IBM Maximo Asset Management for Energy Optimization V7.1 provides visibility to enterprise assets that are being monitored

IBM Asia Pacific Software Announcement AP09-0228
July 28, 2009

 
 ENUSAP09-0228.PDF (127KB)

Table of contents   Document options  
At a glance At a glance Offering Information Offering Information
Overview Overview Publications Publications
Key prerequisites Key prerequisites Technical information Technical information
Planned availability dates Planned availability dates Ordering information Ordering information
Description Description Terms and conditions Terms and conditions
Availability of national languages Availability of national languages  IBM  Electronic Services IBM Electronic Services
Program number Program number Prices Prices
Education support Education support AP distribution AP distribution
 
Printable version Printable version

 
Top rule
At a glance
Bottom rule

IBM® Maximo® Asset Management for Energy Optimization V7.1:

  • Helps to provide a visual representation based on thermal data
  • Lets you capture and evaluate humidity (including up and down status)
  • Lets users make more proactive business decisions based on this data

 
Back to topBack to top
 
Top rule
Overview
Bottom rule

IBM Maximo Asset Management for Energy Optimization V7.1 provides users with access to real time metrics, and to the history associated with the assets that those metrics are being collected against, as well as full service management capabilities. Users can make more proactive business decisions based on this data. Temperature data is represented as contours on a floor plan and additional information such as humidity and up or down status can also be captured and evaluated with the condition monitoring capabilities.

By capturing real-time data through IBM Tivoli® Monitoring for Energy Management and associating it with an asset record in Maximo, hot spots within a data center can not only be quickly identified through a visual floormap, but the complete asset history and access to service management capabilities allow for a timely resolution to anomalies.


 
Back to topBack to top
 
Top rule
Key prerequisites
Bottom rule

Refer to the Hardware requirements and Software requirements sections.


 
Back to topBack to top
 
Top rule
Planned availability dates
Bottom rule

August 14, 2009: Electronic media
September 4, 2009: Physical media

 
Back to topBack to top
 
Top rule
Description
Bottom rule

IBM Maximo Asset Management for Energy Optimization V7.1 is offered along with IBM Tivoli Monitoring for Energy Management, and performs real-time data collection of various metrics from a data center or facility assets such as temperature, humidity, or status. Hardware information is captured in Maximo using deployed assets functionality, and metric data is stored as meter history and associated with those assets. This information is displayed graphically on a floor map where areas that have readings above or below normal will be made apparent to the end user. Users can also be notified using condition monitoring and escalation capabilities that are available within Maximo. Once areas that may be problematic have been identified, details of the asset and actions to create service requests or work orders are available to the end user so that a resolution can be pursued.

Accessibility by people with disabilities

A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) containing details on accessibility compliance can be requested at

http://www.ibm.com/able/product_accessibility/index.html

 
Back to topBack to top
 
Top rule
Availability of national languages
Bottom rule

IBM Maximo Asset Management for Energy Optimization V7.1 is enabled to support all language environments and is translated into the following languages on the dates shown below.

Group 1 languages

  • English
  • German
  • Italian
  • French
  • Spanish
  • Brazilian Portuguese
  • Japanese
  • Korean
  • Simplified Chinese
  • Traditional Chinese

Group 2 languages

  • Czech
  • Danish
  • Dutch
  • Hungarian
  • Norwegian
  • Polish
  • Russian
  • Swedish

Group 3 languages

  • Croatian
  • Slovenian

 
Back to topBack to top
 
Top rule
Program number
Bottom rule

Program                Program
number         VRM     name
 
5724-Y74       7.1     IBM Maximo Asset Management for Energy
                       Optimization

 
Back to topBack to top
 
Top rule
Education support
Bottom rule

Comprehensive education for IBM Tivoli products is offered through Worldwide Tivoli Education Delivery Services. A wide range of training options are available, including classes led by instructors, learning on demand, on-site training, and blended learning solutions.

For additional information, visit

http://www-306.ibm.com/software/tivoli/education/

 
Back to topBack to top
 
Top rule
Offering Information
Bottom rule

Product information is available via the Offering Information Web site

http://www.ibm.com/common/ssi

Also, visit the Passport Advantage® Web site

http://www.ibm.com/software/passportadvantage

 
Back to topBack to top
 
Top rule
Publications
Bottom rule

No publications are shipped with this program.


 
Back to topBack to top
 
Top rule
Technical information
Bottom rule

Specified operating environment

Hardware requirements

Hardware:

  • Intel® Pentium-based processor
  • 2 GB Ram
  • SVGA 1024 x 768 resolution (1280 x 1024 if used for Application Designer)

Software:

  • Microsoft® Windows® XP or Windows Vista
  • Microsoft Internet Explorer 6.0 browser
  • Microsoft Internet Explorer 7.0 browser
  • Mozilla Firefox 3.0.x 9
  • Adobe® Acrobat Reader 6.0

Application Server: The server where you install IBM WebSphere® Application Server Network Deployment or Oracle BEA WebLogic Application Server and typically, where you deploy Maximo EAR files.

