IBM BladeCenter JS21 with BladeCenter H Chassis now available through AAS ordering system

IBM United States Hardware Announcement 107-331
June 5, 2007

 

 ENUS107331.PDF (43KB)

Table of contents   Document options  
TOC link At a glance TOC link Services
TOC link Overview TOC link Technical information
TOC link Key prerequisites TOC link IBM Electronic Services
TOC link Planned availability date TOC link Terms and conditions
TOC link Description TOC link Prices
TOC link Publications TOC link Order now
 
Printable version Printable version

 
At a glance

The BladeCenter H Chassis with BladeCenter JS21 solution is now available through the AAS order entry system to enable:

  • JS21, chassis, and rack integration by either IBM manufacturing or IBM Business Partner
  • Optional preinstall for the JS21 blade of the AIX® 5L operating system or Virtual I/O Server (VIOS) and associated licensed program products
  • IBM System p Business Partner sales and support

The BladeCenter H Chassis delivers high performance, extreme reliability, and ultimate flexibility to even the most demanding IT environments.

Features include:

  • One pair of 2,900-watt power modules. A second pair is available.
  • Two hot-swap blowers standard.
  • One Advanced Management Module. A second module is available.
  • Ability to integrate storage and Ethernet networking into chassis.
  • Support for all current IBM blade servers.
  • Serial port breakout connector to give direct serial connection to installed blades.
  • IBM DVD, two USB inputs, and light path diagnostic panel.

For ordering, contact:

Your IBM representative or IBM Americas Call Centers at 800-IBM-CALL (Reference: YE001).
 
Back topBack to top
 

Overview

To improve consistency with other System p™ offerings, the BladeCenter® JS21 with the BladeCenter H Chassis is now available through the AAS order entry system. When the customer solution requires the BladeCenter (8677), BladeCenter T (8720/8730), or a BladeCenter HT (8740/8750) chassis, the current geography ordering system should be used.

The BladeCenter H Chassis must be ordered with at least one JS21, 7988-J21 server.

  • The rack-optimized, 9U modular design enclosure holds up to 14 blade servers.
  • A high-availability, redundant midplane supports all current IBM blades.
  • The chassis includes:
    • Two 2,900-watt, hot-swap, redundant power modules and support for two additional (optional) 2,900-watt, hot-swap, redundant power modules
    • Two hot-swap, redundant blowers and 6 or 12 supplemental fans
  • The Advanced Management Module gives you control over the solutions at the chassis level, simplifying installation and management of your installation.
  • The chassis supports up to four traditional fabrics using networking switches, storage switches, or pass-through devices. The chassis also supports up to four high-speed fabrics for support of protocols like 4X Infiniband or 10 GB Ethernet. The built-in media tray is customer-serviceable and includes light path diagnostics, front USB inputs, and a DVD drive.
  • IBM Director and Remote Deployment Manager™ make it easy to install and manage.

For function and features of the BladeCenter JS21, refer to 107-330 , dated June 5, 2007.

BladeCenter Advanced Management Module

The Advanced Management Module increases the functionality and performance seen when remotely accessing the solution:

  • Better video performance and faster refreshes
  • More complete LDAP integration
  • Much better granularity of access and permissioning
  • Faster USB response via USB 2.0 protocol for blade servers that have the functionality
  • Concurrent media access (local and remote) for blade servers that have the functionality
  • Shared management resources in the chassis
  • Multiple remote KVM sessions for blade servers that have the functionality
  • Improved serviceability
  • Backward compatibility with existing switch modules and blade servers

 
Back topBack to top
 
Key prerequisites
  • One BladeCenter JS21 (7988-J21) installed
  • Ethernet Switch Module required when used with Serial over LAN (SOL) for JS21
  • 200 to 240 V ac power source and appropriate power cord

 
Back topBack to top
 
Planned availability date

July 13, 2007
 
Back topBack to top
 

Description

BladeCenter features

BladeCenter based features include:

  • Redundant (n+n) power supplies
  • Power supply error detection
  • Remote power control
  • System event logs (Management Module)
  • Redundant blowers, switches, and management modules
  • Hot-plug of all BladeCenter field replaceable units (FRUs) (blowers, switches, and power supplies)

The BladeCenter H Chassis provides common sourcing for blade servers, cabling, cabling connections, I/O options, power modules, system management requirements, external Fibre Channel storage switching and connectivity, and network management and expansion.

