Family 9111+02 IBM IntelliStation Power 285 Workstation

IBM United States Sales Manual
Revised:  October 24, 2017.

Table of contents
TOC Link Product life cycle dates TOC Link Publications
TOC Link Abstract TOC Link Features
TOC Link Highlights TOC Link Accessories
TOC Link Description TOC Link Machine elements
TOC Link Models TOC Link Supplies
TOC Link Technical description  

 
Product life cycle dates
Type Model Announced Available Marketing Withdrawn Service Discontinued
9111-285 2005/10/042005/10/14 2009/01/022018/01/31

Back to topBack to top
 
Abstract

The IBM 9111 IntelliStation POWER 285 workstation combines excellent performance and capacity in a flexible, affordable package. When used with the GXT4500P or GXT6500P 3D graphics accelerator, it is an outstanding choice for high-end Mechanical Computer Aided Design (MCAD), Computer Aided Engineering (CAE), graphic processing, and other floating- point-intensive business and technical applications. Using 2D graphics accelerators, it can be used for less demanding applications such as software development.

Model abstract 9111-285

The IBM 9111 IntelliStation POWER Model 285 workstation is available in a 1-core or 2-core configuration using state-of-the-art, 64-bit, copper-based POWER5+ microprocessors running at either 1.9 GHz or 2.1 GHz, all with 36 MB of L3 cache.

The base 1 GB of main memory can be expanded to 32 GB for faster performance and exploitation of 64-bit addressing as used in large engineering analysis or complex product design applications.

The IBM IntelliStation POWER 285 workstation contains seven bays; four of the bays are front-accessible and hot-swap-capable DASD bays. These four DASD bays can accommodate up to 1200 GB of disk storage. Two of the remaining three bays are used for a DVD-ROM and a DVD-RAM, and the last bay can contain a tape drive.

The POWER 285 workstation supports a full range of graphic input/output devices including the USB SpaceBall Plus 3D, USB SpaceMouse Plus and USB SpacePilot input devices, the T120 20.1-inch TFT flat panel monitor, and other keyboard and mouse devices.
Back to topBack to top
 

Highlights

The IBM IntelliStation POWER 285 workstation offers:

  • Outstanding value for a 3D symmetric multiprocessing (SMP) workstation
  • Excellent performance for 3D CAD/CAM and petroleum visualization applications
  • Powerful analysis workstation for complex computational chemistry, computational fluid dynamics, and structural analysis applications
  • One 1-core or 2-core state-of-the-art, 64-bit POWER5+ processor running at 1.9 or 2.1 GHz
  • Up to 32 GB of memory
  • Up to 1200 GB of internal disk storage
  • Four hot-swap disk bays and six PCI-X slots for feature expandability
  • Two slimline media bays for DVD-ROM and DVD-RAM
  • One media bay for tape drive

Back to topBack to top
 
Description

Integrated features include:

  • Six expansion slots
    • Three hot-swap 133 MHz 64-bit PCI-X slots
    • Two hot-swap 66 MHz 32-bit PCI-X slots
    • One hot-swap DDR 266 MHz 64-bit PCI-X slot
  • Service processor
  • Two 10/100/1000 Ethernet ports
  • IDE controller for connection to internal optical devices
  • Ultra320 SCSI controller with dual ports (internal) and optional RAID adapter
  • Two system ports and two USB ports
  • Two HMC ports
  • Hot-swap cooling
  • Redundant cooling

The POWER 285 workstation supports a full range of graphic input/output devices including the USB SpaceBall Plus 3D, USB SpaceMouse Plus and USB SpacePilot input devices, the T120 20.1-inch TFT flat panel monitor, and other keyboard and mouse devices.

Summary of standard features:

  • 1-core or 2-core SMP design (one processor card)
    • 1-core or 2-core 1.9 GHz with 36 MB L3 cache
    • 1-core or 2-core 2.1 GHz with 36 MB L3 cache
  • 1 GB of DDR-2 533 MHz ECC memory:
    • Expandable to 32 GB
  • Four hot-swap disk drive bays
  • Three media bays:
    • One DVD-ROM (optional)
    • One DVD-RAM (optional)
    • One tape drive (optional)
  • Six hot-swap PCI-X slots:
    • Three 133 MHz 64-bit PCI-X slots
    • One 266 MHz 64-bit PCI-X slot
    • Two 66 MHz 32-bit PCI-X slots
  • One 4-pack disk drive enclosure
  • One media backplane
  • Integrated:
    • IDE controller for connection to internal optical devices
    • Dual 10/100/1000 Gb Ethernet
    • Ultra320 SCSI controller with dual ports (internal) and optional RAID adapter
    • Service processor
    • Hot-swap and redundant fans
    • Two USB ports
    • Two system ports
    • Two HMC ports
  • One Power Supply, 700 Watt ac

The minimum POWER 285 configuration must include a processor, a processor entitlement, memory, power supply, hard disk, a disk drive enclosure, a media backplane, a power cord, a 2D graphics accelerator, and a language group specify.

The defaults, if no choice is made, are:

      1-core, 1.9 GHz processor,
      36 MB L3 cache                    (#8327)
      One Processor Entitlement         (#7319)
      Memory 1 GB memory DIMM           (#1930)
      Power supply, 700 Watt AC         (#5170)
      Disk drive 73.4 GB hard drive     (#1968)
      4-pack disk drive enclosure       (#6574)
      Media backplane                   (#7877)
      2D graphics accelerator           (#1980)
      Language group specify            (#9300 or 97xx)
      Power Cord                        (#6470 to #6478,
                                         #6487, #6488,
                                         #6493 to #6496,
                                         #6651, #6659,
                                         #6670, #6680,
                                         #6687)
 

IBM IntelliStation POWER 285 Express product offerings

Express Product Offerings are available only as initial order.

If you order an IntelliStation POWER 285 workstation with a 1-core (#8327) or 2-core (#8330) POWER5+ 1.9 GHz processor or a 1-core (#5326) or 2-core (#5327) POWER5+ 2.1 GHz processor with a minimum configuration, you qualify for an Express Product Offering giving you a processor entitlement at no extra charge. The number of processors, total memory, quantity/size of disk, presence of a media device, monitor, keyboard, mouse, and audio adapter are the only features that determine if a customer is entitled to a processor entitlement at no additional charge. You will be entitled to a lower priced AIX operating system license or may choose to purchase the system with no operating system. The lower priced AIX operating system is processed via a feature number on AIX.

You can make changes to the standard features as needed and still qualify for processor entitlements at no additional charge, and the lower priced AIX operating system license. However, selection of total memory or DASD smaller than the total defined as the minimums disqualifies the order as an Express Product Offering.

  • Express Offering 190W for 1-core processor:

    (No Longer Available as of February 12, 2007)

    • 1 x 1-core 1.9 GHz processor card (#8327)
    • 2 x 1024 MB (2 x 512 MB) DIMMs (#1930)
    • 1 x 73.4 GB 10,000 rpm disk drive (#1968)
    • 1 x Power supply, 700 watt (#5170)
    • 1 x DVD-ROM (#1994)
    • 1 x Media backplane (#7877)
    • 1 x 4-pack disk drive enclosure (#6574)
    • 1 x GXT4500p graphics accelerator (#2842)
    • 1 x T119 Flat Panel Monitor (#3644)
    • 1 x Quiet Touch Keyboard - USB (#88xx)
    • 1 x 3-Button Optical Mouse - USB (#8841)
    • 1 x Language group specify (#9300 or 97xx)
    • 1 x Power cord

    Note: Receive one processor entitlement (#8409) at no additional charge. One processor is entitled.

  • Express Offering 290W for 2-core processor:

    (No Longer Available as of February 12, 2007)

    • 1 x 2-core 1.9 GHz processor card (#8330)
    • 4 x 1024 MB (2 x 512 MB) DIMMs (#1930)
    • 2 x 73.4 GB 10,000 rpm disk drive (#1968)
    • 1 x Power supply, 700 watt (#5170)
    • 1 x DVD-ROM (#1994)
    • 1 x Media backplane (#7877)
    • 1 x 4-pack disk drive enclosure (#6574)
    • 1 x GXT4500p graphics accelerator (#2842)
    • 1 x T119 Flat Panel Monitor (#3644)
    • 1 x Quiet Touch Keyboard - USB (#88xx)
    • 1 x 3-Button Optical Mouse - USB (#8841)
    • 1 x Language group specify (#9300 or 97xx)
    • 1 x Power cord
    • 1 x Processor Entitlement (#7320)

    Note: Receive one processor entitlement (#8410) at no additional charge. Two processors are entitled.

  • Express Offering for 1-core, 2.1 GHz processor:
    • 1 x 1-core 2.1 GHz processor card (#5326)
    • 2 x 1024 MB (2 x 512 MB) DIMMs (#1930)
    • 1 x 73.4 GB 15,000 rpm disk drive (#1971)
    • 1 x Power supply, 700 watt (#5170)
    • 1 x DVD-ROM (#1994)
    • 1 x Media backplane (#7877)
    • 1 x 4-pack disk drive enclosure (#6574)
    • 1 x GXT4500p graphics accelerator (#2842)
    • 1 x T119 Flat Panel Monitor (#3644)
    • 1 x Quiet Touch Keyboard - USB (#88xx)
    • 1 x 3-Button Optical Mouse - USB (#8841)
    • 1 x Language group specify (#9300 or 97xx)
    • 1 x Power cord

    Note: Receive one processor entitlement (#8402) at no additional charge. One processor is entitled.

  • Express Offering 2-core 2.1 GHz processor:
    • 1 x 2-core 2.1 GHz processor card (#5327)
    • 4 x 1024 MB (2 x 512 MB) DIMMs (#1930)
    • 2 x 73.4 GB 15,000 rpm disk drive (#1971)
    • 1 x Power supply, 700 watt (#5170)
    • 1 x DVD-ROM (#1994)
    • 1 x Media backplane (#7877)
    • 1 x 4-pack disk drive enclosure (#6574)
    • 1 x GXT4500p graphics accelerator (#2842)
    • 1 x T119 Flat Panel Monitor (#3644)
    • 1 x Quiet Touch Keyboard - USB (#88xx)
    • 1 x 3-Button Optical Mouse - USB (#8841)
    • 1 x Language group specify (#9300 or 97xx)
    • 1 x Power cord
    • 1 x Processor Entitlement (#7339)

    Note: Receive one processor entitlement (#8403) at no additional charge. Two processors are entitled.

Reliability, Availability, and Serviceability (RAS)

Reliability, fault tolerance, and data integrity

The reliability of the IntelliStation POWER 285 system starts with components, devices, and subsystems that are designed to be fault tolerant. During the design and development process, subsystems go through rigorous verification and integration testing processes. During system manufacturing, systems go through a thorough testing process to help ensure the highest product quality level.

The IntelliStation POWER 285 system L3 cache and system memory offers error checking and correcting (ECC) fault-tolerant features. ECC is designed to correct environmentally induced, single-bit, intermittent memory failures and single-bit hard failures. With ECC, the likelihood of memory failures will be substantially reduced. ECC also provides double-bit memory error detection that helps protect data integrity in the event of a double-bit memory failure. System memory also provides 4-bit packet error detection that helps to protect data integrity in the event of a DRAM chip failure. The system bus, I/O bus, and PCI buses are designed with parity error detection.

Disk mirroring and disk controller duplexing capability are also provided by the AIX operating system.

The Journaled File System maintains file system consistency and reduces the likelihood of data loss when the system is abnormally halted due to a power failure.

PCI extended error handling (EEH)

In the past, PCI bus parity errors caused a global machine check interrupt, which eventually required a system reboot to continue. In the POWER5+ systems, new I/O drawer hardware, system firmware, and AIX interaction have been designed to allow transparent recovery of intermittent PCI bus parity errors and graceful transition to the I/O device available state in the case of a permanent parity error in the PCI bus. This mechanism is called the PCI extended error handling (EEH). EEH-enabled adapters respond to a special data packet generated from the affected PCI slot hardware by calling system firmware, which will examine the affected bus, allow the device driver to reset it, and continue without a system reboot.

Memory error correction extensions

The standard memory has single-error-correct and double-error detect ECC circuitry designed to correct single-bit memory failures. The double-bit detection helps to maintain data integrity by detecting and reporting multiple errors beyond what the ECC circuitry can correct. The memory chips are organized such that the failure of any specific memory module only affects a single bit within an ECC word (bit scattering), allowing error correction and continued operation in the presence of a complete chip failure (Chipkill recovery).

The memory also utilizes memory scrubbing and thresholding to determine when spare memory modules within each bank of memory, if available, should be used to replace ones that have exceeded their threshold value (dynamic bit steering).

Redundancy for array self-healing

Although the most likely failure event in a processor is a soft single-bit error in one of its caches, there are other events that can occur, and they need to be distinguished from one another. For the L1, L2 and L3 caches and their directories, hardware and firmware keep track of whether permanent errors are being corrected beyond a threshold. If exceeded, a deferred repair error log is created. Additional run-time availability actions, such as CPU vary off or L3 cache line delete, are also initiated.

L1 and L2 caches and L2 and L3 directories on the POWER5+ chip are manufactured with spare bits in their arrays that can be accessed via programmable steering logic to replace faulty bits in the respective arrays. This is analogous to the redundant bit steering employed in main storage as a mechanism that is designed to help avoid physical repair, and is also implemented in POWER5+ systems. The steering logic is activated during processor initialization and is initiated by the built- in self-test (BIST) at power-on time.

L3 cache redundancy is implemented at the cache line granularity level. Exceeding correctable error thresholds while running causes invocation of a dynamic L3 cache line delete function.

Service Processor

The service processor that is standard on the POWER 285 workstation provides the capability to diagnose, check the status of, and sense the operational conditions of a remote system.

The service processor runs on its own power boundary and does not require a system processor to be operational to perform its tasks.

The service processor supports surveillance of the connection to the HMC and to the system firmware (hypervisor). It also provides several remote power control options, environmental monitoring, reset and boot features, and remote maintenance and diagnostic functions including console mirroring.

The service processor can place calls to report surveillance failures, critical environmental faults, and critical processing faults when the system is not managed by an HMC running Service Focal Point.

Fault monitoring functions

  • BIST (built-in self-test) and POST (power-on self-test) check processor, L3 cache, memory, and associated hardware required for proper booting of the operating system, every time the system is powered on. If a non-critical error is detected or if the errors occur in the resources that can be removed from the system configuration, the booting process proceeds to completion. The errors are logged in the system nonvolatile RAM (NVRAM).
  • Disk drive fault tracking can alert the system administrator of an impending disk failure before it impacts customer operation.
  • The AIX log (where hardware and software failures are recorded and analyzed by Error Log Analysis (ELA) routine) warns the system administrator about the causes of system problems. The Service Processor event log also logs unrecoverable checkstop conditions and forwards them to the Service Focal Point if the system is HMC attached. This also enables IBM service representatives to bring along probable replacement hardware components when a service call is placed, thus minimizing system repair time.

Mutual surveillance

The Service Processor monitors the operation of the firmware during the boot process, and also monitors the Hypervisor for termination. The Hypervisor monitors the Service Processor and will perform a reset/reload if it detects the loss of the service processor. If the reset/reload doesn't correct the problem with the service processor, the hypervisor will notify the operating system and the operating system can take appropriate action, including calling for service.

Environmental monitoring functions

  • Temperature monitoring increases the fan speed rotation when ambient temperature is above the normal operating range.
  • Temperature monitoring warns the system administrator of potential environmental related-problems (for example, air conditioning and air circulation around the system) so that appropriate corrective actions can be taken before a critical failure threshold is reached. It also performs an orderly system shutdown when the operating temperature exceeds the critical level.
  • Fan speed monitoring provides a warning and an orderly system shutdown when the speed is out of operational specification.
  • Voltage monitoring provides warning and an orderly system shutdown when the voltages are out of operational specification.

Error handling and reporting

In the unlikely event of system hardware or environmentally induced failure, the system run-time error capture capability systematically analyzes the hardware error signature to determine the cause of failure. The analysis result will be stored in system NVRAM. When the system can be successfully rebooted either manually or automatically, the error will be reported to the AIX operating system. Error Log Analysis (ELA) can be used to display the failure cause and the physical location of failing hardware.

With the integrated Service Processor, the system has the ability to automatically send out an alert via phone line to a pager or call for service in the event of critical system failure. A hardware fault will also turn on the two Attention Indicators (one located on the front of the system unit and the other on the rear of the system unit) to alert the user of an internal hardware problem. The indicator may also be turned on by the operator as a tool to allow system identification. For identification, the indicators will flash, whereas the indicator will be on solid when an error condition occurs.

Availability enhancement functions

  • The auto-restart (reboot) option, when enabled, can reboot the system automatically following an unrecoverable software error, software hang, hardware failure, or environmentally induced (ac power) failure.

Serviceability

The POWER 285 workstation is designed for customer setup of the machine and for subsequent addition of most features (adapters/devices). For a fee, IBM Service can perform the installation.

  • The POWER 285 workstation allows customers to replace service parts (Customer Replaceable Unit) if they desire. To accomplish this, the POWER 285 workstation has incorporated LEDs that will indicate the parts that need to be replaced.
  • The POWER 285 workstation allows support personnel to remotely log into a system to review error logs and perform remote maintenance. The POWER 285 workstation Service Processor enables the analysis of a system that will not boot.
  • The diagnostics consist of Stand-alone Diagnostics, which are loaded from the DVD-ROM drive, and Online Diagnostics.
  • Online Diagnostics, when installed, are resident with the AIX operating system on the disk or system. They can be booted in single- user mode (service mode), run in maintenance mode, or run concurrently (concurrent mode) with other applications. They have access to the AIX Error Log and the AIX Configuration Data.
    • Service mode allows checking of system devices and features.
    • Concurrent mode allows the normal system functions to continue while selected resources are being checked.
    • Maintenance mode allows checking of most system resources.
  • For results of Service Processor tests, access the error log from the Service Processor menu.

Service Agent

The Service Agent is available at no additional charge. When installed on an IBM eServer system, the Service Agent can enhance IBM's ability to provide the system with maintenance service.

The Service Agent:

  • Monitors and analyzes system errors, and if needed, can automatically place a service call to IBM without customer intervention
  • Can help reduce the effect of business disruptions due to unplanned system outages and failures
  • Performs problem analysis on a subset of hardware-related problems and, with customer authorization, can report automatically the results to IBM Service

Back to topBack to top
 
Models

Model summary matrix

Model Processor Clock rate System Memory Internal Storage Slots/Bays
285 POWER5+ 1.9 or 2.1 GHz 1GB to 32GB 36.4GB to 1200GB 6 slots/7 bays

Customer setup (CSU)

Yes.

Devices supported

The following external machine types are supported on the indicated models for MT 9111.

This list is not all inclusive. Many devices are supported through standard ports. Please refer to the sales manual of the external machine type and the list of supported devices in the appropriate section of the AIX sales manual for further attach support information.

          2   X = SUPPORTED DEVICE
          8 
          5 
            
  MT-MOD            DESCRIPTION
--------- - ---------------------------------------------------------
--------- - --------Communications-----------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7036-P16  X  16-port EIA-232 LAN Attached Remote Asynchronous Node (RAN)
            
--------- - --------Disk---------------------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1722-60U  X  TotalStorage DS4300 Midrange Disk System Model 60U
1722-6LU  X  IBM TotalStorage DS4000 Midrange Disk Systems Model 6LU
1724-100  X  IBM 1724 TotalStorage DS4100 Midrange Disk System Model
             100
1740-1RU  X  TotalStorage DS4000 EXP700 Expansion Unit Model 1RU
1742-1RU  X  IBM TotalStorage FAStT700 Storage Server Model 1RU
1742-90U  X  IBM TotalStorage FAStT900 Storage Server Model 90U
2104-DS4  X  Expandable Storage Plus Model DS4
2104-DU3  X  Expandable Storage Plus Model DU3
2104-TS4  X  Expandable Storage Plus Model TS4
2104-TU3  X  Expandable Storage Plus Model TU3
2105-800  X  IBM TotalStorage Enterprise Storage Server Model 800
2105-F10  X  IBM Enterprise Storage Server Model F10
2105-F20  X  IBM Enterprise Storage Server Model F20
3542-1RU  X  IBM TotalStorage 3542 FAStT200 Storage Server Model 1RU
3542-2RU  X  IBM FAST T200 Storage Server Model  2RU
3542-2RX  X  IBM FAStT200 Storage Server Model 2RU (EMEA)
3552-1RU  X  IBM Total Storage FAST T500 Storage Server Model 1RU
3552-1RX  X  IBM TotalStorage FAStT500 Storage Server (EMEA)
3560-1RU  X  IBM TotalStorage 3560 FAStT EXP500 Storage Expansion
             Unit Model 1RU
3560-1RX  X  IBM TotalStorage FAStT EXP500 Storage Expansion Unit
             (EMEA)
7133-D40  X  IBM Serial Disk System Advanced Model D40
7133-T40  X  IBM Serial Disk System Advanced Model T40
7204-419  X  IBM 18.2 GB External Disk Drive Model 419
7204-518  X  IBM 7204 18 GB External Disk Drive Model 518
7204-536  X  IBM 7204 36 GB External Disk Drive Model 536
7204-573  X  IBM 7204 External Disk Drive Model 573
            
--------- - --------Displays-----------------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7310-C03  X  IBM 7310 Model C03 Desktop Hardware Management Console
7310-C04  X  IBM 7310 Model C04 Desktop Hardware Management Console
7310-CR2  X  IBM 7310 Model CR2 Rack-Mount Hardware Management
             Console
7310-CR3  X  IBM 7310 Model CR3 Rack-Mount Hardware Management
             Console
7315-C01  X  IBM 7315 Model C01 Hardware Management Console
7315-C02  X  IBM 7315 Model C02 Hardware Management Console
7315-C03  X  IBM 7315 Model C03 Hardware Management Console
7315-C04  X  IBM 7315 Model C04 Hardware Management Console
7315-CR2  X  IBM 7315 Model CR2 Rack-Mount Hardware Management
             Console
7315-CR3  X  IBM 7315 Model CR3 Rack-Mount Hardware Management
             Console
7316-TF2  X  IBM 7316-TF2 Flat  Panel  Display - 15in Rack Mounted
7316-TF3  X  IBM 7316-TF3 Flat  Panel  Display - 17in Rack Mounted
9419-HB7  X  IBM ThinkVision L191p 19-inch LCD Flat-panel Monitor
9513-AW1  X  IBM T55A 15.0-inch Color TFT LCD Monitor
9516-B03  X  IBM MultiMode 16.1-inch TFT LCD Flat Panel Monitor Model
             B03
9516-B04  X  IBM MultiMode 16.1-inch TFT LCD Flat Panel Monitor Model
             B04
            
--------- - --------Expansion Cabinets-------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2032-C36  X  McDATA 'Core to Edge' Fibre Channel Products Model C36 -
             FC 512 Cabnet
2032-C40  X  McDATA 'Core to Edge' Fibre Channel Products Model C40 -
             FC 512 Cabinet
2109-C36  X  IBM TotalStorage San Cabinet C36
7014-S11  X  .6 Meter System Rack Model S11 - 11U
7014-S25  X  1.3 Meter System Rack -- 25U
7014-T00  X  1.8 Meter System Rack - 36U
7014-T42  X  2.0 Meter System Rack - 42U
7031-D24  X  Ultra 320 SCSI Expandable Disk Storage Enclosures
7031-T24  X  Ultra 320 SCSI Expandable Disk Storage Enclosures
            
--------- - --------Graphics Related---------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6093-011  X  CursorPad Tablet
6093-012  X  Large Tablet
6093-021  X  IBM Tablet Model 021
6094-010  X  Dials
6094-020  X  LPF Keyboard
6094-030  X  Spaceball
6094-031  X  Spaceball
6094-040  X  Spaceball
6094-051  X  Spaceball
6094-600  X  Magellan Enhanced Input Device
 
----------+-+------------OPTICAL-------------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3996-032  X  IBM System Storage Model 032
3996-080  X  IBM System Storage Model 080
3996-174  X  IBM System Storage Model 174
 
--------- - --------SCSI Devices-------------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7210-020  X  IBM CR-ROM Model 020
7210-025  X  4.7GB DVDRAM Drive
7210-030  X  IBM 7210-030  External DVD-RAM Drive
            
--------- - --------Services-----------------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0463-001  X  Software Customization (CCS)
0463-002  X  Center for Customized Solutions (CCS)
            
--------- - --------Storage Network Devices--------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1710-10U  X  IBM 1710 EXP100 Expansion Unit
2105-750  X  IBM TotalStorage Expandable Storage Server Model 750
2145-4F2  X  IBM TotalStorage SAN Volume Controller Storage Engine
             Model 4F2
2146-V1A  X  IBM TotalStorage 2146 SAN Integration Server
            
--------- - --------Switch-------------------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2005-B32  X  IBM 2005 TotalStorage SAN32B-2 Fabric Switch
2005-H08  X  IBM TotalStorage SAN Switch 2005 Model H08
2005-H16  X  IBM TotalStorage SAN Switch 2005 Model H16
2026-224  X  IBM 2026 TotalStorage SAN24M Mid-range Switch Model 224
2026-E12  X  IBM 2026 TotalStorage SAN12M-1 Entry Switch Model E12
2027-140  X  IBM 2027 TotalStorage SAN140M Director Model 140
2027-232  X  IBM 2027 TotalStorage SAN32M-1 Switch Model 232
2027-256  X  IBM TotalStorage SAN256M
2027-R16  X  IBM TotalStorage SAN16M-R
2031-016  X  McDATA Model 016 Departmental ES-3032 Fabric Switch
2031-032  X  McDATA Model 032 Departmental ES-3032 Fabric Switch
2031-216  X  McDATA ES-3216 Fabric Switch
2031-224  X  McDATA IBM 2031 Model 224 Fabric Switch
2031-232  X  McDATA ES-3232  Model 232 Fabric Switch
2031-L00  X  McDATA Model L00 ES-1000 Loop Switch
2032-001  X  McDATA ED-5000 Model 001 Enterprise Fibre Channel Switch
2032-064  X  McDATA Model 064 Enterprise Fibre Channel Director
2032-140  X  2032 McDATA Intrepid 6140 Enterprise Fibre Channel
             Director Model 140
2042-001  X  INRANGE Model 001 FC/9000 64-port Fibre Channel Director
2042-128  X  INRANGE Model 128 FC/9000 128-port Fibre Channel
             Director
2042-256  X  INRANGE Model 256 FC/9000-256 Fibre Channel Director
2045-N16  X  IBM 2045 TotalStorage SAN256N Director Model N16
2061-020  X  Cisco Systems MDS 9120 Fabric Switch, Model 020
2061-040  X  Cisco Systems MDS 9140 Fabric Switch, Model 040
2062-D01  X  Cisco MDS-9216 Multilayer Fabric Switch, Model D01
2062-D04  X  Cisco MDS-9506 Multilayer Fabric Switch,  Model D04
2062-D07  X  Cisco , MDS 9509 Multilayer Director, Model D07
2062-T07  X  Cisco 9509 Multilayer Director Switch (Telecom Model -
             DC Power)
2109-A16  X  IBM TotalStorage SAN16B-R Multiprotocol Router
2109-F16  X  IBM TotalStorage SAN Switch Model F16
2109-F32  X  IBM TotalStorage SAN Switch - 2109 Model F32
2109-M12  X  IBM TotalStorage SAN Switch Model M12
2109-M14  X  IBM TotalStorage SAN Switch 2109 Model M14
2109-S08  X  IBM SAN Fibre Channel Switch Model S08
2109-S16  X  IBM SAN Fibre Channel Switch Model S16
3534-F08  X  IBM TotalStorage Area Network (SAN) Model F08
            