Hardware:

  • Two to four dedicated 800 MHz processors
  • Two GB RAM per processor
  • 1.5 GB (or greater) disk space for Maximo, and the Java™ and Web server components

Software:

  • IBM Maximo Asset Management V7.1
  • Microsoft Windows 2003 Server (32 bit and 64 bit)
  • Microsoft Windows 2008 Server (32 bit and 64 bit)
  • IBM AIX® V5.3, V6.1 (32 bit and 64 bit)
  • Red Hat Enterprise Linux® V4 (32 bit); V4, V5, Linux on System z® (x86 processor-based systems)
  • Sun Solaris V9 or Sun Solaris V10 (SPARC processor-based systems)
  • HP-UX 11i V3 (Itanium®)
  • SUSE 9, 10 Linux on System z

Note: You cannot use Sun Solaris operating systems if you are running IBM Maximo V7.1 on an IBM DB2 Universal Database™.

Database Server: The server where you install database software to create and maintain your Maximo database. You are responsible for maintaining the database platform software.

Hardware

Refer to the database vendor documentation for hardware specifications.

Software:

  • IBM DB2 Universal Database V8.2.8, V9.1.3, or V9.5
    • Workgroup or Enterprise Edition
    • Configured for TCP/IP support
    • V9.5 only support on Windows 2008
  • Oracle V9.2.0.8, or V10.2.0.3, or V10.1.0.5
    • Standard or Enterprise edition
  • Microsoft SQL Server 2005 SP2 or 2008
    • Standard or Enterprise edition
Software requirements

IBM Maximo Asset Management for Energy Optimization requires having IBM Tivoli Monitoring for Energy Management V6.2.1 installed.

The program's specifications and specified operating environment information may be found in documentation accompanying the program, if available, such as a README file, or other information published by IBM, such as an announcement letter. Documentation and other program content may be supplied only in the English language.

Planning information

Packaging

IBM Maximo Asset Management for Energy Optimization V7.1 is distributed with:

  • International Program License Agreement (Z125-3301)
  • License Information document
  • CD ROM
  • Publications (refer to the Publications section)

This program, when downloaded from a Web site, contains the applicable IBM license agreement and License Information, if appropriate, and will be presented for acceptance at the time of installation of the program. For future reference, the license and License Information will be stored in a directory such as LICENSE.TXT.

Security, auditability, and control

IBM Maximo Asset Management for Energy Optimization V7.1 uses the security and auditability features of the operating system software and the Tivoli Management Framework. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communication facilities.

IBM Tivoli Enhanced Value-Based Pricing

IBM Tivoli software products are priced using IBM Tivoli's Enhanced Value-Based Pricing. The Enhanced Value-Based Pricing system is based upon the IBM Tivoli Environment-Managed Licensing Model, which uses a managed-environment approach -- whereby price is determined by what is managed rather than the number and type of product components installed.

For example, all servers monitored with IBM Tivoli's monitoring product (IBM Tivoli Monitoring) require entitlements sufficient for those servers. Other Tivoli products may manage clients, client devices, agents, network nodes, users, or other items, and are licensed and priced accordingly.

Unlike typical systems management licensing models that require entitlements of specific software components to specific systems, the IBM Tivoli Environment-Managed Licensing Model provides the customer flexibility to deploy its IBM Tivoli software products within its environment in a manner that can address and respond to the customer's evolving architecture. That is, as the architecture of a customer's environment changes, the customer's implementation of IBM Tivoli software can be altered, as needed, without affecting the customer's license requirements (as long as the customer does not exceed its entitlements to the software).

Under Enhanced Value-Based Pricing, licensing and pricing of server-oriented applications are determined based upon the server's use in the customer's environment. Typically, such applications are licensed and priced in a manner that corresponds to each installed and activated processor of the server managed by the IBM Tivoli application to help correlate price to value while offering a simple solution.

Where a server is physically partitioned, this approach is modified. This partitioning technique is the approach used with systems that have either multiple cards or multiple frames, each of which can be configured independently. For servers capable of physical partitioning (for example, IBM System p® Scalable POWERparallel Systems® servers, Sun Ultra servers, and HP Superdome servers), an entitlement is required for each processor in the physical partition being managed by the Tivoli application. For example, assume that a server has 24 processors installed in aggregate. If this server is not partitioned, entitlements are required for all 24 processors. If, however, it is physically partitioned into three partitions, each containing eight processors, and Tivoli products were managing only one of the three partitions, then entitlements would be required for the eight processors on the physical partition managed by the IBM Tivoli application.

For servers with virtual or logical partitions, entitlements are required for all installed and activated processors on the server. For each IBM Tivoli application managing a clustered environment, licensing is based on the cumulative number of installed and activated processors on each server in the cluster. Where the cluster includes physically partitioned servers, the considerations described above concerning physically partitioned servers apply as well.