Standard components include a DVD-ROM, redundant 2900 watt power supply module with fan packs, and two blowers. If more than seven blades are installed, the second redundant power supply module (2 x #3200) is required.

The 9U enclosure supports up to 14 blade servers; one JS21 blade must be ordered with the BCH. Optional installation of the JS21 blades in the BCH is available and optionally, the BladeCenter H Chassis may be integrated in the 7014-B42 rack. The sales configurator will limit the total number of JS21s (7988-J21), BladeCenter Hs (7989-BCH), and 7042-B42 racks in a configuration in any combination to 30.

A maximum of four BladeCenters can be installed in a 7014 B42 rack: The bottom two BladeCenters can be factory-installed and fully populated.

An optional USB-attached external diskette can be attached to one of two front USB ports.

Two management module bays are available. The Advanced Management Module is standard; optionally, a redundant Advanced Management Module (#3201) may be installed in Management Module Bay 2.

Four Switch Modules or Bridge Bays may be populated as follows:

Bays 1, 2, 3, or 4:

  • Nortel 10 GB Uplink Ethernet Switch Module (#3210)
  • Nortel Networks Layer 2-7 Gigabit Ethernet Switch Module (#3211)
  • Nortel Networks L2/L3 Copper Gigabit Ethernet Switch Module (#3212)
  • Nortel Networks L2/L3 Fiber Gigabit Ethernet Switch Module (#3213)
  • Cisco Systems Fiber Intelligent Gigabit Ethernet Switch Module (#3214)
  • Cisco Systems Intelligent Gigabit Ethernet Switch Module (#3215)
  • Optical Pass-thru Module (#3218)
  • Copper Pass-thru Module (#3219)
  • Server Connectivity Module (#3220)

Bays 3 or 4:

  • QLogic 4 Gb 20-port Fibre Channel Switch Module (#3202)
  • QLogic 4 Gb 10-port Fibre Channel Switch Module (#3203)
  • Brocade 4 Gb 20-port SAN Switch Module (#3206)
  • Brocade 4 Gb 10-port SAN Switch Module (#3207)
  • McDATA 4 Gb 20-port Fibre Channel Switch Module (#3208)
  • McDATA 4 Gb 10-port Fibre Channel Switch Module (#3209)
  • Cisco Systems 4 Gb 20-port Fibre Channel Switch Module (#3242)
  • Cisco Systems 4 Gb 10-port Fibre Channel Switch Module (#3241)
  • QLogic 10-port 4 Gb SAN Switch Module for IBM BladeCenter (#3243)
  • QLogic 20-port 4 Gb SAN Switch Module for IBM BladeCenter (#3244)
  • QLogic 4 Gb Intelligent Pass-thru Module for IBM BladeCenter (#3245)
  • Optical Pass-thru Module (#3218)
  • Copper Pass-thru Module (#3219)

Note: When feature 3202, 3203, 3206, 3207, 3208, or 3209 is installed in bay 3, port 1 is enabled on blade-installed Fibre Channel expansion adapters. When installed in bay 4, port 2 is enabled on blade-installed Fibre Channel expansion adapters.

Feature 3210, 3211, 3212, 3213, 3214, 3215, 3219, or 3220 enables integrated Ethernet controller 1 when installed in bay 1. When installed in bay 2, integrated Ethernet controller 2 is enabled on all blade servers. Installation in bay 3 or 4 requires an Ethernet expansion adapter to be installed in blade servers.

Feature 3218 must be installed in bay 4 when Myrinet cluster expansion adapters are installed in blade servers. Either feature 3221 or 3222 must be installed in each OPM to enable connectivity to network or SAN.

Mixing Ethernet, including Copper Pass-thru Module, and Fibre/SAN switches in bays 3 and 4 is not supported. Mixing the Optical Pass-thru modules and Ethernet or Fibre/SAN switches in bays 3 and 4 is supported.

Each Fibre Channel port connection requires Short- or Long-wave SFP modules.

  • High-Speed Switch Slots 1 or 3, Switch Bay 7 or 9: Cisco Systems 4X InfiniBand Switch (#3217)

Note: When installed in Switch Bay 7, port 1 is enabled on Cisco 4X InfiniBand HCA adapters in blade servers. Port 2 is enabled when the switch is installed in Switch Bay 9.

  • High-Speed Switch Module Slots 1 and 2 or 3 and 4: Switch Bays 7 and 8, or 9 and 10: Multi-Switch Interconnect Module (#3239)

The Multi-Switch Interconnect Module, a double-high mechanical enclosure that accommodates two standard I/O modules, requires two high-speed module bays.

