy, and disaster recovery tasks.
For business continuity, the Remote Pair FlashCopy operations are designed to be non-disruptive, allowing the primary device of each FlashCopy pair to remain available to all hosts for both read and write I/O operations. Once established, Remote Pair FlashCopy operations can continue unattended to support continuous data backup to the secondary device.
z/OS® support of Remote Pair FlashCopy will be available on z/OS V1.8, or later, using the name FlashCopy Preserve Mirror.
Planned availability dates
March 6, 2009
Field installation only:
- 1 TB 7,200 rpm Serial ATA (SATA) drive sets
- Intelligent Write Caching
April 24, 2009
Field installation only:
- Remote Pair FlashCopy
Accessibility by people with disabilities
A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) containing details on accessibility compliance can be requested at
Section 508 of the U.S. Rehabilitation Act
The IBM System Storage DS8100, IBM System Storage DS8300, and IBM System Storage DS8000 Expansion Unit are capable, as of December 3, 2004, when used in accordance with IBM's associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) can be requested via IBM's Web site at
Back to top
|
|
| Reference information |
|
For details, refer to the following announcements:
Hardware Announcement 106-642, dated August 22, 2006 (IBM System Storage DS8000 series provides new price/performance options)
Hardware Announcement 104-383, dated October 12, 2004 (IBM TotalStorage® DS8000 series - 2244 Function Authorizations)
Hardware Announcement 104-382, dated October 12, 2004 (IBM TotalStorage DS8000 Series - Setting new standards for on demand enterprise disk storage)
Hardware Announcement 109-120, dated February 10, 2009 (IBM System Storage DS8000 series (Machine types 2421, 2422, 2423, and 2424) delivers new security, scalability, and business continuity capabilities)
Back to top
|
|
| Product number |
|
Description Machine Model Feature System Storage DS8100 2107 921 Disk Drive Sets: - 1 TB 7.2K SATA Drive Set 2816 Standby CoD Disk Drive Sets: - 1 TB 7.2K SATA CoD Drive Set 2817 Description Machine Model Feature System Storage DS8300 2107 922 Disk Drive Sets: - 1 TB 7.2K SATA Drive Set 2816 Standby CoD Disk Drive Sets: - 1 TB 7.2K SATA CoD Drive Set 2817 Description Machine Model Feature System Storage DS8100 2107 931 Disk Drive Sets: - 1 TB 7.2K SATA Drive Set 2816 Standby CoD Disk Drive Sets: - 1 TB 7.2K SATA CoD Drive Set 2817 Description Machine Model Feature System Storage DS8300 2107 932 Disk Drive Sets: - 1 TB 7.2K SATA Drive Set 2816 Standby CoD Disk Drive Sets: - 1 TB 7.2K SATA CoD Drive Set 2817 Description Machine Model Feature System Storage DS8000 Expansion Unit 2107 92E Disk Drive Sets: - 1 TB 7.2K SATA Drive Set 2816 Standby CoD Disk Drive Sets: - 1 TB 7.2K SATA CoD Drive Set 2817 Description Machine Model Feature System Storage DS8300 2107 9A2 Disk Drive Sets: - 1 TB 7.2K SATA Drive Set A 2826 - 1 TB 7.2K SATA Drive Set B 2836 Standby CoD Disk Drive Sets: - 1 TB 7.2K SATA CoD Drive Set A 2827 - 1 TB 7.2K SATA CoD Drive Set B 2837 Description Machine Model Feature System Storage DS8300 2107 9B2 Disk Drive Sets: - 1 TB 7.2K SATA Drive Set A 2826 - 1 TB 7.2K SATA Drive Set B 2836 Standby CoD Disk Drive Sets: - 1 TB 7.2K SATA CoD Drive Set A 2827 - 1 TB 7.2K SATA CoD Drive Set B 2837 Description Machine Model Feature System Storage DS8000 Expansion Unit 2107 9AE Disk Drive Sets: - 1 TB 7.2K SATA Drive Set A 2826 - 1 TB 7.2K SATA Drive Set B 2836 Standby CoD Disk Drive Sets: - 1 TB 7.2K SATA CoD Drive Set A 2827 - 1 TB 7.2K SATA CoD Drive Set B 2837
Model Conversions (Machine type 2107) - None
There are no new model conversions with this announcement. This is a reminder that model conversions are disruptive. In addition, data may not be preserved during the model conversion.