Enhanced Value-Based Pricing recognizes the convergence of RISC and UNIX®, and Microsoft Windows and Intel technologies, in order to simplify your licensing requirements, and to provide a smoother, more scalable model. Pricing and licensing does not differentiate between non-System z server platforms or operating systems. For some products, this platform neutrality extends to System z and other host servers as well.

IBM Tivoli Enhanced Value-Based Pricing terminology definitions

Authorized user

An authorized user is one and only one individual (named or unnamed) within or outside your enterprise. A Proof of Entitlement (PoE) must be obtained for each individual user accessing the program in any manner. A program licensed under an authorized user PoE may be installed on a single computer or server, and accessed by multiple users, provided that a PoE has been obtained for each individual user accessing the program either directly or indirectly (via a multiplexing program, device, or application server) through any means on behalf of the user.

Note that authorized users have unique specific identity and IDs cannot be shared. An ID can establish one or more connections and count as a single authorized user. Specific information to security products:

  • An authorized user of IBM Tivoli Federated Identity Manager is any ID that accesses an application or service managed or protected by IBM Tivoli Federated Identity Manager.
  • An authorized user of IBM Tivoli Directory Integrator is one whose identity can be synchronized by IBM Tivoli Directory Integrator or that can access a connected system that can be synchronized by IBM Tivoli Directory Integrator.
  • An authorized user of IBM Tivoli Identity Manager is any ID whose identity is recorded in the Tivoli Identity Manager identity store.
  • An authorized user of IBM Tivoli Access Manager for e-business is any ID that accesses an application or service managed or protected by IBM Tivoli Access Manager for e-business.

Client device or client

A client device is a computing device that requests the execution of a set of commands, procedures, or applications from another computer system that is typically referred to as a server. Multiple client devices may share access to a common server. A client device generally has some processing capability or is programmable to allow a user to do work. Examples include, but are not limited to, notebook computers, desktop computers, desk side computers, technical workstations, appliances, automated teller machines, point-of-sale terminals, tills and cash registers, and kiosks.

Engine

An engine is also referred to as a central processor (CP) or processor. Engines for traditional workloads are called General Purpose CPs. Engines for Linux workloads are called Integrated Facility for Linux (IFL) engines or Linux-only engines. Engines for Coupling Facility workloads are called ICF engines.

Enterprise

An enterprise is a person or single entity and those subsidiaries with more than 50 percent ownership.

External user

An external user is an authorized user who is not part of the enterprise.

IBM IFL

This optional facility enables additional processing capacity exclusively for Linux workload, with no effect on the model designation of a System z or OS/390® server. Consequently, executing Linux workload on the IBM IFL will not, in most cases, result in any increased IBM software charges for z/OS®, OS/390, VM, VSE, or TPF operating systems and applications. There is, as indicated, a charge associated with the IFL, and there may also be a charge for applications which run on the IFL.

The IFL may be dedicated to a single Linux-mode logical partition or it may be shared by multiple Linux-mode logical partitions. Installations should note that the Linux workspace enabled by this facility will not support any of the traditional S/390® operating systems (OS/390, TPF, VSE, or VM). Only Linux applications or Linux operating in conjunction with the Virtual Image Facility, an environment that operates within a logical partition or in native S/390 mode and provides the capability to create multiple Linux images, are supported by IBM S/390 IFL.

IBM Tivoli Directory Integrator connected system

A connected system is any directory, database, application, or file integrated or merged by IBM Tivoli Directory Integrator.

IBM Tivoli Storage Manager HSM for Windows terabyte (TB) capacity

IBM Tivoli Storage Manager HSM for Windows TB capacity includes primary HSM disk storage pool size combined with the amount of utilized HSM removable media storage pool. Storage pools are configured on the IBM Tivoli Storage Manager server.

IBM System Storage™ Archive Manager TB capacity

IBM System Storage Archive Manager TB capacity includes primary disk storage pool size combined with the amount of utilized primary removable media storage used by the IBM System Storage Archive Manager server.

Capacity does not include:

  • Copy storage pools for the space-managed data that reside on disk.
  • Copy storage pools for the space-managed data that reside on removable media.
  • Space used on the IBM Tivoli Storage Manager server for any purpose other than the primary storage of space-managed data.
  • Disk on the host being space managed.

A virtual tape library (VTL) is considered a removable media device, so capacity is based on utilization.

The minimum amount of capacity that can be purchased is 1 TB.

Partial capacity will be rounded up to the next whole number of TB.

Additional capacity must be added in increments of 1 TB.

IBM TotalStorage® Productivity Center TB capacity

A TB capacity is each individual TB of storage capacity managed by the IBM TotalStorage Productivity Center products. Managed capacity for the IBM TotalStorage Productivity Center for Replication and IBM TotalStorage Productivity Center for Replication Two Site BC is defined as the source device capacity. Only the source device capacity is included in this pricing definition (not the target device).

