IBM System Storage N series adds features for additional function
IBM United States Hardware Announcement 107-620October 23, 2007
Table of contents | Document options | ||||||||||||||
|
|
|
Overview |
The following features are available for various models of the IBM System Storage N series. Not all apply to all N series models. Refer to the Description section for details.
-
Hardware features
- 4-Port Cu GbE TOE NIC (feature #1009)
- 2-Port MetroCluster VI HBA (feature #1018)
- 4-Port Cu GbE NIC (feature #1023)
- Dual-port GigE Copper NIC (feature #1026)
- 2-Port MetroCluster VI HBA (feature #1032)
- 4-Port 4-Gbps FC HBA Tap/Dsk (feature #1035)
- Extended longwave SFP, 4-Gbps (feature #1050)
-
Licensed function
- SnapMirror/SnapVault Bundle
- NearStore
- MetroCluster
- MS Exchange Bundle
-
Specify features
- Uninstalled code authorization (feature #9550)
|
Key prerequisites |
The IBM System Storage N series requires FC, NFS, CIFS, or iSCSI protocol function.
Back to top
|
Planned availability dates |
- October 26, 2007: For Uninstalled code authorization (#9550)
- November 9, 2007: For MS Exchange Bundle features
- December 7, 2007
For ordering, contact:
Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at
800-IBM-CALL
(Reference: YE001).
Back to top
|
Description |
Feature descriptions
Adapters
4-Port Cu GbE TOE NIC (#1009): This four-port gigabit Ethernet network interface card provides full TCP/IP offload engine (TOE) capability and iSCSI acceleration. The TOE function includes TCP and UDP checksum offload and large send offload. The iSCSI acceleration includes header and data digest (CRC) generation and verification.
This gigabit Ethernet (1000Base-T) PCI-X TOE feature provides four RJ45 connectors. The maximum supported distance is 100 meters using Cat. 5, or better, unshielded twisted pair (UTP) four-pair media.
This feature applies to the N5200 and N5500, all models (A10, A20, G10, and G20).
2-Port MetroCluster VI HBA (#1018): This PCI-X adapter is used only in support of the MetroCluster licensed function feature and the IBM 2005 FC Switch. It provides the connection heartbeat.
Note: This feature requires Data ONTAP V7.2.3, or later.
This feature applies to the N5200 and N5500 dual-node gateways (Model G20).
4-port Cu GbE NIC (#1023): This 10/100/1000 Ethernet (10Base-t, 100Base-TX, and 1000Base-T) PCIe feature provides four RJ45 connectors. The maximum supported distance is 100 meters using Cat. 5, or better, unshielded twisted pair (UTP) four-pair media.
This feature applies to applies to all models of N7600 and N7800.
Dual-port GigE Copper NIC (#1026): This gigabit Ethernet iSCSI target PCIe adapter provides two Ethernet iSCSI ports to be configured as target connections for iSCSI hosts.
This feature applies to all models of N7600 and N7800.
2-Port MetroCluster VI HBA (#1032): This PCIe adapter is used only in support of the MetroCluster licensed function feature and the IBM 2005-16B FC Switch. It provides the connection heartbeat.
Note: This feature requires Data ONTAP V7.2.3, or later.
This feature applies to the dual-node gateways (Model G20) of N5300, N5600, N7600, and N7800.
4-Port 4-Gbps FC HBA Tap/Dsk (#1035): This feature provides one PCIe quad-port 4-Gbps HBA for attaching tape and disk expansion units (EXN1000, EXN2000, and EXN4000) to N series storage controller. This adapter auto-negotiates connections of 1-Gbps, 2-Gbps, or 4-Gbps. Two small form factor (SFF) multimode optical ports with LC connectors support the following cable lengths:
Link 50 micron 62.5 micron operating multimode multimode speed fiber fiber 1 Gbps 500 m 300 m 2 Gbps 300 m 150 m 4 Gpbs 150 m 70 m
The ports of this adapter may not be used as FCP target ports.
This feature applies to the N5300, N5600, N7600, and N7800 storage controllers (Model A10 and Model A20).
Extended longwave SFP, 4-Gbps (#1050): This feature provides 4 Gbps Extended Long-wave SFP to support MetroCluster configurations. This SFP is used only to connect two IBM 2005 switches used for configuring Fabric MetroCluster for distances up to 30 km. One SFP is required for each switch in the MetroCluster configuration.