Supported switches include:

  • QLogic 4 Gb Fibre Channel Switch Modules
  • McDATA 4 Gb Fibre Channel Switch Modules
  • Brocade 4 Gb SAN Fibre Channel Switch Modules
  • Nortel Copper/Fiber Ethernet Switch Modules
  • Cisco Copper/Fiber Ethernet Switch Modules
  • IBM BladeCenter Copper Pass-thru Module
  • IBM BladeCenter Optical Pass-thru Module

The aMM provides KVM support for blades; JS21 supports keyboard and video. The Serial Port Breakout Cable (#3235) will support direct attachment of up to 14 keyboards and video monitors for each blade server in the BladeCenter H Chassis.

Firmware downloads for the aMM are available from

Choose: BladeCenter

Product Family: BladeCenter H

Minimum configurations

The minimum BladeCenter H configuration requires a power source and two line cords. At least one BladeCenter JS21 (7988-J21) must be installed.

Business Partner information

If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID).

BP Attachment for Announcement Letter 107-331

Trademarks

 
System p and Remote Deployment Manager are trademarks of International Business Machines Corporation in the United States or other countries or both.
 
BladeCenter, AIX, eServer, and Wave are registered trademarks of International Business Machines Corporation in the United States or other countries or both.
 
Other company, product, and service names may be trademarks or service marks of others.

 
Back topBack to top
 
Publications

No publications are shipped with the announced product.
 
Back topBack to top
 

Services

Global Technology Services

IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.

These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.

For details on available services, contact your IBM representative or visit

For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit

For details on education offerings related to specific products, visit

Select your country, and then select the product as the category.
 
Back topBack to top
 

Technical information

Specified operating environment

Physical specifications

BladeCenter® H Chassis

                               7989-BCH
 
Blade server bays (type)       High-availability midplane
Blades server standard         0
Blades server maximum          14
PCI slots                      0
I/O module bays                10
Management modules             2
Standard                       1
Additional                     1
DVD-ROM (USB)                  1
USB port -- Front              2
Diskette drive                 0
Power supply modules           2900 W
Number standard                2 with fan packs
Maximum                        4 with fan packs
Hot-swap                       Yes
Redundant power                Standard
Auto restart                   Yes
Cooling                        2 blowers
Redundant                      Yes
Hot-swap                       Yes

Electrical — BladeCenter H Chassis

  • 200-208 (nominal) V ac; 50 Hz or 60 Hz; 40 A
  • 220-240 (nominal) V ac; 50 Hz or 60Hz; 37 A
  • Input kilovolt-amperes (kVA) (approximately):
    • Minimum configuration: 0.5 kVA
    • Maximum configuration: 8.0 kVA
  • Btu Output:
    • Minimum configuration: 1705 Btu/hr (500 VA)
    • Maximum configuration: 27280 Btu/hr (8000 VA)
    • Acoustical: declared sound power level: 7.5 bels

Standards: This system supports or complies with the following standards:

  • Hardware-enabled to meet the International Organization for Standardization (ISO) 9241, Part 3

Equipment approvals and safety

  • FCC — Verified to comply with Part 15 of the FCC Rules, Class A
  • Canada ICES-003, issue 4, Class A
  • UL/IEC 60950-1(11)
  • CAN C22.2 No. 60950-1-03
  • NOM-019(11)

Note: These servers are certified by the respective UL and NOM agencies.

Operating environment

  • Temperature:
    • 10° to 35°C (50° to 95°F) at 0 to 914 m (0 to 3,000 ft)
    • 10° to 32°C (50° to 90°F) at 914 to 2,133 m (3,000 to 7,000 ft)
  • Relative humidity: 8% to 80%
  • Maximum altitude: 2,133 m (7,000 ft)

Planning information

Cable orders: No cables required.

Security, auditability, and control

Security and auditability features include:

  • A power-on password function provides control of who has access to the data and server setup program on the server.
  • A selectable boot sequence can be used to prevent unauthorized installation of software or removal of data from the diskette drive.

Limitations: The BladeCenter H Chassis has no security-intrusion detection; therefore, it should be installed in a rack environment that provides security through lockable doors or other security measures. It is a customer's responsibility to ensure that the chassis is secure.

The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.
 