Managed processor (charging under full capacity in the managed environment)

Managed processor charges are based on the active processors on the machines in the computing environment affiliated with the program rather than on the server where the program is run. The managed processors which require PoEs are defined in the License Information's program-unique terms.

Notes:

  1. IBM defines a physical processor in a computer as a functional unit that interprets and executes instructions. A physical processor consists of at least an instruction control unit and one or more arithmetic and logic units.
  2. Multicore technology allows two or more processors (commonly called cores) to be active on a single silicon chip. With multicore technology, IBM considers each core to be a physical processor. For example, in a dual-core chip, there are two physical processors residing on the single silicon chip.
  3. The program may not run on some or all of the processors for which PoEs are required by the program's valuation method.
  4. In the System z IFL environment, each IFL engine is considered a single physical processor.
  5. Threading, a technique which makes a single processor seem to perform as two or more, does not affect the count of physical processors.
  6. Where blade technology is employed, each blade is considered a separate server and charging is based upon the total number of processors on the blades with which the program is affiliated.
  7. Not all processors require the same number of Value Unit entitlements. To determine the number of Value Unit entitlements required, refer to the processor Value Unit conversion table on the Passport Advantage Web site:
    http://www.ibm.com/software/passportadvantage

Millions of Service Units (MSUs)

MSU is defined as millions of CPU service units per hour, which is the measure of capacity used to describe the computing power of the hardware processors on which S/390 or System z software runs. Processor MSU values are determined by the hardware vendor, IBM, or Software Compatible Vendors (SCVs).

For more detailed information about System z software pricing, visit

http://www-1.ibm.com/servers/eserver/zseries/library/refguides/sw_ pricing.html

Network node or node

Network nodes include routers, switches, hubs, and bridges that contain a network management agent. A single network node may contain any number of interfaces or ports.

Partitions

A server's resources (CPU, memory, I/O, interconnects, and buses) may be divided according to the needs of the applications running on the server. This partitioning can be implemented with physical boundaries (physical partitions) or logical boundaries (logical partitions).

Physical partitions are defined by a collection of processors dedicated to a workload and can be used with systems that have either multiple cards or multiple frames, each of which can be configured independently. In this method, the partitions are divided along hardware boundaries and processors, and the I/O boards, memory, and interconnects are not shared.

Logical partitions are defined by software rather than hardware and allocate a pool of processing resources to a collection of workloads. These partitions, while separated by software boundaries, share hardware components and run in one or more physical partitions.

Port

A port is the physical connection between a device and the network.

Processor (per processor charging under full capacity)

In full capacity charging, PoEs must be acquired for all activated processors (available for use) that are on the server where the program or a component of the program is run.

Notes:

  1. IBM defines a physical processor in a computer as a functional unit that interprets and executes instructions. A physical processor consists of at least an instruction control unit and one or more arithmetic and logic units.
  2. Multicore technology allows two or more processors (commonly called cores) to be active on a single silicon chip. With multicore technology, IBM considers each core to be a physical processor. For example, in a dual-core chip, there are two physical processors residing on the single silicon chip.
  3. In the System z IFL environment, each IFL engine is considered a single physical processor.
  4. Threading, a technique which makes a single processor seem to perform as two or more, does not affect the count of physical processors.
  5. Where blade technology is employed, each blade is considered a separate server and charging is based upon the total number of processors on the blade on which the program is run.
  6. When a server is shipped with six processors, but two of them are inactive, four processors are active for the customer.
  7. Not all processors require the same number of Value Unit entitlements. To determine the number of Value Unit entitlements required, refer to the processor value unit conversion table on the Passport Advantage Web site
    http://www.ibm.com/software/passportadvantage

Server

A server is a computer system that executes requested procedures, commands, or applications to one or more user or client devices over a network. A PoE must be obtained for each server on which the program or a component of the program is run or for each server managed by the program. Where blade technology is employed, each blade is considered a separate server.

Standby or backup systems

For programs running or resident on backup machines, IBM defines three types of situations: cold, warm and hot. In cold and warm situations, a separate entitlement for the copy on the backup machine is normally not required and typically no additional charge applies. In a hot backup situation, the customer needs to acquire other license or entitlements sufficient for that server. All programs running in backup mode must be solely under the customer's control, even if running at another enterprise's location.

As a practice, the following are definitions and allowable actions concerning the copy of the program used for backup purposes.

Cold: A copy of the program may reside, for backup purposes, on a machine as long as the program is not started. There is no additional charge for this copy.

Warm: A copy of the program may reside for backup purposes on a machine and is started, but is idling, and is not doing any work of any kind. There is no additional charge for this copy.

Hot: A copy of the program may reside for backup purposes on a machine, is started, and is doing work. The customer must acquire a license or entitlements for this copy and there will generally be an additional charge.