This feature applies to the N5200, N5300, N5500, N5600, N7600, and N7800, dual-node gateways (Model G20).
Licensed function indicators
SnapMirror/SnapVault Bundle: This feature is a bundle of the SnapMirror and SnapVault Secondary features, designed to provide improved value for the combination. It is typically used by customers wanting to provide a mirrored, remote site for their data backup. This feature is designed to accomplish that by having the SnapVault function create an initial, local backup copy of the data, and then having the SnapMirror function copy the data to a remote site. SnapVault Primary and SnapManager are not included in this bundle.
NearStore: This feature is designed to help optimize an N series system for data protection and retention applications. It enables additional concurrent streams and SnapVault for NetBackup.
Previously available for only N series storage controllers, the NearStore feature is added for all N series gateway models.
MetroCluster: This feature is an integrated, high-availability, and business-continuance solution designed to leverage proven technologies from IBM. It expands the capabilities of the IBM N series portfolio of high-availability and disaster recovery solutions a portfolio that includes failover, data replication, and backup solutions. MetroCluster is designed to be a simple-to-administer solution that extends failover capability from within a data center to a remote site. It is also designed to provide replication of data from the primary site to a remote site, helping keep data at the remote site current. The combination of failover and data replication aids in the recovery from disaster helping prevent loss of data in less time than otherwise possible.
Previously available for only N series storage controllers, the MetroCluster feature is added for all N series G20 (dual node) gateway models.
MS Exchange Bundles
These features are bundles including SnapManager for Exchange, SnapRestore, SnapDrive for Windows®, and Single Mailbox Backup/Recovery for use in MS Exchange installations. They are intended as a set of features designed to be used by MS Exchange administrators using iSCSI implementations, but can also be used with FCP provided the FCP protocol and media kit are also installed.
MS Exchange Bundle, 2.5K usr (#7178): This MS Exchange Bundle feature is designed to provide support for 2,500 Single Mailbox Recovery users. Incorporated in the bundle is feature #8153. This feature is available only for the N series N3600 (2862) Model A20.
MS Exchange Bundle, 5K usrs (#6078): This MS Exchange Bundle feature is designed to provide support for 5,000 Single Mailbox Recovery users. Incorporated in the bundle is feature #8154. This feature is available only for the N series N5600 (2868) Model A20.
MS Exchange Bundle, 10K usrs (#7678): This MS Exchange Bundle feature is designed to provide support for 10,000 Single Mailbox Recovery users. Incorporated in the bundle is feature #8155. This feature is available only for the N series N7600 (2866) Model A20.
Specify feature
Uninstalled code authorization (#9550):
This feature authorizes IBM to ship the N series machine without the software having been
preloaded. When this feature is specified, the license function activation codes will be shipped
separately. Installation of the activation codes is a customer responsibility.
Back to top
|
Reference information |
Refer to 107-619 , dated October 23, 2007, IBM System Storage N series function authorizations for IBM System Storage N series hardware.
Business Partner information
If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID).
BP Attachment for Announcement Letter 107-620
Trademarks
Back to top
|
Publications |
For detailed lists of publications for N series systems, refer to Hardware Announcements:
- 107-494 , dated August 28, 2007, IBM System Storage N3300 Model A10 and Model A20 offer Fibre Channel, iSCSI, and NAS storage
- 107-495 , dated August 28, 2007, IBM System Storage N3600 Model A10 and Model A20 offer Fibre Channel, iSCSI, and NAS storage
- 105-265 , dated July 28, 2005, IBM TotalStorage® N3700 offers entry-level Network Attached Storage
- 106-205 , dated February 28, 2006, IBM System Storage N5200 adds new software features
- 106-201 , dated February 28, 2006, IBM System Storage N5500 adds new software features
- 106-633 , dated August 22, 2006, IBM System Storage N7600 Model A10 and A20 offer enterprise-class Fibre Channel, iSCSI, and NAS storage
- 106-641 , dated August 22, 2006, IBM System Storage N7600 Model G10 and G20 offer enterprise-class Network Attached Storage gateways
- 106-644 , dated August 22, 2006, IBM System Storage N7800 Model A10 and A20 offer enterprise-class Fibre Channel, iSCSI, and NAS storage.
- 106-635 , dated August 22, 2006, IBM System Storage N7800 Model G10 and G20 offer enterprise-class Network Attached Storage gateways
All of the above publications are available on the N series support Web site
Publications are only available for download for existing IBM N series customers who have registered their N series products on the N series support site.