Feature Conversions (Machine type 2107)
Disk Drive Sets: 1 TB SATA Drive Sets Feature Returned From To parts * Description 2816 2826 No Disk drive set conversion 2816 2836 No Disk drive set conversion 2826 2816 No Disk drive set conversion 2836 2816 No Disk drive set conversion
Standby CoD Disk Drive Sets: 1 TB SATA Drive Sets Feature Returned From To parts * Description 2817 2816 No CoD Disk drive set conversion 2817 2827 No CoD Disk drive set conversion 2817 2837 No CoD Disk drive set conversion 2827 2826 No CoD Disk drive set conversion 2827 2817 No CoD Disk drive set conversion 2837 2836 No CoD Disk drive set conversion 2837 2817 No CoD Disk drive set conversion
* Parts removed or replaced become the property of IBM and must be returned.
Business Partner information
If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID).
Back to top
|
|
| Publications |
|
The following publication has been updated to reflect this announcement and will be available by February 10, 2009.
Title Order number IBM System Storage DS8000 Introduction and Planning Guide GC35-0515
DS8000 publications are available at
Publications can be ordered from your IBM representative, by direct order, or through the Publications Center Web site at
The DS8000 information center is designed to provide comprehensive, browser-based information. It can help provide easy access to tasks, concepts, reference information, tutorials, code samples, scenarios, and other product information. It contains assistance for the tasks that users must perform and links to additional information.
To find information, users can search, browse the contents, use the index, follow links from one topic to related topics, and print the topics they want to read offline. The information center is available at
Back to top
|
|
| Services |
|
Global Technology Services
IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.
These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.
For details on available services, contact your IBM representative or visit
For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit
For details on education offerings related to specific products, visit
Select your country, and then select the product as the category.
Back to top
|
|
| Technical information |
|
Specified operating environment
Hardware requirements
Licensed Machine Code
All features and functions in this announcement are supported on the IBM System Storage DS8000 series and require DS8000 Licensed Machine Code (LMC) level 5.4.2xx.xx (bundle version 64.2.xx.xx), or later.
Some DS8000 series features and functions may not be available or supported in all environments. Current information on supported environments, prerequisites, and minimum operating systems levels is available at
Planning information
Customer responsibilities
Physical configuration planning
Physical configuration planning is a customer responsibility. Introductory information, including required and optional features, can be found in the IBM System Storage DS8000 Introduction and Planning Guide (GC35-0515).
Installation planning
Installation planning is a customer responsibility. Information about planning the installation of your DS8000 series, including equipment, site, and power requirements, can be found in the IBM System Storage DS8000 Introduction and Planning Guide (GC35-0515).
Logical configuration planning and application
Logical configuration planning is a customer responsibility. Logical configuration refers to the creation of RAID ranks, volumes, and/or LUNs, and the assignment of the configured capacity to servers.
Application of the initial logical configuration and all subsequent modifications to the logical configuration is a customer responsibility. The logical configuration can be created, applied, and modified using the DS Storage Manager, DS CLI, or DS Open API.
IBM Global Services will also apply and/or modify your logical configuration (fee-based services).
Licensed Machine Code planning and application
IBM may release changes to the DS8000 series Licensed Machine Code. IBM plans to make most DS8000 series Licensed Machine Code changes available for download by the DS8000 series system from the IBM System Storage technical support Web site. Please note that not all Licensed Machine Code changes may be available via the support Web site. If the machine does not function as warranted and your problem can be resolved through your application of downloadable Licensed Machine Code, you are responsible for downloading and installing these designated Licensed Machine Code changes as IBM specifies. IBM has responsibility for installing changes that IBM does not make available for you to download. The DS8000 series includes many enhancements to make the Licensed Machine Code change process simpler, quicker, and more automated. If you would prefer, you may request IBM to install downloadable Licensed Machine Code changes; however, you may be charged for that service.
Calculating physical and effective capacity
Refer to the IBM System Storage DS8000 Introduction and Planning Guide (GC35-0515) for capacity calculation guidelines.
You are responsible for downloading or obtaining from IBM, and installing designated Machine Code (microcode, basic input/output system code (called "BIOS"), utility programs, device drivers, and diagnostics delivered with an IBM machine) and other software updates in a timely manner from an IBM Internet Web site or from other electronic media, and following the instructions that IBM provides. You may request IBM to install Machine Code changes; however, you may be charged for that service.
