Feedback


QLogic 2-port 10Gb Converged Network Adapter (CFFh) for IBM BladeCenter helps deliver connectivity to LAN and SAN on a single adapter

IBM United States Hardware Announcement 109-331
May 26, 2009

 
 ENUS109-331.PDF (83KB)

Table of contents   Document options  
At a glance At a glance Description Description
Overview Overview Product number Product number
Key prerequisites Key prerequisites Technical information Technical information
Planned availability date Planned availability date Prices Prices
 
Printable version Printable version

 
Top rule
At a glance
Bottom rule

Highlights of the QLogic 2-port 10Gb Converged Network Adapter (CFFh) for IBM® BladeCenter® (42C1830) include:

  • Combo Form Factor (CFFh) PCI Express x8 2.0 adapter
  • Two ports with XAUI interfaces for PCIe x8 to the HSSM
  • Support for up to two CEE HSSMs in BC-H or BC-HT chassis
  • Support for 10Gb Converged Enhanced Ethernet (CEE)
  • Support for Fiber Channel over Converged Enhanced Ethernet (FCoCEE)
  • Full hardware offload for FCoCEE protocol processing
  • Support for IPv4 and IPv6
  • Support for SAN boot over CEE, PXE boot, and iSCSI boot
  • Support for Wake on LAN®
  • Support for BOFM for BIOS, UEFI, and FCode

For technical support:


 
Back to topBack to top
 
Top rule
Overview
Bottom rule

The QLogic 2-port 10Gb Converged Network Adapter (CFFh) for IBM BladeCenter offers robust 8Gb Fibre Channel storage connectivity and 10Gb networking over a single Converged Enhanced Ethernet (CEE) link.

Since this adapter combines the functions of a Network Interface Card and a Host Bus Adapter on a single converged adapter, clients see potential benefits in cost, power/cooling, and datacenter footprint by deploying less hardware.

This adapter is based on industry-standard PCIe architecture and offers significant savings in cable and transceiver cost in BladeCenter deployment. This Converged Network Adapter (CNA) utilizes advanced protocol processing such as priority-based flow control, Enhanced Transmission Selection, and Data Center Bridging Capability Exchange (DCBX).

These CNAs are backward compatible with many 4 Gb storage targets and work with most existing LAN and SAN infrastructures, helping provide you with investment protection when consolidating your datacenters.

This CNA carries a one-year limited warranty or, when installed in a BladeCenter, will have the same warranty as your BladeCenter system's base warranty and any IBM ServicePac® upgrade.

The QLogic 10Gb CNA (CFFh) form factor is supported in the BC-H and BC-HT chassis with compatible high-speed modules.


 
Back to topBack to top
 
Top rule
Key prerequisites
Bottom rule

Supported BladeCenter with an available CFFh PCI Express expansion slot


 
Back to topBack to top
 
Top rule
Planned availability date
Bottom rule

June 26, 2009


 
Back to topBack to top
 
Top rule
Description
Bottom rule

The QLogic 2-port 10Gb Converged Network Adapter (CFFh) for IBM BladeCenter offers an affordable and reliable SAN and LAN connection for small and medium businesses. The adapter is easy to use, with demonstrated quality and robustness. The QLogic 2-port 10Gb Converged Network Adapter (CFFh) for IBM BladeCenter is a 2-port daughter card (expansion card) utilizing a high-speed PCIe x8 system connection. It utilizes the IEEE standard XAUI interface to connect to compatible high-speed modules. This adapter offers 10Gbps per port maximum throughput for high bandwidth. It accelerates the storage (SAN) and networking (LAN) traffic, with full hardware protocol for successful, enhanced Fibre Channel over Ethernet protocol processing.

Convergence helps lower the total cost of ownership (TCO) by potentially reducing hardware, power, cooling, management, and maintenance costs. It helps offer investment protection by providing seamless compatibility with most existing FC storage, Ethernet networks, driver software, and management applications. The CFFh form factor and 10Gb Ethernet HSSM or 10Gb CEE HSSM are all supported in the BCH and BCH-T chassis.

Additional information: All offers are subject to availability. IBM reserves the right to alter product offerings and specifications at any time without notice. IBM is not responsible for photographic or typographic errors.

IBM makes no representation or warranty regarding third-party products or services.