Doing work includes, for example, production, development, program maintenance, and testing. It also could include other activities such as mirroring of transactions, updating of files, synchronization of programs, data or other resources (for example, active linking with another machine, program, database or other resource, and so on), or any activity or configurations that would allow an active hot switch or other synchronized switch over between programs, databases, or other resources to occur.

In the case of a program or system configuration that is designed to support a high availability environment by using various techniques (for example, duplexing, mirroring of files, or transactions, maintaining a heartbeat, active linking with another machine, program, database, or other resource), the program is considered to be doing work in the hot situation and a license or entitlement must be purchased.

Terabyte (T/TB)

1 TB of managed storage = 2 to the power of 40 bytes = 1,099,511,627,776 bytes, trillion bytes.

Tivoli Management Points

A Tivoli Management Point is a metric used to compute license quantities and is program specific.

Value Units

A Value Unit is a pricing charge metric for program license entitlements, which is based upon the quantity of a specific designated measurement used for a given program. Each program has a designated measurement. The most commonly used designated measurements are processor cores and MSUs. However, for select programs, there are other designated measurements such as servers, users, client devices, and messages. The number of Value Unit entitlements required for your specific implementation of the given program must be obtained from a conversion table associated with the program. You must obtain a PoE for the appropriate number of Value Unit entitlements for your implementation. The Value Unit entitlements of a given program cannot be exchanged, interchanged, or aggregated with Value Unit entitlements of another program. Whenever the designated measurement is a processor core, not all processors require the same number of Value Unit entitlements. To determine the number of Value Unit entitlements required, refer to the processor value unit conversion table on the Passport Advantage Web site

http://www.ibm.com/software/passportadvantage

Product and licensing Web sites

A complete list of IBM Tivoli products is available at

http://www.ibm.com/software/tivoli

IBM Tivoli product licensing documents are available at

http://www.ibm.com/software/tivoli/products/licensing.html

Passport Advantage

Through the Passport Advantage Agreement, you may receive discounted pricing based on their total volume of eligible products, across all IBM brands, acquired worldwide. The volume is measured by determining the total Passport Advantage points value of the applicable acquisitions. Passport Advantage points are only used for calculating the Entitled Passport Advantage discount.

To determine the required IBM Tivoli product configuration under Passport Advantage, the IBM Tivoli Enhanced Value-Based Pricing Model applies. The customer's environment is evaluated on a per-product basis.

Use the following two-step process to determine the total Passport Advantage points value:

  1. Analyze your environment to determine the number of charge units for a product. The quantity of each product's part numbers to be ordered is determine by that analysis.
  2. Order the Passport Advantage part numbers. A Passport Advantage point value, which is the same worldwide for a specific part number regardless of where the order is placed, is assigned to each IBM Tivoli product part number. The Passport Advantage point value for the applicable part number, multiplied by the quantity for that part number, will determine the Passport Advantage points for that IBM Tivoli product part number. The sum of these Passport Advantage points determines the Passport Advantage point value of the applicable IBM Tivoli product authorizations which then may be aggregated with the point value of other applicable Passport Advantage product acquisitions to determine the total Passport Advantage points value.

The discounted pricing available through Passport Advantage is expressed in the form of Suggested Volume Prices (SVPs), which vary depending on the SVP level. Each SVP level is assigned a minimum total Passport Advantage point value, which must be achieved, in order to qualify for that SVP level.

Media packs and documentation packs do not carry Passport Advantage points and are not eligible for SVP discounting.

For additional information on Passport Advantage, refer to the following

http://www.ibm.com/software/passportadvantage

The following Passport Advantage part number categories may be orderable:

  • License and Software Maintenance 12 Months - This is the product authorization with maintenance to the first anniversary date.
  • Annual Software Maintenance Renewal - This is the maintenance renewal for one anniversary that applies when a customer renews their existing coverage period prior to the anniversary date at which it expires.
  • Software Maintenance Reinstatement 12 months - This is for customers who have allowed their Software Maintenance to expire, and later wish to reinstate their Software Maintenance.
  • Media packs - These are the physical media, such as CD-ROMs, that deliver the product's code.
  • Documentation packs - These contain printed documentation such as the User's Guide and Release Notes.

Distributed pricing examples

The following examples are provided to illustrate your licensing requirements.

References to processor-based licensing do not represent the actual number of entitlements required. Entitlement requirements are Value Unit based, with the exception of IBM Tivoli Storage Manager. Processors referenced in these examples represent the designated measurement on which the required number of Value Unit entitlements will be calculated. The number of Value Units required per processor will depend on the processor type. For more information, refer to the Value Unit definition in IBM Tivoli Enhanced Value-Based Pricing terminology definitions. To determine the number of Value Unit entitlements required per processor, refer to the processor Value Unit conversion table on the Passport Advantage Web site

http://www.ibm.com/software/passportadvantage

References to all other non-processor-based metrics do represent the actual number of entitlements required, unless other designated measurements are referenced or unless otherwise specified.