Back topBack to top
 

IBM Electronic Services

IBM has transformed its delivery of hardware and software support services to help you achieve higher system availability. Electronic Services is a Web-enabled solution that offers an exclusive, no-additional-charge enhancement to the service and support available for IBM servers. These services are designed to provide greater system availability with faster problem resolution and preemptive monitoring. Electronic Services comprises two separate, but complementary, elements: Electronic Services news page and Electronic Services Agent.

The Electronic Services news page is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems.

The Electronic Service Agent™ is no-additional-charge software that resides on your server. It monitors events and transmits system inventory information to IBM on a periodic, client-defined timetable. The Electronic Service Agent automatically reports hardware problems to IBM. Early knowledge about potential problems enables IBM to deliver proactive service that may result in higher system availability and performance. In addition, information collected through the Service Agent is made available to IBM service support representatives when they help answer your questions or diagnose problems.

To learn how Electronic Services can work for you, visit


 
Back topBack to top
 
Terms and conditions

Volume orders: Contact your IBM representative.

IBM Global Financing: Yes

Warranty period: Three years

Warranty service

Types of service:

  • Customer Replaceable Unit (CRU) Service
  • Onsite Service

Warranty service: You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered CRUs will be provided as part of the machine's standard warranty service.

Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all world-wide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information. This product is covered by the following types of service.

CRU service: IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU.

Tier 1 CRU: Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation.

Tier 2 CRU: You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge.

Based upon availability, CRUs will be shipped for next-business-day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, return instructions and a container are shipped with the replacement CRU and you may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement.

The following parts have been designated as Tier 1 CRU parts:

  • Labels
  • Bezels and covers
  • External cables
  • Rack kit
  • CD-DVD Combo
  • Management module
  • Blower
  • Fan pack
  • Power supply
  • Line cord
  • Cable, serial port breakout
  • I/O Switches
  • Media tray (w/o CD/DVD)
  • Fillers

On-site service: IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose.

  • 9 hours per day, Monday through Friday, excluding holidays, next-business-day (NBD) response

Calls must be received by 5:00 p.m. local time in order to qualify for NBD service.

Non-IBM parts support

Warranty service: IBM is now shipping machines with selected non-IBM parts that contain an IBM FRU part number label. These parts are to be serviced during the IBM machine warranty period. IBM is covering the service on these selected non-IBM parts as an accommodation to their customers, and normal warranty service procedures for the IBM machine apply.

International Warranty Service: International Warranty Service (IWS) is available in selected countries or regions.

The warranty service type, for example, on-site repair (IOR) and customer replaceable unit, and service level, 9 x 5 NBD and 24 x 7, provided in the servicing country may be different from that provided in the country in which the machine was purchased.

Under IWS, warranty service will be provided with the prevailing warranty service type and service level available for the IWS-eligible machine type in the servicing country and the warranty period observed will be that of the country in which the machine was purchased.

To determine the eligibility of your machine and to view a list of countries where service is available, visit

For more information on IWS, refer to 601-034 , dated September 25, 2001.

Warranty service upgrades: During the warranty period, warranty service upgrades provide an enhanced level of on-site service for an additional charge. A warranty service upgrade must be purchased during the warranty period and is for a fixed term (duration). It is not refundable or transferable and may not be prorated. If required, IBM will provide the warranty service upgrade enhanced level of on-site service acquired by the customer. Service levels are response time objectives and are not guaranteed.

IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability.

On-site service: IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. The following service selections are available as warranty upgrades for your machine.

  • 9 hours per day, Monday through Friday, excluding holidays, 4-hour average, same-business-day response

CRUs may be provided as part of the machine's standard warranty CRU Service except that you may install a CRU yourself or request IBM installation, at no additional charge, under one of the On-site Service levels specified. For additional information on the CRU Service, refer to the warranty information.

Maintenance services: If required, IBM provides repair or exchange service depending on the types of maintenance service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically, via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response time objectives and are not guaranteed. The specified level of maintenance service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information. The following service selections are available as maintenance options for your machine type.

On-site service: IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM Machine. The area must be clean, well-lit, and suitable for the purpose.

  • 24 hours per day, 7 days a week, 4-hour average response

CRU service: If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, or HDD), and depending upon the maintenance service offerings in your geography, IBM will ship the CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request.

Based upon availability, CRUs will be shipped for next-business-day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, return instructions and a container are shipped with the replacement CRU and you may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement.