 
Back to topBack to top
 
Top rule
Product number
Bottom rule

The following are newly announced features on the specified models of the IBM xSeries® 7870, 7901, 7902, 7971, 7972, 7995, 8014, 8028, and 8853 machine types:

Description                                         MT  Model Feature
 
QLogic 2-pt 10Gb CNA (CFFh) in Exp Slot            7995  AC1     0073
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in Exp Slot            8853  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl Exp Slot       7995  AC1     0074
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl Exp Slot       8853  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in 2nd Exp Slot        8853  AC1     0075
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl 2nd Exp Slot   8853  AC1     0076
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot  7901  AC1     0077
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot  7902  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot  7971  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot  7972  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot  7995  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot  8853  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt                                                7901  AC1     0078
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt                                                7902  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt                                                7971  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt                                                7972  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt                                                7995  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt                                                8853  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in BladeServer         7901  AC1     0079
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in BladeServer         7902  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in BladeServer         7971  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in BladeServer         7972  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl BladeServer
Slot                                               7901  AC1     0080
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl BladeServer
Slot                                               7902  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl BladeServer
Slot                                               7971  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl BladeServer
Slot                                               7972  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in MP Exp Unit         7902  AC1     0083
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in MP Exp Unit         7972  AC1
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl MP Exp Slot    7902  AC1     0084
                                                         MC1
QLogic 2-pt 10Gb CNA (CFFh) in addl MP Exp Slot    7972  AC1
                                                         MC1
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter                                7870  AC1     3592
                                                         MC1
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter                                7901  AC1
                                                         MC1
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter                                7902  AC1
                                                         MC1
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter                                7971  AC1
                                                         MC1
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter                                7972  AC1
                                                         MC1
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter                                7995  AC1
                                                         MC1
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter                                8014  AC1
                                                         MC1
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter                                8028  AC1
                                                         MC1
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter                                8853  AC1
                                                         MC1
Options SEOs
                                                       SEO
Description                                           number
 
QLogic 2-port 10Gb Converged Network Adapter          42C1830
 (CFFh) for IBM BladeCenter
 

 
Back to topBack to top
 
Top rule
Technical information
Bottom rule

Product name

  • QLogic 2-port 10Gb Converged Network Adapter (CFFh) for IBM BladeCenter
Product positioning

Ideal for businesses looking at consolidations without sacrificing performance, this adapter provides an opportunity to reduce adapters, switches, cabling, and optics while reducing the overall storage footprint, hence improving cooling and saving power. It offers:

  • 10Gbps maximum throughput for high-bandwidth storage (SAN) and networking (LAN) traffic and full hardware offload for FCoE protocol processing
  • Reduced hardware, cabling, power, cooling, and management costs through convergence of data and storage networking
  • Preservation of familiar data and storage concepts, resulting in lower training and administrative costs
  • Communication via Ethernet, the most common networking technology in the world
  • Ability to work seamlessly with existing FC storage and compatibility with existing FC and networking drivers that have been deployed in millions of existing systems
Physical specifications

Height: 68.9 mm (2.71 in)

Width: 167.7 mm (6.60 in)

Depth: 18.4 mm (0.73 in)

Weight: 0.127 kg (0.28 lb)

All measurements are approximate.

Operating environment

Temperature:

  • 0 to 55 degrees C (32 to 113 degrees F) at 0 to 914 m (0 to 3,000 ft) operating
  • -43 to 73 degrees C (-40 to 163 degrees F) at 0 to 914 m (0 to 3,000 ft) storage

Relative humidity: 5% to 93% (non-condensing)

This adapter supports or complies with the following standards:

  • Peripheral Component Interconnect (PCI) specification 2.2
  • Hardware-enabled to meet the International Organization for Standardization (ISO) 9241, Part 3

Equipment approvals and safety

  • FCC - Verified to comply with Part 15 of the FCC Rules, Class A
  • Canada ICES-003, issue 4, Class A
  • UL/IEC 60950-1 :2001
  • CSA C22.2 No. 60950-1-03
Energy Star compliance

Is this product Energy Star Compliant? No

Note: The Energy Star emblem does not represent EPA endorsement of any product or service.

Hardware requirements

The 8 Gb PCIE Host Bus Adapter is supported on the following IBM platforms.

Note: Refer to IBM ServerProven® for a complete list of individual systems and operating systems interoperability. Refer to the IBM Interoperability Matrices of DS300, DS4000™, and DS5000 for storage interoperability guidance.