IBM Tivoli Enhanced Value-Based Pricing terminology

IBM Maximo software products are priced using IBM Tivoli's Enhanced Value-Based Pricing. Enhanced Value-Based Pricing system is based upon the IBM Tivoli Environment-Managed Licensing Model, which uses a managed-environment approach under which price of a product component is determined by what is managed by the product component, rather than the number and type of components installed. For example, all servers monitored with IBM Tivoli's monitoring product (IBM Tivoli Monitoring) require entitlements sufficient for those servers. Other Tivoli products may manage clients, client devices, agents, network nodes, users, or other items, and are licensed and priced accordingly.

Unlike typical systems management licensing models that require entitlements to specific software components for specific systems, the IBM Tivoli Environment-Managed Licensing Model provides the customer the flexibility to deploy its IBM Tivoli software products within its environment in a manner that can address and respond to the customer's evolving architecture. That is, as the architecture of a customer's environment changes, the customer's implementation of IBM Tivoli software can be altered, as needed, without affecting the customer's license requirements (as long as the customer does not exceed its overall entitlement to the software).

Under Enhanced Value-Based Pricing, licensing and pricing of server- oriented applications are determined based upon the server's use in the customer's environment. Typically, such applications are licensed and priced in a manner that corresponds to each installed and activated processor of the server managed by the IBM Tivoli application to help correlate price to value while offering a simpler solution.

Enhanced Value-Based Pricing recognizes the convergence of RISC and UNIX, Microsoft Windows, and Intel technologies, in order to simplify your licensing requirements, and to provide a smoother, more scalable model. Pricing and licensing does not differentiate between non-System z server platforms or operating systems. For some products, this platform neutrality extends to System z and other host servers as well.

IBM Tivoli Enhanced Value-Based Pricing terminology definitions

Authorized user: An authorized user is one and only one individual (named or unnamed) within or outside your enterprise. A Proof of Entitlement (PoE) must be obtained for each individual user accessing the program in any manner. A program licensed under an authorized user PoE may be installed on a single computer or server, and accessed by multiple users, provided that a PoE has been obtained for each individual user accessing the program either directly or indirectly (via a multiplexing program, device, or application server) through any means on behalf of the user.

Note: Authorized users have unique specific identity and IDs cannot be shared. An ID can establish one or more connections and count as a single authorized user.

Install: An install is a copy or instance of the program in the enterprise.

Pricing examples

The pricing example below should be used to determine required license entitlements for the following distributed products.

IBM Maximo Asset Management for Energy Optimization is licensed per asset and per install. IBM Maximo Asset Management for Energy Optimization is priced based on the managed environment approach. For example, to manage the Assets in the environment described below requires the following licenses:

                           Quantity
                           in customer       Assets to
Asset managed              environment       be licensed
 
2-way server               10                10
4-way server                8                 8
IBM System z series 900     1                 1
Uninterruptible             1                 1
power system 
Generator                   1                 1
Power distribution units    5                 5
 
Total                                        27
                      Quantity           License
Orderable             in customer        entitlement
component             environment        requirements
 
Install               1                  1

 
Back to topBack to top
 
Top rule
Ordering information
Bottom rule

Product group: Enterprise Asset Management
Product category:  Maximo Asset Management
 
Program          Program
number    VRM    name
 
5724-Y74  7.1.0  IBM Maximo Asset Management for Energy
                 Optimization
 

Current licensees

New licensees

Orders for new licenses will be accepted now.

Shipment will begin on the planned availability date.

Basic license

Ordering information for Passport Advantage

Passport Advantage allows you to have a common anniversary date for Software Maintenance renewals, which can simplify management and budgeting for eligible new versions and releases (and related technical support) for your covered products. The anniversary date, established at the start of your Passport Advantage Agreement, will remain unchanged while your Passport Advantage Agreement remains in effect. New software purchases will initially include twelve full months of Software Maintenance. Software Maintenance in the second year (the first year of renewal) can be prorated to be coterminous with your common anniversary date. Thereafter, all Software Maintenance will renew at the common anniversary date for twelve full months of maintenance.

Refer to the IBM International Passport Advantage Agreement and to the IBM Software Support Handbook for specific terms relating to, and a more complete description of, technical support provided through Software Maintenance.

The quantity to be specified for the Passport Advantage part numbers in the following table.

To order for Passport Advantage, specify the desired product, part number, and quantity desired.