CRUs may be provided as part of the machine's standard maintenance service except that you may install a CRU yourself or request IBM installation, at no additional charge, under any of the On-site Service levels specified.

Usage plan machine: No

IBM hourly service rate classification: Two

When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order.

Field-installable features: Yes

Model conversions: No

Machine installation: Customer setup. Customers are responsible for installation according to the instructions IBM provides with the machine.

Graduated program license charges apply: No

Educational allowance

A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance.

The educational allowance is 5% for the products in this announcement.
 
Back topBack to top
 

Prices

For current prices, contact us at 1-888-Shop-IBM or visit

The following are newly announced features on the specific models of the BladeCenter 7989 machine type:

                                                 Initial/
                                                 MES/
                                       Feature   Both/        RP
Description                            number    Support  CSU MES
 
 
IBM BladeCenter H Chassis                                 Yes
IBM Express Seller Indicator           0050      Initial  N/A No
BladeCenter Chassis content specify    0291      Initial  N/A No
 -- 7998-J21
Assembled in USA                       0983      Initial  N/A No
External USB 1.44 MB Diskette Drive    2591      Both     Yes No
QLogic SAN Doctor for BladeCenter      3178      Both     Yes No
QLogic Fabric Security for BladeCenter 3181      Both     Yes No
QLogic Enterprise Fabric Suite 2007
 2207 for BladeCenter                  3183      Both     Yes No
 Major Release Upgrade for BladeCenter 3194      MES      Yes No
QLogic Fabric Manager Support Renewal  3199      MES      Yes No
 for BladeCenter
BladeCenter H 2900W AC Power Module    3200      Both     Yes No
 w/Fan Pack
BladeCenter KVM/Advanced Management    3201      Both     Yes No
 Module
QLogic 4Gb 20-port Fibre Chan Switch   3202      Both     Yes No
 Module for IBM eServer® BC
QLogic 4Gb 10-port Fibre Chan Switch   3203      Both     Yes No
 Module for IBM eServer BC
Brocade 20-port 4 Gb SAN Switch        3206      Both     Yes No
 Module for BladeCenter
Brocade 10-port 4 Gb SAN Switch        3207      Both     Yes No
 Module for BladeCenter
McDATA 20 Port 4Gb FC Switch Module    3208      Both     Yes No
 for BladeCenter
McDATA 10 Port 4Gb FC Switch Module    3209      Both     Yes No
 for BladeCenter
Nortel 10 Gigabit Uplink Ethernet      3210      Both     Yes No
 Switch Module for BladeCenter
Nortel Networks Layer 2-7 GbE Switch   3211      Both     Yes No
 Module for BladeCenter
Nortel Networks Layer 2/3 Copper       3212      Both     Yes No
 Gigabit Ethernet Switch Modules for
 BladeCenter
Nortel Networks Layer 2/3 Fiber        3213      Both     Yes No
 Gigabit Ethernet Switch Modules for
 BladeCenter
Cisco Systems Fiber Intelligent        3214      Both     Yes No
 Gigabit Ethernet Switch Module
Cisco Systems Intelligent GbE Switch   3215      Both     Yes No
 Module for BladeCenter
Cisco 4xIB Switch Module for           3217      Both     Yes No
 BladeCenter
BladeCenter Optical Passthru Module    3218      Both     Yes No
BladeCenter Copper Pass-thru Module    3219      Both     Yes No
Server Connectivity Module for         3220      Both     Yes No
 BladeCenter
BladeCenter OPM SC Cable               3221      Both     Yes No
BladeCenter OPM LC Cable               3222      Both     Yes No
BladeCenter Copper Pass-thru           3223      Both     Yes No
 Module Cable
InfiniBand 4M 12x Cable for            3224      Both     Yes No
 BladeCenter
InfiniBand 8M 4X Cable for BladeCenter 3225      Both     Yes No
InfiniBand 8M 12X to (3) 4X Cable      3226      Both     Yes No
 for BladeCenter
InfiniBand 19M 4X Cable for            3227      Both     Yes No
 BladeCenter
InfiniBand 11M 12X to (3) 4X Cable     3228      Both     Yes No
 for BladeCenter
Brocade 10-Port Upgrade for            3229      MES      Yes No
 BladeCenter 4 Gb Module
QLogic/McDATA 10-Port Upgrade          3230      MES      Yes No
 