--------- - --------Tape---------------------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3494-B10  X  IBM TotalStorage Virtual Tape Server (VTS) Model B10
3494-B18  X  IBM Magstar Virtual Tape Server  Model B18
3494-B20  X  IBM TotalStorage Virtual Tape Server (VTS) Model B20
3494-D10  X  IBM Magstar Tape Library Model D10
3494-D12  X  IBM Magstar Tape Library Model D12
3494-D14  X  IBM Magstar Tape Library Model D14
3494-D22  X  IBM TotalStorage Enterprise Tape Drive Expansion Frame
             Model D22
3494-D24  X  IBM TotalStorage Enterprise Tape Drive Expansion Frame
             Model D24
3494-HA1  X  IBM Magstar 3494 High Availability Unit Model HA1
3494-L10  X  IBM Magstar Tape Library Model L10
3494-L12  X  IBM Magstar Tape Library Model L12
3494-L14  X  IBM Magstar Tape Library Model L14
3494-L22  X  IBM TotalStorage Enterprise Tape Library Base Frame
             Model L22
3577-L5U  X  IBM System Storage TS3400 Tape Library
3580-H11  X  Linear Tape Open (LTO) Bridge Box (HVD)
3580-H13  X  Linear Tape Open (LTO) Ultrium Tape Drive Model H13
3580-H23  X  IBM TotalStorage Ultrium 2 Tape Drive Model H23
3580-L11  X  Linear Tape Open (LTO) Bridge Box (LVD)
3580-L13  X  Linear Tape Open (LTO) Ultrium Tape Drive Model L13
3580-L23  X  IBM TotalStorage Ultrium 2 Tape Drive Model L23
3581-F28  X  IBM TotalStorage Ultrium Tape 2U Autoloader 3581 Model
             F28
3581-H13  X  IBM Linear Tape Open Ultrium Tape Autoloader  3581 Model
             H13
3581-H17  X  IBM Linear Tape Open (LTO) Ultrium Tape Autoloader Model
             H17
3581-H23  X  IBM TotalStorage Ultrium Tape Autoloader Model H23
3581-L13  X  IBM Linear Tape Open (LTO) Ultrium Tape Autoloader Model
             L13
3581-L17  X  IBM Linear Tape Open (LTO) Ultrium Tape Autoloader Model
             L17
3581-L23  X  IBM TotalStorage Ultrium Tape Autoloader Model L23
3581-L28  X  IBM TotalStorage Ultrium Tape U2 Autoloader Model L28
3582-L23  X  IBM TotalStorage ULTRIUM TAPE LIBRARY 3582 MODEL L23
3583-L18  X  Linear Tape Open (LTO) Tape Library - Scalable
3583-L36  X  Linear Tape Open (LTO) Tape Library - Scalable
3583-L72  X  Linear Tape Open (LTO) Tape Library - Scalable
3584-D32  X  IBM UltraScalable Tape Library Model D32 - Base Frame
3584-L22  X  IBM UltraScalable Tape Library Model L22 - Base Frame
3584-L32  X  IBM UltraScalable Tape Library Model L32 - Expansion
             Frame
3584-L52  X  IBM UltraScalable Tape Library Model L52 - Base Frame
3590-B11  X  IBM Magstar Tape Subsystem Model B11
3590-B1A  X  IBM Magstar Tape Subsystem Model B1A
3590-E11  X  IBM Magstar Tape Subsystem Model E11
3590-E1A  X  IBM Magstar Tape Subsystem Model E1A
3590-H11  X  IBM TotalStorage Enterprise Tape Drive Model H11
3590-H1A  X  IBM TotalStorage Enterprise Tape Drive Model H1A
3592-E05  X  IBM System Storage TS1120 Tape Drive
3592-J1A  X  IBM TotalStorage Enterprise Tape Drive Model J1A
7205-440  X  IBM 7205 40 GB External Digital Linear Tape Drive Model
             440
7205-550  X  IBM 160 GB External Digital Linear Tape Drive Model 550
7206-220  X  IBM 20GB External 4MM DDS-4 Tape Drive Model 220
7206-336  X  IBM 7206 MODEL 336 EXTERNAL 36 GB 4MM DDS GEN5 TAPE DRIVE
7206-VX2  X  IBM External Tape Drive Model VX2 - 4mm
7206-VX3  X  IBM 7206-VX3 External Tape Drive
7207-122  X  IBM 4GB External SLR5 QIC Tape Drive Model 122
7207-330  X  IBM 7207 30 GB External SLR60 Tape Drive Model 330
7208-345  X  IBM 7208 Model 345 60GB External 8MM Tape Drive
7212-102  X  1U Dual-bay Storage Device Enclosure (Tape or DVD)
7212-103  X  IBM 7212-103 Storage Tape & DVD Enclosure Exp Model
7212-312  X  IBM 7212 MODEL 312 1U AUTOLOADER TAPE DRIVE
7332-220  X  IBM 4MM DDS-4 Tape Cartridge Autoloader Model 220
 

Model conversions

None.
Back to topBack to top
 

Technical description
TOC Link Physical specifications TOC Link Operating environment TOC Link Limitations
TOC Link Hardware requirements TOC Link Software requirements


Physical specifications

Deskside/Desktop

  • Width: 240 mm (09.5 in)
  • Depth: 695 mm (27.4 in)
  • Height: 535 mm (21.1 in)
  • Weight:
    • Minimum configuration: 35.5 Kg (78.1 lb)
    • Maximum configuration: 43.0 Kg (94.6 lb)

Operating environment

  • Temperature: (Nonoperating) 5 to 45C (41 to 113 F) Recommended temperature (Operating) 5 to 35C (41 to 95 F)
  • Relative humidity: 8% to 80%
  • Maximum wet bulb: (Power Off) 27C (80 F)
  • Operating voltage: 1-way or 2-way: 100 to 127 or 200 to 240 V ac (auto-ranging)
  • Operating frequency: 47/63 Hz
  • Power consumption: 600 watts (maximum)
  • Thermal output: 2,046 Btu/hour (maximum)
  • Power source loading: 0.632 kVA (maximum configuration)
  • Maximum altitude: 3,048 m (10,000 ft)

Noise level and sound power

  • 5.0 Bels Idle/5.1 Bels operating

EMC Conformance Classification

This equipment is subject to FCC rules and shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution.

  • U.S.A.: FCC Class B
  • Europe: CISPR 22 Class B
  • Japan: VCCI-B
  • Korea: Korean Requirement Class B
  • China: People's Republic of China commodity inspection law

Product safety/country testing/certification

  • UL 1950 Underwriters Laboratory, Safety Information
  • CSA C22.2 No. 950-M86
  • EN60950 European Norm
  • IEC 950, Edition 1, International Electrotechnical Commission, Safety Information
  • Nordic deviations to IEC-950 1st Edition, as outlined in document EMKO-TSE(05-SEC) 200/93

General Requirements

The product is in compliance with IBM Corporate Bulletin C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard (Suppliers Declaration).

Homologation -- Telecom Environmental Testing (Safety and EMC)

Homologation approval for specific countries has been initiated with the IBM Homologation and Type Approval (HT&A) organization in LaGaude. This IntelliStation model and applicable features meet the environmental testing requirements of the country TELECOM and have been designed and tested in compliance with the Full Quality Assurance Approval(FQAA) process as delivered by the British Approval Board for Telecom (BABT), the U.K. Telecom regulatory authority.

Limitations

System

  • External SCSI Port Enablement Cable:
    • Cannot use slot 5 when #4275 is installed in the system
    • Maximum external cable length supported by #4275 is 6 meters
  • The system ports are similar to serial ports, however they are disabled when either HMC port is connected to a Hardware Management Console. Either the HMC ports or the system ports can be used, but not both.

    Even when no HMC is attached, integrated system ports will work properly only with modems, async terminals, and certain UPSs for which the manufacturer provides a special cable. Attachment of any other serial devices (including system-to-system connections for HACMP) requires a serial port adapter in a PCI slot.

  • In a Class B EMI environment, the SpacePilot (#8426), SpaceBall (#8422/#8424), and SpaceMouse (#8423/#8425) input devices cannot be attached to a keyboard USB port. These devices must be attached to a system USB port.
  • The maximum external cable length supported by #4270 is 6 meters.

Processor Cards

  • Only one processor card may be installed in the system. Processor cards are soldered to the planar.
  • 1-core 1.9 GHz processor (#8327) requires that one processor entitlement (1 x #7319 or 1 x #8409) be ordered.
  • 1-core 2.1 GHz processor (#5326) requires that one processor entitlement (1 x #7336 or 1 x #8402) be ordered.
  • 2-core 1.9 GHz processor (#8330) requires that at two processor entitlements (#7320 or #8410) be ordered. A maximum of two processor entitlement features (2 x #7320, or 1 x #7320 and 1 x #8410) are allowed per processor card.
  • 2-core 2.1 GHz processor (#5327) requires that at two processor entitlements (#7339 or #8403) be ordered. A maximum of two processor entitlement features (2 x #7339, or 1 x #7339 and 1 x #8403) are allowed per processor card.

Redundant power supply/Fans

  • Redundant power supplies are not available on the POWER 285 workstation
  • Redundant fans are standard

System memory

  • A minimum of 1 GB of memory is required.
    • A maximum of 32 GB of system memory is available.

Memory Features

    Feature              number      quantity   quantity
    =======              ======      ========   ========
    1024 MB DDR-2         1930          0          4
      (2 x 512 MB DIMMs)
 
    2048 MB DDR-2         1931          0          4
      (2 x 1024 MB DIMMs)
 
    4096 MB DDR-2         1932          0          4
      (2 x 2048 MB DIMMs)
 
    8192 MB DDR-2         1934          0          4
      (2 x 4096 MB DIMMs)
 

PCI Card Slots

The IntelliStation POWER 285 workstation has a maximum of six hot-plug PCI-X slots:

  • Slots 1, 5, and 6 are 64-bit and run at 133 MHz.
  • Slot 4 is Double Data Rate (DDR), 64-bit and runs at 266 MHz.
  • Slots 2 and 3 are 32-bit and run at 66 MHz.
  • Slots 4, 5, and 6 are long; slots 1, 2, and 3 can accommodate short cards only.

Graphics Adapters

  • A 2D graphics adapter is required in the minimum configuration.
  • The maximum number of graphics adapters supported in the POWER 285 workstation is four.
  • Graphics adapters are not hot-swap capable.
  • 3D graphics adapters (#2842 and #2843) do not support the T115 display (#3641).

I/O Adapters

  • Feature number 1907 is not plugged into a slot.
  • Feature numbers 1981, 1982, 5718, and 5719 require that a minimum 2-way processor be installed in the system.
  • Maximum of one of feature number 1981, 1982, 5718, and 5719 is allowed in the system.
  • Refer to Figure 2 for additional I/O adapter limitations.
     Figure 2. I/O Adapter Features
 
 
                                     Orderable Supported
                                     Feature   Feature   Max
   I/O Adapter                       number    Number    qty   Size
   ===========                       ========= ========= ===   =====
   Dual Channel Ultra320             1974                 5    Short
   Dual Channel Ultra320 SCSI RAID   1975                 3    Long
   Dual Channel Ultra320 SCSI RAID             5703       3    Long
   Dual Channel SCSI RAID Enablement           1976       1    N/A
   2 Gb Fibre Channel PCI-X          1977      5716       4    Short
   Gigabit Ethernet                  1978      5700       5    Short
   10/100/1000 Ethernet              1979      5701       5    Short
   GXT135P Graphics Accelerator      1980      2849       4    Short
   10 Gigabit Ethernet - SR          1981      5718       1    Short
   10 Gigabit Ethernet - LR          1982      5719       1    Short
   2-port 10/100/1000 Ether.         1983      5706       5    Short
   2-port Gigabit Ethernet-SX        1984      5707       5    Short
   10/100 Mbps Ethernet                        1985       5    Short
   SCSI RAID Enablement Card         1907      5727       1    N/A
   PCI-X Ultra320 SCSI DDR           1912      5736       5    Short
   2-port USB PCI                    2738                 3    Short
   POWER GXT4500P Graphics           2842                 2    Long
   POWER GXT6500P Graphics           2843                 1    Long
   8-Port Asynchronous EIA-232       2943                 2    Short
   128-Port Asynchronous Controller            2944       2    Short
   Artic960 Hx 4-ports               2947                 3    Long
   2-Port Multiprotocol                        2962       4    Short
   Token-Ring PCI                              4959       4    Short
   10/100 Mbps Ethernet                        4962       5    Short
   Dual Channel SCSI RAID Enablement           5709       1    N/A
   Dual Channel Ultra320                       5712       5    Short
   2-port Asynchronous EIA-232       5723                 2    Short
   Universal Differential Ultra SCSI           6204       2    Short
   2 Gigabit Fibre Channel                     6239       5    Short
   Audio PCI Adapter                 8244                 1    Short
   PCI-X DDR Dual Channel Ultra320   1913      5737       3    Long
    RAID
   4-Port 10/100/1000 Base-TX PCI-X  1954      5740       4    Short
   1 Gigabit iSCSI TOE PCI-X on      1986      5713       3    Short
    Copper
   1 Gigabit iSCSI TOE PCI-X on      1987      5714       3    Short
    Optical
    4 Gb Single-Port Fibre Channel   1905      5758       3    Short
    4 Gb Dual-Port Fibre Channel     1910      5759       3    Short
    10 Gb Ethernet-SR                5721                 1    Short
    10 Gb Ethernet-LR                5722                 1    Short
 

Storage Devices/Bays

  • The POWER 285 workstation has one DASD 4-pack in the system (#6574).
  • Media bays can contain an optional DVD-ROM (#1994 or follow-on) in bays 2 and 3, an optional DVD-RAM (#1993 or follow-on) in bays 2 and 3, and an optional tape drive (#1991, #1992, #1997, or follow-ons) in bay 4.
  • If optional tape drive feature number 1892, 1991, 1992, 1997, 5755, 6120, 6258 or 6279 is installed, cable feature number 4278 is required. Cable feature number 4278 requires 1892, 1991, 1992, 1997, 5755, 6120, 6258 Or 6279 to be installed.
  • The first optical device can only be installed in the top slimline bay (bay D2) in the rack configuration.
     Figure 3. Storage Device Features
                                                    Orderable Supported
                           Maximum                   feature   feature
Device                     quantity     Bay          number    number
======                     =======      =========    =======   =======
DVD-ROM (IDE)                  2        Media 2/3       1994      2640
 
DVD-RAM (IDE)                  2        Media 2/3       1993      5751
 
4-mm 36/72 GB Tape (LVD)       1        Media 4         1991      6258
 
8-mm 60/150 GB Tape (LVD)      1        Media 4         1992      6120
 
200/400 GB Tape (LVD)          1        Media 4         1997      5755
 
VXA-320 160/320GB Internal     1        Media 4         1892      6279
 Tape Drive
 
36.4 GB 15,000 rpm Ultra320
 SCSI Disk, Hot-swap           4        DASD 1-4        1970      3277
 
73.4 GB 10,000 rpm             4        DASD 1-4        1968      3274
 Ultra320 SCSI Disk,
 Hot-swap
 
73.4 GB 15,000 rpm             4        DASD 1-4        1971      3278
 Ultra320 SCSI Disk, Hot-swap
 
146.8 GB 10,000 rpm,           4        DASD 1-4        1969      3275
 Ultra320 SCSI Disk, Hot-swap
 
146.8 GB 15,000 rpm,           4        DASD 1-4        1972      3279
 Ultra320 SCSI Disk, Hot-swap
 
300 GB 10,000 rpm,             4        DASD 1-4        1973      3578
 Ultra320 SCSI Disk, Hot-swap
 
Ultra320 SCSI 4-pack           1        System Planar   6574
 

Cable Orders

No cables required.

Hardware requirements

IBM IntelliStation POWER 285 workstation minimum system configuration

The POWER 285 workstation can be configured to incorporate a 2-core processor, 32 GB of system memory, six PCI adapters, and multiple media devices, as required. This flexibility is made available through the many optional features for the POWER 285 workstation.

Each POWER 285 workstation must include a minimum of the following items:

  • One system Central Electronics Complex (CEC) enclosure with the following items:
    • One power cord (#6470-#6478, #6487,#6488, #6493-#6496, #6651, #6659, #6670, #6680, #6687)
    • One language group, Specify (#9300 or #97xx)
  • One processor card -- chosen from:
    • POWER5+ processor -- 1-core 1.9 GHz, 36 MB L3 Cache (#8327)
    • POWER5+ processor -- 2-core 1.9 GHz, 36 MB L3 Cache (#8330)
    • POWER5+ processor -- 1-core 2.1 GHz, 36 MB L3 Cache (#5326)
    • POWER5+ processor -- 2-core 2.1 GHz, 36 MB L3 Cache (#5327)
  • One or two processor entitlements:
    • 1 x #7319, or 1 x #8409 with processor card #8327
    • 2 x #7320, or 1 x #7320 and 1 x #8410, with processor card #8330
    • 1 x #7336, or 1 x #8402 with processor card #5326
    • 2 x #7339, or 1 x #7339 and 1 x #8403, with processor card #5327

    Note: #8409 and #8410 are part of the Express Product Offerings.

  • Choose 1 GB minimum memory from:
    • 1024 MB DDR-2 Memory (2 x 512 MB DIMMs) (#1930)
    • 2048 MB DDR-2 Memory (2 x 1024 MB DIMMs) (#1931)
    • 4096 MB DDR-2 Memory (2 x 2048 MB DIMMs) (#1932)
    • 8192 MB DDR-2 Memory (2 x 4096 MB DIMMs) (#1934)
  • Choose disk drive from:
    • 36.4 GB Ultra320 15,000 rpm (#1970)
    • 73.4 GB Ultra320 10,000 rpm (#1968)
    • 73.4 GB Ultra320 15,000 rpm (#1971)
    • 146.8 GB Ultra320 10,000 rpm (#1969)
    • 146.8 GB Ultra320 15,000 rpm (#1972)
    • 300 GB Ultra320 10,000 rpm (#1973)
  • Choose graphics accelerator from:
    • POWER GXT135P (#1980)
    • POWER GXT4500P (#2842)
    • POWER GXT6500pP (#2843)
  • One 4-pack disk drive enclosure (#6574)
  • One Power supply, 700 watt ac, Hot-swap (#5170)
  • One Media Backplane Card (#7877)

RAID

Internal RAID is available on the IntelliStation POWER 285 workstation.

A single option is available to customers who want to install hardware-assisted RAID on their systems:

  1. Install feature number 1907, the Dual Channel SCSI RAID Enablement Card. Install four disk drives in feature number 6574, the Ultra320 SCSI 4-pack enclosure. This will allow RAID capabilites within a single 4-pack of DASD.

Display cable feature number matrix

The following chart shows the cable feature to graphics accelerator reference. Check your specific system model to determine which graphics accelerators are supported on which model.

                             Graphics Accelerators
 
                                         GXT2000P/ GXT4000P/  GXT4500P/
          GXT130P   GXT135P    GXT300P   GXT3000P  GXT6000P   GXT6500P
Displays  (5D/DDC)             (15D/DDC) (15D/DDC) (DVI/DDC)  (DVI/DDC)
--------  --------  -------    --------- --------- ---------  ---------
P70        4238      4238       4238      4238      4238(1)    4238(1)
P72(2)    Display   Display    Display   Display   Display(1) Display(1)
P76(2)    Display   Display    Display   Display   Display(1) Display(1)
P77(2)    Display   Display    Display   Display   Display(1) Display(1)
P92(3)    Display   Display    Display   Display   Display(1) Display(1)
P200       4238      4238       4238      4238      4238(1)    4238(1)
P201       4237      4237       4237      4237      4237(1)    4237(1)
P202(3)   Display   Display    Display   Display   Display(1) Display(1)
P260(3)   Display   Display    Display   Display   Display    Display
P275(3)   Display   Display    Display   Display   Display    Display
C220p(3)  Display   Display    Display     NS      Display    Display
9516-B03   4217      4217       4217      4217      4217(1)    4217(1)
9511-Axx  Display   Display      NS        NS        NS        NS
  T54A/T54H/T540
9519-Axx  Display   Display      NS      Display      NS      Display
  T85A
9493-Axx  Display   Display      NS        NS        NS        NS
  T56A
9512-Hxx  Display   Display      NS        NS        NS        NS
  T541H
6636-Hxx  Display   Display      NS        NS        NS        NS
  L150p
9494-xxx    NS      Display      NS        NS        NS       Display
  T860
9497-Axx  Display   Display    Display   Display     NS       Display(1)
  T86A
6656-Hxx    NS      Display      NS        NS        NS        NS
  T560
6658-Hxx  Display   Display      NS      Display     NS       Display
  T84H
6659-Hxx    NS      Display      NS        NS        NS       Display
  T210
6736-Hxx    NS      Display      NS        NS        NS       Display
  L200p
6736-Hxx    NS      Display      NS        NS        NS       Display
  L170p
9417-HBx    NS      Display      NS        NS        NS       Display
  L171p
9417-HB7    NS      Display      NS        NS        NS       Display
  L191p
4942-15U/X  NS      Display      NS        NS        NS       NS
  T115
4943-17U/X  NS      Display      NS        NS        NS       Display
  T117
4944-19U/X  NS      Display      NS        NS        NS       Display
  T119
4945-20U/X  NS      Display      NS        NS        NS       Display
  T120
 

Note: NS = Not Supported - This display/adapter combination is not supported. Display - The appropriate cable is included with the display."

Note: (1) Must use DVI to 15-pin D-shell converter supplied with the GXT4000P, GXT4500P, GXT6000P or GXT6500P.

Note: (2) Captured 15-pin D-shell cable".

Note: (3) Dual input on monitor.

Software requirements

  • AIX 5L for POWER V5.2 with the 5200-07 Recommended Maintenance Package (APAR IY67914), or later
  • AIX 5L for POWER V5.3 with the 5300-03 Recommended Maintenance Package (APAR IY71011), or later

Back to topBack to top
 
Publications

The following information is shipped with the IntelliStation POWER 285 workstation.

                                                            Order
Title                                Language               number
-----                                --------               ----------
IBM System Hardware Information
Center CD-ROM                        U.S English             SK3T-8159
                                     Simplified Chinese      S152-0852
                                     Traditional Chinese     SK3T-0199
                                     Croatian                SK3T-0387
                                     Czech                   SK4T-0080
                                     Dutch/Belgian Dutch     SK3T-1375
                                     French/Swiss French/
                                     Belgian French/
                                     Canadian French         SK4T-0079
                                     German/Swiss German     SK3T-2571
                                     Hungarian               SK3T-7337
                                     Ialian/Swiss Italian    SK2T-8431
                                     Japanese                SK88-4002
                                     Korean                  SK24-0018
                                     Polish                  SK3T-5499
                                     Brazilian Portuguese    S517-8002
                                     Portuguese              SK3T-0213
                                     Portuguese MNCS         SK17-0213
                                     Romanian                SK3T-0386
                                     Russian                 SK3T-1610
                                     Slovakian               SK3T-0385
                                     Slovenian               SK3T-0384
                                     Spanish                 SK3T-7776
 
IBM eServer Safety Information                               G229-9054
Setup Instructions                                           SA41-5156
IBM Statement of Limited Warranty                            Z125-4753
IBM License Agreement for Machine Code                       Z125-5468
Pointer Sheet for Machine Internal Code License Agreement    GC52-1065
 

Back to topBack to top
 
Features
TOC Link Features - No charge TOC Link Features - Chargeable TOC Link Feature availability matrix
TOC Link Feature descriptions TOC Link Feature exchanges


Features - No charge

  • Administrative
    • (#0983) - US TAA Compliance Indicator
  • Languages
    • (#9300) - Language Group Specify - US English
    • (#9700) - Language Group Specify - Dutch
    • (#9703) - Language Group Specify - French
    • (#9704) - Language Group Specify - German
    • (#9705) - Language Group Specify - Polish
    • (#9707) - Language Group Specify - Portuguese
    • (#9708) - Language Group Specify - Spanish
    • (#9711) - Language Group Specify - Italian
    • (#9712) - Language Group Specify - Canadian French
    • (#9714) - Language Group Specify - Japanese
    • (#9715) - Language Group Specify - Traditional Chinese (Taiwan)
    • (#9716) - Language Group Specify - Korean
    • (#9718) - Language Group Specify - Turkish
    • (#9719) - Language Group Specify - Hungarian
    • (#9720) - Language Group Specify - Slovakian
    • (#9721) - Language Group Specify - Russian
    • (#9722) - Language Group Specify - Simplified Chinese (PRC)
    • (#9724) - Language Group Specify - Czech
    • (#9725) - Language Group Specify -- Romanian
    • (#9727) - Language Group Specify -- Slovenian
  • Miscellaneous
    • (#0050) - IBM Express Seller Indicator
    • (#5001) - Custom Service Specify
    • (#5005) - Software Preinstall
    • (#7305) - AAP Software Pre-Install Indicator
    • (#8231) -Memory Offering -- 32GB/64GB/96GB/128GB (Multiples of 4 of 2x4GB DIMMs)

Features - Chargeable

Special Features - Initial Orders

  • Miscellaneous
    • (#6574) - Ultra320 SCSI 4-Pack
  • Power
    • (#5170) - Power Supply, 700 Watt AC
  • Processor
    • (#5326) - 1-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache
    • (#5327) - 2-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache
    • (#8327) - 1-core 1.65 GHz POWER5+ Processor Card, 36MB L3 Cache
    • (#8330) - 2-core 1.9 GHz POWER5+ Processor Card, 36MB L3 Cache