All N series publications are available on the N series support Web site
Publications are only available for download for existing IBM N series
customers who have registered their N series products on the N series
support site.
Back to top
|
Services |
Global Technology Services
IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.
These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.
For details on available services, contact your IBM representative or visit
For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit
For details on education offerings related to specific products, visit
Select your country, and then select the product as the category.
Back to top
|
Technical information |
Hardware requirements
Licensed machine code (LMC): The N series requires LMC level 7.1.0, or later. Some N series features and functions may not be available or supported in all environments. Current information on supported environments, prerequisites, and minimum operating systems levels is available at
Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance.
Licensed functions
The following licensed functions are required on N series systems:
- Data ONTAP
- CFO or SAN Bundle (A20 and G20 models only)
Licensed functions require the selection of N series licensed function features and the acquisition of the corresponding IBM 2870 function authorization features.
Planning information
You are responsible for downloading or obtaining from IBM, and installing designated Machine Code (microcode, basic input/output system code (called "BIOS"), utility programs, device drivers, and diagnostics delivered with an IBM machine) and other software updates in a timely manner from an IBM Internet Web site or from other electronic media, and following the instructions that IBM provides. You may request IBM to install Machine Code changes; however, you may be charged for that service.
Cable orders: No cables required.
Security, auditability, and control
These features use the security and auditability features of host hardware, host software, and/or application software to which it is attached.
The customer is responsible for evaluation, selection, and implementation of security features,
administrative procedures, and appropriate controls in application systems and communications
facilities.
Back to top
|
Terms and conditions |
MES discount applicable: Equal to the volume commitment discount
Field installable feature: Yes
Warranty period: Three years These features assume the same warranty or maintenance terms as the machine in which it is installed for the full warranty or maintenance period announced for such machine.
Customer set-up: Yes
Machine Code:
Same license terms and conditions as base machine
Back to top
|
Prices |
The prices provided in this announcement are suggested retail prices for the U.S. only and are provided for your information only. Dealer prices may vary, and prices may also vary by country. Prices are subject to change without notice. For additional information and current prices, contact your local IBM representative.