 for BladeCenter
IBM 10 Gb Ethernet
 850nm Fiber XFP Transceiver           3231      Both     Yes No
 1310nm Fiber XFP Transceiver          3232      Both     Yes No
InfiniBand 3M 4X Cable for BladeCenter 3233      Both     Yes No
InfiniBand 3M 12X-(3) 4X Cable for     3234      Both     Yes No
 BladeCenter
BladeCenter H Serial Port Breakout     3235      Both     Yes No
 Cable
IBM Short Wave(R) SFP Module           3236      Both     Yes No
IBM Long Wave SFP Module               3237      Both     Yes No
IBM Short Wave SFP Module, 4 Gb        3238      Both     Yes No
Multi-Switch Interconnect Module for   3239      Both     Yes No
 BladeCenter
Cisco Systems 4 Gb
 10 Port Fibre Channel Switch Module   3241      Both     Yes No
 20 Port Fibre Channel Switch Module   3242      Both     Yes No
QLogic 10-port 4 Gb SAN Switch Module  3243      Both     Yes No
 for BladeCenter
QLogic 20-port 4 Gb SAN Switch Module  3244      Both     Yes No
 for BladeCenter
QLogic 4 Gb Intelligent Pass-thru      3245      Both     Yes No
 Module for BladeCenter
QLogic 20-Port Full fabric License     3258      MES      Yes No
 for BladeCenter
Cisco Systems 10-Port License Upgrade  3259      MES      Yes No
 for BladeCenter 4 Gb Module
Cisco Systems 4 Gb                     3261      Both     Yes No
 Short-wave Length SFP Module
Cisco Systems 4 Gb                     3262      Both     Yes No
 Long-wave Length SFP Module
 
Note: THESE FEATURES ARE SUBJECT TO AN $8.00 ELECTRONIC
      WASTE RECYCLING FEE (15-INCH TO 34-INCH VIDEO DEVICE.)
 
IBM T120 Flat Panel Monitor            3643      Both     Yes No
IBM T119 Flat Panel Monitor            3644      Both     Yes No
IBM T117 Flat Panel Monitor            3645      Both     Yes No
6-Foot Extender Cable for Displays     4242      Both     Yes No
 (15-pin D-shell to 15-pin D-shell)
Extender Cable -- USB Keyboards, 2M    4256      Both     Yes No
Rack Integration Services: BP only     4648      Initial  N/A No
Rack Integration Services              4649      Initial  N/A No
 

One and only one rack indicator features is required on
all orders (#4650 to #4666).

 
Rack Indicator- Not Factory Integrated 4650      Initial  N/A No
Rack Indicator, Rack #1                4651      Initial  N/A No
Rack Indicator, Rack #2                4652      Initial  N/A No
Rack Indicator, Rack #3                4653      Initial  N/A No
Rack Indicator, Rack #4                4654      Initial  N/A No
Rack Indicator, Rack #5                4655      Initial  N/A No
Rack Indicator, Rack #6                4656      Initial  N/A No
Rack Indicator, Rack #7                4657      Initial  N/A No
Rack Indicator, Rack #8                4658      Initial  N/A No
Rack Indicator, Rack #9                4659      Initial  N/A No
Rack Indicator, Rack #10               4660      Initial  N/A No
Rack Indicator, Rack #11               4661      Initial  N/A No
Rack Indicator, Rack #12               4662      Initial  N/A No
Rack Indicator, Rack #13               4663      Initial  N/A No
Rack Indicator, Rack #14               4664      Initial  N/A No
Rack Indicator, Rack #15               4665      Initial  N/A No
 