Special Features - Plant and/or Field Installable

  • Adapters
    • (#1905) - 4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter
    • (#1907) - Dual Channel SCSI RAID Enablement Daughter Card
    • (#1910) - 4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter
    • (#1912) - PCI-X DDR Dual Channel Ultra320 LVD SCSI Adapter
    • (#1913) - PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter
    • (#1954) - 4-Port 10/100/1000 Base-TX PCI-X Adapter
    • (#1974) - PCI-X Dual Channel Ultra320 SCSI Adapter
    • (#1975) - PCI-X Dual Channel Ultra320 SCSI RAID Adapter
    • (#1976) - Dual Channel SCSI RAID Enablement Card
    • (#1977) - 2 Gigabit Fibre Channel PCI-X Adapter
    • (#1978) - IBM Gigabit Ethernet-SX PCI-X Adapter
    • (#1979) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
    • (#1980) - POWER GXT135P Graphics Accelerator with Digital Support
    • (#1981) - 10 Gigabit Ethernet -SR PCI-X Adapter
    • (#1982) - IBM 10 Gigabit Ethernet-LR PCI-X Adapter
    • (#1983) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
    • (#1984) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
    • (#1985) - 10/100 Mbps Ethernet PCI Adapter II
    • (#1986) - 1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter
    • (#1987) - 1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter
    • (#2738) - 2-Port USB PCI Adapter
    • (#2842) - POWER GXT4500P Graphics Accelerator
    • (#2843) - POWER GXT6500P Graphics Accelerator
    • (#2849) - POWER GXT135P Graphics Accelerator with Digital Support
    • (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
    • (#2944) - 128-Port Asynchronous Controller, PCI bus
    • (#2947) - IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
    • (#2962) - 2-Port Multiprotocol PCI Adapter
    • (#4959) - IBM Token-Ring PCI Adapter
    • (#4962) - 10/100 Mbps Ethernet PCI Adapter II
    • (#5700) - IBM Gigabit Ethernet-SX PCI-X Adapter
    • (#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
    • (#5703) - PCI-X Dual Channel Ultra320 SCSI RAID Adapter
    • (#5706) - IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
    • (#5707) - IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
    • (#5709) - Dual Channel SCSI RAID Enablement Card
    • (#5712) - PCI-X Dual Channel Ultra320 SCSI Adapter
    • (#5713) - 1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter
    • (#5714) - 1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter
    • (#5716) - 2 Gigabit Fibre Channel PCI-X Adapter
    • (#5718) - 10 Gigabit Ethernet -SR PCI-X Adapter
    • (#5719) - IBM 10 Gigabit Ethernet-LR PCI-X Adapter
    • (#5721) - 10 Gb Ethernet-SR PCI-X 2.0 DDR Adapter
    • (#5722) - 10 Gb Ethernet-LR PCI-X 2.0 DDR Adapter
    • (#5723) - 2-Port Asynchronous EIA-232 PCI Adapter
    • (#5727) - Dual Channel SCSI RAID Enablement Card
    • (#5736) - PCI-X DDR 2.0 Dual Channel Ultra320 SCSI Adapter
    • (#5737) - PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter
    • (#5740) - 4-Port 10/100/1000 Base-TX PCI-X Adapter
    • (#5758) - 4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter
    • (#5759) - 4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter
    • (#6204) - PCI Universal Differential Ultra SCSI Adapter
    • (#6239) - 2 Gigabit Fibre Channel PCI-X Adapter
    • (#8244) - Audio PCI Adapter for Workstations
  • Cable
    • (#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable
    • (#2118) - Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
    • (#2424) - 0.6M 16-bit SCSI-2 System to System Cable
    • (#2425) - 2.5M 16-bit SCSI-2 System-to-System Cable
    • (#2456) - LC-SC 50 Micron Fiber Converter Cable
    • (#2459) - LC-SC 62.5 Micron Fiber Converter Cable
    • (#2861) - ARTIC960Hx 4-Port EIA-232 Cable
    • (#2863) - ARTIC960Hx 4-Port X.21 Cable
    • (#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable
    • (#2934) - Asynchronous Terminal/Printer Cable EIA-232
    • (#2936) - Asynchronous Cable EIA-232/V.24
    • (#2951) - Cable, V.24 / EIA-232
    • (#2952) - Cable, V.35
    • (#2953) - Cable, V.36 / EIA-499
    • (#2954) - Cable, X.21
    • (#3124) - Serial to Serial Port Cable for Drawer/Drawer
    • (#3125) - Serial-to-Serial Port Cable for Rack/Rack
    • (#3925) - Serial Port Converter Cable, 9-Pin to 25-Pin
    • (#3926) - Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
    • (#3927) -Serial Port Null Modem Cable, 9-pin to 9-pin, 3.7M
    • (#3928) -Serial Port Null Modem Cable, 9-pin to 9-pin, 10M
    • (#4242) - 6-Foot Extender Cable for Displays (15-pin D-shell to 15-pin D-shell)
    • (#4256) - Extender Cable - USB Keyboards, 2M
    • (#4267) - SCSI Cable, PCI Adapter to Hot-Swap Disks
    • (#4275) - External SCSI Port Enablement Cable
    • (#4278) - SCSI Cables (Power and Logic), PCI Riser to SCSI LVD Media Device; Mounting Tray
    • (#7801) - Ethernet Cable, 6M, Hardware Management Console to System Unit
    • (#7802) - Ethernet Cable, 15M, Hardware Management Console to System Unit
    • (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter
    • (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
    • (#8133) - RJ-45 to DB-25 Converter Cable
    • (#8136) - Rack Mountable Remote Asynchronous Node 16-Port EIA-232
    • (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232
  • Disk
    • (#1968) - 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#1969) - 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#1970) - 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#1971) - 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#1972) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#1973) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#3274) - 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#3275) - 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#3277) - 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#3278) - 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#3279) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#3578) - 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
    • (#3585) - 300 GB 15K RPM SCSI Disk Drive
    • (#6598) - Disk Slot Fillers (Quantity 4)
  • Display
    • (#3628) - IBM P260/P275 Color Monitor, Business Black, and Cable
    • (#3636) - L200P Flat Panel Monitor
    • (#3637) - IBM T541H /L150p 15" TFT Color Monitor
    • (#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable
    • (#3639) - IBM ThinkVision L170p Flat Panel Monitor
    • (#3640) - ThinkVision L171p Flat Panel Monitor
    • (#3641) - IBM T115 Flat Panel Monitor
    • (#3642) - ThinkVision L191p Flat Panel Monitor
    • (#3643) - IBM T120 Flat Panel Monitor
    • (#3644) - IBM T119 Flat Panel Monitor
    • (#3645) - IBM T117 Flat Panel Monitor
  • Keyboards
    • (#5951) - Full Width Quiet Touch Keyboard -- USB, US English, #103P
    • (#5952) - Full Width Quiet Touch Keyboard -- USB, French, #189
    • (#5953) - Full Width Quiet Touch Keyboard -- USB, Italian, #142
    • (#5954) - Full Width Quiet Touch Keyboard -- USB, German/Austrian, #129
    • (#5955) - Full Width Quiet Touch Keyboard -- USB, UK English, #166P
    • (#5956) - Full Width Quiet Touch Keyboard -- USB, Spanish, #172
    • (#5957) - Full Width Quiet Touch Keyboard -- USB, Japanese, #194
    • (#5958) - Full Width Quiet Touch Keyboard -- USB, Brazilian Portuguese, #275
    • (#5959) - Full Width Quiet Touch Keyboard -- USB, Hungarian, #208
    • (#5960) - Full Width Quiet Touch Keyboard -- USB, Korean, #413
    • (#5961) - Full Width Quiet Touch Keyboard -- USB, Chinese, #467
    • (#5962) - Full Width Quiet Touch Keyboard -- USB, French Canadian, #445
    • (#5963) - Full Width Quiet Touch Keyboard -- USB, Canadian French, #058
    • (#5964) - Full Width Quiet Touch Keyboard -- USB, Belgian/French, #120
    • (#5965) - Full Width Quiet Touch Keyboard -- USB, Swedish/Finnish, #153
    • (#5966) - Full Width Quiet Touch Keyboard -- USB, Danish, #159
    • (#5967) - Full Width Quiet Touch Keyboard -- USB, Bulgarian, #442
    • (#5968) - Full Width Quiet Touch Keyboard -- USB, Swiss/French/ German, #150
    • (#5969) - Full Width Quiet Touch Keyboard -- USB, Norwegian,#155
    • (#5970) - Full Width Quiet Touch Keyboard -- USB, Dutch, #143
    • (#5971) - Full Width Quiet Touch Keyboard -- USB, Portuguese, #163
    • (#5972) - Full Width Quiet Touch Keyboard -- USB, Greek, #319
    • (#5973) - Full Width Quiet Touch Keyboard -- USB, Hebrew, #212
    • (#5974) - Full Width Quiet Touch Keyboard -- USB, Polish, #214
    • (#5975) - Full Width Quiet Touch Keyboard -- USB, Slovakian, #245
    • (#5976) - Full Width Quiet Touch Keyboard -- USB, Czech, #243
    • (#5977) - Full Width Quiet Touch Keyboard -- USB, Turkish, #179
    • (#5978) - Full Width Quiet Touch Keyboard -- USB, LA Spanish, #171
    • (#5979) - Full Width Quiet Touch Keyboard -- USB, Arabic, #253
    • (#5980) - Full Width Quiet Touch Keyboard -- USB, Thai, #191
    • (#5981) - Full Width Quiet Touch Keyboard -- USB, Russian, #443
    • (#5982) - Full Width Quiet Touch Keyboard -- USB, Slovenian, #234
    • (#5983) - Full Width Quiet Touch Keyboard -- USB, US English International, #103P
    • (#8800) - Quiet Touch Keyboard - USB, Business Black, US English, #103P
    • (#8801) - Quiet Touch Keyboard - USB, Business Black, French, #189
    • (#8802) - Quiet Touch Keyboard - USB, Business Black, Italian, #142
    • (#8803) - Quiet Touch Keyboard - USB, Business Black, German/Austrian, #129
    • (#8804) - Quiet Touch Keyboard - USB, Business Black, UK English, #166
    • (#8805) - Quiet Touch Keyboard - USB, Business Black, Spanish, #172
    • (#8806) - Quiet Touch Keyboard - USB, Business Black, Japanese, #194
    • (#8807) - Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275
    • (#8808) - Quiet Touch Keyboard - USB, Business Black, Canadian French, #058
    • (#8810) - Quiet Touch Keyboard - USB, Business Black, Belgian/Dutch, #120
    • (#8811) - Quiet Touch Keyboard - USB, Business Black, Swedish/Finnish, #153
    • (#8812) - Quiet Touch Keyboard - USB, Business Black, Danish, #159
    • (#8813) - Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442
    • (#8814) - Quiet Touch Keyboard - USB, Business Black, Swiss/French/German, #150F/G
    • (#8816) - Quiet Touch Keyboard - USB, Business Black, Norwegian, #155
    • (#8817) - Quiet Touch Keyboard - USB, Business Black, Dutch, #143
    • (#8818) - Quiet Touch Keyboard - USB, Business Black, Portuguese, #163
    • (#8819) - Quiet Touch Keyboard - USB, Business Black, Greek, #319
    • (#8820) - Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
    • (#8821) - Quiet Touch Keyboard - USB, Business Black, Hungarian, #208
    • (#8823) - Quiet Touch Keyboard - USB, Business Black, Polish, #214
    • (#8825) - Quiet Touch Keyboard - USB, Business Black, Slovakian, #245
    • (#8826) - Quiet Touch Keyboard - USB, Business Black, Czech, #243
    • (#8827) - Quiet Touch Keyboard - USB, Business Black, Turkish, #179
    • (#8829) - Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171
    • (#8830) - Quiet Touch Keyboard - USB, Business Black, Arabic, #238
    • (#8833) - Quiet Touch Keyboard - USB, Business Black, Korean, #413
    • (#8834) - Quiet Touch Keyboard - USB, Business Black, Chinese/US, #467
    • (#8835) - Quiet Touch Keyboard - USB, Business Black, French Canadian, #445
    • (#8836) - Quiet Touch Keyboard - USB, Business Black, Thai, #191
    • (#8838) - Quiet Touch Keyboard - USB, Business Black, Russian, #443
    • (#8839) - Quiet Touch Keyboard - USB, Business Black, Yugoslavian/Latin, #105
    • (#8840) - Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P
  • Linecords
    • (#6470) - Power Cord (6-foot), To Wall (125V, 15A), Plug Type #4
    • (#6471) - Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #70
    • (#6472) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #18
    • (#6473) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type 19
    • (#6474) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 13A), Plug Type #23
    • (#6475) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #32
    • (#6476) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #24
    • (#6477) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #22
    • (#6478) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #25
    • (#6487) - Power Cord (6-foot), To Wall, (250V, 15A), United States, Plug Type #5
    • (#6488) - Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A or 250V, 10A), Plug Type #2
    • (#6493) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #62
    • (#6494) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #69
    • (#6495) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #73
    • (#6496) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #66
    • (#6651) - Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #75
    • (#6659) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug Type #76
    • (#6670) - Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59 (DENAN marking)
    • (#6680) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #6, Insulated
    • (#6687) - Power Cord (6-foot), To Wall, (250V, 15A), Plug Type #57 (DENAN marking)
  • Media Devices
    • (#1892) - VXA-320 160/320GB Internal Tape Drive
    • (#1991) - 36/72GB 4mm Internal Tape Drive
    • (#1992) - IBM 80/160 GB Internal Tape Drive with VXA Technology
    • (#1993) - IBM 4.7 GB IDE Slimline DVD-RAM Drive
    • (#1994) - IDE Slimline DVD-ROM Drive
    • (#2591) - External USB 1.44 MB Diskette Drive
    • (#2640) - IDE Slimline DVD-ROM Drive
    • (#5751) - IBM 4.7 GB IDE Slimline DVD-RAM Drive
    • (#6120) - IBM 80/160 GB Internal Tape Drive with VXA Technology
    • (#6258) - 36/72GB 4mm Internal Tape Drive
    • (#6279) - VXA-320 160/320GB Internal Tape Drive
  • Memory
    • (#1930) - 1024MB (2x512MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
    • (#1931) - 2048MB (2x1024MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
    • (#1932) - 4096MB (2x2048MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
    • (#1934) - 8192MB (2x4096MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
  • Miscellaneous
    • (#3752) - Service Package
    • (#6585) - DASD Locking Kit
    • (#7877) - Media Backplane
    • (#8227) - Tie-down Strap Security Device
    • (#8422) - SpaceBall 3D Input Device
    • (#8423) - Magellan XT 3D Input Device
    • (#8424) - SpaceBall 3D Input Device (USB)
    • (#8425) - SpaceMouse 3D Input Device (USB)
    • (#8841) - Mouse - USB, Business Black with Keyboard Attachment Cable
  • Processor
    • (#7319) - One Processor Entitlement for Processor Feature # 8327
    • (#7320) - One Processor Entitlement for Processor Feature #8330
    • (#7336) - One Processor Entitlement for Processor Feature #5326
    • (#7339) - One Processor Entitlement for Processor Feature #5327
    • (#8402) - Zero-priced Processor Entitlement for #5326
    • (#8403) - Zero-priced Processor Entitlement for #5327
    • (#8409) - Zero-priced Express Product Offering Processor Entitlement for #8327
    • (#8410) - Zero-priced Express Product Offering Processor Entitlement for #8330
  • Specify Codes
    • (#0265) - AIX Partition Specify
    • (#9004) - Southern Hemisphere Designator for Monitors
  • Tape
    • None
  • Pointing Device
    • (#8426) - SpacePilot 3D Input Device
    • (#8845) -USB Mouse

Feature availability matrix

The following feature availability matrix for MT 9111 uses the letter "A" to indicate features that are available and orderable on the specified models. "S" indicates a feature that is supported on the new model during a model conversion; these features will work on the new model, but additional quantities of these features cannot be ordered on the new model; they can only be removed. "N" indicates that the feature is not supported on the new model and must be removed during the model conversion. As additional features are announced, supported, or withdrawn, this list will be updated. Please check with your Marketing Representative for additional information.

         2  A = AVAILABLE  S = SUPPORTED
         8  N = NOT SUPPORTED, MUST BE REMOVED
         5 
FEAT/PN            DESCRIPTION
-------- - ----------------------------------------------------------
0050     A  IBM Express Seller Indicator
0265     A  AIX Partition Specify
0983     A  US TAA Compliance Indicator
1892     S  VXA-320 160/320GB Internal Tape Drive
1905     S  4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter
1907     S  Dual Channel SCSI RAID Enablement Daughter Card
1910     S  4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter
1912     S  PCI-X DDR Dual Channel Ultra320 LVD SCSI Adapter
1913     S  PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter
1930     S  1024MB (2x512MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
1931     S  2048MB (2x1024MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
1932     S  4096MB (2x2048MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
1934     S  8192MB (2x4096MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM
1954     S  4-Port 10/100/1000 Base-TX PCI-X Adapter
1968     S  73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
1969     S  146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
1970     S  36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
1971     S  73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
1972     S  146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
1973     S  300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
1974     S  PCI-X Dual Channel Ultra320 SCSI Adapter
1975     S  PCI-X Dual Channel Ultra320 SCSI RAID Adapter
1976     S  Dual Channel SCSI RAID Enablement Card
1977     S  2 Gigabit Fibre Channel PCI-X Adapter
1978     S  IBM Gigabit Ethernet-SX PCI-X Adapter
1979     S  IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
1980     S  POWER GXT135P Graphics Accelerator with Digital Support
1981     S  10 Gigabit Ethernet -SR PCI-X Adapter
1982     S  IBM 10 Gigabit Ethernet-LR PCI-X Adapter
1983     S  IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
1984     S  IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
1985     S  10/100 Mbps Ethernet PCI Adapter II
1986     S  1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter
1987     S  1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter
1991     A  36/72GB 4mm Internal Tape Drive
1992     S  IBM 80/160 GB Internal Tape Drive with VXA Technology
1993     A  IBM 4.7 GB IDE Slimline DVD-RAM Drive
1994     A  IDE Slimline DVD-ROM Drive
1997     S  200/400GB Half High Ultrium 2 Tape Drive
2114     S  PCI SCSI Adapter 16-Bit Differential External Y Cable
2118     S  Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
2424     S  0.6M 16-bit SCSI-2 System to System Cable
2425     S  2.5M 16-bit SCSI-2 System-to-System Cable
2456     A  LC-SC 50 Micron Fiber Converter Cable
2459     A  LC-SC 62.5 Micron Fiber Converter Cable
2591     S  External USB 1.44 MB Diskette Drive
2640     S  IDE Slimline DVD-ROM Drive
2738     S  2-Port USB PCI Adapter
2842     S  POWER GXT4500P Graphics Accelerator
2843     S  POWER GXT6500P Graphics Accelerator
2849     S  POWER GXT135P Graphics Accelerator with Digital Support
2861     S  ARTIC960Hx 4-Port EIA-232 Cable
2863     S  ARTIC960Hx 4-Port X.21 Cable
2864     S  ARTIC960Hx 4-Port V.35 (DTE) Cable
2934     A  Asynchronous Terminal/Printer Cable EIA-232
2936     A  Asynchronous Cable EIA-232/V.24
2943     S  8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
2944     S  128-Port Asynchronous Controller, PCI bus
2947     S  IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter
2951     S  Cable, V.24 / EIA-232
2952     S  Cable, V.35
2953     S  Cable, V.36 / EIA-499
2954     S  Cable, X.21
2962     S  2-Port Multiprotocol PCI Adapter
3124     A  Serial to Serial Port Cable for Drawer/Drawer
3125     A  Serial-to-Serial Port Cable for Rack/Rack
3274     S  73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
3275     S  146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
3277     S  36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
3278     S  73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
3279     S  146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
3578     S  300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly
3585     S  300 GB 15K RPM SCSI Disk Drive
3628     S  IBM P260/P275 Color Monitor, Business Black, and Cable
3636     S  L200P Flat Panel Monitor
3637     S  IBM T541H /L150p 15" TFT Color Monitor
3638     S  IBM C220p 21-inch Color Monitor, Business Black, and
            Cable
3639     S  IBM ThinkVision L170p Flat Panel Monitor
3640     S  ThinkVision L171p Flat Panel Monitor
3641     S  IBM T115 Flat Panel Monitor
3642     S  ThinkVision L191p Flat Panel Monitor
3643     S  IBM T120 Flat Panel Monitor
3644     S  IBM T119 Flat Panel Monitor
3645     S  IBM T117 Flat Panel Monitor
3752     S  Service Package
3925     A  Serial Port Converter Cable, 9-Pin to 25-Pin
3926     S  Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
3927     A  Serial Port Null Modem Cable, 9-pin to 9-pin, 3.7M
3928     A  Serial Port Null Modem Cable, 9-pin to 9-pin, 10M
4242     S  6-Foot Extender Cable for Displays (15-pin D-shell to
            15-pin D-shell)
4256     A  Extender Cable - USB Keyboards, 2M
4267     A  SCSI Cable, PCI Adapter to Hot-Swap Disks
4275     A  External SCSI Port Enablement Cable
4278     A  SCSI Cables (Power and Logic), PCI Riser to SCSI LVD
            Media Device; Mounting Tray
4959     S  IBM Token-Ring PCI Adapter
4962     S  10/100 Mbps Ethernet PCI Adapter II
5001     S  Custom Service Specify
5005     A  Software Preinstall
5170     A  Power Supply, 700 Watt AC
5326     S  1-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache
5327     S  2-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache
5700     S  IBM Gigabit Ethernet-SX PCI-X Adapter
5701     S  IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
5703     S  PCI-X Dual Channel Ultra320 SCSI RAID Adapter
5706     S  IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter
5707     S  IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter
5709     S  Dual Channel SCSI RAID Enablement Card
5712     S  PCI-X Dual Channel Ultra320 SCSI Adapter
5713     S  1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter
5714     S  1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter
5716     S  2 Gigabit Fibre Channel PCI-X Adapter
5718     S  10 Gigabit Ethernet -SR PCI-X Adapter
5719     S  IBM 10 Gigabit Ethernet-LR PCI-X Adapter
5721     S  10 Gb Ethernet-SR PCI-X 2.0 DDR Adapter
5722     S  10 Gb Ethernet-LR PCI-X 2.0 DDR Adapter
5723     S  2-Port Asynchronous EIA-232 PCI Adapter
5727     S  Dual Channel SCSI RAID Enablement Card
5736     S  PCI-X DDR 2.0 Dual Channel Ultra320 SCSI Adapter
5737     S  PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter
5740     S  4-Port 10/100/1000 Base-TX PCI-X Adapter
5751     S  IBM 4.7 GB IDE Slimline DVD-RAM Drive
5755     S  200/400GB Half High Ultrium 2 Tape Drive
5758     S  4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter
5759     S  4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter
5951     S  Full Width Quiet Touch Keyboard -- USB, US English, #103P
5952     S  Full Width Quiet Touch Keyboard -- USB, French, #189
5953     S  Full Width Quiet Touch Keyboard -- USB, Italian, #142
5954     S  Full Width Quiet Touch Keyboard -- USB, German/Austrian, #129
5955     S  Full Width Quiet Touch Keyboard -- USB, UK English, #166P
5956     S  Full Width Quiet Touch Keyboard -- USB, Spanish, #172
5957     S  Full Width Quiet Touch Keyboard -- USB, Japanese, #194
5958     S  Full Width Quiet Touch Keyboard -- USB, Brazilian
            Portuguese, #275
5959     S  Full Width Quiet Touch Keyboard -- USB, Hungarian, #208
5960     S  Full Width Quiet Touch Keyboard -- USB, Korean, #413
5961     S  Full Width Quiet Touch Keyboard -- USB, Chinese, #467
5962     S  Full Width Quiet Touch Keyboard -- USB, French Canadian, #445
5963     S  Full Width Quiet Touch Keyboard -- USB, Canadian French, #058
5964     S  Full Width Quiet Touch Keyboard -- USB, Belgian/French, #120
5965     S  Full Width Quiet Touch Keyboard -- USB, Swedish/Finnish, #153
5966     S  Full Width Quiet Touch Keyboard -- USB, Danish, #159
5967     S  Full Width Quiet Touch Keyboard -- USB, Bulgarian, #442
5968     S  Full Width Quiet Touch Keyboard -- USB, Swiss/French/
            German, #150
5969     S  Full Width Quiet Touch Keyboard -- USB, Norwegian,#155
5970     S  Full Width Quiet Touch Keyboard -- USB, Dutch, #143
5971     S  Full Width Quiet Touch Keyboard -- USB, Portuguese, #163
5972     S  Full Width Quiet Touch Keyboard -- USB, Greek, #319
5973     S  Full Width Quiet Touch Keyboard -- USB, Hebrew, #212
5974     S  Full Width Quiet Touch Keyboard -- USB, Polish, #214
5975     S  Full Width Quiet Touch Keyboard -- USB, Slovakian, #245
5976     S  Full Width Quiet Touch Keyboard -- USB, Czech, #243
5977     S  Full Width Quiet Touch Keyboard -- USB, Turkish, #179
5978     S  Full Width Quiet Touch Keyboard -- USB, LA Spanish, #171
5979     S  Full Width Quiet Touch Keyboard -- USB, Arabic, #253
5980     S  Full Width Quiet Touch Keyboard -- USB, Thai, #191
5981     S  Full Width Quiet Touch Keyboard -- USB, Russian, #443
5982     S  Full Width Quiet Touch Keyboard -- USB, Slovenian, #234
5983     S  Full Width Quiet Touch Keyboard -- USB, US English
            International, #103P
6120     S  IBM 80/160 GB Internal Tape Drive with VXA Technology
6204     S  PCI Universal Differential Ultra SCSI Adapter
6239     S  2 Gigabit Fibre Channel PCI-X Adapter
6258     S  36/72GB 4mm Internal Tape Drive
6271     S  LTO Ultrium 200GB Data Cartridge
6279     S  VXA-320 160/320GB Internal Tape Drive
6470     A  Power Cord (6-foot), To Wall (125V, 15A), Plug Type #4
6471     A  Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug
            Type #70
6472     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
            Type #18
6473     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
            Type 19
6474     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 13A), Plug
            Type #23
6475     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
            Type #32
6476     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
            Type #24
6477     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
            Type #22
6478     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug
            Type #25
6487     S  Power Cord (6-foot) ,To Wall, (250V, 15A), United
            States, Plug Type #5
6488     A  Power Cord (9-foot) , To Wall/OEM PDU, (125V, 15A or
            250V, 10A), Plug Type #2
6493     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
            Type #62
6494     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
            Type #69
6495     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
            Type #73
6496     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
            Type #66
6574     S  Ultra320 SCSI 4-Pack
6585     A  DASD Locking Kit
6598     S  Disk Slot Fillers (Quantity 4)
6651     A  Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug
            Type #75
6659     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug
            Type #76
6670     A  Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59
            (DENAN marking)
6680     A  Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug
            Type #6, Insulated
6687     A  Power Cord (6-foot),To Wall, (250V, 15A), Plug Type #57
            (DENAN marking)
7305     A  AAP Software Pre-Install Indicator
7319     S  One Processor Entitlement for Processor Feature # 8327
7320     S  One Processor Entitlement for Processor Feature #8330
7336     S  One Processor Entitlement for Processor Feature #5326
7339     S  One Processor Entitlement for Processor Feature #5327
7801     A  Ethernet Cable, 6M, Hardware Management Console to System
            Unit
7802     A  Ethernet Cable, 15M, Hardware Management Console to
            System Unit
7877     S  Media Backplane
8131     S  128-Port Asynchronous Controller Cable, 4.5 Meter
8132     S  128-Port Asynchronous Controller Cable, 23cm (9-Inch)
8133     S  RJ-45 to DB-25 Converter Cable
8136     S  Rack Mountable Remote Asynchronous Node 16-Port EIA-232
8137     S  Enhanced Remote Asynchronous Node 16-Port EIA-232
8227     S  Tie-down Strap Security Device
8231     S  Memory Offering -- 32GB/64GB/96GB/128GB (Multiples of
            4 of 2x4GB DIMMs)
8244     S  Audio PCI Adapter for Workstations
8327     A  1-core 1.65 GHz POWER5+ Processor Card, 36MB L3 Cache
8330     A  2-core 1.9 GHz POWER5+ Processor Card, 36MB L3 Cache
8402     S  Zero-priced Processor Entitlement for #5326
8403     S  Zero-priced Processor Entitlement for #5327
8409     S  Zero-priced Express Product Offering Processor
            Entitlement for #8327
8410     S  Zero-priced Express Product Offering Processor
            Entitlement for #8330
8422     S  SpaceBall 3D Input Device
8423     S  Magellan XT 3D Input Device
8424     S  SpaceBall 3D Input Device (USB)
8425     S  SpaceMouse 3D Input Device (USB)
8426     S  SpacePilot 3D Input Device
8800     S  Quiet Touch Keyboard - USB, Business Black, US English,
            #103P
8801     S  Quiet Touch Keyboard - USB, Business Black, French, #189
8802     S  Quiet Touch Keyboard - USB, Business Black, Italian, #142
8803     S  Quiet Touch Keyboard - USB, Business Black,
            German/Austrian, #129
8804     S  Quiet Touch Keyboard - USB, Business Black, UK English,
            #166
8805     S  Quiet Touch Keyboard - USB, Business Black, Spanish, #172
8806     S  Quiet Touch Keyboard - USB, Business Black, Japanese,
            #194
8807     S  Quiet Touch Keyboard - USB, Business Black,
            Brazilian/Portuguese, #275
8808     S  Quiet Touch Keyboard - USB, Business Black, Canadian
            French, #058
8810     S  Quiet Touch Keyboard - USB, Business Black,
            Belgian/Dutch, #120
8811     S  Quiet Touch Keyboard - USB, Business Black,
            Swedish/Finnish, #153
8812     S  Quiet Touch Keyboard - USB, Business Black, Danish, #159
8813     S  Quiet Touch Keyboard - USB, Business Black, Bulgarian,
            #442
8814     S  Quiet Touch Keyboard - USB, Business Black,
            Swiss/French/German, #150F/G
8816     S  Quiet Touch Keyboard - USB, Business Black, Norwegian,
            #155
8817     S  Quiet Touch Keyboard - USB, Business Black, Dutch, #143
8818     S  Quiet Touch Keyboard - USB, Business Black, Portuguese,
            #163
8819     S  Quiet Touch Keyboard - USB, Business Black, Greek, #319
8820     S  Quiet Touch Keyboard - USB, Business Black, Hebrew, #212
8821     S  Quiet Touch Keyboard - USB, Business Black, Hungarian,
            #208
8823     S  Quiet Touch Keyboard - USB, Business Black, Polish, #214
8825     S  Quiet Touch Keyboard - USB, Business Black, Slovakian,
            #245
8826     S  Quiet Touch Keyboard - USB, Business Black, Czech, #243
8827     S  Quiet Touch Keyboard - USB, Business Black, Turkish, #179
8829     S  Quiet Touch Keyboard - USB, Business Black, LA Spanish,
            #171
8830     S  Quiet Touch Keyboard - USB, Business Black, Arabic, #238
8833     S  Quiet Touch Keyboard - USB, Business Black, Korean, #413
8834     S  Quiet Touch Keyboard - USB, Business Black, Chinese/US,
            #467
8835     S  Quiet Touch Keyboard - USB, Business Black, French
            Canadian, #445
8836     S  Quiet Touch Keyboard - USB, Business Black, Thai, #191
8838     S  Quiet Touch Keyboard - USB, Business Black, Russian, #443
8839     S  Quiet Touch Keyboard - USB, Business Black,
            Yugoslavian/Latin, #105
8840     S  Quiet Touch Keyboard - USB, Business Black, US English
            (EMEA), #103P
8841     S  Mouse - USB, Business Black with Keyboard Attachment
            Cable
8845     S  USB Mouse
9004     A  Southern Hemisphere Designator for Monitors
9300     A  Language Group Specify - US English
9700     A  Language Group Specify - Dutch
9703     A  Language Group Specify - French
9704     A  Language Group Specify - German
9705     A  Language Group Specify - Polish
9707     A  Language Group Specify - Portuguese
9708     A  Language Group Specify - Spanish
9711     A  Language Group Specify - Italian
9712     A  Language Group Specify - Canadian French
9714     A  Language Group Specify - Japanese
9715     A  Language Group Specify - Traditional Chinese (Taiwan)
9716     A  Language Group Specify - Korean
9718     A  Language Group Specify - Turkish
9719     A  Language Group Specify - Hungarian
9720     A  Language Group Specify - Slovakian
9721     A  Language Group Specify - Russian
9722     A  Language Group Specify - Simplified Chinese (PRC)
9724     A  Language Group Specify - Czech
9725     A  Language Group Specify -- Romanian
9727     A  Language Group Specify -- Slovenian
 

Feature descriptions

The following is a list of all feature codes in numeric order for the IBM RS/6000 or pSeries 9111 machine type.