Cable orders
No cables are required.
Installability
Direct customer support
Direct customer support for the DS8000 series is provided by IBM Operational Support Services - Support Line. This fee service can enhance your productivity by providing voice and electronic access into the IBM support organization. IBM Operational Support Services - Support Line will help answer questions pertaining to product and feature usage ("how to"), configuration, and product compatibility for eligible products. For a list of the products supported via Support Line, visit the following Web site
For more information on services, call 800-IBM-4YOU (426-4968).
Security, auditability, and control
This product uses the security and auditability features of the host hardware, host software, and/or application software to which it is attached.
The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.
Back to top
|
|
| IBM Electronic Services |
|
IBM has transformed its delivery of hardware and software support services to help you achieve higher system availability. Electronic Services is a Web-enabled solution that offers an exclusive, no-additional-charge enhancement to the service and support available for IBM servers. These services are designed to provide the opportunity for greater system availability with faster problem resolution and preemptive monitoring. Electronic Services comprises two separate, but complementary, elements: Electronic Services news page and Electronic Services Agent.
The Electronic Services news page is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems.
The Electronic Service Agent™ is no-additional-charge software that resides on your server. It monitors events and transmits system inventory information to IBM on a periodic, client-defined timetable. The Electronic Service Agent automatically reports hardware problems to IBM. Early knowledge about potential problems enables IBM to deliver proactive service that may result in higher system availability and performance. In addition, information collected through the Service Agent is made available to IBM service support representatives when they help answer your questions or diagnose problems. Installation and use of IBM Electronic Service Agent for problem reporting enables IBM to provide better support and service for your IBM server.
To learn how Electronic Services can work for you, visit
Back to top
|
|
| Terms and conditions |
|
MES discount applicable
No
Field-installable feature
Yes
Warranty period
Four years
Customer setup
No
Licensed Internal Code
Same license terms and conditions as designated machine.
Back to top
|
|
| Prices |
|
For current charges, contact your IBM representative.
Machine Feature
Description type Model number
System Storage DS8100 2107 921
Disk Drive Sets:
- 1 TB 7.2K SATA Drive Set 2816
Standby CoD Disk Drive Sets:
- 1 TB 7.2K SATA CoD Drive Set 2817
Machine Feature
Description type Model number
System Storage DS8300 2107 922
Disk Drive Sets:
- 1 TB 7.2K SATA Drive Set 2816
Standby CoD Disk Drive Sets:
- 1 TB 7.2K SATA CoD Drive Set 2817
Machine Feature
Description type Model number
System Storage DS8100 2107 931
Disk Drive Sets:
- 1 TB 7.2K SATA Drive Set 2816
Standby CoD Disk Drive Sets:
- 1 TB 7.2K SATA CoD Drive Set 2817
Machine Feature
Description type Model number
System Storage DS8300 2107 932
Disk Drive Sets:
- 1 TB 7.2K SATA Drive Set 2816
Standby CoD Disk Drive Sets:
- 1 TB 7.2K SATA CoD Drive Set 2817
Machine Feature
Description type Model number
System Storage DS8000 2107 92E
Expansion Unit