Machine Feature Purchase Description type Model number price 4-Port Cu GbE TOE NIC 2864 A10, A20 1009 $4,000 G10, G20 2865 A10, A20 G10, G20 2-Port MetroCluster VI HBA 2864 G20 1018 3,250 2865 G20 4-port Cu GbE NIC 2866 A10, A20 1023 1,500 G10, G20 2867 A10, A20 G10, G20 Dual-port GigE Copper NIC 2866 A10, A20 1026 2,400 G10, G20 2867 A10, A20 G10, G20 2-Port MetroCluster VI HBA 2866 G20 1032 3,250 2867 G20 2868 G20 2869 G20 4-Port 4-Gbps FC HBA Tap/Dsk 2866 A10, A20 1035 4,000 2867 A10, A20 2868 A10, A20 2869 A10, A20 Ext. longwave SFP, 4-Gbps 2864 G20 1050 1,350 2865 G20 2866 G20 2867 G20 2868 G20 2869 G20 SnapMirror/SnapVault Bundle 2859 A10 6329 0 A20 6379 0 2862 A10 7029 0 A20 7129 0 2863 A10 7029 0 A20 7129 0 2864 A10 7229 0 A20 7279 0 G10 7329 0 G20 7379 0 2865 A10 7429 0 A20 7479 0 G10 7529 0 G20 7579 0 2866 A10 7629 0 A20 7679 0 G10 7729 0 G20 7779 0 2867 A10 7829 0 A20 7879 0 G10 7929 0 G20 7979 0 2868 A10 7629 0 A20 6079 0 G10 7729 0 G20 6179 0 2869 A10 7429 0 A20 7479 0 G10 7529 0 G20 7579 0 NearStore 2864 G10 7322 0 G20 7372 0 2865 G10 7522 0 G20 7572 0 2866 G10 7722 0 G20 7772 0 2867 G10 7922 0 G20 7972 0 2868 G10 7722 0 G20 6172 0 2869 G10 7522 0 G20 7572 0 MetroCluster 2864 G20 7373 0 2865 G20 7573 0 2866 G20 7773 0 2867 G20 7973 0 2868 G20 6173 0 2869 G20 7573 0 MS Exchange Bundle, 2.5K usr 2862 A20 7178 0 MS Exchange Bundle, 5K usrs 2868 A20 6078 0 MS Exchange Bundle, 10K usrs 2866 A20 7678 0 Specify feature Uninstalled code authoriztn 2859 A10, A20 9550 N/C 2862 A10, A20 2863 A10, A20 2864 A10, A20 G10, G20 2865 A10, A20 G10, G20 2866 A10, A20 G10, G20 2867 A10, A20 G10, G20 2868 A10, A20 G10, G20 2869 A10, A20 G10, G20 Plant/ Field MES Cabl CSU Mach/Mod/Feat install removal req. (1) SnapMirror/SnapVault Bundle 2859/A10/6329 Both N N Y Uninstalled code authoriztn 2859/A10/9550 Plant N N Y SnapMirror/SnapVault Bundle 2859/A20/6379 Both N N Y Uninstalled code authoriztn 2859/A20/9550 Plant N N Y SnapMirror/SnapVault Bundle 2862/A10/7029 Both N N Y Uninstalled code authoriztn 2862/A10/9550 Plant N N Y SnapMirror/SnapVault Bundle 2862/A20/7129 Both N N Y MS Exchange Bundle, 2.5K usr 2862/A20/7178 Both N N Y Uninstalled code authoriztn 2862/A20/9550 Plant N N Y SnapMirror/SnapVault Bundle 2863/A10/7029 Both N N Y Uninstalled code authoriztn 2863/A10/9550 Plant N N Y SnapMirror/SnapVault Bundle 2863/A20/7129 Both N N Y Uninstalled code authoriztn 2863/A20/9550 Plant N N Y 4-Port Cu GbE TOE NIC 2864/A10/1009 Both N N Y SnapMirror/SnapVault Bundle 2864/A10/7229 Both N N Y Uninstalled code authoriztn 2864/A10/9550 Plant N N Y 4-Port Cu GbE TOE NIC 2864/A20/1009 Both N N Y SnapMirror/SnapVault Bundle 2864/A20/7279 Both N N Y Uninstalled code authoriztn 2864/A20/9550 Plant N N Y 4-Port Cu GbE TOE NIC 2864/G10/1009 Both N N Y NearStore 2864/G10/7322 Both N N Y SnapMirror/SnapVault Bundle 2864/G10/7329 Both N N Y Uninstalled code authoriztn 2864/G10/9550 Plant N N Y 4-Port Cu GbE TOE NIC 2864/G20/1009 Both N N Y 2-Port MetroCluster VI HBA 2864/G20/1018 Both N N Y Ext. longwave SFP, 4-Gbps 2864/G20/1050 Both N N Y NearStore 2864/G20/7372 Both N N Y MetroCluster 2864/G20/7373 Both N N Y SnapMirror/SnapVault Bundle 2864/G20/7379 Both N N Y Uninstalled code authoriztn 2864/G20/9550 Plant N N Y 4-Port Cu GbE TOE NIC 2865/A10/1009 Both N N Y SnapMirror/SnapVault Bundle 2865/A10/7429 Both N N Y Uninstalled code authoriztn 2865/A10/9550 Plant N N Y 4-Port Cu GbE TOE NIC 2865/A20/1009 Both N N Y SnapMirror/SnapVault Bundle 2865/A20/7479 Both N N Y Uninstalled code authoriztn 2865/A20/9550 Plant N N Y 4-Port