Attributes, as defined in the following feature descriptions, state the interaction of requirements among features.

Minimums and maximums are the absolute limits for a single feature without regard to interaction with other features. The maximum valid quantity for MES orders may be different than for initial orders. The maximums listed below refer to the largest quantity of these two possibilities.

The order type defines if a feature is orderable only on initial orders, only on MES orders, on both initial and MES orders, or if a feature is supported on a model due to a model conversion. Supported features cannot be ordered on the converted model, only left on or removed from the converted model.

(#0050) IBM Express Seller Indicator

This feature is a no-charge feature used for administrative purposes by IBM and IBM Business Partners.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#0050)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#0265) AIX Partition Specify

This feature number is used to indicate the number of partitions the system will have running under AIX.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#0265)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX V5.2 or AIX V5.3, or later
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#0983) - US TAA Compliance Indicator

This feature indicates that the product was assembled in a manufacturing plant in the USA or in a country approved under the US Trade Agreement Act.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#0983)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#1892) - VXA-320 160/320GB Internal Tape Drive

(No Longer Available as of November 28, 2008)

The IBM 160/320 GB Internal Tape Drive with VXA* Technology is a 5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high capacity for save/restore and archive functions. The tape drive uses "X" media VXAtape* data cartridges and is compression capable, providing a capacity of up to 320 GB - a significant increase in capacity, and data transfer rate over the previous internal tape drives.

Characteristics

  • Capacity: 160 GB native mode
  • Capacity: 320 GB compress mode, typical
  • Form Factor: 5.25-inch half high
  • Media: uses VXAtape "X" media data cartridges
  • Technology: Helical scan, rotating head
  • Operation: Streaming
  • Data Transfer Rate: 12 MBps native mode, 24MBps (typical) compression
  • Interface: SCSI-2,SCSI-3 Ultra 160 (LVD) asynchronous/synchronous
  • VXA-320 is read/write capable on X23, X10 and X6 media
  • Compatibility: VXA-2 format (Read/Write) on X6, X10, and X23, VXA-320 format (Read/Write) on X6, X10, and X23.
  • Attributes provided: One 160/320GB internal tape drive
  • Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal 16-bit address
  • For 9111-285: (#1892)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: No
    • Return parts MES: No
(#1905) - 4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter

(No Longer Available as of May 29, 2009)

The 4 Gigabit Single-Port Fibre Channel PCI-X 2.0 DDR Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high-speed local and remote located storage. The adapter will auto-negotiate for the highest data rate between adapter and an attaching device at 1 Gbps, 2 Gbps or 4 Gbps of which the device or switch is capable. Distances up to 500 meters running at 1 Gbps data rate, up to 300 meters running at 2 Gbps data rate, and 4 Gbps data rate up to 150 meters are supported between the adapter and an attaching device or switch. When used with IBM Fibre Channel storage switches supporting long-wave optics, distances up to 10 kilometers are capable running at either 1 Gbps, 2 Gbps, or 4 Gbps data rates.

The 4 Gigabit Single-Port Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.

There are two maximum quantities for High Bandwidth adapters, one for performance, and one for connectivity. Adapter performance may be limited by bandwidth constraints in a network. To maximize High Bandwidth adapter performance in the server the performance maximum quantity should not be exceeded. In applications where the end-to-end network cannot sustain high performance and or connectivity is more important than overall bandwidth performance the performance maximum quantity can be exceeded up to the connectivity maximum quantity.

  • Connectivity Maximum: (3)
  • Performance Maximum: (3)

Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.

http://www.ibm.com/servers/storage/product/products_p series.html

Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.

  • Attributes provided: 1 Fibre Channel
  • Attributes required: 1 empty PCI or PCI-X 1.0 / 2.0 slot
  • For 9111-285: (#1905)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: AIX 5L Version 5.2 with the 5200-08 Technology Level (APAR IY77270) plus APAR IY83649 and IY83172, or later Technology Level. AIX 5L Version 5.3 with the 5300-04 Technology Level (APAR IY77273) plus APAR IY83730 and IY83163, or later Technology Level. SUSE Linux Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS 4 for POWER, or later. Refer to the following URL for systems and features that operate with Linux:
             http://www.ibm.com/servers/eserver/pseries/
             hardware/factsfeatures.html
       
      
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No

    Note: The minimum system firmware level required to operate in Single Data Rate (SDR) mode is SF235_185. The minimum system firmware level required to operate in Double Data Rate (DDR) mode is SF240_205.

    System firmware can be downloaded from:

    http://techsupport.services.ibm.com/server/mdownload2 /download.html

(#1907) Dual Channel SCSI RAID Enablement Daughter Card

(No Longer Available as of August 28, 2009)

The Dual Channel SCSI RAID Enablement Card (#1907) is a bootable high performance SCSI RAID Enablement feature providing RAID 0,5, or 10 capability to select pSeries systems with the appropriate supporting integrated SCSI adapter and internal multiple disk drives or packs of drives. To increase the data writing performance, a 40 MByte non- volatile fast-write cache is provided as a resident part of this feature. The 40 MByte fast-write cache can provide an improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrity. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors.

Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following Web page URL:

http://techsupport.services.ibm.com/server/mdownload/

Limitation: Even though the supporting integrated adapter with the Dual Channel SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.

  • Attributes provided: Internal disk drives can be configured as an array.
  • Attributes required: System with supporting integrated SCSI adapter and disk drives.
  • For 9111-285: (#1907)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1910) - 4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter

(No Longer Available as of July 30, 2010)

The 4 Gigabit Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high-speed local and remote located storage. The adapter will auto-negotiate for the highest data rate between adapter and an attaching device at 1 Gbps, 2 Gbps or 4 Gbps of which the device or switch is capable. Between the adapter and an attaching device or switch, the distances supported are up to: 500 meters running at 1 Gbps data rate, 300 meters running at 2 Gbps data rate, and 150 meters running at 4 Gbps data rate. When used with IBM Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gbps, 2 Gbps, or 4 Gbps data rates.

The 4 Gb Dual-Port Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.

There are two maximum quantities for High Bandwidth adapters, one for performance, and one for connectivity. Adapter performance may be limited by bandwidth constraints in a network. To maximize High Bandwidth adapter performance in the server the performance maximum quantity should not be exceeded. In applications where the end-to-end network cannot sustain high performance and or connectivity is more important than overall bandwidth performance the performance maximum quantity can be exceeded up to the connectivity maximum quantity.

  • Connectivity Maximum: (3)
  • Performance Maximum: (2)

Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.

http://www.ibm.com/servers/storage/product/products_p series.html

Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.

Note: Please carefully consider the usage of this card. If placed in a PCI-X slot rated as SDR compatible and/or has the slot speed of 133 MHz, the AIX value of the max_xfer_size must be kept at the default setting of 0x100000 (1 megabyte) when both ports are in use. The architecture of the DMA buffer for these slots does not accommodate larger max_xfer_size settings.

  • Attributes provided: 2 Fibre Channel
  • Attributes required: 1 empty PCI or PCI-X 2.0 slot
  • For 9111-285: (#1910)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: AIX 5L Version 5.2 with the 5200-08 Technology Level (APAR IY77270) plus APAR IY83649 and IY83172, or later Technology Level. AIX 5L Version 5.3 with the 5300-04 Technology Level (APAR IY77273) plus APAR IY83730 and IY83163, or later Technology Level. SUSE Linux Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS 4 for POWER, or later. Refer to the following URL for systems and features that operate with Linux:
             http://www.ibm.com/servers/eserver/pseries/
             hardware/factsfeatures.html
       
      
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No

    Note: The minimum system firmware level required to operate in Single Data Rate (SDR) mode is SF235_185. The minimum system firmware level required to operate in Double Data Rate (DDR) mode is SF240_205.

    System firmware can be downloaded from:

    http://techsupport.services.ibm.com/server/mdownload2 /download.html

(#1912) PCI-X DDR Dual Channel Ultra320 LVD SCSI Adapter

(No Longer Available as of July 30, 2010)

The PCI-X DDR Dual Channel Ultra320 SCSI Adapter (#1912) is a 64-bit 3.3 volt adapter and is an excellent solution for high-performance SCSI applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two SCSI channels (busses), each capable of running 320 MBps (max.). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds.

In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device.

Two VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X DDR Dual Channel Ultra320 SCSI Adapter.

Two external ports provide connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter.

The PCI-X Dual Channel Ultra320 SCSI Adapter (#1912) is a native boot adapter with AIX 5.2L or later software in a supported pSeries or RS/6000 systems. The adapter also supports target mode.

Limitations:

  • The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105.
  • Even though the Dual Channel Ultra320 SCSI nonRAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.
  • To obtain microcode update go to the following Web page URL:
    http://techsupport.services.ibm.com/server/mdownload/
  • Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices
  • Attributes required: One available 3.3 volt PCI or PCI-X slot or PCI-X 2.0 DDR slot
  • For 9111-285: (#1912)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 5)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1913) PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter

(No Longer Available as of August 28, 2009)

The PCI-X DDR Dual Channel Ultra320 SCSI RAID LVD only Adapter (#1913) is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing RAID 0, 5, 6, or 10 capability, and can address up to thirty 16-bit SCSI physical disk drives on two independent SCSI buses.

To increase the data writing performance, a 90 MByte non-volatile fast-write cache is a resident part of this adapter. The 90 MByte fast- write cache can provide a significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.

The Dual Channel Ultra320 SCSI RAID Adapter has two independent ultra320 SCSI buses. There are two internal ports and two external ports. The two internal ports are shared with the two external ports. The SCSI busses can drive either an internal port or an external port. The internal ports can be used to provide an internal RAID solution on certain supporting pSeries systems with internal multiple disk drives or packs of drives. Internally attached Ultra320 devices designed to run at 320 MB can run up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds.

In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. All attaching devices should be Ultra320 LVD devices to utilize the 320 MB per second performance, however, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. This card does not support single-ended (SE) devices.

When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array (attached to either the internal or the external ports) are required to be formatted to 522-byte sectors. 522-byte sectors provide additional CRC error checking for improved data integrity. A menu option provide in the AIX supporting software, which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512-byte sectors.

Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. In addition, there are some disk drives, which do not support 522 Byte Sectors format. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following web page URL:

Two VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD external subsystems.

Limitations:

  • Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.

Minimum System Firmware Required:

System firmware level required is SF235_185 or greater. Firmware level SF235_185 adjusts the PCI slots to run in Single Data Rate (SDR) mode. Enablement of Double Data Rate (DDR)slots to run at DDR mode is planned to be provided in an upcoming firmware enhancement.

For Double Data Rate (DDR), check for firmware upgrade at URL:

Running the adapter on a system with firmware level lower than SF235_185 is not supported.

  • Attributes provided: Attachment of internal and external SCSI devices
  • Attributes required: One PCI or PCI-X DDR bus slot
  • For 9111-285: (#1913)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1930) 1024MB (2x512MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM

(No Longer Available as of July 29, 2011)

Provides 1024MB of system memory with 2 512MB DIMMs.

  • Attributes provided: 1024MB of system memory.
  • Attributes required: Two empty memory DIMM positions
  • For 9111-285: (#1930)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1931) 2048MB (2x1024MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM

(No Longer Available as of July 29, 2011)

Provides 2048MB of system memory with 2 1024MB DIMMs.

  • Attributes provided: 2048MB of system memory.
  • Attributes required: Two empty memory DIMM positions.
  • For 9111-285: (#1931)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1932) 4096MB (2x2048MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM

(No Longer Available as of July 29, 2011)

Provides 4096MB of system memory with 2 2048MB DIMMs.

  • Attributes provided: 4096MB of system memory.
  • Attributes required: Two empty memory DIMM positions.
  • For 9111-285: (#1932)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1934) 8192MB (2x4096MB) DIMMs, 276-PIN, 533 MHz DDR-2 SDRAM

(No Longer Available as of July 29, 2011)

Provides 8192MB of system memory with 2 4096MB DIMMs.

  • Attributes provided: 8192MB of system memory.
  • Attributes required: Two empty memory DIMM positions.
  • For 9111-285: (#1934)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1954) 4-Port 10/100/1000 Base-TX PCI-X Adapter

(No Longer Available as of November 27, 2009)

The 4-Port 10/100/1000 Base -TX PCI-X adapter is a full height PCI-X 1.0a Ethernet adapter which supports four Gigabit ports on a single adapter, delivers increased bandwidth for slot-constrained servers, and is designed to provide high connectivity and reliability using two integrated, dual-port Gigabit Ethernet controllers.

  • Four RJ-45 ports
  • 3.3 volts, 64-bit 133 MHz with 64-bit Bus Mastering on the PCI-X bus
  • IEEE 802.3ab 1000Base-T compliant
  • IEEE 802.3u 100Base-T compliant
  • IEEE 802.3 10Base-T compliant
  • 802.1q VLAN tagging
  • Interrupt Moderation
  • TCP Segmentation offload and encapsulation in hardware
  • Checksum offloading of IP, TCP, and UDP frame
  • Increased connectivity while significantly reducing CPU utilization
  • Two LED adapter status indicators per port for link activity and speed
  • NIM is supported on all 4 ports
  • RoHS compliant

Limit Full bandwidth performance may not be achieved with more than one adapter per PCI Host Bridge (PHB) or more than one CPU.

  • Attributes provided: Four 10/100/1000 RJ-45 ports
  • Attributes required: One available PCI-X card slot
  • For 9111-285: (#1954)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1968) 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

(No Longer Available as of May 25, 2007)

The 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 4.82 ms (based on four(4) READS to one (1) WRITE)
  • Average Latency: 2.99 ms
  • Rotational Speed: 10,000 RPM
  • Maximum Data Transfer Rate: 67 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 73.4 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#1968)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1969) 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

(No Longer Available as of May 25, 2007)

The 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 146.8 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 4.94 ms (based on four (4) READS to one (1) WRITE)
  • Average Latency: 2.99 ms
  • Rotational Speed: 10,000 RPM
  • Maximum Data Transfer Rate: 67 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 146.8 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#1969)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1970) 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly

(No Longer Available as of February 23, 2007)

The 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
  • Average Latency: 2 ms
  • Rotational Speed: 15,000 RPM
  • Maximum Data Transfer Rate: 83 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 36.4 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#1970)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1971) 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly

(No Longer Available as of January 30, 2009)

The 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
  • Average Latency: 2 ms
  • Rotational Speed: 15,000 RPM
  • Maximum Data Transfer Rate: 83 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 73.4 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#1971)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1972) 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly

(No Longer Available as of August 28, 2009)

The 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 146.8 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
  • Average Latency: 2 ms
  • Rotational Speed: 15,000 RPM
  • Maximum Data Transfer Rate: 107 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 146.8 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#1972)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1973) 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

(No Longer Available as of September 14, 2007)

The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 4.9 ms (based on four (4) READS to one (1) WRITE)
  • Average Latency: 2.99 ms
  • Rotational Speed: 10,000 RPM
  • Maximum Data Transfer Rate: 88 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 300 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#1973)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1974) PCI-X Dual Channel Ultra320 SCSI Adapter

(No Longer Available as of March 31, 2006)

The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a 64-bit 3.3 volt adapter and is an excellent solution for high-performance SCSI applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two SCSI channels (busses), each capable of running 320 MBps (max.), up to twice the maximum data transfer rate of the previous Dual Channel Ultra3 SCSI adapter (160 MBps). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds.

In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device.

Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI Adapter.

The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate. The two external ports also provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also the two external ports provide connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter.

The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a native boot adapter with AIX 5.1 or AIX 5.2 software in a supported pSeries or RS/6000 systems. The adapter also supports target mode.

Limitations:

  • The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105.
  • Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.
  • Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following Web page URL:
    http://techsupport.services.ibm.com/server/mdownload/
  • Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices
  • Attributes required: One available 3.3 volt PCI or PCI-X slot
  • For 9111-285: (#1974)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 5)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1975) PCI-X Dual Channel Ultra320 SCSI RAID Adapter

(No Longer Available as of March 31, 2006)

The PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5703) is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI physical disk drives on two independent SCSI buses.

To increase the data writing performance, a 40 MByte non-volatile fast-write cache is provided as a resident part of this adapter. The 40 MByte fast-write cache can provide a significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.

The Dual Channel Ultra320 SCSI RAID Adapter has two independent ultra320 SCSI buses. There are two internal ports and two external ports. The two internal ports are shared with the two external ports. The SCSI busses can drive either an internal port or an external port. The internal ports can be used to provide an internal RAID solution on certain supporting pSeries systems with internal multiple disk drives or packs of drives. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds.

In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device.

When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array (attached to either the internal or external ports) are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrity. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors.

Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following Web page URL:

http://techsupport.services.ibm.com/server/mdownload/

Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI RAID Adapter.

The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate configured as either a non-array or an array of disks Also the two external ports provide non-array connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter.

Limitations:

  • The two external ports provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only non-array configuration support.
  • The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105.
  • Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.
  • Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following Web page URL:
    http://techsupport.services.ibm.com/server/mdownload/
  • Attributes provided: Attachment of internal and external SCSI devices
  • Attributes required: One PCI or PCI-X bus slot
  • For 9111-285: (#1975)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1976) Dual Channel SCSI RAID Enablement Card

The Dual Channel SCSI RAID Enablement Card (#5709) is a bootable high performance SCSI RAID Enablement feature providing RAID 0,5, or 10 capability to select pSeries systems with the appropriate supporting integrated SCSI adapter and internal multiple disk drives or packs of drives.

To increase the data writing performance, a 16 MByte non-volatile fast-write cache is provided as a resident part of this feature. The 16 MByte fast-write cache can provide an improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.

When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrity. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors.

Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following Web page URL:

http://techsupport.services.ibm.com/server/mdownload/

Limitations:

  • Even though the supporting integrated adapter with the Dual Channel SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.
  • Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following Web page URL:
    http://techsupport.services.ibm.com/server/mdownload/
  • Attributes provided: Internal disk drives to be configured as an array.
  • Attributes required: Systems with supporting integrated SCSI adapter.
  • For 9111-285: (#1976)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#1977) 2 Gigabit Fibre Channel PCI-X Adapter

(No Longer Available as of July 27, 2007)

The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of which the device or switch is capable. Distances of up to 500 meters running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gps or 2 Gps data rates.

The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.

Note: Requires AIX V5.2 or later, if AIX V5.1 or SLES 8 is required order Feature Code #6239-2 Gigabit Fibre Channel PCI-X Adapter

Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.

http://www.storage.ibm.com/hardsoft/disk/products.htm

Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.

  • Attributes provided: 1 Fibre Channel/FC-AL interface
  • Attributes required: 1 empty PCI or PCI-X slot
  • For 9111-285: (#1977)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1978) IBM Gigabit Ethernet-SX PCI-X Adapter

(No Longer Available as of May 29, 2009)

The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connection with throughput on a standard shortwave multimode optical cable which conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter.

Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot.

Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#1978) incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required.

Limitation: Half Duplex (HDX) mode is not supported.

  • Attributes provided: One full-duplex 1000Base-SX fiber connection to a Gigabit Ethernet LAN.
  • Attributes required: One available PCI or PCI-X card slot
  • For 9111-285: (#1978)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 5)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1979) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter

(No Longer Available as of May 29, 2009)

The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via the PCI-X bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed.

Note: For optimum performance, adapter should be placed in a 64 bit PCI-X card slot.

Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode.

  • Attributes provided: One full-duplex 10/100/1000Base-TX UTP connection to a Gigabit Ethernet LAN.
  • Attributes required: One available PCI or PCI-X card slot
  • For 9111-285: (#1979)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 5)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1980) POWER GXT135P Graphics Accelerator with Digital Support

(No Longer Available as of November 27, 2009)

The POWER GXT135P is a versatile, low-priced 2D graphics accelerator for RS/6000 workstations and pSeries servers. It can be configured to operate in either 8-bit or 24-bit color modes. This adapter supports both analog and digital monitors. Its predecessor, Feature Number 2848, supported only analog monitors.

  • Hardware Description
    • 128-bit graphics processor
    • 8-bit CLUT or 24-bit true color
    • 16 MB SDRAM
    • 32-bit PCI interface
    • Universal PCI (5.0v or 3.3v)
    • 1 hardware color map
  • Features Supported
    • Up to approximately 16.7 million colors
    • Rectangular clipping
    • 2 analog monitor outputs at up to 1280 x 1024 resolution
    • 1 analog monitor output at up to 2048 x 1536 resolution
    • 1 digital monitor output at up to 1600 x 1200 resolution
    • 60 to 85 Hz refresh rates (ISO 9241, Part 3)
  • APIs Supported
    • X-Windows and Motif
    • UMS 2.3.0 (no hardware scaling)
  • Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital support),or later, or AIX 4.3 (analog support only)
  • Attributes provided: 2D Graphics
  • Attributes required: 1 PCI slot
  • For 9111-285: (#1980)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1981) 10 Gigabit Ethernet -SR PCI-X Adapter

(No Longer Available as of May 31, 2006)

Provides 10 Gigabit Ethernet PCI-X based server connections. Supports distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um multimode fiber with 2000MHz km minimum model bandwidth at 850 nm. Adapter connector type is LC.

  • Attributes provided: Provides highend bandwidth for networking
  • Attributes required: Supported on PCI-X slots only
  • For 9111-285: (#1981)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1982) IBM 10 Gigabit Ethernet-LR PCI-X Adapter

(No Longer Available as of May 31, 2006)

Offers 10 Gigabit Ethernet PCI-X based server connections over a maximum of 10 kilometers of 1310nm single-mode fiber optic cable. The adapter conforms to the IEEE 802.3ae standard. The adapter requires 9um single-mode fiber optic cables and uses a SC connector type for connecting into net-work infrastructure components like 10 Gigabit Ethernet switch/router with SC connectors.

  • Attributes provided: 10 Gigabit Ethernet connections
  • Attributes required: Available PCI-X slot
  • For 9111-285: (#1982)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1983) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter

(No Longer Available as of May 27, 2011)

The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex, dual ported, Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run each port at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via a PCI or PCI-X bus and connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed.

A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided.

The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#1983) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#1979) is the preferred solution.

Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible.

Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode.

  • Attributes provided: Two full-duplex 10/100/1000Base-TX UTP connections to Gigabit Ethernet LAN(s).
  • Attributes required: One available PCI or PCI-X card slot
  • For 9111-285: (#1983)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 5)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1984) IBM 2-PORT Gigabit Ethernet-SX PCI-X Adapter

(No Longer Available as of May 29, 2009)

The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a standard shortwave multimode optical cable that conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter.

A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided.

The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#1984) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM Gigabit Ethernet-SX PCI-X Adapter (#1978) is the preferred solution.

Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible.

Note: The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required.

Limitation: Half Duplex (HDX) mode is not supported.

  • Attributes provided: Two full-duplex 1000Base-SX fiber connections to a Gigabit Ethernet LAN(s).
  • Attributes required: One available PCI or PCI-X card slot
  • For 9111-285: (#1984)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 5)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1985) 10/100 Mbps Ethernet PCI Adapter II

The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single port PCI ethernet adapter. This high performance, low power ethernet 10/100Mbps LAN adapter can be used in both client and server PCI systems. The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and 100Base-TX full duplex ethernet LAN connectivity. The adapter supports Category-5 unshielded twisted pair cabling for both 10/100 Mbps and Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps Ethernet PCI Adapter II supports:

  • Half / Full Duplex 10/100 Mbps Ethernet interface
  • 10/100 Mbps data rates
  • Auto-negotiation for 10/100 speed and half/full duplex
  • Network boot capability and Network Install Manager (NIM)
  • IEEE 802.3 Ethernet Specification
  • IEEE 802.3u Fast Ethernet Specification

After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the off-load of IP Security cryptographic algorithms by providing hardware assistance in performing data encryption and authentication. This support is provided with AIX 5.1 (with appropriate software updates)and later software. This IP Security function, normally performed with encryption software by the host, is off-loaded to this adapter to enhance network traffic throughput and reduce CPU utilization. If you are running with AIX 5.1, to invoke the IP Security function on the adapter, you must obtain AIX 5.1 software updates IY27069 and IY26514 or the 5100-02 Recommended Maintenance package. These updates can be obtained by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD (LCD4-1103-03) dated 4/2002 or later.

Note: This IP Security function is not supported with AIX 4.3 software.

An additional function called 'Large Send' or sometimes known as TCP Segmentation is also available. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also available. Both these functions are available with AIX version 5.1 with APAR IY38248 or later software, or AIX version 5.2 with APAR IY38492 or later software.

  • Attributes provided: One 10/100 Mbps Ethernet port (connector)
  • Attributes required: One PCI slot
  • For 9111-285: (#1985)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#1986) 1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter

(No Longer Available as of July 30, 2010)

The 1 Gigabit iSCSI TOE PCI-X adapter encapsulates SCSI Commands and data into TCP and transports them over the Ethernet via IP packets. The adapter operates as an iSCSI TOE (TCP/IP Offload Engine). This offload function eliminates host protocol processing and reduces CPU interrupts. Adapter uses RJ45 Gigabit Ethernet connector.

  • Attributes provided: Offload of host protocol processing
  • Attributes required: Available PCI-X Slot
  • For 9111-285: (#1986)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: AIX 5.2 or AIX 5.3, or later. Refer to the following URL for systems and features that operate with Linux:
      http://www.ibm.com/servers/eserver/pseries/hardware/
      factsfeatures.html
       
      
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1987) 1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter

(No Longer Available as of November 28, 2008)

The 1 Gigabit iSCSI TOE PCI-X adapter encapsulates SCSI Commands and data into TCP and transports them over the Ethernet via IP packets. The adapter operates as an iSCSI TOE (TCP/IP Offload Engine). This offload function eliminates host protocol processing and reduces CPU interrupts. Adapter uses Small form factor LC type fiber optic connector.

  • Attributes provided: Offload of host protocol processing
  • Attributes required: Available PCI-X Slot
  • For 9111-285: (#1987)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: AIX 5.2 or AIX 5.3, or later. Refer to the following URL for systems and features that operate with Linux:
      http://www.ibm.com/servers/eserver/pseries/hardware/
      factsfeatures.html
       
      
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1991) 36/72 4mm Internal Tape Drive

(No Longer Available as of May 29, 2009)

The 36/72 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high, single-ended 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses IBM 4-mm data cartridges and is compression capable, providing a capacity of up to 72 GB - a significant increase in capacity over the previous 20/40 4-mm internal tape drives (when using DDS-4 media).