Description                                         Part number
 
MAM for Energy Optimization per Install Lic + SW    D0ANKLL
S&S 12 Mo
 
MAM for Energy Optimization per Install Annual SW   E07LJLL
S&S Rnwl
 
MAM for Energy Optimization per Install SW S&S      D0ANLLL
Reinstate 12 Mo
 
MAM for Energy Optimization per Install Linux       D0ANILL
System z Lic + SW S&S 12 Mo
 
MAM for Energy Optimization per Install Linux       E07LILL
System z Annual SW S&S Rnwl
 
MAM for Energy Optimization per Install Linux       D0ANJLL
System z SW S&S Reinstate 12 Mo
 
MAM for Energy Optimization per Asset Lic + SW      D0ANGLL
S&S 12 Mo
 
MAM for Energy Optimization per Asset Annual SW     E07LHLL
S&S Rnwl
 
MAM for Energy Optimization per Asset SW S&S        D0ANHLL
Reinstate 12 Mo
 
MAM for Energy Optimization per Asset for Linux     D0ANELL
System z Lic + SW S&S 12 Mo
 
MAM for Energy Optimization per Asset for Linux     E07LGLL
System z Annual SW S&S Rnwl
 
MAM for Energy Optimization per Asset for Linux     D0ANFLL
System z SW S&S Reinstate 12 Mo

To order a media pack for Passport Advantage, specify the part number in the desired quantity from the following table:

IBM Maximo Asset Management for Energy Optimization V7.1 (5724-Y74)
 
Media pack description                             Part number
 
IBM Maximo Asset Management for Energy             BJ0T0ML
Optimization Media Pack ML MP

IBM Maximo Asset Management for Energy Optimization V7.1 is also available, via Web download, from Passport Advantage.


 
Back to topBack to top
 
Top rule
Terms and conditions
Bottom rule

The information provided in this announcement letter is for reference and convenience purposes only. The terms and conditions that govern any transaction with IBM are contained in the applicable contract documents such as the IBM International Program License Agreement, IBM International Passport Advantage Agreement, and the IBM Agreement for Acquisition of Software Maintenance.

Licensing

IBM International Program License Agreement including the License Information document and PoE govern your use of the program. PoEs are required for all authorized use. Part number products only, offered outside of Passport Advantage, where applicable, are license only and do not include Software Maintenance.

These programs are licensed under the IBM Program License Agreement (IPLA) and the associated Agreement for Acquisition of Software Maintenance, which provide for support with ongoing access to releases and versions of the program. IBM includes one year of Software Subscription and Support (also referred to as Software Maintenance) with the initial license acquisition of each program acquired. The initial period of Software Subscription and Support (also referred to as Software Maintenance) can be extended by the purchase of a renewal option, if available. These programs have a one-time license charge for use of the program and an annual renewable charge for the enhanced support that includes telephone assistance (voice support for defects during normal business hours), as well as access to updates, releases, and versions of the program as long as support is in effect.

License Information form number

L-SNEP-7S7QSL

The program's License Information will be available for review on the IBM Software License Agreement Web site

http://www.ibm.com/software/sla/sladb.nsf
Limited warranty applies

Yes

Limited warranty

IBM warrants that when the program is used in the specified operating environment, it will conform to its specifications. The warranty applies only to the unmodified portion of the program. IBM does not warrant uninterrupted or error-free operation of the program or that IBM will correct all program defects. You are responsible for the results obtained from the use of the program.

IBM provides you with access to IBM databases containing information on known program defects, defect corrections, restrictions, and bypasses at no additional charge. For further information, consult the IBM Software Support Handbook found at

http://www.ibm.com/support/handbook

IBM will maintain this information for at least one year after the original licensee acquires the program (warranty period).

Program technical support

Technical support of a program product will be available for a minimum of five years from the general availability date, as long as your Software Subscription and Support (also referred to as Software Maintenance) is in effect. This technical support allows you to obtain assistance (via telephone or electronic means) from IBM for product-specific, task-oriented questions regarding the installation and operation of the program product. Software Subscription and Support (Software Maintenance) also provides you with access to updates, releases, and versions of the program. You will be notified, via announcement letter, of discontinuance of support with 12 months' notice. If you require additional technical support from IBM, including an extension of support beyond the discontinuance date, contact your IBM representative or IBM Business Partner. This extension may be available for a fee.

Money-back guarantee

If for any reason you are dissatisfied with the program and you are the original licensee, you may obtain a refund of the amount you paid for it, if within 30 days of your invoice date you return the program and its PoE to the party from whom you obtained it. If you downloaded the program, you may contact the party from whom you acquired it for instructions on how to obtain the refund.

For clarification, note that (1) for programs acquired under the IBM International Passport Advantage offering, this term applies only to your first acquisition of the program and (2) for programs acquired under any of IBM's On/Off Capacity on Demand (On/Off CoD) software offerings, this term does not apply since these offerings apply to programs already acquired and in use by you.

Authorization for use on home/portable computer

The program may be stored on the primary machine and another machine, provided that the program is not in active use on both machines at the same time.

Other terms
Volume orders (IVO)

No

IBM International Passport Advantage Agreement
Passport Advantage applies

Yes, and through the Passport Advantage Web site at

http://www.ibm.com/software/passportadvantage
Usage restriction

Yes

For additional information, refer to the License Information document that is available on the IBM Software License Agreement Web site

http://www.ibm.com/software/sla/sladb.nsf
Software Subscription and Support (Software Maintenance) applies

Yes. Software Subscription and Support (also referred to as Software Maintenance) is included with licenses purchased through Passport Advantage and Passport Advantage Express. Product upgrades and Technical Support are provided by the Software Subscription and Support (Software Maintenance) offering as described in the Agreements. Product upgrades provide the latest versions and releases to entitled software and Technical Support provides voice and electronic access to IBM support organizations, worldwide.