Rack Indicator, Rack #16               4666      Initial  N/A No
BladeCenter chassis specify,
 Chassis #1                            4681      Initial  N/A No
 Chassis #2                            4682      Initial  N/A No
 Chassis #3                            4683      Initial  N/A No
 Chassis #4                            4684      Initial  N/A No
 Chassis #5                            4685      Initial  N/A No
 Chassis #6                            4686      Initial  N/A No
 Chassis #7                            4687      Initial  N/A No
 Chassis #8                            4688      Initial  N/A No
 Chassis #9                            4689      Initial  N/A No
Custom Service Specify                 5001      Both     Yes No
Full Width Quiet Touch Keyboard -- USB,
 U.S. English, #103P                   5951      Both     Yes No
 French, #189                          5952      Both     Yes No
 Italian, #142                         5953      Both     Yes No
 German/Austrian, #129                 5954      Both     Yes No
 UK English, #166P                     5955      Both     Yes No
 Spanish, #172                         5956      Both     Yes No
 Japanese, #194                        5957      Both     Yes No
 Brazilian Portuguese, #275            5958      Both     Yes No
 Hungarian, #208                       5959      Both     Yes No
 Korean, #413                          5960      Both     Yes No
 Chinese, #467                         5961      Both     Yes No
 French Canadian, #445                 5962      Both     Yes No
 Canadian French, #058                 5963      Both     Yes No
 Belgian/UK, #120                      5964      Both     Yes No
 Swedish/Finnish, #153                 5965      Both     Yes No
 Danish, #159                          5966      Both     Yes No
 Bulgarian, #442                       5967      Both     Yes No
 Swiss/French/German, #150             5968      Both     Yes No
 Norwegian,#155                        5969      Both     Yes No
 Dutch, #143                           5970      Both     Yes No
 Portuguese, #163                      5971      Both     Yes No
 Greek, #319                           5972      Both     Yes No
 Hebrew, #212                          5973      Both     Yes No
 Polish, #214                          5974      Both     Yes No
 Slovakian, #245                       5975      Both     Yes No
 Czech, #243                           5976      Both     Yes No
 Turkish, #179                         5977      Both     Yes No
 LA Spanish, #171                      5978      Both     Yes No
 Arabic, #253                          5979      Both     Yes No
 Thai, #191                            5980      Both     Yes No
 Russian, #443                         5981      Both     Yes No
 Slovenian, #234                       5982      Both     Yes No
 U.S. English Euro, #103P              5983      Both     Yes No
 
Power cord -- BladeCenter chassis to   6673      Both     Yes No
 IBM PDU, 2.8M, 200-240V, 3X
 IEC320 C20
Power cord -- 4.3M, 200-240V,
 2X NEMA L6-30P                        6674      Both     Yes No
 2X KSC3805 30A                        6675      Both     Yes No
 1X IEC309 32A                         6676      Both     Yes No
Power Cord -- BladeCenter chassis to   6677      Both     Yes No
 OEM PDU/Wall, 4.3M, 200-240V,
 1X AS/NZS 3112 32A
IBM BladeCenter H Publications,
 English                               8534      Both     Yes No
 UK English                            8535      Both     Yes No
 Japan/English                         8536      Both     Yes No
 French                                8537      Both     Yes No
 German                                8538      Both     Yes No
 Spanish                               8539      Both     Yes No
 Italian                               8540      Both     Yes No
 Japanese                              8541      Both     Yes No
 Chinese                               8542      Both     Yes No
 Simplified Chinese                    8543      Both     Yes No
 Korean                                8544      Both     Yes No
 Brazilian Portuguese                  8545      Both     Yes No
Mouse -- USB, Business Black with      8841      Both     Yes No
 Keyboard Attachment Cable
Order Routing Indicator- System Plant  9169      Initial  N/A No

For ServiceElect (ESA) maintenance service charges, contact IBM Global Services at 888-IBM-4343 (426-4343).

IBM Global Financing: IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Offerings include financing for IT acquisition, including hardware, software, and services, from both IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit

IBM Global Financing offerings are provided through IBM Credit LLC in the United States, and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice.

Financing solutions from IBM Global Financing can help you stretch your budget and affordably acquire the new product. But beyond the initial acquisition, our end-to-end approach to IT management can also help keep your technologies current, reduce costs, minimize risk, and preserve your ability to make flexible equipment decisions throughout the entire technology life cycle.
 
Back topBack to top
 

Order now

To order, contact the Americas Call Centers or your local IBM representative.

To identify your local IBM representative, call 800-IBM-4YOU (426-4968).

 Phone:      800-IBM-CALL (426-2255)
 Fax:        800-2IBM-FAX (242-6329)
 Internet:   callserv@ca.ibm.com
 Mail:       IBM Americas Call Centers
             Dept. Teleweb Customer Support, 9th floor
             105 Moatfield Drive
             North York, Ontario
             Canada M3B 3R1
 
 Reference:  YE001

The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.

Note: Shipments will begin after the planned availability date.

Trademarks

 
Electronic Service Agent is a trademark of International Business Machines Corporation in the United States or other countries or both.
 
BladeCenter, eServer, and Wave are registered trademarks of International Business Machines Corporation in the United States or other countries or both.
 
Other company, product, and service names may be trademarks or service marks of others.

Back to topBack to top
 

 
Printable version Printable version