Characteristics:

  • Capacity: 36 GB native mode, 72 GB (typical) compression mode
  • Form Factor: 5.25-inch half high
  • Technology: Helical scan, rotating head
  • Operation: Streaming
  • Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression
  • Interface: SCSI-2 (LVD) asynchronous/synchronous
  • Media Formats Supported:
    • DDS3 12GB (R/W)
    • DDS4 20GB (R/W)
    • DAT72 36GB (R/W)
  • Compatibility:
    • 12GB mode (Read/Write), 24GB compression (Read/Write)
    • 20GB mode (Read/write), 40GB compression (Read/Write)
    • 36GB mode (Read/Write), 72GB compression (Read/Write).

Note: MES orders are shipped with black bezel.

  • Attributes provided: 4mm tape capability
  • Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal SE 16-bit address
  • For 9111-285: (#1991)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: No
    • Return parts MES: No
(#1992) IBM 80/160 GB Internal Tape Drive with VXA Technology

(No longer available as of February 29, 2008)

The IBM 80/160 GB Internal Tape Drive with VXA* Technology is a 5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses VXAtape* data cartridges and is compression capable, providing a capacity of up to 160 GB - a significant increase in capacity over the previous internal tape drives.

Characteristics

  • Capacity: 80 GB native mode, 160 GB (typical) compression mode
  • Form Factor: 5.25-inch half high
  • Media: uses VXAtape data cartridges
  • Technology: Helical scan, rotating head
  • Operation: Streaming
  • Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression
  • Interface: SCSI-2 (LVD/SE) asynchronous/synchronous
  • Compatibility: 80 GB mode (Read/Write), 160 GB compression (Read/Write)
  • Attributes provided: One 80/160 GB internal tape drive
  • Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal 16-bit address
  • For 9111-285: (#1992)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: No
    • Return parts MES: No
(#1993) IBM 4.7 GB IDE Slimline DVD-RAM Drive

(No Longer Available as of May 29, 2009)

The IBM 4.7 GB IDE Slimline DVD-RAM Drive is an internal tray loading, multifunction storage device capable of reading and writing 4.7GB DVD-RAM discs as well as reading a multitude of other optical media discs. This drive also reads Type II (removable from cartridge) DVD-RAM discs. It is a 12.7mm high Slimline form factor, multi-session capable, DVD-RAM drive which provides state of the art performance. System boot and install functions are supported with CD-ROM and DVD-RAM media.

Characteristics:

  • Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer diameter; 10.8MB/sec read (8X DVD-ROM); 2.7MB/sec write (2X DVD-RAM) and 2.7MB/sec read (2X DVD-RAM)
  • Interface: Parallel IDE
  • Average Random Access Time: 150ms CD-ROM; 180ms DVD-ROM; 229ms DVD-RAM
  • Buffer Memory: 2MB
  • High-speed burst rate of 16/16/33 MB/second for PIO / MDMA / UDMA transfers respectively
  • Loading tray accommodates both 8cm discs and 12cm discs.
  • Operates in either vertical or horizontal position
  • Reads multi-session discs
  • Reads CD-ROM, CD-R, CD-RW, DVD-ROM, & DVD-RAM discs.
  • Reads 2.6GB DVD-RAM media; reads and writes 4.7GB and 9.4GB double sided) DVD-RAM media
  • Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA and audio

Limitations:

  • DVD video is not supported.
  • Drive only reads CD-type formatted media with AIX 5.1.
  • Attributes provided: One 4.7GB IDE Slimline DVD-RAM Drive
  • Attributes required: One IDE 12.7mm high media bay
  • For 9111-285: (#1993)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1994) IDE Slimline DVD-ROM Drive

(No Longer Available as of May 29, 2009)

The 8X/24X(max) Slimline IDE DVD-ROM Drive is an internal tray loading DVD-ROM drive providing up to 3600KB/sec (CD-ROM) and 10.3MB/sec (DVD-ROM) data transfer rates. It is a 12.7mm Slimline form factor multi-session capable, DVD-ROM drive which provides state of the art performance and supports existing 650MB CD-ROM, 4.7 GB DVD-ROM, and 9.4 GB DVD-ROM (double-sided) discs. This drive also reads Type II (removable from cartridge) DVD-RAM discs at DVD-ROM speeds. System boot and install functions are supported with CD-ROM and DVD-RAM media.

Characteristics:

  • Media Data Transfer Rate: CD-ROM=3600 KB/sec (max): DVD-ROM=10.3MB/sec (max)
  • Interface: IDE/ATAPI
  • Avg. Random Access Time: CD-ROM=95ms(typical); DVD-ROM=150ms(typical)
  • Buffer Memory: 256KB
  • Media capacity: CD-ROM=650MB; DVD-ROM= 4.7 GB(single sided); 9.4 GB(double-sided)
  • Multisession capable (Reads CD/R & CD-R/W media)
  • 12.7mm Slimline form factor
  • Operates in either vertical or horizontal positions
  • Interface supports standard and extended XA formats
  • Loading tray supports 12cm and 8cm disks

Limitations:

  • DVD video is not supported.
  • DVD-ROM only reads CD-type formatted media with AIX 5.1.
  • Attributes provided: 8X/24X(max) IDE DVD-ROM Drive
  • Attributes required: 1 Slimline media bay
  • For 9111-285: (#1994)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#1997) - 200/400GB Half High Ultrium 2 Tape Drive

(No Longer Available as of November 27, 2009)

The IBM 200/400GB Half High Ultrium 2 Tape Drive is a 5.25-inch, half- high, Low Voltage Differential(LVD) 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses IBM Ultrium 1 and Ultrium 2 data cartridges and is compression capable, providing a typical capacity of up to 400GB.

Characteristics:

  • Capacity: 200 GB native and typical 400 GB capacity with 2:1 compression.
  • Form Factor: 5.25-inch half high
  • Media: Half High Ultrium 2 Tape Drive supports Ultrium 1 and Ultrium 2 data cartridges.
  • Operation: Streaming
  • Data Transfer Rate: 24MBps native mode, 48MBps with 2:1 compression.
  • The IBM 200/400GB Half High Ultrium 2 Tape Drives can read and write original LTO Ultrium Data Cartridges at original Ultrium 1 capacities at up to 16 MB/sec native(32 MB/sec with 2:1 compression).
  • Interface: SCSI Ultra-160,LVD Ultra-80, and Single-ended SCSI
  • Compatibility: Ultrium 1 (Read/Write), Ultrium 2 (Read/Write)
  • Attributes provided: Ultrium 1 and Ultrium 2 tape capability
  • Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal LVD 16-bit address
  • For 9111-285: (#1997)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: No
    • Return parts MES: No

Note: We recommend that you do not install server in an office environment. Run tape backup during off-hours.

(#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable

(No Longer Available as of June 23, 2006)

  • Attributes provided: Attachment of multiple hosts to the PCI SCSI-2 differential adapter
  • Attributes required: 1 external SCSI-2 Fast/Wide Port
  • For 9111-285: (#2114)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2118) Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M

(No Longer Available as of June 23, 2006)

0.3M 16-bit SCSI cable used to convert from a Mini-68 pin VHDCI connector to a 68-pin P style connector. Cable has male Mini-68 pin VHDCI connector on one end and a female 68 pin P style connector on the other. Length = 0.3 meters.

  • Attributes provided: Attachment of supported external sub-system to integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector.
  • Attributes required: None
  • For 9111-285: (#2118)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2424) 0.6M 16-bit SCSI-2 System to System Cable

This cable provides a 16-bit connection between any two differential or single ended SCSI devices having 68-pin connectors. It can be used to attach an external SCSI device to a SCSI adapter card in an RS/6000 system.

  • Attributes provided: 0.6 meter SCSI cable with 68-pin connectors at each end
  • Attributes required: 68-pin SCSI Interface
  • For 9111-285: (#2424)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: 0)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#2425) 2.5M 16-bit SCSI-2 System-to-System Cable

(No Longer Available as of June 23, 2006)

This cable provides a 16-bit connection between any two differential or single ended SCSI devices having 68-pin connectors. It can be used to attach an external SCSI device to a SCSI adapter card in an RS/6000 system.

  • Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at each end
  • Attributes required: 68-pin SCSI Interface
  • For 9111-285: (#2425)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2456) LC-SC 50 Micron Fiber Converter Cable

The 50 micron fiber cable is used to convert from LC type to SC type connectors. The 2 meter cable has a male LC type connector on one end and a female SC type connector on the other.

  • Attributes provided: Attachment to external 50 micron fabric or device with one type fiber connector to an adapter with the other type fiber connector.
  • Attributes required: None
  • For 9111-285: (#2456)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2459) LC-SC 62.5 Micron Fiber Converter Cable

The 62.5 micron fiber cable is used to convert from LC type to SC type connectors. The 2 meter cable has a male LC type connector on one end and a female SC type connector on the other.

  • Attributes provided: Attachment to external 62.5 micron fabric or device with one type fiber connector to an adapter with the other type fiber connector.
  • Attributes required: None
  • For 9111-285: (#2459)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2591) External USB 1.44 MB Diskette Drive

(No Longer Available as of August 28, 2009)

The externally attached USB diskette drive provides storage capacity up to 1.44 MB on a high density (2HD) floppy disk and 720 KB on a double density floppy disk. Includes 350mm (13.7 in) captured cable with standard USB connector.

Limitation:

  • Maximum 1 USB diskette per adapter,
  • Up to 1 Keyboard and Mouse also supported on the adapter with the diskette drive at the same time
  • No system boot capability
  • Not to be operated upside down or with eject button down

Characteristics:

  • Capacity - 1.44 MB (2HD disk) or 720 KB (double density disk)
  • Physical Dimensions: Width=103mm (4.05 in), Height=17.6mm (.69 in), Depth=141.8mm (5.58 in)
  • Color: Black
  • Data Rate: 12 Mbits/sec
  • Max Power Consumption: 2.36 Watt (seek)
  • Operates in all positions except those noted in the limitations above
  • Attributes provided: External diskette drive
  • Attributes required: 1 available USB port
  • For 9111-285: (#2591)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2640) IDE Slimline DVD-ROM Drive

The 8X/24X(max) Slimline IDE DVD-ROM Drive is an internal tray loading DVD-ROM drive providing up to 3600KB/sec (CD-ROM) and 10.3MB/sec (DVD-ROM) data transfer rates. It is a 12.7mm Slimline form factor multi-session capable, DVD-ROM drive which provides state of the art performance and supports existing 650MB CD-ROM, 4.7 GB DVD-ROM, and 9.4 GB DVD-ROM (double-sided) discs. This drive also reads Type II (removable from cartridge) DVD-RAM discs at DVD-ROM speeds. System boot and install functions are supported with CD-ROM and DVD-RAM media.

Characteristics:

  • Media Data Transfer Rate: CD-ROM=3600 KB/sec (max): DVD-ROM=10.3MB/sec (max)
  • Interface: IDE/ATAPI
  • Avg. Random Access Time: CD-ROM=95ms(typical); DVD-ROM=150ms(typical)
  • Buffer Memory: 256KB
  • Media capacity: CD-ROM=650MB; DVD-ROM= 4.7 GB(single sided); 9.4 GB(double-sided)
  • Multisession capable (Reads CD/R & CD-R/W media)
  • 12.7mm Slimline form factor
  • Operates in either vertical or horizontal positions
  • Interface supports standard and extended XA formats
  • Loading tray supports 12cm and 8cm disks

Limitations:

  • DVD video is not supported.
  • DVD-ROM only reads CD-type formatted media with AIX 5.1.
  • Attributes provided: 8X/24X(max) IDE DVD-ROM Drive
  • Attributes required: 1 Slimline media bay
  • For 9111-285: (#2640)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#2738) 2-Port USB PCI Adapter

(No Longer Available as of November 27, 2009)

The 2 Port USB PCI Adapter is a USB 2.0 capable adapter that provides for the connection of one USB keyboard and mouse. Limitation: Limited to USB 1.1 support with AIX

  • Attributes provided: USB Keyboard/Mouse Attachment
  • Attributes required: One available PCI slot
  • For 9111-285: (#2738)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2842) POWER GXT4500P Graphics Accelerator

(No Longer Available as of January 2, 2009)

IBM POWER GXT4500P -- Entry, 3D 64-bit PCI graphics accelerator

  • Attachment via a single 64-bit or 32-bit PCI bus slot
  • Native support for OpenGL and graPHIGS 3D APIs
  • Advanced 3D texture mapping
  • Digital monitor support

The GXT4500P Graphics Accelerator is a 64-bit entry 3D PCI Graphics adapter. The graphics subsystems provide excellent functionality and performance for demanding graphics applications in:

  • Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for automotive and aerospace
  • Petroleum exploration and production
  • Scientific Visualization
  • Other technical design and visualization

This adapter has the following base features:

  • 128MB Unified Frame Buffer
    • 24 Bit Double Buffered up to 2048 x 1536
    • 24-Bit Double Buffered Stereo up to 1280 x 1024
    • 24-Bit Z-Buffer
    • 4/8 Bit Overlay
    • 8 Bit Double Buffered Alpha
    • 8 bit Stencil
    • 8 windows ID bits
    • 4 Clipping Planes
  • Scissor Registers
  • 5 HW Rectangular Clippers
  • Texture Mapping
    • up to 110MB Texture Memory (1280 x 1024)
    • Dual Texture
    • 3D texture
  • 4 Hardware Color Maps

API support - X11, graPHIGS, OpenGL 1.2

Monitor Support

  • Resolutions Supported: 8/16/24 bit (up to 2048 x 1536 @ 60Hz)
  • DDC2B support
  • ISO 9241 Compliant

Software Requirements: AIX Version 4.3.3 or 5.1, or later

The GXT4500P is packaged on a standard single-slot PCI card. The PCI interface is 64-bit, up to 66 MHz and 5.0 v or 3.3v. There are no options.

  • Attributes provided: 3D Graphics
  • Attributes required: 1 long PCI 32 or 64-bit slot, 5.0v or 3.3v
  • For 9111-285: (#2842)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2843) POWER GXT6500P Graphics Accelerator

(No Longer Available as of January 2, 2009)

IBM POWER GXT6500P -- Mid-range, 3D 64-bit PCI graphics accelerator

  • Attachment via a single 64-bit or 32-bit PCI bus slot
  • Geometry Accelerator on-board delivering highest ever IBM 3D graphics performance
  • Native support for OpenGL and graPHIGS 3D APIs
  • Advanced 3D texture mapping
  • Digital monitor support

The GXT6500P Graphics Accelerator is a 64-bit mid-range 3D PCI Graphics adapter. The graphics subsystems provide excellent functionality and performance for demanding graphics applications in:

  • Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for automotive and aerospace
  • Petroleum exploration and production
  • Scientific Visualization
  • LifeScience Visualization
  • Other technical design and visualization

This adapter has the following base features:

  • 128MB Unified Frame Buffer
    • 24 Bit Double Buffered up to 2048 x 1536
    • 24-Bit Double Buffered Stereo up to 1280 x 1024
    • 24-Bit Z-Buffer
    • 4/8 Bit Overlay
    • 8 Bit Double Buffered Alpha
    • 8 bit Stencil
    • 8 windows ID bits
    • 4 Clipping Planes
  • Texture Mapping
    • up to 110MB Texture Memory (1280 x 1024)
    • Dual Texture
    • 3D texture
  • 4 Hardware Color Maps
  • Full OpenGL, graPHIGS Geometry Accelerator

API support - X11, graPHIGS, OpenGL 1.2.1

Monitor Support

  • Resolutions Supported: 8/24 bit (up to 2048 x 1536 @ 60Hz)
  • Digital Monitor Support (up to 1600 x 1200 @ 60Hz)
  • DDC2B support
  • ISO 9241 Compliant

Software Requirements: AIX Version 4.3.3 or 5.1. or later

The GXT6500P is packaged on a standard single-slot PCI card. The PCI interface is 64-bit, up to 66 MHz and 5.0 v or 3.3v. There are no options.

  • Attributes provided: 3D Graphics
  • Attributes required: 1 long PCI 32 or 64-bit slot, 5.0v or 3.3v
  • For 9111-285: (#2843)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2849) POWER GXT135P Graphics Accelerator with Digital Support

The POWER GXT135P is a versatile, low-priced 2D graphics accelerator for RS/6000 workstations and pSeries servers. It can be configured to operate in either 8-bit or 24-bit color modes. This adapter supports both analog and digital monitors. Its predecessor, Feature Number 2848, supported only analog monitors.

  • Hardware Description
    • 128-bit graphics processor
    • 8-bit CLUT or 24-bit true color
    • 16 MB SDRAM
    • 32-bit PCI interface
    • Universal PCI (5.0v or 3.3v)
    • 1 hardware color map
  • Features Supported
    • Up to approximately 16.7 million colors
    • Rectangular clipping
    • 2 analog monitor outputs at up to 1280 x 1024 resolution
    • 1 analog monitor output at up to 2048 x 1536 resolution
    • 1 digital monitor output at up to 1600 x 1200 resolution
    • 60 to 85 Hz refresh rates (ISO 9241, Part 3)
  • APIs Supported
    • X-Windows and Motif
    • UMS 2.3.0 (no hardware scaling)
  • Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital support),or later, or AIX 4.3 (analog support only)
  • Attributes provided: 2D Graphics
  • Attributes required: 1 PCI slot
  • For 9111-285: (#2849)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#2861) ARTIC960Hx 4-Port EIA-232 Cable

(No Longer Available as of August 25, 2006)

  • Attributes provided: 4-port EIA-232 cable for (#2947)
  • Attributes required: One #2947 adapter
  • For 9111-285: (#2861)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2863) ARTIC960Hx 4-Port X.21 Cable

(No Longer Available as of August 25, 2006)

  • Attributes provided: 4-port X.21 cable for (#2947)
  • Attributes required: One #2947 adapter
  • For 9111-285: (#2863)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable

(No Longer Available as of August 25, 2006)

  • Attributes provided: 4-port X.35 (DTE) cable for (#2947)
  • Attributes required: One #2947 adapter
  • For 9111-285: (#2864)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2934) Asynchronous Terminal/Printer Cable EIA-232

The Asynchronous Printer/Terminal Cable is used for attaching printers, plotters, and terminals that support the EIA-232 standard to any asynchronous adapter. This cable is the equivalent of the combination of FC 2936 (modem cable) and FC 2937 (printer/terminal interposer) and replaces this method of printer/terminal attachment.

This cable is 3m (9.8 feet) long, uses DB25 connectors and is supported on all RS/6000 systems using any asynchronous ports. It is used in conjunction with:

  • FC 2931 (8-port Async Adapter EIA232, ISA bus)
  • FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136)
  • Attributes provided: EIA232 device attachment capability
  • Attributes required: Any RS/6000 Asynchronous port
  • For 9111-285: (#2934)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2936) Asynchronous Cable EIA-232/V.24

Used to attach a modem to the standard I/O ports with the 10-pin to 25-pin converter cable (#3925), 8-port Cable Assembly, 16-Port Cable Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to DB-25 Converter Cable feature #6402) or the 16-Port EIA-232 Remote Async Node (with RJ45 to DB25 Converter Cable feature #8133). The cable is 3 meters (9.8 feet) in length.

  • Attributes provided: Modem attachment to async or serial port
  • Attributes required: Async or serial port
  • For 9111-285: (#2936)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus

(No Longer Available as of November 27, 2009)

For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All eight ports are software programmable to support either EIA-232E or RS-422A protocols, at up to 230K baud.

  • Attributes provided: 8 Async ports
  • Attributes required: One PCI slot
  • For 9111-285: (#2943)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2944) 128-Port Asynchronous Controller, PCI bus

The 128-Port Async Adapter subsystem provides attachment for a high concentration of asynchronous lines (up to 128) from a single PCI bus slot. This gives the system the ability to serve a large number of user of EIA-232 or RS-422 devices such as terminals, printers, and modems.

Two 2.4 Mbps synchronous channels link the adapter to a maximum of eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to each synchronous channel.

RANs can also be used with this adapter. If these RANs are connected the synchronous channel the data rate drops down to 1.2 Mbps. For the best results keep the previous and new RAN's on separate synchronous channels.

  • Attributes provided: Up to 128 Async Ports
  • Attributes required: One PCI slot, One to eight (#8137) or (#8138)
  • For 9111-285: (#2944)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter

(No Longer Available as of October 13, 2006)

The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one- slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of: EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of up 2.0M bps. Software support is provided by ARTIC960 Support for AIX, Developer's Kit, AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that provide AIXLink X.25 LPP Version 1.1.5 support.

Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements.

http://www.ibm.com/servers/aix/os/adapters/51.html

  • Attributes provided: One to four WAN connections at up to 2.0Mbps
  • Attributes required: One full length 32-bit PCI slot, AIX Version 4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5, 4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support).
  • For 9111-285: (#2947)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#2951) Cable, V.24 / EIA-232

(No Longer Available as of May 31, 2006)

V.24 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962.

  • Attributes provided: V.24 Cable
  • Attributes required: #2962 Adapter
  • For 9111-285: (#2951)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: 0)
    • OS level required:
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#2952) Cable, V.35

(No Longer Available as of May 31, 2006)

V.35 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962.

  • Attributes provided: V.35 Cable
  • Attributes required: #2962 Adapter
  • For 9111-285: (#2952)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: 0)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#2953) Cable, V.36 / EIA-499

(No Longer Available as of May 31, 2006)

V.36/EIA-499 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962.

  • Attributes provided: V.36 Cable
  • Attributes required: #2962 Adapter
  • For 9111-285: (#2953)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: 0)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#2954) Cable, X.21

(No Longer Available as of May 31, 2006)

X.21 cable for use with #2962 - 2-Port Multiprotocol Adapter. Maximum of two cables per #2962.

  • Attributes provided: X.21 Cable
  • Attributes required: #2962 Adapter
  • For 9111-285: (#2954)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: 0)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#2962) 2-Port Multiprotocol PCI Adapter

(No Longer Available as of May 31, 2006)

This adapter provides high-speed connections between stand-alone system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI Adapter connects via external communications equipment including Channel Service Units (CSU), Data Service Units (DSU), or through synchronous modems.

This adapter together with IBM AIXlink/X.25 provides a two-port connection to X.25 packet switched networks. IBM AIXlink/X.25 is a separately orderable LPP (5696-926).

2-Port Multiprotocol PCI Adapter with an appropriate cable is compatible with:

  • X.21 DCE - Using 2-Port Cable, X.21 (#2954)
    • CCITT X.21 Signalling
    • CCITT V.11 Electrical
    • CCITT X.27 Electrical
    • EIA-422-A Electrical
    • ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable
  • V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951)
    • CCITT V.24 Signalling
    • CCITT V.28 Electrical
    • CCITT X.21bis Electrical and Signalling
    • EIA-232-C Electrical and Signalling
    • ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable
  • V.35 DCE - Using 2-Port Cable, V.35 (#2952)
    • CCITT V.35 Some signals for signalling
    • CCITT V.28 Some signals for electrical and signalling
    • ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable
  • V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953)
    • CCITT V.10 Electrical
    • CCITT V.11 Electrical
  • Attributes provided: Two high speed WAN connections
  • Attributes required: One PCI slot
  • For 9111-285: (#2962)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#3124) Serial to Serial Port Cable for Drawer/Drawer

This 3.7 meter cable is available to provide a null-modem connection between the serial ports of two system drawers that are mounted within the same rack. The cable provides a DB25 female connector at each end.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#3124)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3125) Serial-to-Serial Port Cable for Rack/Rack

This 8 meter cable is available to provide a null-modem connection between the serial ports of two system drawers that are mounted in separate racks. The cable provides a DB25 female connector at each end.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#3125)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3274) 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

The 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 4.82 ms (based on four (4) READS to one (1) WRITE)
  • Average Latency: 2.99 ms
  • Rotational Speed: 10,000 RPM
  • Maximum Data Transfer Rate: 67 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in an system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 73.4 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#3274)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#3275) 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

The 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 146.8 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 4.94 ms (based on four (4) READS to one (1) WRITE)
  • Average Latency: 2.99 ms
  • Rotational Speed: 10,000 RPM
  • Maximum Data Transfer Rate: 67 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 146.8 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#3275)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#3277) 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly

The 36.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 36.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
  • Average Latency: 2 ms
  • Rotational Speed: 15,000 RPM
  • Maximum Data Transfer Rate: 83 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 36.4 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#3277)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#3278) 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly

The 73.4 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 73.4 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
  • Average Latency: 2 ms
  • Rotational Speed: 15,000 RPM
  • Maximum Data Transfer Rate: 83 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 73.4 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#3278)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#3279) 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly

The 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 146.8 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 3.7 ms (based on four (4) READS to one (1) WRITE)
  • Average Latency: 2 ms
  • Rotational Speed: 15,000 RPM
  • Maximum Data Transfer Rate:107 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 146.8 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#3279)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#3578) 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

The 300 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300 GB of storage capacity and supports the industry standard Ultra320 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 4.9 ms (based on four (4) READS to one (1) WRITE)
  • Average Latency: 2.99 ms
  • Rotational Speed: 10,000 RPM
  • Maximum Data Transfer Rate: 88 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 300 GB of disk storage mounted in a carrier.
  • Attributes required: One disk drive bay.
  • For 9111-285: (#3578)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#3585) - 300 GB 15K RPM SCSI Disk Drive

(No Longer Available as of January 30, 2009)

The 300 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides 300 GB of storage capacity and supports the industry standard Ultra3 SCSI interface speed of up to 320 MBps.

Characteristics:

  • Form Factor: 3.5-inch, 1-inch (25 mm) high
  • Cable included: No
  • External Interface: Ultra320 SCSI (16-bit, Low Voltage Differential)
  • Attachment Industry Spec: SCSI U320
  • Average Seek Time: 3.7 ms (based on four(4) READS to one(1) WRITE)
  • Average Latency: 2 ms
  • Rotational Speed: 15,000 RPM
  • Maximum Data Transfer Rate:107 MBps

Limitation: This disk drive requires attachment to a supported Ultra320 SCSI Adapter in a system that supports an Ultra320 SCSI cable/ backplane in order for the drive to run at 320 MBps. Also, any and all other SCSI devices on the same SCSI bus must also be Ultra2, Ultra3, or Ultra320 SCSI device(s) in order for this disk drive to run at 320 MBps.

  • Attributes provided: 300 GB of disk storage
  • Attributes required: one disk drive bay
  • For 9111-285: (#3585)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: Refer to the Server System OS level requirements if attaching to native SCSI adapters or the OS level required by the attaching SCSI adapter as appropriate.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable

The P260/P275 monitor has the following general characteristics:

  • Business black color
  • 21-inch Flat Trinitron** CRT with a viewable image size of 503 mm (19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for bright, high-definition images.
  • Designed to provide reduced flicker operation at an optimum addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.

Note: The P260 and P275 monitors are functionally equivalent.