Cu GbE TOE NIC 2865/G10/1009 Both N N Y NearStore 2865/G10/7522 Both N N Y SnapMirror/SnapVault Bundle 2865/G10/7529 Both N N Y Uninstalled code authoriztn 2865/G10/9550 Plant N N Y 4-Port Cu GbE TOE NIC 2865/G20/1009 Both N N Y 2-Port MetroCluster VI HBA 2865/G20/1018 Both N N Y Ext. longwave SFP, 4-Gbps 2865/G20/1050 Both N N Y NearStore 2865/G20/7572 Both N N Y MetroCluster 2865/G20/7573 Both N N Y SnapMirror/SnapVault Bundle 2865/G20/7579 Both N N Y Uninstalled code authoriztn 2865/G20/9550 Plant N N Y 4-Port Cu GbE NIC 2866/A10/1023 Both N N Y Dual-port GigE Copper NIC 2866/A10/1026 Both N N Y 4-Port 4-Gbps FC HBA Tap/Dsk 2866/A10/1035 Both N N Y SnapMirror/SnapVault Bundle 2866/A10/7629 Both N N Y Uninstalled code authoriztn 2866/A10/9550 Plant N N Y 4-Port Cu GbE NIC 2866/A20/1023 Both N N Y Dual-port GigE Copper NIC 2866/A20/1026 Both N N Y 4-Port 4-Gbps FC HBA Tap/Dsk 2866/A20/1035 Both N N Y MS Exchange Bundle, 10K usrs 2866/A20/7678 Both N N Y SnapMirror/SnapVault Bundle 2866/A20/7679 Both N N Y Uninstalled code authoriztn 2866/A20/9550 Plant N N Y 4-Port Cu GbE NIC 2866/G10/1023 Both N N Y Dual-port GigE Copper NIC 2866/G10/1026 Both N N Y NearStore 2866/G10/7722 Both N N Y SnapMirror/SnapVault Bundle 2866/G10/7729 Both N N Y Uninstalled code authoriztn 2866/G10/9550 Plant N N Y 4-Port Cu GbE NIC 2866/G20/1023 Both N N Y Dual-port GigE Copper NIC 2866/G20/1026 Both N N Y 2-Port MetroCluster VI HBA 2866/G20/1032 Both N N Y Ext. longwave SFP, 4-Gbps 2866/G20/1050 Both N N Y NearStore 2866/G20/7772 Both N N Y MetroCluster 2866/G20/7773 Both N N Y SnapMirror/SnapVault Bundle 2866/G20/7779 Both N N Y Uninstalled code authoriztn 2866/G20/9550 Plant N N Y 4-Port Cu GbE NIC 2867/A10/1023 Both N N Y Dual-port GigE Copper NIC 2867/A10/1026 Both N N Y 4-Port 4-Gbps FC HBA Tap/Dsk 2867/A10/1035 Both N N Y SnapMirror/SnapVault Bundle 2867/A10/7829 Both N N Y Uninstalled code authoriztn 2867/A10/9550 Plant N N Y 4-Port Cu GbE NIC 2867/A20/1023 Both N N Y Dual-port GigE Copper NIC 2867/A20/1026 Both N N Y 4-Port 4-Gbps FC HBA Tap/Dsk 2867/A20/1035 Both N N Y SnapMirror/SnapVault Bundle 2867/A20/7879 Both N N Y Uninstalled code authoriztn 2867/A20/9550 Plant N N Y 4-Port Cu GbE NIC 2867/G10/1023 Both N N Y Dual-port GigE Copper NIC 2867/G10/1026 Both N N Y NearStore 2867/G10/7922 Both N N Y SnapMirror/SnapVault Bundle 2867/G10/7929 Both N N Y Uninstalled code authoriztn 2867/G10/9550 Plant N N Y 4-Port Cu GbE NIC 2867/G20/1023 Both N N Y Dual-port GigE Copper NIC 2867/G20/1026 Both N N Y 2-Port MetroCluster VI HBA 2867/G20/1032 Both N N Y Ext. longwave SFP, 4-Gbps 2867/G20/1050 Both N N Y NearStore 2867/G20/7972 Both N N Y MetroCluster 2867/G20/7973 Both N N Y SnapMirror/SnapVault Bundle 2867/G20/7979 Both N N Y Uninstalled code authoriztn 2867/G20/9550 Plant N N Y 4-Port 4-Gbps FC HBA Tap/Dsk 2868/A10/1035 Both N N Y SnapMirror/SnapVault Bundle 2868/A10/7629 Both N N Y Uninstalled code authoriztn 2868/A10/9550 Plant N N Y 4-Port 4-Gbps FC HBA Tap/Dsk 2868/A20/1035 Both N N Y MS Exchange Bundle, 5K usrs 2868/A20/6078 Both N N Y SnapMirror/SnapVault Bundle 2868/A20/6079 Both N N Y Uninstalled code authoriztn 2868/A20/9550 Plant N N Y NearStore 2868/G10/7722 Both N N Y SnapMirror/SnapVault Bundle 2868/G10/7729 Both N N Y Uninstalled code authoriztn 2868/G10/9550 Plant N N