Disk Drive Sets:
- 1 TB 7.2K SATA Drive Set 2816
Standby CoD Disk Drive Sets:
- 1 TB 7.2K SATA CoD Drive Set 2817
Machine Feature
Description type Model number
System Storage DS8300 2107 9A2
Disk Drive Sets:
- 1 TB 7.2K SATA Drive Set A 2826
- 1 TB 7.2K SATA Drive Set B 2836
Standby CoD Disk Drive Sets:
- 1 TB 7.2K SATA CoD Drive Set A 2827
- 1 TB 7.2K SATA CoD Drive Set B 2837
Machine Feature
Description type Model number
System Storage DS8300 2107 9B2
Disk Drive Sets:
- 1 TB 7.2K SATA Drive Set A 2826
- 1 TB 7.2K SATA Drive Set B 2836
Standby CoD Disk Drive Sets:
- 1 TB 7.2K SATA CoD Drive Set A 2827
- 1 TB 7.2K SATA CoD Drive Set B 2837
Machine Feature
Description type Model number
System Storage DS8000 2107 9AE
Expansion Unit
Disk Drive Sets:
- 1 TB 7.2K SATA Drive Set A 2826
- 1 TB 7.2K SATA Drive Set B 2836
Standby CoD Disk Drive Sets:
- 1 TB 7.2K SATA CoD Drive Set A 2827
- 1 TB 7.2K SATA CoD Drive Set B 2837
| Machine Type | Model | Feature | Description | List Price |
| 2107 | 921 | 2816 | 1TB 7.2K SATA Drive Set | $95,000 |
| 2107 | 921 | 2817 | 1TB 7.2K SATA CoD Drive Set | $9,500 |
| 2107 | 922 | 2816 | 1TB 7.2K SATA Drive Set | $95,000 |
| 2107 | 922 | 2817 | 1TB 7.2K SATA CoD Drive Set | $9,500 |
| 2107 | 931 | 2816 | 1TB 7.2K SATA Drive Set | $95,000 |
| 2107 | 931 | 2817 | 1TB 7.2K SATA CoD Drive Set | $9,500 |
| 2107 | 932 | 2816 | 1TB 7.2K SATA Drive Set | $95,000 |
| 2107 | 932 | 2817 | 1TB 7.2K SATA CoD Drive Set | $9,500 |
| 2107 | 92E | 2816 | 1TB 7.2K SATA Drive Set | $95,000 |
| 2107 | 92E | 2817 | 1TB 7.2K SATA CoD Drive Set | $9,500 |
| 2107 | 9A2 | 2826 | 1TB 7.2K SATA Drive Set A | $95,000 |
| 2107 | 9A2 | 2836 | 1TB 7.2K SATA Drive Set B | $95,000 |
| 2107 | 9A2 | 2827 | 1TB 7.2K SATA CoD Drive SetA | $9,500 |
| 2107 | 9A2 | 2837 | 1TB 7.2K SATA CoD Drive SetB | $9,500 |
| 2107 | 9B2 | 2826 | 1TB 7.2K SATA Drive Set A | $95,000 |
| 2107 | 9B2 | 2836 | 1TB 7.2K SATA Drive Set B | $95,000 |
| 2107 | 9B2 | 2827 | 1TB 7.2K SATA CoD Drive SetA | $9,500 |
| 2107 | 9B2 | 2837 | 1TB 7.2K SATA CoD Drive SetB | $9,500 |
| 2107 | 9AE | 2826 | 1TB 7.2K SATA Drive Set A | $95,000 |
| 2107 | 9AE | 2836 | 1TB 7.2K SATA Drive Set B | $95,000 |
| 2107 | 9AE | 2827 | 1TB 7.2K SATA CoD Drive SetA | $9,500 |
| 2107 | 9AE | 2837 | 1TB 7.2K SATA CoD Drive SetB | $9,500 |
| Machine Type | Model | Partnumber | Description | List Price |
| 2107 | 921 | 210728162826 | Disk drive set conversion | $0 |
| 2107 | 921 | 210728162836 | Disk drive set conversion | $0 |
| 2107 | 921 | 210728172816 | CoD Disk driveset conversion | $85,500 |
| 2107 | 921 | 210728172827 | CoD Disk driveset conversion | $0 |
| 2107 | 921 | 210728172837 | CoD Disk driveset conversion | $0 |
| 2107 | 922 | 210728162826 | Disk drive set conversion | $0 |
| 2107 | 922 | 210728162836 | Disk drive set conversion | $0 |
| 2107 | 922 | 210728172816 | CoD Disk driveset conversion | $85,500 |
| 2107 | 922 | 210728172827 | CoD Disk driveset conversion | $0 |
| 2107 | 922 | 210728172837 | CoD Disk driveset conversion | $0 |
| 2107 | 931 | 210728162826 | Disk drive set conversion | $0 |
| 2107 | 931 | 210728162836 | Disk drive set conversion | $0 |
| 2107 | 931 | 210728172816 | CoD Disk driveset conversion | $85,500 |
| 2107 | 931 | 210728172827 | CoD Disk driveset conversion | $0 |
| 2107 | 931 | 210728172837 | CoD Disk driveset conversion | $0 |
| 2107 | 932 | 210728162826 | Disk drive set conversion | $0 |
| 2107 | 932 | 210728162836 | Disk drive set conversion | $0 |
| 2107 | 932 | 210728172816 | CoD Disk driveset conversion | $85,500 |