  • Attributes provided: Color Monitor
  • Attributes required: Graphics Adapter
  • For 9111-285: (#3628)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#3636) L200P Flat Panel Monitor

(No Longer Available as of June 16, 2006)

The L200p flat-panel monitor has the following general characteristics:

  • Business black color
  • 20.1-inch TFT LCD digital screen with a viewable image size of 510 mm (20.1 inches) measured diagonally, incorporating a 0.255 mm pixel pitch/type for bright, high-definition images.
  • Designed to provide flicker free operation at a maximum resolution of 1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in digital mode.
  • Tilt/swivel stand
  • Attributes provided: Color Flat-panel Monitor
  • Attributes required: Graphics Adapter
  • For 9111-285: (#3636)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3637) IBM T541H /L150p 15" TFT Color Monitor

(No Longer Available as of June 16, 2006)

Both the T541H and L150p monitors have the following general characteristics:

  • Business Black color
  • 15-inch TFT LCD digital screen with a viewable image size of 381 mm (15.0 inches) measured diagonally, incorporating a 0.297 mm pixel pitch/type for bright, high-definition images.
  • Designed to provide flicker free operation at a maximum resolution of 1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in digital mode.
  • Tilt/swivel stand
  • Supports 2D Graphics Adapters only
  • Attributes provided: Color Flat-panel Monitor
  • Attributes required: 2D Graphics Adapter
  • For 9111-285: (#3637)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3638) IBM C220p 21-inch Color Monitor, Business Black, and Cable

The IBM C220p monitor has the following general characteristics:

  • Business black color
  • 21.0-inch Flat Aperture Grille CRT with a viewable image size of 508 mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel pitch for bright, high-definition images.
  • Designed to provide reduced flicker operation at an optimum and maximum supported addressability of 1600 x 1200 pels at up to 85 Hz (Vesa) non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).
  • Tilt/swivel stand
  • Dual input allows attachment to two systems concurrently.
  • Depth: 483.6 mm (19.0 in.)
  • Height: 516.4 mm (20.3 in.)
  • Width: 512.8 mm (20.2 in.)
  • Weight: 30.5 kg (67.2 lbs.)
  • Attributes provided: Color Monitor
  • Attributes required: Graphics Adapter
  • For 9111-285: (#3638)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#3639) IBM ThinkVision L170p Flat Panel Monitor

The IBM ThinkVision L170p LCD flat-panel monitor has the following general characteristics:

  • Business black color
  • 17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm pixel pitch/type for bright, high-definition images.
  • Maximum resolution of 1280 x 1024.
  • Tilt/swivel and height adjustable stand
  • Analog or digital connection
  • Dual input allows attachment to two systems concurrently.
  • Internal power
  • Depth: 237.0 mm (9.3 in.)
  • Height: 457.0 mm (18.0 in.)
  • Width: 400.0 mm (15.7 in.)
  • Weight: 5.7 kg (12.6 lbs.)
  • Viewing angle: Vertical 170 degrees; horizontal 170 degrees
  • Contrast ratio: 500:1 (typical)
  • Video inputs: 15-pin D / DVI-D
  • Two removable cables: one analog and one digital
  • Attributes provided: Color Flat-panel Monitor
  • Attributes required: Graphics Adapter
  • For 9111-285: (#3639)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#3640) ThinkVision L171p Flat Panel Monitor

(No Longer Available as of June 16, 2006)

The ThinkVision L171p LCD flat-panel monitor has the following general characteristics:

  • Business black color
  • 17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.280mm pixel pitch/type for bright, high-definition images.
  • Maximum resolution of 1280 x 1024.
  • Tilt/swivel and height adjustable stand
  • Analog or digital connection
  • Dual input allows attachment to two systems concurrently.
  • Internal power
  • Depth: 237.0 mm (9.3 in.)
  • Height: 457.0 mm (18.0 in.)
  • Width: 400.0 mm (15.7 in.)
  • Weight: 5.7 kg (12.6 lbs.)
  • Viewing angle: Vertical 170 degrees; horizontal 170 degrees
  • Contrast ratio: 800:1 (typical)
  • Video inputs: 15-pin D / DVI-D
  • Two removable cables: one analog and one digital
  • RoHS compliant
  • Attributes provided: Color Flat-panel Monitor
  • Attributes required: Graphics Adapter
  • For 9111-285: (#3640)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3641) - IBM T115 Flat Panel Monitor

(No Longer Available as of September 10, 2007)

The IBM T115 LCD flat-panel monitor has the following general characteristics:

  • Business black color
  • 15.0-inch LCD digital screen with a viewable image size of 381 mm (15.0 inches) measured diagonally, incorporating a 0.297mm pixel pitch/type for bright, high-definition images.
  • Maximum resolution of 1024 x 768 (XGA)
  • Tilt adjustable stand
  • Analog connection
  • Internal power
  • Depth (w/stand): 144 mm (6.67 inches)
  • Height (max w/stand): 361 mm (14.2 inches
  • Width: 362 mm (14.2 inches)
  • Weight: 2.9 kg (6.4 lbs)
  • Contrast ratio: 400:1 (typical)
  • Brightness: 250cd/m2 (typical)
  • Viewing angles (H/V): 130 degrees/100 degrees
  • For 9111-285: (#3641)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3642) ThinkVision L191p Flat Panel Monitor

(No Longer Available as of June 16, 2006)

The ThinkVision L191p LCD flat-panel monitor has the following general characteristics:

  • Business black color
  • 19.0-inch LCD digital screen with a viewable image size of 483 mm (19.0 inches) measured diagonally, incorporating a 0.294mm pixel pitch/type for bright, high-definition images.
  • Maximum resolution of 1280 x 1024.
  • Tilt/swivel and height adjustable stand
  • Analog or digital connection
  • Dual input allows attachment to two systems concurrently.
  • Internal power
  • Depth: 237.0 mm (9.3 in.)
  • Height: 457.0 mm (18.0 in.)
  • Width: 408.0 mm (16.1 in.)
  • Weight: 7.1 kg (15.7 lbs.)
  • Contrast ratio: 1000:1 (typical)
  • Video inputs: 15-pin D / DVI-D
  • Two removable cables: one analog and one digital
  • Attributes provided: Color Flat-panel Monitor
  • Attributes required: Graphics Adapter
  • For 9111-285: (#3642)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3643) - IBM T120 Flat Panel Monitor

(No Longer Available as of January 2, 2009)

The IBM T120 LCD flat-panel monitor has the following general characteristics:

  • Business black color
  • 20.1-inch LCD digital screen with a viewable image size of 511 mm (20.1 inches) measured diagonally, incorporating a 0.255 mm pixel pitch/type for bright, high-definition images.
  • Maximum resolution of 1600 x 1200 (UXGA)
  • Tilt/lift adjustable stand
  • Analog and digital connections
  • Internal power
  • Depth (w/stand): 246 mm (9.7 inches)
  • Height (max w/stand): 416.6 mm (16.5 inches)
  • Width: 445.6 mm (17.5 inches)
  • Weight: 7.5 kg (16.5 lbs)
  • Contrast ratio: 700:1 (typical)
  • Brightness:300cd/m2 (typical)
  • Viewing angles(H/V): 178 degrees/178 degrees
  • Video inputs: 15-pin D / DVI-D
  • Two removable cables, one analog and one digital
  • Attributes provided: Color Flat-panel Monitor
  • Attributes required: Graphics Adapter
  • For 9111-285: (#3643)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3644) - IBM T119 Flat Panel Monitor

(No Longer Available as of July 31, 2009)

The IBM T119 LCD flat-panel monitor has the following general characteristics:

  • Business black color
  • 19.0-inch LCD digital screen with a viewable image size of 483 mm (19.0 inches) measured diagonally, incorporating a 0.294 mm pixel pitch/type for bright, high-definition images.
  • Maximum resolution of 1280 x 1024 (SXGA)
  • Tilt/lift adjustable stand
  • Analog and digital connections
  • Internal power
  • Depth (w/stand): 246 mm (9.7 inches)
  • Height (max w/stand): 443.6 mm (17.5 inches)
  • Width: 418 mm (16.5 inches)
  • Weight: 7.4 kg (16.3 lbs)
  • Contrast ratio: 550:1 (typical)
  • Brightness:250cd/m2 (typical)
  • Viewing angles (H/V): 140 degrees/135 degrees
  • Video inputs: 15-pin D / DVI-D
  • Two removable cables, one analog and one digital
  • Attributes provided: Color Flat-panel Monitor
  • Attributes required: Graphics Adapter
  • For 9111-285: (#3644)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3645) - IBM T117 Flat Panel Monitor

(No Longer Available as of July 31, 2009)

The IBM T117 LCD flat-panel monitor has the following general characteristics:

  • Business black color
  • 17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.264 mm pixel pitch/type for bright, high-definition images.
  • Maximum resolution of 1280 x 1024 (SXGA)
  • Tilt/lift adjustable stand
  • Analog and digital connections
  • Internal power
  • Depth (w/stand): 246 mm (9.7 inches)
  • Height (max w/stand): 395.5 mm (15.6 inches)
  • Width: 375.4 mm (14.8 inches)
  • Weight: 5.8 kg (12.8 lbs)
  • Contrast ratio: 500:1 (typical)
  • Brightness: 300cd/m2 (typical)
  • Viewing angles (H/V): 140 degrees/130 degrees
  • Video inputs: 15-pin D / DVI-D
  • Two removable cables, one analog and one digital
  • Attributes provided: Color Flat-panel Monitor
  • Attributes required: Graphics Adapter
  • For 9111-285: (#3645)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3752) Service Package

(No Longer Available as of January 7, 2011)

This kit contains publications, wrap plugs, and diagnostic CD-ROM. The "Diagnostics Information for Multiple Bus Systems" contains information common to all multiple bus system units and is used primarily for problem isolation by a customer's service specialist trained on the unit being serviced.

These publications are intended to be used in the customer's enterprise by the customer's own service specialists, and not by IBM Service personnel.

Two wrap plugs are included for use in diagnostic testing of the following connections to the system unit:

  • RS-232 serial I/O port
  • parallel I/O port

This kit also contains system diagnostic CD-ROM, along with a test diskette, for use by the customer's service specialist (not by IBM Service personnel).

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#3752)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3925) Serial Port Converter Cable, 9-Pin to 25-Pin

This cable converts the 9-pin serial port on the system to a 25-pin serial port which allows the user to attach 25-pin serial devices to the system.

  • Attributes provided: 9-Pin to 25-Pin connectivity
  • Attributes required: None
  • For 9111-285: (#3925)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3926) Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M

(No Longer Available as of July 29, 2011)

This 4-meter cable and transposer (2 parts) allows external async devices such as printers or terminals to be attached directly to the 9-pin serial port. This is equivalent to using #3925 in combination with #2934.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#3926)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 3)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#3927) Serial Port Null Modem Cable, 9-pin to 9-pin, 3.7M

This 3.7 meter 9 pin to 9 pin Null modem Serial cable allows two EIA-232 communications ports to exchange data with one another without going through a modem.

  • Attributes provided: 9 pin female connector at each end of the cable
  • For 9111-285: (#3927)
    • Minimum required: 0
    • Maximum allowed: 99 (Initial order maximum: 99)
    • OS level required: n/a
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: Does not apply
(#3928) Serial Port Null Modem Cable, 9-pin to 9-pin, 10M

This 10 meter 9 pin to 9 pin Null Modem Serial cable allows two EIA-232 communications ports to exchange data with one another without going through a modem.

  • Attributes provided: 9 pin female connector at each end of the cable
  • For 9111-285: (#3928)
    • Minimum required: 0
    • Maximum allowed: 99 (Initial order maximum: 99)
    • OS level required: n/a
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: Does not apply
(#4242) 6-Foot Extender Cable for Displays (15-pin D-shell to 15-pin D-shell)

(No Longer Available as of March 31, 2018)

This cable is required to connect displays with a 15-pin "D" shell connector to the appropriate accelerator connector when it is farther away than the attached monitor cable can reach. Rack mounted systems are likely candidates for this extender cable.

  • Attributes provided: 6-foot extension cable
  • Attributes required: Supported monitor and adapter with a 15-pin "D" shell connector.
  • For 9111-285: (#4242)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#4256) Extender Cable - USB Keyboards, 2M

This feature provides a 2M extension cable for use with USB keyboards.

  • Attributes provided: 2M Extension Cable
  • Attributes required: USB Keyboard
  • For 9111-285: (#4256)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#4267) SCSI Cable, PCI Adapter to Hot-Swap Disks

SCSI cable that connects a PCI adapter to the hot swap disks.

  • Attributes provided: Connection between adapter and hot swap disk drives.
  • Attributes required: None
  • For 9111-285: (#4267)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#4275) External SCSI Port Enablement Cable

(No Longer Available as of January 4, 2010)

SCSI cable that connects one SCSI internal controller to an external port allowing attachment of external SCSI devices to the system. Installing this feature in the system will negate the usage of a second four-pack disk enclosure.

  • Attributes provided: External SCSI port
  • Attributes required: One internal SCSI controller
  • For 9111-285: (#4275)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#4278) SCSI Cables (Power and Logic), PCI Riser to SCSI LVD Media Device; Mounting Tray

(No Longer Available as of January 4, 2010)

This feature number provides a SCSI LVD logic and power cable that connects the SCSI controller on the system planar to the SCSI media bay. Required when installing a SCSI LVD device in the SCSI media bay. Also includes a mounting tray for the SCSI LVD media device.

  • Attributes provided: Connection between SCSI controller and the SCSI media bay Mounting tray.
  • Attributes required: SCSI LVD device in SCSI media bay.
  • For 9111-285: (#4278)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: No
    • Return parts MES: No
(#4959) IBM Token-Ring PCI Adapter

The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short, 32-bit, PCI adapter supporting 4 or 16 Mbps data rates, either half- duplex or full-duplex.

Automatic Ring-Speed selection prevents "wrong speed" insertion into the ring, even when connected to speed-sensing hubs. This adapter will operate with either unshielded twisted pair (UTP) Cat 5 cable with RJ-45 connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin D-shell connectors. The Token-Ring PCI Adapter will provide network boot capability.

  • Attributes provided:
  • Attributes required: A single empty 32-bit PCI adapter slot.
  • For 9111-285: (#4959)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#4962) 10/100 Mbps Ethernet PCI Adapter II

The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single port PCI ethernet adapter. This high performance, low power ethernet 10/100Mbps LAN adapter can be used in both client and server PCI systems. The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and 100Base-TX full duplex ethernet LAN connectivity. The adapter supports Category-5 unshielded twisted pair cabling for both 10/100 Mbps and Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps Ethernet PCI Adapter II supports:

  • Half / Full Duplex 10/100 Mbps Ethernet interface
  • 10/100 Mbps data rates
  • Auto-negotiation for 10/100 speed and half/full duplex
  • Network boot capability and Network Install Manager (NIM)
  • IEEE 802.3 Ethernet Specification
  • IEEE 802.3u Fast Ethernet Specification

After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the off-load of IP Security cryptographic algorithms by providing hardware assistance in performing data encryption and authentication. This support is provided with AIX 5.1 (with appropriate software updates)and later software. This IP Security function, normally performed with encryption software by the host, is off-loaded to this adapter to enhance network traffic throughput and reduce CPU utilization. If you are running with AIX 5.1, to invoke the IP Security function on the adapter, you must obtain AIX 5.1 software updates IY27069 and IY26514 or the 5100-02 Recommended Maintenance package. These updates can be obtained by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD (LCD4-1103-03) dated 4/2002 or later.

Note: This IP Security function is not supported with AIX 4.3 software.

An additional function called 'Large Send' or sometimes known as TCP Segmentation is also available. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also available. Both these functions are available with AIX version 5.1 with APAR IY38248 or later software, or AIX version 5.2 with APAR IY38492 or later software.

  • Attributes provided: One 10/100 Mbps Ethernet port (connector)
  • Attributes required: One PCI slot
  • For 9111-285: (#4962)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5001) Custom Service Specify

(No Longer Available as of November 27, 2009)

This feature code specifies that the system will receive special request services from the Customer Solution Center (CSC).

  • Attributes provided: Customization
  • Attributes required: None
  • For 9111-285: (#5001)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#5005) Software Preinstall

(No Longer Available in Latin America as of March 01, 2006)

Licensed programs may be preinstalled on the media selected. To order this option, specify code (#5005) on the initial system order. The preinstalled licensed programs will be at the same release level as programs being shipped from the Program Libraries at the time the system is manufactured.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#5005)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#5170) Power Supply, 700 Watt AC

(No Longer Available as of January 4, 2010)

This feature provides a 700 Watt AC power supply.

  • Attributes provided:700 Watt AC power supply
  • Attributes required: None
  • For 9111-285: (#5170)
    • Minimum required: 1
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#5326) - 1-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache

(No Longer Available as of January 2, 2009)

1-core processor card with 2.1 GHz POWER5+ processor and 36MB of L3 cache. Attached to planar.

  • Attributes provided: 1-core processor card, 36MB L3 cache.
  • Attributes required: None
  • For 9111-285: (#5326)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1 )
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#5327) - 2-core 2.1 GHz POWER5+ Processor Card, 36MB L3 Cache

(No Longer Available as of January 2, 2009)

2-core processor card with 2.1 GHz POWER5+ processor and 36MB of L3 cache. Attached to planar.

  • Attributes provided: 2-core processor card, 36MB L3 cache.
  • Attributes required: None
  • For 9111-285: (#5327)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1 )
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#5700) IBM Gigabit Ethernet-SX PCI-X Adapter

The IBM Gigabit Ethernet-SX PCI-X Adapter provides a 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connection with throughput on a standard shortwave multimode optical cable which conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter.

Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot.

Note: The IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required.

Limitation: Half Duplex (HDX) mode is not supported.

  • Attributes provided: One full-duplex 1000Base-SX fiber connection to a Gigabit Ethernet LAN.
  • Attributes required: One available PCI or PCI-X card slot
  • For 9111-285: (#5700)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter

The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via the PCI-X bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed.

Note: For optimum performance, adapter should be placed in a 64 bit PCI-X card slot.

Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode.

  • Attributes provided: One full-duplex 10/100/1000Base-TX UTP connection to a Gigabit Ethernet LAN.
  • Attributes required: One available PCI or PCI-X card slot
  • For 9111-285: (#5701)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5703) PCI-X Dual Channel Ultra320 SCSI RAID Adapter

The PCI-X Dual Channel Ultra320 SCSI RAID Adapter (#5703) is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing RAID 0,5, or 10 capability and can address up to thirty 16-bit SCSI physical disk drives on two independent SCSI buses.

To increase the data writing performance, a 40 MByte non-volatile fast-write cache is provided as a resident part of this adapter. The 40 MByte fast-write cache can provide a significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.

The Dual Channel Ultra320 SCSI RAID Adapter has two independent ultra320 SCSI buses. There are two internal ports and two external ports. The two internal ports are shared with the two external ports. The SCSI busses can drive either an internal port or an external port. The internal ports can be used to provide an internal RAID solution on certain supporting pSeries systems with internal multiple disk drives or packs of drives. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds.

In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device.

When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array (attached to either the internal or external ports) are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrity. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors.

Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following Web page URL:

http://techsupport.services.ibm.com/server/mdownload/

Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI RAID Adapter.

The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate configured as either a non-array or an array of disks Also the two external ports provide non-array connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter.

Limitations:

  • The two external ports provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate as well as connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate, but is limited to only non-array configuration support.
  • The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105.
  • Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.
  • Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following Web page URL:
    http://techsupport.services.ibm.com/server/mdownload/
  • Attributes provided: Attachment of internal and external SCSI devices
  • Attributes required: One PCI or PCI-X bus slot
  • For 9111-285: (#5703)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5706) IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter

The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full Duplex, dual ported, Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run each port at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via a PCI or PCI-X bus and connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed.

A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided.

The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5701) is the preferred solution.

Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible.

Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode.

  • Attributes provided: Two full-duplex 10/100/1000Base-TX UTP connections to Gigabit Ethernet LAN(s).
  • Attributes required: One available PCI or PCI-X card slot
  • For 9111-285: (#5706)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5707) IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter

The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter provides two 1 Gbps (1000 Base-SX) full-duplex Ethernet LAN connections with throughput on a standard shortwave multimode optical cable that conforms to the IEEE 802.3z standard. The adapter supports distances of 260m for 62.5 micron Multi Mode Fiber (MMF) and 550m for 50.0 micron MMF. AIX Network Install Manager (NIM) boot capability is supported with this adapter.

A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also provided.

The IBM 2-Port Gigabit Ethernet-SX PCI-X Adapter (#5707) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, refer to the RS/6000 & pSeries PCI Adapter Placement Reference SA38-0538. If card slots are not the limiting factor and maximum throughput is required, the single port IBM Gigabit Ethernet-SX PCI-X Adapter (#5700) is the preferred solution.

Note: For optimum performance, the adapter should be placed in a 64 bit PCI-X card slot whenever possible.

Note: The 2-Port IBM Gigabit Ethernet-SX PCI-X Adapter incorporates an LC type connector on the card. This new, smaller form factor connector is being used by the industry for the next generation of fiber optic networks. If connecting into an older, existing SC type connector network, an LC-SC 62.5 Micron Fiber Converter Cable (#2459) or LC-SC 50 Micron Fiber Converter Cable (#2456) is required.

Limitation: Half Duplex (HDX) mode is not supported.

  • Attributes provided: Two full-duplex 1000Base-SX fiber connections to a Gigabit Ethernet LAN(s).
  • Attributes required: One available PCI or PCI-X card slot
  • For 9111-285: (#5707)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5709) Dual Channel SCSI RAID Enablement Card

The Dual Channel SCSI RAID Enablement Card (#5709) is a bootable high performance SCSI RAID Enablement feature providing RAID 0,5, or 10 capability to select pSeries systems with the appropriate supporting integrated SCSI adapter and internal multiple disk drives or packs of drives.

To increase the data writing performance, a 16 MByte non-volatile fast-write cache is provided as a resident part of this feature. The 16 MByte fast-write cache can provide an improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.

When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrity. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors.

Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following Web page URL:

http://techsupport.services.ibm.com/server/mdownload/

Limitations:

  • Even though the supporting integrated adapter with the Dual Channel SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.
  • Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following Web page URL:
    http://techsupport.services.ibm.com/server/mdownload/
  • Attributes provided: Internal disk drives to be configured as an array.
  • Attributes required: Systems with supporting integrated SCSI adapter.
  • For 9111-285: (#5709)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5712) PCI-X Dual Channel Ultra320 SCSI Adapter

The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a 64-bit 3.3 volt adapter and is an excellent solution for high-performance SCSI applications. The PCI-X Dual Channel Ultra320 SCSI Adapter provides two SCSI channels (busses), each capable of running 320 MBps (max.), up to twice the maximum data transfer rate of the previous Dual Channel Ultra3 SCSI adapter (160 MBps). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds.

In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device.

Two industry standard VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X Dual Channel Ultra320 SCSI Adapter.

The two external ports provide connectivity to an IBM 2104-DS4 Expandable Storage Plus Drawer or 2104-TS4 Expandable Storage Plus Tower at up to 320 MB/s SCSI bus data rate. The two external ports also provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate and to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. Also the two external ports provide connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter.

The PCI-X Dual Channel Ultra320 SCSI Adapter (#5712) is a native boot adapter with AIX 5.1 or AIX 5.2 software in a supported pSeries or RS/6000 systems. The adapter also supports target mode.

Limitations:

  • The two external ports do not support the connection to the IBM 7131-105 IBM Multi-Storage Tower Model 105.
  • Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.
  • Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following Web page URL:
    http://techsupport.services.ibm.com/server/mdownload/
  • Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices
  • Attributes required: One available 3.3 volt PCI or PCI-X slot
  • For 9111-285: (#5712)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5713) 1 Gigabit iSCSI TOE PCI-X on Copper Media Adapter

The 1 Gigabit iSCSI TOE PCI-X adapter encapsulates SCSI Commands and data into TCP and transports them over the Ethernet via IP packets. The adapter operates as an iSCSI TOE (TCP/IP Offload Engine). This offload function eliminates host protocol processing and reduces CPU interrupts. Adapter uses RJ45 Gigabit Ethernet connector.

  • Attributes provided: Offload of host protocol processing
  • Attributes required: Available PCI-X Slot
  • For 9111-285: (#5713)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later. Refer to the following URL for systems and features that operate with Linux:
      http://www.ibm.com/servers/eserver/pseries/hardware/
      factsfeatures.html
       
      
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply

    Note: Max 15 per system.

(#5714) 1 Gigabit iSCSI TOE PCI-X on Optical Media Adapter

The 1 Gigabit iSCSI TOE PCI-X adapter encapsulates SCSI Commands and data into TCP and transports them over the Ethernet via IP packets. The adapter operates as an iSCSI TOE (TCP/IP Offload Engine). This offload function eliminates host protocol processing and reduces CPU interrupts. Adapter uses Small form factor LC type fiber optic connector.

  • Attributes provided: Offload of host protocol processing
  • Attributes required: Available PCI-X Slot
  • For 9111-285: (#5714)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later. Refer to the following URL for systems and features that operate with Linux:
      http://www.ibm.com/servers/eserver/pseries/hardware/
      factsfeatures.html
       
      
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply

    Note: Max 15 per system

(#5716) 2 Gigabit Fibre Channel PCI-X Adapter

The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of which the device or switch is capable. Distances of up to 500 meters running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gps or 2 Gps data rates.

The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.

Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.

http://www.storage.ibm.com/hardsoft/disk/products.htm

Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.

  • Attributes provided: 1 Fibre Channel/FC-AL interface
  • Attributes required: 1 empty PCI or PCI-X slot
  • For 9111-285: (#5716)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5718) 10 Gigabit Ethernet -SR PCI-X Adapter

Provides 10 Gigabit Ethernet PCI-X based server connections. Supports distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um multimode fiber with 2000MHz km minimum model bandwidth at 850 nm. Adapter connector type is LC.

  • Attributes provided: Provides highend bandwidth for networking
  • Attributes required: Supported on PCI-X slots only
  • For 9111-285: (#5718)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5719) IBM 10 Gigabit Ethernet-LR PCI-X Adapter

Offers 10 Gigabit Ethernet PCI-X based server connections over a maximum of 10 kilometers of 1310nm single-mode fiber optic cable. The adapter conforms to the IEEE 802.3ae standard. The adapter requires 9um single-mode fiber optic cables and uses a SC connector type for connecting into net-work infrastructure components like 10 Gigabit Ethernet switch/router with SC connectors.

  • Attributes provided: 10 Gigabit Ethernet connections
  • Attributes required: Available PCI-X slot
  • For 9111-285: (#5719)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5721) - 10 Gb Ethernet-SR PCI-X 2.0 DDR Adapter

(No Longer Available as of November 27, 2009)

The adapter supports distances of up to 33m using 62.5 um multimode fiber or 300m using 50 um multimode fiber with 2000 MHz*km minimum model bandwidth at 850 nm wavelength. The fiber cable connects to the adapter with LC type connector. The adapter conforms to the IEEE 802.3ae standard.

  • Attributes provided: Provides high-end bandwidth for networking
  • Attributes required: PCI-X slot or for improved bandwidth plug into PCI-X 2.0 DDR slot.
  • For 9111-285: (#5721)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5L Version 5.2 with the 5200-08 Technology Level (APAR IY77270) plus APAR IY83444 and IY84022, or later Technology Level. AIX 5L Version 5.3 with the 5300-04 Technology Level (APAR IY77273) plus APAR IY83424 and IY84026, or later Technology Level. SUSE Linux Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS 4 for POWER, or later. Refer to the following URL for systems and features that operate with Linux:
              http://www.ibm.com/servers/eserver/pseries/
              hardware/factsfeatures.html
       
      
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No

    Note: The minimum system firmware level required to operate in Double Data Rate (DDR) mode is SF240_205.

    System firmware can be downloaded from:

    http://techsupport.services.ibm.com/server/mdownload2 /download.html

    Note: The combined cumulative total for feature 5721 and 5722 is 1.

(#5722) - 10 Gb Ethernet-LR PCI-X 2.0 DDR Adapter

(No Longer Available as of November 28, 2008)

The adapter supports a maximum of 10 kilometers of 1310nm 9um single- mode fiber optic cable. The adapter conforms to the IEEE 802.3ae standard. The adapter requires 9um single-mode fiber optic cables and uses a SC connector to facilitate connecting into network infrastructure components like 10 Gigabit Ethernet switch/router with SC connectors.

  • Attributes provided: 10 Gigabit Ethernet connections
  • Attributes required: PCI-X slot or for improved bandwidth plug in PCI-X 2.0 DDR slot.
  • For 9111-285: (#5722)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5L Version 5.2 with the 5200-08 Technology Level (APAR IY77270) plus APAR IY83444 and IY84022, or later Technology Level. AIX 5L Version 5.3 with the 5300-04 Technology Level (APAR IY77273) plus APAR IY83424 and IY84026, or later Technology Level. SUSE Linux Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS 4 for POWER, or later. Refer to the following URL for systems and features that operate with Linux:
              http://www.ibm.com/servers/eserver/pseries/
              hardware/factsfeatures.html
       
      
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No

    Note: The minimum system firmware level required to operate in Double Data Rate (DDR) mode is SF240_205.

    System firmware can be downloaded from:

    http://techsupport.services.ibm.com/server/mdownload2 /download.html

    Note: The combined cumulative total for feature 5721 and 5722 is 1.

(#5723) 2-Port Asynchronous EIA-232 PCI Adapter

(No Longer Available as of November 27, 2009)

Connection for 2 Asynchronous EIA-232 devices. Ports are Programmable to support EIA-232 protocols, at a line speed of 128K bps.