Y 2-Port MetroCluster VI HBA 2868/G20/1032 Both N N Y Ext. longwave SFP, 4-Gbps 2868/G20/1050 Both N N Y NearStore 2868/G20/6172 Both N N Y MetroCluster 2868/G20/6173 Both N N Y SnapMirror/SnapVault Bundle 2868/G20/6179 Both N N Y Uninstalled code authoriztn 2868/G20/9550 Plant N N Y 4-Port 4-Gbps FC HBA Tap/Dsk 2869/A10/1035 Both N N Y SnapMirror/SnapVault Bundle 2869/A10/7429 Both N N Y Uninstalled code authoriztn 2869/A10/9550 Plant N N Y 4-Port 4-Gbps FC HBA Tap/Dsk 2869/A20/1035 Both N N Y SnapMirror/SnapVault Bundle 2869/A20/7479 Both N N Y Uninstalled code authoriztn 2869/A20/9550 Plant N N Y NearStore 2869/G10/7522 Both N N Y SnapMirror/SnapVault Bundle 2869/G10/7529 Both N N Y Uninstalled code authoriztn 2869/G10/9550 Plant N N Y 2-Port MetroCluster VI HBA 2869/G20/1032 Both N N Y Ext. longwave SFP, 4-Gbps 2869/G20/1050 Both N N Y NearStore 2869/G20/7572 Both N N Y MetroCluster 2869/G20/7573 Both N N Y SnapMirror/SnapVault Bundle 2869/G20/7579 Both N N Y Uninstalled code authoriztn 2869/G20/9550 Plant N N Y (1) Customer setup
ICA Maintenance
Machine Feature IOR IOR type/model number 24 x 7 9 x 5 2859-A10 6329 $ 63 $ 45 2859-A20 6379 95 68 2862-A10 7029 203 145 2862-A20 7129 304 217 2862-A20 7178 251 179 2863-A10 7029 203 145 2863-A20 7129 304 217 2864-A10 7229 361 258 2864-A20 7279 649 464 2864-G10 7329 361 258 2864-G20 7379 649 464 2864-G10 7322 22 15 2864-G20 7372 29 21 2864-G20 7373 115 82 2865-A10 7429 721 515 2865-A20 7479 974 696 2865-G10 7529 721 515 2865-G20 7579 974 696 2865-G20 7572 43 31 2865-G20 7573 115 82 2865-G10 7522 36 26 2866-A10 7629 902 644 2866-A20 7679 1,623 1,159 2866-G10 7729 902 644 2866-G20 7779 1,623 1,159 2866-G10 7722 0 0 2866-G20 7772 0 0 2866-G20 7773 289 206 2866-A20 7678 586 418 2867-A10 7829 902 644 2867-A20 7879 1,623 1,159 2867-G10 7929 902 644 2867-G20 7979 1,623 1,159 2867-G10 7922 0 0 2867-G20 7972 0 0 2867-G20 7973 289 206 2868-A10 7629 902 644 2868-A20 6079 1,298 928 2868-G10 7729 902 644 2868-G20 6179 1,298 928 2868-G10 7722 72 52 2868-G20 6172 58 41 2868-G20 6173 231 165 2868-A20 6078 465 332 2869-A10 7429 721 515 2869-A20 7479 974 696 2869-G10 7529 721 515 2869-G20 7579 974 696 2869-G10 7522 0 0 2869-G20 7572 43 31 2869-G20 7573 173 124
Feature conversion purchase price
Machine Feature Returned Continuous Feature conversion type from to parts maintenance purchase price 2864 7322 7372 N Y $0 2865 7522 7572 N Y 0 2866 7722 7772 N Y 0 2867 7922 7972 N Y 0 2868 7722 6172 N Y 0 2869 7522 7572 N Y 0 2859 6329 6379 N Y 0 2862 7029 7129 N Y 0 2863 7029 7129 N Y 0 2864 7229 7279 N Y 0 2864 7329 7379 N Y 0 2865 7429 7479 N Y 0 2865 7529 7579 N Y 0 2866 7629 7679 N Y 0 2866 7729 7779 N Y 0 2867 7829 7879 N Y 0 2867 7929 7979 N Y 0 2868 7629 6079 N Y 0 2868 7729 6179 N Y 0 2869 7429 7479 N Y 0 2869 7529 7579 N Y 0
|
Order now |
To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner.
To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).
Phone: 800-IBM-CALL (426-2255) Fax: 800-2IBM-FAX (242-6329) Internet: callserv@ca.ibm.com Mail: IBM Teleweb Customer Support ibm.com Sales Execution Center, Americas North 3500 Steeles Ave. East, Tower 3/4 Markham, Ontario Canada L3R 2Z1 Reference: YE001
The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.
Note: Shipments will begin after the planned availability date.
Trademarks