| 2107 | 932 | 210728172827 | CoD Disk driveset conversion | $0 |
| 2107 | 932 | 210728172837 | CoD Disk driveset conversion | $0 |
| 2107 | 92E | 210728162826 | Disk drive set conversion | $0 |
| 2107 | 92E | 210728162836 | Disk drive set conversion | $0 |
| 2107 | 92E | 210728172816 | CoD Disk driveset conversion | $85,500 |
| 2107 | 92E | 210728172827 | CoD Disk driveset conversion | $0 |
| 2107 | 92E | 210728172837 | CoD Disk driveset conversion | $0 |
| 2107 | 9A2 | 210728262816 | Disk drive set conversion | $0 |
| 2107 | 9A2 | 210728362816 | Disk drive set conversion | $0 |
| 2107 | 9A2 | 210728272826 | CoD Disk driveset conversion | $85,500 |
| 2107 | 9A2 | 210728272817 | CoD Disk driveset conversion | $0 |
| 2107 | 9A2 | 210728372836 | CoD Disk driveset conversion | $85,500 |
| 2107 | 9A2 | 210728372817 | CoD Disk driveset conversion | $0 |
| 2107 | 9B2 | 210728262816 | Disk drive set conversion | $0 |
| 2107 | 9B2 | 210728362816 | Disk drive set conversion | $0 |
| 2107 | 9B2 | 210728272826 | CoD Disk driveset conversion | $85,500 |
| 2107 | 9B2 | 210728272817 | CoD Disk driveset conversion | $0 |
| 2107 | 9B2 | 210728372836 | CoD Disk driveset conversion | $85,500 |
| 2107 | 9B2 | 210728372817 | CoD Disk driveset conversion | $0 |
| 2107 | 92E | 210728262816 | Disk drive set conversion | $0 |
| 2107 | 92E | 210728362816 | Disk drive set conversion | $0 |
| 2107 | 92E | 210728272826 | CoD Disk driveset conversion | $85,500 |
| 2107 | 92E | 210728272817 | CoD Disk driveset conversion | $0 |
| 2107 | 92E | 210728372836 | CoD Disk driveset conversion | $85,500 |
| 2107 | 92E | 210728372817 | CoD Disk driveset conversion | $0 |
Feature change options
Feature Install* Feature Feature Feature
Description number type conversion exchange remove
Disk Drive Sets:
- 1 TB 7.2K SATA Drive Set 2816 Both Yes No Yes
- 1 TB 7.2K SATA Drive Set A 2826 Both Yes No Yes
- 1 TB 7.2K SATA Drive Set B 2836 Both Yes No Yes
Standby CoD Disk Drive Sets:
- 1 TB 7.2K SATA CoD Drive Set 2817 Both Yes No Yes
- 1 TB 7.2K SATA CoD Drive Set A 2827 Both Yes No Yes
- 1 TB 7.2K SATA CoD Drive Set B 2837 Both Yes No Yes
* Install type of Both designates plant and field install.
Feature conversions
Machine type 2107 Disk Drive Sets: 1 TB SATA Drive Sets Feature Returned Continuous From To Description parts * maintenance 2816 2826 Disk drive set conversion No Yes 2816 2836 Disk drive set conversion No Yes 2826 2816 Disk drive set conversion No Yes 2836 2816 Disk drive set conversion No Yes
Standby CoD Disk Drive Sets:
1 TB SATA Drive Sets Feature Returned Continuous From To Description parts * maintenance 2817 2816 CoD Disk drive set conversion No Yes 2817 2827 CoD Disk drive set conversion No Yes 2817 2837 CoD Disk drive set conversion No Yes 2827 2826 CoD Disk drive set conversion No Yes 2827 2817 CoD Disk drive set conversion No Yes 2837 2836 CoD Disk drive set conversion No Yes 2837 2817 CoD Disk drive set conversion No Yes * Parts removed or replaced become the property of IBM and must be returned.
Trademarks
DS8000, System Storage and Electronic Service Agent are trademarks of IBM Corporation in the United States, other countries, or both.
FlashCopy, IBM, z/OS and TotalStorage are registered trademarks of IBM Corporation in the United States, other countries, or both.
Other company, product, and service names may be trademarks or service marks of others.
Terms of use
IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at:
For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page
Back to top
Printable version