  • Attributes provided: 2 Asynchronous Ports
  • Attributes required: One PCI Slot
  • For 9111-285: (#5723)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5727) Dual Channel SCSI RAID Enablement Card

The Dual Channel SCSI RAID Enablement Card (#5727) is a bootable high performance SCSI RAID Enablement feature providing RAID 0,5, or 10 capability to select pSeries systems with the appropriate supporting integrated SCSI adapter and internal multiple disk drives or packs of drives.

To increase the data writing performance, a 16 MByte non-volatile fast-write cache is provided as a resident part of this feature. The 16 MByte fast-write cache can provide an improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.

When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array are required to be formatted to 522 byte sectors. 522 byte sectors provide additional CRC error checking for improved data integrity. A menu option is provided in the AIX supporting software which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512 byte sectors.

Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. Also, there are some disk drives which do not support being formatted to 522 Byte Sectors. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following Web page URL:

http://techsupport.services.ibm.com/server/mdownload/

Limitations:

  • Even though the supporting integrated adapter with the Dual Channel SCSI RAID Enablement Card has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.
  • Disk drives internal to the pSeries system shipped prior to September 1, 2003 require a disk drive microcode update to run at Ultra320 speed. To obtain the appropriate microcode update, go to the following Web page URL:
    http://techsupport.services.ibm.com/server/mdownload/
  • Attributes provided: Internal disk drives to be configured as an array.
  • Attributes required: Systems with supporting integrated SCSI adapter.
  • For 9111-285: (#5727)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5736) PCI-X DDR 2.0 Dual Channel Ultra320 SCSI Adapter

The PCI-X Dual Channel Ultra320 SCSI Adapter (#5736) is a 64-bit 3.3 volt adapter and is an excellent solution for high-performance SCSI applications. The PCI-X DDR Dual Channel Ultra320 SCSI Adapter provides two SCSI channels (busses), each capable of running 320 MBps (max.). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external. Internally attached Ultra320 devices are designed to run at a data rate of up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds.

In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this 320 MB per second performance, all attaching devices should also be Ultra320 LVD devices. But, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface to all devices on that SCSI bus at the lower SE bus data rate of the device.

Two VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68-pin, (#2118) can be used with older external SE devices or subsystems to allow connection to the VHDCI connector on the PCI-X DDR Dual Channel Ultra320 SCSI Adapter.

The two external ports provide connectivity to numerous other SCSI external subsystems. Check the external subsystem sales/web pages for verification of connectivity support with this adapter.

The PCI-X DDR Dual Channel Ultra320 SCSI Adapter (#5736) is a native boot adapter with AIX 5.3L or AIX 5.3D software in a supported pSeries or RS/6000 systems. The adapter also supports target mode.

Limitations:

  • Even though the Dual Channel Ultra320 SCSI nonRAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.
  • To obtain microcode update go to the following Web page URL:
    http://techsupport.services.ibm.com/server/mdownload/
  • Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices
  • Attributes required: One available 3.3 volt PCI or PCI-X slot or PCI-X 2.0 DDR slot.
  • For 9111-285: (#5736)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5737) PCI-X DDR Dual Channel Ultra320 SCSI RAID Adapter

The PCI-X DDR Dual Channel Ultra320 SCSI RAID LVD only Adapter (#5737) is a 64-bit 3.3 volt, bootable high performance Ultra320 SCSI RAID Adapter providing RAID 0, 5, 6, or 10 capability, and can address up to thirty 16-bit SCSI physical disk drives on two independent SCSI buses.

To increase the data writing performance, a 90 MByte non-volatile fast-write cache is a resident part of this adapter. The 90 MByte fast- write cache can provide a significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.

The Dual Channel Ultra320 SCSI RAID Adapter has two independent ultra320 SCSI buses. There are two internal ports and two external ports. The two internal ports are shared with the two external ports. The SCSI busses can drive either an internal port or an external port. The internal ports can be used to provide an internal RAID solution on certain supporting pSeries systems with internal multiple disk drives or packs of drives. Internally attached Ultra320 devices designed to run at 320 MB can run up to 320 MB per second on systems that have internal backplanes that are capable of supporting Ultra320 speeds.

In order to achieve an Ultra320 SCSI bus data rate of up to 320 MB per second and maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. All attaching devices should be Ultra320 LVD devices to utilize the 320 MB per second performance, however, if Ultra2, Ultra3, or Ultra320 devices coexist on the same bus, each device will operate at its rated speed. This card does not support single-ended (SE) devices.

When an array configuration is selected with the RAID Manager, the disk drives being designated as part of the array (attached to either the internal or the external ports) are required to be formatted to 522-byte sectors. 522-byte sectors provide additional CRC error checking for improved data integrity. A menu option provide in the AIX supporting software, which will reformat these disk drives prior to their usage in an array. Conversely, when a disk drive is removed from an array, a similar menu option is also provided to re-format them back to 512-byte sectors. Note: Some disk drives require that their microcode be updated to the latest level before being formatted to 522 Byte Sectors. In addition, there are some disk drives, which do not support 522 Byte Sectors format. The PCI-X SCSI Disk Array Manager will inform the user of these known situations when they exist. For disk microcode updates, go to the following Web page URL:

http://techsupport.services.ibm.com/server/mdownload/

Two VHDCI 68-pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD external subsystems.

Limitations:

  • Even though the Dual Channel Ultra320 SCSI RAID Adapter has ports that run at ultra320 SCSI speeds (up to 320 MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system disk backplane.

Minimum System Firmware Required:

System firmware level required is SF235_185 or greater. Firmware level SF235_185 adjusts the PCI slots to run in Single Data Rate (SDR) mode. Enablement of Double Data Rate (DDR)slots to run at DDR mode is planned to be provided in an upcoming firmware enhancement.

For Double Data Rate (DDR), check for firmware upgrade at URL:

http://techsupport.services.ibm.com/server/mdownload2 /download.html

Running the adapter on a system with firmware level lower than SF235_185 is not supported.

  • Attributes provided: Attachment of internal and external SCSI devices
  • Attributes required: One PCI or PCI-X DDR bus slot
  • For 9111-285: (#5737)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5740) 4-Port 10/100/1000 Base-TX PCI-X Adapter

The 4-Port 10/100/1000 Base -TX PCI-X adapter is a full height PCI-X 1.0a Ethernet adapter which supports four Gigabit ports on a single adapter, delivers increased bandwidth for slot-constrained servers, and is designed to provide high connectivity and reliability using two integrated, dual-port Gigabit Ethernet controllers.

  • Four RJ-45 ports
  • 3.3 volts, 64-bit 133 MHz with 64-bit Bus Mastering on the PCI-X bus
  • IEEE 802.3ab 1000Base-T compliant
  • IEEE 802.3u 100Base-T compliant
  • IEEE 802.3 10Base-T compliant
  • 802.1q VLAN tagging
  • Interrupt Moderation
  • TCP Segmentation offload and encapsulation in hardware
  • Checksum offloading of IP, TCP, and UDP frame
  • Increased connectivity while significantly reducing CPU utilization
  • Two LED adapter status indicators per port for link activity and speed
  • NIM is supported on all 4 ports
  • RoHS compliant

Limit Full bandwidth performance may not be achieved with more than one adapter per PCI Host Bridge (PHB) or more than one CPU.

  • Attributes provided: Four 10/100/1000 RJ-45 ports
  • Attributes required: One available PCI-X card slot
  • For 9111-285: (#5740)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later. SUSE Linux Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS 4 for POWER, or later. Refer to the following URL for systems and features that operate with Linux:
      http://www.ibm.com/servers/eserver/pseries/hardware/
      factsfeatures.html
       
      
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5751) IBM 4.7 GB IDE Slimline DVD-RAM Drive

The IBM 4.7 GB IDE Slimline DVD-RAM Drive is an internal tray loading, multifunction storage device capable of reading and writing 4.7GB DVD-RAM discs as well as reading a multitude of other optical media discs. This drive also reads Type II (removable from cartridge) DVD-RAM discs. It is a 12.7mm high Slimline form factor, multi-session capable, DVD-RAM drive which provides state of the art performance. System boot and install functions are supported with CD-ROM and DVD-RAM media.

Characteristics:

  • Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer diameter; 10.8MB/sec read (8X DVD-ROM); 2.7MB/sec write (2X DVD-RAM) and 2.7MB/sec read (2X DVD-RAM)
  • Interface: Parallel IDE
  • Average Random Access Time: 150ms CD-ROM; 180ms DVD-ROM; 229ms DVD-RAM
  • Buffer Memory: 2MB
  • High-speed burst rate of 16/16/33 MB/second for PIO / MDMA / UDMA transfers respectively
  • Loading tray accommodates both 8cm discs and 12cm discs.
  • Operates in either vertical or horizontal position
  • Reads multi-session discs
  • Reads CD-ROM, CD-R, CD-RW, DVD-ROM, & DVD-RAM discs.
  • Reads 2.6GB DVD-RAM media; reads and writes 4.7GB and 9.4GB double sided) DVD-RAM media
  • Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA and audio

Limitations:

  • DVD video is not supported.
  • Drive only reads CD-type formatted media with AIX 5.1.
  • Attributes provided: One 4.7GB IDE Slimline DVD-RAM Drive
  • Attributes required: One IDE 12.7mm high media bay
  • For 9111-285: (#5751)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#5755) - 200/400GB Half High Ultrium 2 Tape Drive

The IBM 200/400GB Half High Ultrium 2 Tape Drive is a 5.25-inch, half- high, Low Voltage Differential(LVD) 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses IBM Ultrium 1 and Ultrium 2 data cartridges and is compression capable, providing a typical capacity of up to 400GB.

Characteristics:

  • Capacity: 200 GB native and typical 400 GB capacity with 2:1 compression.
  • Form Factor: 5.25-inch half high
  • Media: Half High Ultrium 2 Tape Drive supports Ultrium 1 and Ultrium 2 data cartridges.
  • Operation: Streaming
  • Data Transfer Rate: 24MBps native mode, 48MBps (typical) with 2:1 compression.
  • The IBM 200/400GB Half High Ultrium 2 Tape Drives can read and write original LTO Ultrium Data Cartridges at original Ultrium 1 capacities at up to 16 MB/sec native(32 MB/sec with 2:1 compression).
  • Interface: SCSI Ultra-160,LVD Ultra-80, and Single-ended SCSI.
  • Compatibility: Ultrium 1 (Read/Write), Ultrium 2 (Read/Write).
  • Attributes provided: Ultrium 1 and Ultrium 2 tape capability
  • Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal LVD 16-bit address
  • For 9111-285: (#5755)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: No
    • Return parts MES: No

Note: We recommend that you do not install server in an office environment. Run tape backup during off-hours.

(#5758) - 4 Gb Single-Port Fibre Channel PCI-X 2.0 DDR Adapter

The 4 Gigabit Single-Port Fibre Channel PCI-X 2.0 DDR Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high-speed local and remote located storage. The 4 Gigabit Single-Port Fibre Channel PCI-X Adapter will auto-negotiate for the highest data rate between adapter and an attaching device at 1 Gbps, 2 Gbps or 4 Gbps of which the device or switch is capable. Distances of up to 500 meters running at 1 Gbps data rate, up to 300 meters running at 2 Gbps data rate, and 4 Gbps data rate up to 150 meters are supported between the adapter and an attaching device or switch. When used with IBM Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gbps, 2 Gbps, or 4 Gbps data rates.

The 4 Gigabit Single-Port Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.

There are two maximum quantities for High Bandwidth adapters, one for performance, and one for connectivity. Adapter performance may be limited by bandwidth constraints in a network. To maximize High Bandwidth adapter performance in the server the performance maximum quantity should not be exceeded. In applications where the end-to-end network cannot sustain high performance and or connectivity is more important than overall bandwidth performance the performance maximum quantity can be exceeded up to the connectivity maximum quantity.

  • Connectivity Maximum: (3)
  • Performance Maximum: (3)

Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.

http://www.ibm.com/servers/storage/product/products_p series.html

Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.

  • Attributes provided: 1 Fibre Channel
  • Attributes required: 1 empty PCI or PCI-X 1.0 / 2.0 slot
  • For 9111-285: (#5758)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 0)
    • OS level required: AIX 5L Version 5.2 with the 5200-08 Technology Level (APAR IY77270) plus APAR IY83649 and IY83172, or later Technology Level. AIX 5L Version 5.3 with the 5300-04 Technology Level (APAR IY77273) plus APAR IY83730 and IY83163, or later Technology Level. SUSE Linux Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS 4 for POWER, or later. Refer to the following URL for systems and features that operate with Linux:
             http://www.ibm.com/servers/eserver/pseries/
             hardware/factsfeatures.html
       
      
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply

    Note: The minimum system firmware level required to operate in Single Data Rate (SDR) mode is SF235_185. The minimum system firmware level required to operate in Double Data Rate (DDR) mode is SF240_205.

    System firmware can be downloaded from:

    http://techsupport.services.ibm.com/server/mdownload2 /download.html

(#5759) - 4 Gb Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter

The 4 Gigabit Dual-Port Fibre Channel PCI-X 2.0 DDR Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high-speed local and remote located storage. The adapter will auto-negotiate for the highest data rate between adapter and an attaching device at 1 Gbps, 2 Gbps, or 4 Gbps of which the device or switch is capable. Distances of up to 500 meters running at 1 Gbps data rate, up to 300 meters running at 2 Gbps data rate, and 4 Gbps data rate up to 150 meters are supported between the adapter and an attaching device or switch. When used with IBM Fibre Channel storage switches supporting long-wave optics, distances up to 10 kilometers are capable running at either 1 Gbps, 2 Gbps, or 4 Gbps data rates.

The adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.

There are two maximum quantities for High Bandwidth adapters, one for performance, and one for connectivity. Adapter performance may be limited by bandwidth constraints in a network. To maximize High Bandwidth adapter performance in the server the performance maximum quantity should not be exceeded. In applications where the end-to-end network cannot sustain high performance and or connectivity is more important than overall bandwidth performance the performance maximum quantity can be exceeded up to the connectivity maximum quantity.

  • Connectivity Maximum: (3)
  • Performance Maximum: (2)

Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.

http://www.ibm.com/servers/storage/product/products_p series.html

Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.

Note: Please carefully consider the usage of this card. If placed in a PCI-X slot rated as SDR compatible and/or has the slot speed of 133 MHz, the AIX value of the max_xfer_size must be kept at the default setting of 0x100000 (1 megabyte) when both ports are in use. The architecture of the DMA buffer for these slots does not accommodate larger max_xfer_size settings.

  • Attributes provided: 2 Fibre Channel
  • Attributes required: 1 empty PCI or PCI-X 2.0 slot
  • For 9111-285: (#5759)
    • Minimum required: 0
    • Maximum allowed: 3 (Initial order maximum: 0)
    • OS level required: AIX 5L Version 5.2 with the 5200-08 Technology Level (APAR IY77270) plus APAR IY83649 and IY83172, or later Technology Level. AIX 5L Version 5.3 with the 5300-04 Technology Level (APAR IY77273) plus APAR IY83730 and IY83163, or later Technology Level. SUSE Linux Enterprise Server 9 for POWER, or later. Red Hat Enterprise Linux AS 4 for POWER, or later. Refer to the following URL for systems and features that operate with Linux:
             http://www.ibm.com/servers/eserver/pseries/
             hardware/factsfeatures.html
       
      
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply

    Note: The minimum system firmware level required to operate in Single Data Rate (SDR) mode is SF235_185. The minimum system firmware level required to operate in Double Data Rate (DDR) mode is SF240_205.

    System firmware can be downloaded from:

    http://techsupport.services.ibm.com/server/mdownload2 /download.html

(#5951) Full Width Quiet Touch Keyboard -- USB, US English, #103P

(No Longer Available as of August 31, 2012)

This feature provides a USB attached US English #103P keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5951)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5952) Full Width Quiet Touch Keyboard -- USB, French, #189

(No Longer Available as of August 31, 2012)

This feature provides a USB attached French #189 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5952)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5953) Full Width Quiet Touch Keyboard -- USB, Italian, #142

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Italian #142 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5953)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5954) Full Width Quiet Touch Keyboard -- USB, German/Austrian, #129

(No Longer Available as of August 31, 2012)

This feature provides a USB attached German/Austrian #129 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5954)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5955) Full Width Quiet Touch Keyboard -- USB, UK English, #166P

(No Longer Available as of August 31, 2012)

This feature provides a USB attached UK English #166 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5955)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5956) Full Width Quiet Touch Keyboard -- USB, Spanish, #172

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Spanish #172 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5956)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5957) Full Width Quiet Touch Keyboard -- USB, Japanese, #194

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Japanese #194P keyboard. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5957)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5958) Full Width Quiet Touch Keyboard -- USB, Brazilian Portuguese, #275

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Brazilian Portuguese #275 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5958)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5959) Full Width Quiet Touch Keyboard -- USB, Hungarian, #208

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Hungarian #208 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5959)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5960) Full Width Quiet Touch Keyboard -- USB, Korean, #413

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Korean #413 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5960)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5961) Full Width Quiet Touch Keyboard -- USB, Chinese, #467

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Chinese #467 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5961)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5962) Full Width Quiet Touch Keyboard -- USB, French Canadian, #445

(No Longer Available as of August 31, 2012)

This feature provides a USB attached French Canadian #445 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5962)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5963) Full Width Quiet Touch Keyboard -- USB, Canadian French, #058

(No longer available as of August 29, 2008)

This feature provides a USB attached Canadian French #058 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5963)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5964) Full Width Quiet Touch Keyboard -- USB, Belgian/French, #120

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Belgian/French #120 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5964)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5965) Full Width Quiet Touch Keyboard -- USB, Swedish/Finnish, #153

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Swedish/Finnish #153 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5965)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5966) Full Width Quiet Touch Keyboard -- USB, Danish, #159

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Danish #159 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5966)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5967) Full Width Quiet Touch Keyboard -- USB, Bulgarian, #442

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Bulgarian #442 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5967)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5968) Full Width Quiet Touch Keyboard -- USB, Swiss/French/German, #150

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Swiss, French/German #150 /F/G keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5968)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5969) Full Width Quiet Touch Keyboard -- USB, Norwegian,#155

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Norwegian #155 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5969)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5970) Full Width Quiet Touch Keyboard -- USB, Dutch, #143

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Dutch #143 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5970)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5971) Full Width Quiet Touch Keyboard -- USB, Portuguese, #163

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Portuguese #163 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5971)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5972) Full Width Quiet Touch Keyboard -- USB, Greek, #319

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Greek #319 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5972)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5973) Full Width Quiet Touch Keyboard -- USB, Hebrew, #212

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Hebrew #212 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5973)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5974) Full Width Quiet Touch Keyboard -- USB, Polish, #214

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Polish #214 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5974)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5975) Full Width Quiet Touch Keyboard -- USB, Slovakian, #245

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Slovakian #245 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5975)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5976) Full Width Quiet Touch Keyboard -- USB, Czech, #243

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Czech #243 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5976)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5977) Full Width Quiet Touch Keyboard -- USB, Turkish, #179

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Turkish #179 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5977)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5978) Full Width Quiet Touch Keyboard -- USB, LA Spanish, #171

(No Longer Available as of August 31, 2012)

This feature provides a USB attached LA Spanish #171 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5978)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5979) Full Width Quiet Touch Keyboard -- USB, Arabic, #253

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Arabic #253 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5979)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5980) Full Width Quiet Touch Keyboard -- USB, Thai, #191

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Thai #191 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5980)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5981) Full Width Quiet Touch Keyboard -- USB, Russian, #443

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Russian #443 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5981)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5982) Full Width Quiet Touch Keyboard -- USB, Slovenian, #234

(No Longer Available as of August 31, 2012)

This feature provides a USB attached Slovenian #234 keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion. Color is Business Black.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5982)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#5983) Full Width Quiet Touch Keyboard -- USB, US English International, #103P

(No Longer Available as of August 31, 2012)

This feature provides a USB attached US English International #103P keyboard with a 3m cable. The two built-in USB ports conveniently provide for additional expansion.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#5983)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology

The IBM 80/160 GB Internal Tape Drive with VXA* Technology is a 5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses VXAtape* data cartridges and is compression capable, providing a capacity of up to 160 GB - a significant increase in capacity over the previous internal tape drives.

Characteristics

  • Capacity: 80 GB native mode, 160 GB (typical) compression mode
  • Form Factor: 5.25-inch half high
  • Media: uses VXAtape data cartridges
  • Technology: Helical scan, rotating head
  • Operation: Streaming
  • Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression
  • Interface: SCSI-2 (LVD/SE) asynchronous/synchronous
  • Compatibility: 80 GB mode (Read/Write), 160 GB compression (Read/Write)
  • Attributes provided: One 80/160 GB internal tape drive
  • Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal 16-bit address
  • For 9111-285: (#6120)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: No
    • Return parts MES: Does not apply
(#6204) PCI Universal Differential Ultra SCSI Adapter

The PCI Universal Differential Ultra SCSI Adapter is the latest technology advancement of an RS/6000 SCSI-2 differential adapter with a maximum data transfer rates of 40 MBytes per second. This adapter has the capability to be plugged into the newer +3.3 volt PCI slots as well as the older +5 volt PCI slots. Feature code # 6204 allows connection to external differential SCSI-2 F/W or Ultra SCSI type devices up to 25 meters away. Feature code # 6204 will negotiate with each external device and transfer data at the fastest SCSI data transfer rate capable by the external device. Check system sales pages as to which external differential subsystems are supported.

The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra) documentation. Industry standard 68 pin connectors are incorporated (SCSI "P" connector definition of X3T9.2/90-048).

  • Attributes provided: 15 external SCSI-2 addresses
  • Attributes required: 1 PCI slot.
  • For 9111-285: (#6204)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#6239) 2 Gigabit Fibre Channel PCI-X Adapter

The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single or dual initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high speed local and remote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter will auto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) of which the device or switch is capable. Distances of up to 500 meters running at 1 Gbps data rate and up to 300 meters running at 2 Gbps data rate are supported between the adapter and an attaching device or switch. When used with IBM supported Fibre Channel storage switches supporting long-wave optics, distances of up to 10 kilometers are capable running at either 1 Gps or 2 Gps data rates.

The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is required.

Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.

http://www.storage.ibm.com/hardsoft/disk/products.htm

Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.

  • Attributes provided: 1 Fibre Channel/FC-AL interface
  • Attributes required: 1 empty PCI or PCI-X slot
  • For 9111-285: (#6239)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#6258) 36/72GB 4mm Internal Tape Drive

The 36/72 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high, single-ended 16-bit tape drive, which provides a high capacity for save/restore and archive functions. This tape drive uses IBM 4-mm data cartridges and is compression capable, providing a capacity of up to 72 GB - a significant increase in capacity over the previous 20/40 4-mm internal tape drives (when using DDS-4 media).

Characteristics:

  • Capacity: 36 GB native mode, 72 GB (typical) compression mode
  • Form Factor: 5.25-inch half high
  • Media: IBM 4-mm supports new DAT72 media
  • Technology: Helical scan, rotating head
  • Operation: Streaming
  • Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression
  • Interface: SCSI-2 LVD and single ended

Compatability:

  • DDS3 - 12 GB native (Read/Write), 24 GB compression (Read/Write)
  • DDS4 - 20 GB native (Read/Write), 40 GB compression (Read/Write)
  • DAT72 - 36 GB native (Read/Write), 72 GB compression (Read/Write)
  • Attributes provided: 4mm tape capability
  • Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 LVD internal 16-bit address or SE
  • For 9111-285: (#6258)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: No
    • Return parts MES: Does not apply
(#6271) - LTO Ultrium 200GB Data Cartridge

(No Longer Available as of May 31, 2006)

LTO Ultrium 200GB Data Cartridge highlights By combining high storage capacity (200 GB native, 400 GB with 2:1 compression), performance, and reliability, the IBM Total Storage LTO Ultrium 200 GB Data Cartridges continue the IBM focus on enhancing tape technology. The cartridge is part of a long line of IBM data cartridges that help provide quality and reliability for organizations around the world. The IBM Total Storage LTO Ultrium 200 GB data cartridge, with a compressed capacity of up to 400 GB (2:1 compression), can be used in products featuring Ultrium 2 Tape Drives.

Characteristics:

  • Provides capacity, performance and reliability for midrange and network tape automated storage environments
  • Contains half-inch metal particle tape; cartridges feature a native data capacity of 200GB and a compressed data capacity of 400GB (2:1 compression)
  • Includes a Linear Tape-Open Cartridge Memory (LTO - CM) chip that contains cartridge specific information to communicate with Ultrium Tape Drives during loading/unloading via a radio frequency component
  • Attributes required: Storage conditions: 61-90F (16-32C);20-80% RH; 79F (26C) wet bulb max.
  • Cartridge disposal: Classified as nonhazardous waste per EPA regulation 40CFR261; can be disposed of as normal office trash.
  • Attributes provided: Ultrium 1 and Ultrium 2 compatible
  • Attributes required: LT02 Tape Drive and Tape operating conditions between 50-104 F, (10-40C); 20-80% RH; 79F (26C) wet Bulb max.
  • For 9111-285: (#6271)
    • Minimum required: 0
    • Maximum allowed: 5 (Initial order maximum: 5)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Yes
    • Return parts MES: No
(#6279) - VXA-320 160/320GB Internal Tape Drive

The IBM 160/320 GB Internal Tape Drive with VXA* Technology is a 5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high capacity for save/restore and archive functions. The tape drive uses "X" media VXAtape* data cartridges and is compression capable, providing a capacity of up to 320 GB - a significant increase in capacity, and data transfer rate over the previous internal tape drives.