System name                  Machine type
 
IBM BladeCenter Chassis H       8852
IBM BladeCenter Chassis HT      8740, 8750 
Software requirements
  • Microsoft®
    • Windows® Server 2003 R2 Standard, Datacenter, Enterprise, Web x86 Edition
    • Windows Server 2003 R2 Standard, Datacenter, Enterprise, Web x64 Edition
    • Windows Server 2008 Standard, Datacenter, Enterprise, Web x86 Edition
    • Windows Server 2008 Standard, Datacenter, Enterprise, Web x64 Edition
  • Linux®
    • Red Hat Enterprise Linux (RHEL) 5 AS, ES for x86
    • Red Hat Enterprise Linux (RHEL) 5 AS, ES for AMD64/EM64T
    • SUSE Linux Enterprise Server 10 for x86 (SLES 10)
    • SUSE Linux Enterprise Server 10 for AMD64/EM64T (SLES 10)
    • SUSE Linux Enterprise Server 11 for x86 (SLES 11)
    • SUSE Linux Enterprise Server 11 for AMD64/EM64T (SLES 11)
Compatibility

Hardware environments: PCIe-compliant systems

For the latest compatibility information, visit

http://www.ibm.com/servers/eserver/serverproven/compat/us/

Note: Some configurations may not be compatible.

Limitations

None

Planning information

Additional cable orders required: No

Packaging

One box

Shipment group HBA
  • CNA Adapter
  • Support CD
  • Safety Flyer

Security, auditability, and control

This product uses the security and auditability features of the host hardware, software, and application software.

Terms and conditions

 
                          Terms and conditions
                        Features and options only
 
Field installable                   Yes
Customer setup                      Yes
 
Warranty period*                     1 year
Service type (CCE/CCR/CRU)           CRU(*) Tier 1
Maintenance agreement                No
Optional upgrade                     No
 
Licensed programs                    No

CRU Service:

IBM provides a replacement CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM at any time on your request. A CRU is designated as being either a Tier 1 (mandatory) or a Tier 2 (optional) CRU. Installation of a Tier 1 CRU is your responsibility. If IBM installs a Tier 1 CRU, at your request, you will be charged for the installation. You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge, under the type of warranty service specified below, On-site Service.

Based upon availability, a CRU will be shipped for next business day delivery. IBM specifies in the materials shipped with a replacement CRU whether a defective CRU must be returned to IBM. When return is required,

  1. Return instructions and a container are shipped with the replacement CRU, and
  2. You may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement.

The following has been designated as a Tier 1 CRU:

 
 QLogic 2-port 10Gb Converged Network Adapter (CFFh)   42C1832
 for IBM BladeCenter

Licensed Machine Code:

IBM Machine Code is licensed for use by a customer on the IBM machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and acquired by the customer. You can obtain the agreement by contacting your IBM representative or visiting

http://www-304.ibm.com/systems/support/machine_warranties/ machine_code.html

IBM may release changes to the Machine Code. IBM plans to make the Machine Code changes available for download from the IBM System x® technical support Web site:

http://www-304.ibm.com/systems/support/

If the machine does not function as warranted and your problem can be resolved through your application of downloadable Machine Code, you are responsible for downloading and installing these designated Machine Code changes as IBM specifies. If you would prefer, you may request IBM to install downloadable Machine Code changes; however, you may be charged for that service.

Note: Programs included with this product are licensed under the terms and conditions of the License Agreements that are shipped with the feature or option.

All other terms and conditions are the same as those applicable to the IBM machine type in which the feature is installed.

* To obtain copies of the IBM Statement of Limited Warranty, contact your reseller or call IBM.

In the United States, call 800-426-7378, or write to: Warranty Information, P.O. Box 12195, RTP, NC, 27709, Attn: Dept UF2A/B203.

Help and service information - Features and options

During the warranty period, support for a warranty related issue can be obtained by accessing IBM's online services (requires internet access account, not included) or calling the IBM Support Center 24 hours a day, 7 days a week, to answer any questions regarding your new IBM option. Response time will vary depending on the number and nature of calls received. If you need warranty service, return or exchange is available. In addition, if your IBM option is installed in an IBM computer, you may be entitled to service at your location. For general questions related to the use of your options, fee-based support is available. Your technical support representative can help you determine the best alternative.

Accessing IBM online services

Visit

http://www-03.ibm.com/servers/eserver/serverproven/ compat/us/
Placing the call to IBM

Within the United States, call the IBM Support Center at 800-426-7378.