IBM includes one year of Software Subscription and Support (Software Maintenance) with each program license acquired. The initial period of Software Subscription and Support (Software Maintenance) can be extended by the purchase of a renewal option, if available.

While your Software Subscription and Support (Software Maintenance) is in effect, IBM provides you assistance for your routine, short duration installation and usage (how-to) questions, and code-related questions. IBM provides assistance via telephone and, if available, electronic access, only to your information systems (IS) technical support personnel during the normal business hours (published prime shift hours) of your IBM support center. (This assistance is not available to your end users.) IBM provides Severity 1 assistance 24 hours a day, 7 days a week. For additional details, consult your IBM Software Support Handbook at

http://www.ibm.com/support/handbook

Software Subscription and Support (Software Maintenance) does not include assistance for the design and development of applications, your use of programs in other than their specified operating environment, or failures caused by products for which IBM is not responsible under the applicable agreements.

For additional information about the International Passport Advantage Agreement and the IBM International Passport Advantage Express Agreement, visit the Passport Advantage Web site at

http://www.ibm.com/software/passportadvantage
System i Software Maintenance applies

No

Variable charges apply

No

Educational allowance available

Not applicable.

Educational allowance

Not applicable.


 
Back to topBack to top
 
Top rule
IBM Electronic Services
Bottom rule

IBM has transformed its delivery of hardware and software support services to help you achieve higher system availability. Electronic Services is a Web-enabled solution that offers an exclusive, no-additional-charge enhancement to the service and support available for IBM servers. These services are designed to provide the opportunity for greater system availability with faster problem resolution and preemptive monitoring. Electronic Services comprises two separate, but complementary, elements: Electronic Services news page and Electronic Services Agent.

The Electronic Services news page is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems.

The Electronic Service Agent™ is no-additional-charge software that resides on your server. It monitors events and transmits system inventory information to IBM on a periodic, client-defined timetable. The Electronic Service Agent automatically reports hardware problems to IBM. Early knowledge about potential problems enables IBM to deliver proactive service that may result in higher system availability and performance. In addition, information collected through the Service Agent is made available to IBM service support representatives when they help answer your questions or diagnose problems. Installation and use of IBM Electronic Service Agent for problem reporting enables IBM to provide better support and service for your IBM server.

To learn how Electronic Services can work for you, visit

http://www.ibm.com/support/electronic

 
Back to topBack to top
 
Top rule
Prices
Bottom rule

Passport Advantage

For Passport Advantage and charges, contact your IBM representative or your authorized IBM Business Partner. Additional information is also available at

http://www.ibm.com/software/passportadvantage

Business Partner information:

If you are an IBM Business Partner -- Distributor for Workstation Software acquiring products from IBM, you may link to Passport Advantage Online for resellers where you can obtain Business Partner pricing information. An IBM ID and password are required.

http://www.ibm.com/partnerworld/sg/apchannounce/

 
Back to topBack to top
 
Top rule
AP distribution
Bottom rule

Country/Region               Announced
 
AP IOT
 ASEAN*                      Yes
 India/South Asia**          Yes
 Australia                   Yes
 People's Republic of China  Yes
 Hong Kong S.A.R of the PRC  Yes
 Macao S.A.R of the PRC      Yes
 Taiwan                      Yes
 Korea                       Yes
 New Zealand                 Yes
Japan IOT
 Japan                       Yes
 
 * Brunei Darussalam, Indonesia, Cambodia, Lao People's Democratic
 Republic, Malaysia, Philippines, Singapore, Thailand, and Vietnam
 **Bangladesh, Bhutan, India, Sri Lanka, Maldives, Nepal, and
 Afghanistan
Trademarks

DB2 Universal Database, System Storage and Electronic Service Agent are trademarks of IBM Corporation in the United States, other countries, or both.

IBM, Maximo, Tivoli, Passport Advantage, WebSphere, AIX, System z, System p, Scalable POWERparallel Systems, OS/390, z/OS, S/390 and TotalStorage are registered trademarks of IBM Corporation in the United States, other countries, or both.

Intel and Itanium are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States, other countries, or both.

Adobe is a registered trademark of Adobe Systems Incorporated in the United States, and/or other countries.

Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both.

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.

UNIX is a registered trademark of The Open Group in the United States and other countries.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Reference to other products in this announcement does not necessarily imply those products are announced, or intend to be announced, in your country. Additional terms of use are located at:

http://www.ibm.com/legal/us/en/

For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page

http://www.ibm.com/planetwide/

 

Back to topBack to top
 
Bottom grey rule
 
Printable version Printable version