Characteristics

  • Capacity: 160 GB native mode
  • Capacity: 320 GB compress mode, typical
  • Form Factor: 5.25-inch half high
  • Media: uses VXAtape "X" media data cartridges
  • Technology: Helical scan, rotating head
  • Operation: Streaming
  • Data Transfer Rate: 12 MBps native mode, 24MBps (typical) compression
  • Interface: SCSI-2,SCSI-3 Ultra 160 (LVD) asynchronous/synchronous
  • VXA-320 is read/write capable on X23, X10 and X6 media
  • Compatibility: VXA-2 format (Read/Write) on X6, X10, and X23, VXA-320 format (Read/Write) on X6, X10, and X23.
  • Attributes provided: One 160/320GB internal tape drive
  • Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal 16-bit address
  • For 9111-285: (#6279)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: No
    • Return parts MES: Does not apply
(#6470) Power Cord (6-foot), To Wall (125V, 15A), Plug Type #4

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #4 (NEMA 5-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length. The following countries/regions use the #6470 power cord to power the system and/or peripheral features requiring a power cord: United States, Antigua & Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Bonnaire, Calicos Islands, Canada, Cayman Islands, Colombia, Costa Rica, Cuba, Curacao, Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Guyana, Haiti, Honduras, Jamaica, Japan, Mexico, Micronesia, Montsderrrrat, Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, St. Kitts/Nevis, St. Martin, Taiwan, Tortola (BVI), Trinidad/Tobago, Venezuela.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6470)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6471) Power Cord (9-foot), To Wall/OEM PDU,(125V, 15A), Plug Type #70

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #70 (iNMETRO NBR 6147, NEMA 5-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6471 power cord to power the system and/or peripheral features requiring a power cord: Brazil.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6471)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6472) Power Cord (9-foot), To Wall/OEM PDU,(250V, 16A), Plug Type #18

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #18 (CEE 7 VII). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6472 power cord to power the system and/or peripheral features requiring a power cord: Afghanistan, Albania, Algeria, Andorra, Angola, Armenia, Austria, Belarus, Belgium, Benin, Bosnia/Herzegovina, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Conogo, Croatia, Czech Republic, Dahomey, Djibuouti, Egypt, Equatorial Guinea, Eritrea, Estonia, Etrhiopia, Finland, France, French Polynesia, French Guyana, Gabon, Georgia, Germany, Greece, Guadeloupe, Guinea, Guinea-Bissau, Hungary, Iceland, Indonesia, Iran, Ivory Coast, Kazakhstan, Krygystan, Laos, Latvia, Lebanon, Lithuania, Luxembourg, Macau, Macedonia, Mali, Martinigue, Mauritania, Mauritus, Mayotte, Moldova, Monaco, Mongolia, Morocco, Mozambique, Netherlands, New Caledonia, Niger, North Korea (C19 only), Norway, Poland, Portugal, Principe, Reunion, Romania, Russia, Rwanda, St. Thomas, Saudi Arabia, Senegal, Serbia, Slovenia, Somalia, South Korea (C19 only), Spain, Surinam, Sweden, Syria, Tahiti, Tajikistan, Togo, Tunesia, Turkey, Turkmenistan, Ukraine, Upper Volta, Uzbekistan, Vanuatu, Vietnam, Wallis & Futuna, Zaire, Zimbabwe.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6472)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6473) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type 19

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #19 (CEE). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6473 power cord to power the system and/or peripheral features requiring a power cord: Denmark.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6473)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6474) Power Cord (9-foot), To Wall/OEM PDU, (250V, 13A), Plug Type #23

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #23 (BS 1364A). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6474 power cord to power the system and/or peripheral features requiring a power cord: Abu Dhabi, Bahrain, Botswana, Brunei, Channel Islands, Cyprus, Dominica, Gambia, Grenada, Grenadines, Guyana, Hong Kong, Iraq, Ireland, Jordan, Kenya, Kuwait, Liberia, Malawi, Malaysia, Malta, Myanmar, Nkigeria, Oman, Qatar, Sierra Leone, Singapore, St. Kitts, St. Lucia, Seychelles, Sudan, Tanzania, Trinidad & Tobago, United Arab Emirates, United Kingdom, Yemen, Zambia.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6474)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6475) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #32

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #32 (SII 32-1971). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6475 power cord to power the system and/or peripheral features requiring a power cord: Israel.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6475)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6476) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #24

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #24 (SEV 24507). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6476 power cord to power the system and/or peripheral features requiring a power cord: Lichtenstein, Switzerland.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6476)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6477) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #22

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #22 (SABS 164). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6477 power cord to power the system and/or peripheral features requiring a power cord: Bangladesh, LeSotho, Maceo, Maldives, Nambia, Pakistan, Samoa, South Africa, Sri Lanka, Swaziland, Uganda.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6477)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6478) Power Cord (9-foot), To Wall/OEM PDU, (250V, 16A), Plug Type #25

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #25 (CEI 23-16). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6478 power cord to power the system and/or peripheral features requiring a power cord: Chile, Italy, Libya.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6478)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6487) Power Cord (6-foot), To Wall, (250V, 15A), United States, Plug Type #5

(No Longer Available as of May 27, 2011)

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #5 (NEMA 6-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length. The following countries/regions use the #6487 power cord to power the system and/or peripheral features requiring a power cord: United States, Anguilla, Antigua & Barbuda, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Bonnaire, Caicos Is., Canada, Cayman Islands, Colombia, Costa Rica, Cuba, Curacao, Dominican Republic, Ecuador, El Salvador, Guam, Guatamala, Haiti, Honduras, Jamaica, Japan, Micronesia, Montserrat, Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, St. Marten NA, Taiwan, Tortola (BVI), Thailand, Venezuela.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6487)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6488) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A or 250V, 10A), Plug Type #2

This power cord goes from the system and/or peripheral features to a wall-type outlet. Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6488 power cord to power the system and/or peripheral features requiring a power cord: Argentina Paraguay Uruguay

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6488)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6493) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #62

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #62 (GB 1053). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6493 power cord to power the system and/or peripheral features requiring a power cord: People's Republic of China.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6493)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6494) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #69

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #69 (IS 6538). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6494 power cord to power the system and/or peripheral features requiring a power cord: India.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6494)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6495) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #73

(No longer available as of August 29, 2008)

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #73. Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6495 power cord to power the system and/or peripheral features requiring a power cord: Brazil.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6495)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6496) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #66

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #66 (KETI). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6496 power cord to power the system and/or peripheral features requiring a power cord: North Korea, South Korea.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6496)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6574) Ultra320 SCSI 4-Pack

(No Longer Available as of May 28, 2010)

This feature provides an enclosure that can contain up to 4 Ultra3 SCSI disk drives.

  • Attributes provided: Enclosure for up to 4 disk drives
  • Attributes required: Empty enclosure location.
  • For 9111-285: (#6574)
    • Minimum required: 1
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#6585) DASD Locking Kit

(No Longer Available as of December 12, 2008)

This feature number provides a mechanism that will lock four hot-swap disk drive bays in place and not allow the disk drives to be removed from the system until unlocked.

  • Attributes provided: DASD Locking Kit
  • Attributes required: DASD 4-pack
  • For 9111-285: (#6585)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6598) Disk Slot Fillers (Quantity 4)

(No Longer Available as of August 31, 2017)

This feature allows the customer to move disks from the system to another system or an IO drawer and to place a blank disk filler in the empty disk slot. Systems shipped from manufacturing have blank filler in the empty disk slots.

  • Attributes provided: 4 disk slot fillers
  • Attributes required: None
  • For 9111-285: (#6598)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6651) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #75

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #75 (KETI). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6651 power cord to power the system and/or peripheral features requiring a power cord: Taiwan.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6651)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6659) Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug Type #76

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #76 (KETI). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6659 power cord to power the system and/or peripheral features requiring a power cord: Taiwan.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6659)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6670) Power Cord (6-foot), To Wall (125V, 15A), Plug Type #59 (DENAN marking)

(No longer available as of August 29, 2008)

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #59 (NEMA 5-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length. This power cord meets the DENAN marking requirement in Japan.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6670)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6680) Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A), Plug Type #6, Insulated

This insulated power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #6 (AS 3112-1964 NZS 198). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. The following countries/regions use the #6479 power cord to power the system and/or peripheral features requiring a power cord: Australia, Fiji Islands, Kiribati, Nauru, New Zealand, Papua New Guinea, W. Samoa.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6680)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#6687) Power Cord (6-foot), To Wall, (250V, 15A), Plug Type #57 (DENAN marking)

(No longer available as of August 29, 2008)

This power cord goes from the system and/or peripheral features to a wall-type outlet. Plug type #57 (NEMA 6-15). Refer to Corporate Bulletin C-B-2-4700-009 for a description of plug types. 6-foot length. This power cord meets the DENAN marking requirement in Japan.

  • Attributes provided: Power cord
  • Attributes required: None
  • For 9111-285: (#6687)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#7305) AAP Software Pre-Install Indicator

Software pre-install indicator for Authorized Assemblers

  • Attributes provided: Software Preinstall
  • Attributes required: Authorized Assembler Order
  • For 9111-285: (#7305)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#7319) One Processor Entitlement for Processor Feature # 8327

(No Longer Available as of April 25, 2014)

This feature number will permanently entitle one processor on a #8327 processor card.

  • Attributes provided: Entitlement of processor for #8327
  • Attributes required: Feature #8327 with non-entitled processor
  • For 9111-285: (#7319)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#7320) One Processor Entitlement for Processor Feature #8330

(No Longer Available as of April 25, 2014)

This feature number will permanently entitle one processor on a #8330 processor card.

  • Attributes provided: Entitlement of processor for #8330
  • Attributes required: Feature #8330 with non-entitled processor
  • For 9111-285: (#7320)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#7336) - One Processor Entitlement for Processor Feature #5326

(No Longer Available as of April 25, 2014)

This feature number will permanently entitle one processor on a #5326 processor card.

  • Attributes provided: Entitlement of processor for #5326
  • Attributes required: Feature #5326 with non-entitled processor
  • For 9111-285: (#7336)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1 )
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#7339) - One Processor Entitlement for Processor Feature #5327

(No Longer Available as of April 25, 2014)

This feature number will permanently entitle one processor on a #5327 processor card.

  • Attributes provided: Entitlement of processor for #5327
  • Attributes required: Feature #5327 with non-entitled processor
  • For 9111-285: (#7339)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2 )
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#7801) Ethernet Cable, 6M, Hardware Management Console to System Unit

(No Longer Available as of January 4, 2010)

This feature provides a six meter long Ethernet cable for attachment of a Hardware Management Console to the system unit.

  • Attributes provided: 6M Ethernet Cable
  • Attributes required: Ethernet port on Hardware Management Console
  • For 9111-285: (#7801)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#7802) Ethernet Cable, 15M, Hardware Management Console to System Unit

This feature provides a fifteen meter long Ethernet cable for attachment of a Hardware Management Console to the system unit.

  • Attributes provided: 15M Ethernet Cable
  • Attributes required: Ethernet port on Hardware Management Console
  • For 9111-285: (#7802)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#7877) Media Backplane

(No Longer Available as of May 28, 2010)

This feature is required to support the system control panel and any IDE media device installed in the system.

  • Attributes provided: IDE Media Backplane Card
  • Attributes required: None
  • For 9111-285: (#7877)
    • Minimum required: 1
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter

(No Longer Available as of June 23, 2006)

This cable provides attachment between the 128-port Asynchronous Controller and the first RAN in a daisy chain, or attachment between RANs in the daisy chain.

  • Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN
  • Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy chain.
  • For 9111-285: (#8131)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch)

(No Longer Available as of June 23, 2006)

This cable may be substituted for the 4.5 meter (15 foot) async controller cable whenever a customer configuration requires stacked Remote Async Nodes.

  • Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN
  • Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy chain.
  • For 9111-285: (#8132)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8133) RJ-45 to DB-25 Converter Cable

(No Longer Available as of November 26, 2010)

This cable can be used to attach EIA-232 devices to the 16 port EIA 232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async subsystem. This cable provides a 25-pin D shell connector for device attachment. Four cables are provided per each order.

  • Attributes provided: 4 DB-25 EIA-232 ports
  • Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)
  • For 9111-285: (#8133)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8136) Rack Mountable Remote Asynchronous Node 16-Port EIA-232

The Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (RAN) is a modified version of the existing 16-port Remote Async Node (feature #8130 or 8134) in an industry-standard 19-inch rack mount chassis to allow simpler installation and ease-of-use. Like the existing RAN, it can also be configured as a desktop device.

As an additional benefit, the metal chassis meets FCC Class B/CISPR B when used with similarly rated RS/6000 host to meet the needs of customers with these requirements.

The RANs provide 16 ports of EIA-232 capability with full modem controls on each port and are connected to the 128-port Async Controller (Micro Channel or ISA versions) residing in the host. RANs are connected in daisy-chain fashion up to 8 RANs per 128-port Async Controller (either version).

The rack-mountable RAN offers these enhanced features:

  • Industry-standard 19-inch rack mountable chassis (can be configured for stacking on a desktop or mounted in a 19-inch rack).
  • Meets FCC Class B/CISPR B when used with similarly rated RS/6000 host.
  • All RJ-45 connectors are now on the front panel, greatly enhancing cable management.
  • The DB-15 synchronous connectors (cabling from host to RAN and between RANs) and the power cord and switch are located on the rear panel.
  • Power supply is self contained within the unit.

The rack-mountable RAN offers these same features as the existing RAN product:

  • Identical function and support as existing 16-port Remote Async Node (RAN), feature #8130 or 8134.
  • Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with either a Micro Channel or ISA host adapter.
  • Ability to monitor individual port operation, synchronous line station, and other diagnostics from front panel.
  • Built-in diagnostics can test ports independent of RS/6000 host.
  • Full modem control supports the following interface signals: TxD, RxD, RTS, CTS, DSR, DCD, DTR, RI.
  • The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order) currently used on the existing RANs can be used to attach devices having a DB-25 connector to the Remote Async Nodes.
  • Individual ports support a maximum EIA-232 distance of 62 meters (200 feet).
  • Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter), feature #8132 (23 cm) or customer-supplied cables.
  • Location of RAN up to 330 meters from the host using standard shielded 8-wire twisted pair cabling.
  • Remote operation via synchronous modems or CSU/DSU extends the distance and allows location of RANs at geographically distant location from the host.
  • Attributes provided: 16 RJ-45 EIA-232 ports AND 1 RAN-to-RAN connection
  • Attributes required: 1 RAN-to-128-port Controller connection OR 1 RAN-to-RAN connection
  • For 9111-285: (#8136)
    • Minimum required: 0
    • Maximum allowed: 16 (Initial order maximum: 0)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply

    Note: Maximum of 8 per #2944 -- 128-port asynch adapter

(#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232

Provides remote connection of up to 16 EIA-232 devices to a 128-Port Asynchronous Controller.

Each port can be individually programmed to provide a asynchronous connection of 230 Kbaud, but a limited number of ports in a maximum configuration (128 ports) can be supported at this baud rate.

  • Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with either a Micro Channel, ISA or PCI host adapter.
  • Ability to monitor individual port operation, synchronous line station, and other diagnostics from front panel.
  • Built-in diagnostics can test ports independent of RS/6000 host.
  • Full modem control supports the following interface signals: TxD, RxD, RTS, CTS, DSR, DCD, DTR, RI.
  • The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order) currently used on the existing RANs can be used to attach devices having a DB-25 connector to the Remote Async Nodes.
  • Individual ports support a maximum EIA-232 distance of up to 31 meters (100 feet), depending on the baud rate.
  • Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
  • Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps) from host using standard shielded 8-wire twisted pair cabling.
  • Remote operation via synchronous modems or CSU/DSU extends the distance and allows location of RANs at geographically distant location from the host.
  • Attributes provided: 16 EIA-232 Async ports
  • Attributes required: One 128-port adapter per eight (#8137s)
  • For 9111-285: (#8137)
    • Minimum required: 0
    • Maximum allowed: No max (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Support
    • CSU: Yes
    • Return parts MES: Does not apply
(#8227) Tie-down Strap Security Device

(No Longer Available as of May 28, 2010)

The tie-down strap is used as an aid in securing the system unit and connects the system unit via a cable to a more secure item such as a desk, wall fixture, etc.

  • Attributes provided:
  • Attributes required:
  • For 9111-285: (#8227)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8231) Memory Offering 32GB/64GB/96GB/128GB (Multiples of 4 of 2x4GB DIMMs

(No Longer Available as of May 27, 2011)

Each occurrence of this feature delivers 2 each 4GB, 276 pin Dimms for a total of 8GB of Memory (533 MHz, DDR2, SDRAM). This is a special priced feature that can only be ordered in multiples of 4. The minimum result being 32 GB of memory in 8 (4GB) dimms. This feature must be ordered in quantities of 4, 8, 12 or 16. No other order quantities will be accepted.

Note: MES orders for feature number 8231 are available only for authorized IBM Business Partners certified for participation in the IBM Solution Delivery Integration (SDI) Program.

  • Attributes provided: DDR2 Memory
  • Attributes required: DDR2 dimm slots
  • For 9111-285: (#8231)
    • Minimum required: 0
    • Maximum allowed: 4 (Initial order maximum: 4)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8244) Audio PCI Adapter for Workstations

(No longer available as of February 29, 2008)

The Audio PCI Adapter for Workstations is a high performance workstation class audio PCI adapter that is optimized for support in the AIX professional workstation environment and their associated applications. It is 3.3 volt, 32 bit PCI adapter that runs at 33MHz speed and complies with the Intel AC 1997 Version 2.1 Specifications. The Audio PCI Adapter for Workstations provides external jacks for headphones, speaker output, line input, and microphone input as well as an internal connector for CD or DVD drive audio input.

  • Attributes provided: One Audio PCI Adapter with internal and external audio connectors
  • Attributes required: One available PCI slot
  • For 9111-285: (#8244)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8327) 1-core 1.65 GHz POWER5+ Processor Card, 36MB L3 Cache

(No Longer Available as of February 12, 2007)

1-core processor card with 1.65 GHz POWER5+ processor and 36MB of L3 cache. Attached to planar.

  • Attributes provided: 1-core processor card, 36MB L3 cache.
  • Attributes required: None
  • For 9111-285: (#8327)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#8330) 2-core 1.9 GHz POWER5+ Processor Card, 36MB L3 Cache

(No Longer Available as of February 12, 2007)

2-core processor card with 1.9 GHz POWER5+ processor and 36MB of L3 cache. Attached to planar.

  • Attributes provided: 2-core processor card, 36MB L3 cache.
  • Attributes required: None
  • For 9111-285: (#8330)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#8402) - Zero-priced Processor Entitlement for #5326

(No Longer Available as of April 25, 2014)

This feature number provides a customer with one processor entitlement at no additional charge. Available only with Express Product Offerings.

  • Attributes provided: One processor entitlement for #5326
  • Attributes required: Qualifying Express Product Offering
  • For 9111-285: (#8402)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1 )
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8403) - Zero-priced Processor Entitlement for #5327

(No Longer Available as of April 25, 2014)

This feature number provides a customer with one processor entitlement at no additional charge. Available only with Express Product Offerings.

  • Attributes provided: One processor entitlement for #5327
  • Attributes required: Qualifying Express Product Offering
  • For 9111-285: (#8403)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1 )
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8409) Zero-priced Express Product Offering Processor Entitlement for #8327

(No Longer Available as of April 25, 2014)

This feature number provides a customer with one processor entitlement at no additional charge. Available only with an Express Product Offering.

  • Attributes provided: One processor entitlement for #8327
  • Attributes required: Qualifying Express Product Offering
  • For 9111-285: (#8409)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8410) Zero-priced Express Product Offering Processor Entitlement for #8330

(No Longer Available as of April 25, 2014)

This feature number provides a customer with one processor entitlement at no additional charge. Available only with an Express Product Offerings.

  • Attributes provided: One processor entitlement for #8330
  • Attributes required: Qualifying Express Product Offering
  • For 9111-285: (#8410)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8422) SpaceBall 3D Input Device

(No Longer Available as of November 20, 2007)

SpaceBall is a 3D input device that allows a customer to view a computer-generated model from many angles. By applying fingertip control to push, pull, and twist the ball, you manipulate the image on the screen. Spaceball facilitates zooming, panning, and rotating.

  • Attributes provided: SpaceBall 3D Input Device
  • Attributes required: Asynch adapter installed in the system
  • For 9111-285: (#8422)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Supported
    • CSU: Yes
    • Return parts MES: No
(#8423) Magellan XT 3D Input Device

(No Longer Available as of November 20, 2007)

The Magellan XT 3D Input Device is a high-level 3D input device which provides real-time 3D motion control for increased productivity, better design comprehension, and early detection of design errors.

  • Attributes provided: Magellan XT 3D Input Device
  • Attributes required: Asynch adapter installed in the system
  • For 9111-285: (#8423)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 0)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Supported
    • CSU: Yes
    • Return parts MES: No
(#8424) SpaceBall 3D Input Device (USB)

(No Longer Available as of July 27, 2007)

SpaceBall is a 3D input device that allows a customer to view a computer-generated model from many angles. By applying fingertip control to push, pull, and twist the ball, you manipulate the image on the screen. SpaceBall facilitates zooming, panning, and rotating. RoHS compliant. Attaches to USB port.

  • Attributes provided: SpaceBall 3D Input Device
  • Attributes required: Available USB port
  • For 9111-285: (#8424)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8425) SpaceMouse 3D Input Device (USB)

(No Longer Available as of July 27, 2007)

The SpaceMouse 3D Input Device is a high-level 3D input device which provides real-time 3D motion control for increased productivity, better design comprehension, and early detection of design errors. By applying fingertip control to push, pull, and twist the ball, you manipulate the image on the screen. RoHS compliant. Attaches to USB port.

  • Attributes provided: SpaceMouse 3D Input Device
  • Attributes required: Available USB port
  • For 9111-285: (#8425)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2)
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8426) - SpacePilot 3D Input Device

(No Longer Available as of January 2, 2009)

The SpacePilot 3D Input Device is a high-level 3D motion controller which enables the user to manipulate 3D models and 3D cameras naturally and intuitively with up to six degrees of freedom of control to simultaneously pan, zoom, and rotate 3D objects in every direction.

The SpacePilot is:

Autosensing -- Automatically senses application and mode the user is working with and displays input information on the unit's LCD.

Adaptive -- Automaticallly adapts to changes in the application or in the tasks so the user is presented with the correct functions when they are needed.

Extendable -- Users can take advantage of the SpacePilot's ability to easily program an unlimited number of commands, in addition to the pre- programmed commands.

Attaches to USB port.

  • Attributes provided: SpacePilot 3D Input Device
  • Attributes required: Available USB port
  • For 9111-285: (#8426)
    • Minimum required: 0
    • Maximum allowed: 2 (Initial order maximum: 2 )
    • OS level required: AIX 5.2 or AIX 5.3, or later.
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8800) Quiet Touch Keyboard - USB, Business Black, US English, #103P

(No Longer Available as of January 26, 2007)

This feature provides a USB attached US English #103P keyboard. The two built-in USB ports conveniently provide for additional expansion.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8800)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8801) Quiet Touch Keyboard - USB, Business Black, French, #189

(No Longer Available as of January 26, 2007)

This feature provides a USB attached French #189 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8801)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8802) Quiet Touch Keyboard - USB, Business Black, Italian, #142

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Italian #142 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8802)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8803) Quiet Touch Keyboard - USB, Business Black, German/Austrian, #129

(No Longer Available as of January 26, 2007)

This feature provides a USB attached German/Austrian #129 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8803)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8804) Quiet Touch Keyboard - USB, Business Black, UK English, #166

(No Longer Available as of January 26, 2007)

This feature provides a USB attached UK English #166 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8804)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8805) Quiet Touch Keyboard - USB, Business Black, Spanish, #172

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Spanish #172 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8805)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8806) Quiet Touch Keyboard - USB, Business Black, Japanese, #194

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Japanese #194 keyboard. The two built-in USB ports conveniently provide for additional expansion.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8806)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8807) Quiet Touch Keyboard - USB, Business Black, Brazilian/Portuguese, #275

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Brazilian Portuguese #275 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8807)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8808) Quiet Touch Keyboard - USB, Business Black, Canadian French, #058

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Canadian French #058 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8808)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8810) Quiet Touch Keyboard - USB, Business Black, Belgian/Dutch, #120

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Belgian/Dutch #120 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8810)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8811) Quiet Touch Keyboard - USB, Business Black, Swedish/Finnish, #153

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Swedish/Finnish #153 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8811)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8812) Quiet Touch Keyboard - USB, Business Black, Danish, #159

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Danish #159 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8812)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8813) Quiet Touch Keyboard - USB, Business Black, Bulgarian, #442

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Bulgarian #442 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8813)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8814) Quiet Touch Keyboard - USB, Business Black, Swiss/French/German, #150F/G

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Swiss/French/German #150F/G keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8814)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8816) Quiet Touch Keyboard - USB, Business Black, Norwegian, #155

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Norwegian #155 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8816)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8817) Quiet Touch Keyboard - USB, Business Black, Dutch, #143

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Dutch #143 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8817)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8818) Quiet Touch Keyboard - USB, Business Black, Portuguese, #163

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Portuguese #163 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8818)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8819) Quiet Touch Keyboard - USB, Business Black, Greek, #319

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Greek #319 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8819)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8820) Quiet Touch Keyboard - USB, Business Black, Hebrew, #212

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Hebrew #212 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8820)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8821) Quiet Touch Keyboard - USB, Business Black, Hungarian, #208

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Hungarian #208 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8821)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8823) Quiet Touch Keyboard - USB, Business Black, Polish, #214

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Polish #214 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8823)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8825) Quiet Touch Keyboard - USB, Business Black, Slovakian, #245

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Slovakian #245 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8825)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8826) Quiet Touch Keyboard - USB, Business Black, Czech, #243

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Czech #243 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8826)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8827) Quiet Touch Keyboard - USB, Business Black, Turkish, #179

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Turkish #179 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8827)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8829) Quiet Touch Keyboard - USB, Business Black, LA Spanish, #171

(No Longer Available as of January 26, 2007)

This feature provides a USB attached LA Spanish #171 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8829)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8830) Quiet Touch Keyboard - USB, Business Black, Arabic, #238

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Arabic #238 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8830)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8833) Quiet Touch Keyboard - USB, Business Black, Korean, #413

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Korean #413 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8833)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8834) Quiet Touch Keyboard - USB, Business Black, Chinese/US, #467

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Chinese/US #467 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8834)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8835) Quiet Touch Keyboard - USB, Business Black, French Canadian, #445

(No Longer Available as of January 26, 2007)

This feature provides a USB attached French Canadian #445 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8835)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8836) Quiet Touch Keyboard - USB, Business Black, Thai, #191

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Thai #191 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8836)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8838) Quiet Touch Keyboard - USB, Business Black, Russian, #443

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Russian #443 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8838)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8839) Quiet Touch Keyboard - USB, Business Black, Yugoslavian/Latin, #105

(No Longer Available as of January 26, 2007)

This feature provides a USB attached Yugoslavian/Latin #105 keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8839)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8840) Quiet Touch Keyboard - USB, Business Black, US English (EMEA), #103P

(No Longer Available as of January 26, 2007)

This feature provides a USB attached US English #103P (EMEA) keyboard. The two built-in USB ports conveniently provide for additional expansion. Not available in Japan.

  • Attributes provided: Keyboard
  • Attributes required: USB Port
  • For 9111-285: (#8840)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8841) Mouse - USB, Business Black with Keyboard Attachment Cable

(No Longer Available as of December 31, 2009)

This feature provides a three button USB mouse and a cable for attachment to a keyboard.

  • Attributes provided: 3-Button USB Mouse
  • Attributes required: Keyboard with USB Mouse Attachment Port
  • For 9111-285: (#8841)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#8845) - USB Mouse

(No Longer Available as of March 31, 2018)

The optical LED USB Mouse has 2 buttons and a scroll wheel that acts as a third button. Mouse cable is 1.8 meters long. OS does not support scrolling with the wheel. Business black with red scroll wheel.

  • Attributes provided: 2-Button USB Mouse w/scroll wheel that acts as 3rd button.
  • Attributes required: USB attachment Port
  • For 9111-285: (#8845)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: MES
    • CSU: Yes
    • Return parts MES: No
(#9004) Southern Hemisphere Designator for Monitors

Specifies that southern hemisphere models are required for all CRT monitors on the initial plant order or on MES orders. Not required with TFT monitors.

  • Attributes provided: None
  • Attributes required: Monitor
  • For 9111-285: (#9004)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both
    • CSU: Yes
    • Return parts MES: No
(#9300) Language Group Specify - US English

English language group for nomenclature and standard publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9300)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9700) Language Group Specify - Dutch

Dutch language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9700)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9703) Language Group Specify - French

French language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9703)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9704) Language Group Specify - German

German language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9704)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9705) Language Group Specify - Polish

Polish language group for Nomenclature and Standard Publications.

  • Attributes provided: none
  • Attributes required: none
  • For 9111-285: (#9705)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9707) Language Group Specify - Portuguese

Portuguese language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9707)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9708) Language Group Specify - Spanish

Spanish language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9708)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9711) Language Group Specify - Italian

Italian language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9711)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9712) Language Group Specify - Canadian French

Canadian French language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9712)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9714) Language Group Specify - Japanese

Japanese language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9714)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9715) Language Group Specify - Traditional Chinese (Taiwan)

Traditional Chinese language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9715)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9716) Language Group Specify - Korean

Korean language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9716)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9718) Language Group Specify - Turkish

Turkish language group for nomenclature and publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9718)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9719) Language Group Specify - Hungarian

Hungarian language group for Nomenclature and Standard Publications.

  • Attributes provided: none
  • Attributes required: none
  • For 9111-285: (#9719)
    • Minimum required:
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9720) Language Group Specify - Slovakian

Slovakian language group for Nomenclature and Standard Publications.

  • Attributes provided: none
  • Attributes required: none
  • For 9111-285: (#9720)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9721) Language Group Specify - Russian

Russian language group for nomenclature and standard publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9721)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9722) Language Group Specify - Simplified Chinese (PRC)

Simplified Chinese language group for nomenclature and standard publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9722)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9724) Language Group Specify - Czech

Czech language group for nomenclature and standard publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9724)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9725) Language Group Specify -- Romanian

Romanian language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9725)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply
(#9727) Language Group Specify -- Slovenian

Slovenian language group for Nomenclature and Standard Publications.

  • Attributes provided: None
  • Attributes required: None
  • For 9111-285: (#9727)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply

Feature exchanges

Not available.
Back to topBack to top
 

Accessories

None.

Customer replacement parts

Not available.
Back to topBack to top
 

Machine elements

Not available.
Back to topBack to top
 

Supplies

None.

Supplemental media

Not available.

Trademarks

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

** Company, product, or service name may be a trademark or service mark of others.

Windows is a trademark of Microsoft Corporation.
 © IBM Corporation 2017.
Back to topBack to top

Share this page

Digg Linked In

Contact IBM

Feedback