 
Back to topBack to top
 
Top rule
Prices
Bottom rule

For current prices, contact IBM at 888-Shop-IBM (746-7426) or visit

http://www-03.ibm.com/systems/x
Options SEOs
                                       SEO
Description                            number     
 
QLogic 2-port 10Gb Converged           42C1830   
 Network Adapter (CFFh)
 for IBM BladeCenter

The following are newly announced features on the specified models of the IBM xSeries 7870 machine type:

                                                     Initial/
                                                     MES/
Description                  Model  Feature          Both     
                             number number           support   
 
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter
                              AC1      3592          Initial
                              MC1                    Initial

The following are newly announced features on the specified models of the IBM xSeries 7901 machine type:

                                                     Initial/
                                                     MES/
Description                  Model  Feature          Both     
                             number number           support   
 
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot
                              AC1      0077          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt
                              AC1      0078          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in BladeServer
                              AC1      0079          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl BladeServer
Slot
                              AC1      0080          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter
                              AC1      3592          Initial
                              MC1                    Initial

The following are newly announced features on the specified models of the IBM xSeries 7902 machine type:

                                                     Initial/
                                                     MES/
Description                  Model  Feature          Both     
                             number number           support  
 
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot
                              AC1      0077          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt
                              AC1      0078          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in BladeServer
                              AC1      0079          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl BladeServer
Slot
                              AC1      0080          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in MP Exp Unit
                              AC1      0083          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl MP Exp Slot
                              AC1      0084          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter
                              AC1      3592          Initial
                              MC1                    Initial

The following are newly announced features on the specified models of the IBM xSeries 7971 machine type:

                                                     Initial/
                                                     MES/
Description                  Model  Feature          Both     
                             number number           support   
 
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot
                              AC1      0077          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt
                              AC1      0078          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in BladeServer
                              AC1      0079          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl BladeServer
Slot
                              AC1      0080          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter
                              AC1      3592          Initial
                              MC1                    Initial

The following are newly announced features on the specified models of the IBM xSeries 7972 machine type:

                                                     Initial/
                                                     MES/
Description                  Model  Feature          Both     
                             number numbers          support   
 
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot
                              AC1      0077          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt
                              AC1      0078          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in BladeServer
                              AC1      0079          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl BladeServer
Slot
                              AC1      0080          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in MP Exp Unit
                              AC1      0083          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl MP Exp Slot
                              AC1      0084          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter
                              AC1      3592          Initial
                              MC1                    Initial

The following are newly announced features on the specified models of the IBM xSeries 7995 machine type:

                                                     Initial/
                                                     MES/
Description                  Model  Feature Purchase Both       
                             number number  Price    support  
 
QLogic 2-pt 10Gb CNA (CFFh) in Exp Slot
                              AC1      0073          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl Exp Slot
                              AC1      0074          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot
                              AC1      0077          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt
                              AC1      0078          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter
                              AC1      3592          Initial
                              MC1                    Initial

The following are newly announced features on the specified models of the IBM xSeries 8014 machine type:

                                                     Initial/
                                                     MES/
Description                  Model  Feature          Both        
                             number number           support   
 
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter
                              AC1      3592          Initial
                              MC1                    Initial

The following are newly announced features on the specified models of the IBM xSeries 8028 machine type:

                                                     Initial/
                                                     MES/
Description                  Model  Feature          Both      
                             number number           support   
 
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter
                              AC1      3592          Initial
                              MC1                    Initial

The following are newly announced features on the specified models of the IBM xSeries 8853 machine type:

                                                     Initial/
                                                     MES/
Description                  Model  Feature          Both      
                             number number           support   
 
QLogic 2-pt 10Gb CNA (CFFh) in Exp Slot
                              AC1      0073          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl Exp Slot
                              AC1      0074          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in 2nd Exp Slot
                              AC1      0075          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl 2nd Exp Slot
                              AC1      0076          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in Stor I/O Rear Slot
                              AC1      0077          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb CNA (CFFh) in addl Stor I/O Rear
Slt
                              AC1      0078          Initial
                              MC1                    Initial
QLogic 2-pt 10Gb Converged Network Adapter (CFFh)
for IBM BladeCenter
                              AC1      3592          Initial
                              MC1                    Initial
Trademarks

DS4000 is a trademark of IBM Corporation in the United States, other countries, or both.

IBM, BladeCenter, Wake on LAN, ServicePac, xSeries, ServerProven and System x are registered trademarks of IBM Corporation in the United States, other countries, or both.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States, other countries, or both.

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at

http://www.ibm.com/legal/us/en/

For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page

http://www.ibm.com/planetwide/us/

 

Back to topBack to top
 
Bottom grey rule
 
Printable version Printable version