IBM z/VM V5.3 — Improving scalability, security, and virtualization technology
IBM United States
Software Announcement 207-019
February 6, 2007
 ENUS207019.PDF (169KB)
|
(Corrected on April 25, 2007)
The Overview and Description sections were revised to reflect significant improvements in the amount
of memory, both real and virtual, that is supported by z/VM V5.3.
(Corrected on February 10, 2007)
The Virtualization technology and Linux enablement section of the Description section was revised.
z/VM V5.3 is designed to offer:
-
Improved memory utilization to help relieve storage constraints
-
Guest support enhancements, including a z/OS testing environment for the simulation of zAAP and zIIP
specialty processors
-
Comprehensive security with a new LDAP server and RACF feature, including support for password
phrases
-
Delivery of RSCS FL530 as a priced, optional IPLA feature
-
Enhancements to help improve the ease-of-use of virtual networks
-
Further exploitation of IBM System and Tape Storage devices
-
Management enhancements for Linux and other virtual images
For ordering, contact:
Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at
800-IBM-CALL
(Reference: LE001).
Back to top
With z/VM® V5.3, improvements to scalability, security, and virtualization technology can help
support increased workloads on IBM System z9™ and zSeries® servers and enhance its security
characteristics.
z/VM V5.3 provides support for larger logical partitions (LPARs) to improve scalability and to
facilitate growth. A single z/VM partition can be configured with up to 256 GB of real storage
(memory), twice the size supported by the previous release, and up to 32 Processor Units (PUs), a
33% increase over the previous release. The PUs may be:
-
Central Processor (CP)
-
System z™ Application Assist Processor (zAAP)
-
System z9 Integrated Information Processor (zIIP)
-
Integrated Facility for Linux™ (IFL)
z/VM V5.3 and Linux on System z collaborate to make more informed choices about how memory is
managed. This level of cooperation can allow z/VM to run more virtual servers in the same amount of
memory.
This new release provides an increased focus on security capabilities with the introduction of an
LDAP server and client services for a more comprehensive security solution on z/VM. Security is
also enhanced to support the use of password phrases in z/VM through a new RACF® feature, more
security-rich TCP/IP sessions, and enhanced data protection by exploiting drive-based data
encryption of the IBM System Storage™ TS1120 Tape Drive.
z/VM V5.3 extends its world-class virtualization technology by providing guest support for zAAPs and
zIIPs, the Modified Indirect Data Address Word (MIDAW) facility, and ASCII consoles. Manageability,
reliability, and usability of virtual networks have also been improved.
The z/VM hypervisor is designed to help clients extend the business value of mainframe technology
across the enterprise by integrating applications and data while providing exceptional levels of
availability, security, and operational ease. z/VM virtualization technology is designed to allow
the capability for clients to run hundreds to thousands of Linux servers on a single mainframe
running with other System z operating systems, such as z/OS®, or as a large-scale Linux-only
enterprise server solution. z/VM V5.3 can also help to improve productivity by hosting non-Linux
workloads such as z/OS, z/VSE®, and z/TPF.
For the most current information on z/VM, refer to the z/VM Web site at
Back to top
Refer to the
Hardware requirements
and
Software requirements
sections for details.
Back to top
June 29, 2007
Back to top
Improved scalability and constraint relief
Support for up to 256 GB of real storage (memory)
Changes to page table allocation in z/VM V5.3 allow z/VM to support significantly more real memory,
up to 256 GB, twice the size supported by z/VM V5.2, with up to 8 terabytes (TB) of total virtual
memory in use by guests. The actual amount of usable real and virtual memory is dependent on the
amount of real memory in the z/VM logical partition, on the hardware server model, firmware level,
and configuration, and on the number of guests and their workload characteristics. This can benefit
customers with large amounts of real memory, and may help reduce or eliminate the need to spread
large workloads across multiple z/VM LPARs. Enhancements to the management of contiguous frames may
also reduce memory management overhead and improve performance. Better z/VM management of real
memory can benefit most customers who experience memory constraints, regardless of the amount of
central memory configured for z/VM use.
For specific information on the effect of these changes and on the new upper bound of real memory
supported, refer to the z/VM V5.3
Performance Report
, planned to be available on June 29, 2007.
Up to 32 real processors in a single z/VM image
z/VM V5.3 can support customer growth by allowing up to 32 real processors in a single z/VM image on
an IBM System z server, an increase of 33% from the prior maximum of 24. The particular workload
will influence the efficiency with which a z/VM system can use large numbers of processors.
Generally, z/VM overhead is expected to be lower with fewer, more CPU-intensive guests than with
many lightly loaded guests.
For further considerations on performance in a large-scale multiprocessing environment, refer to the
z/VM V5.3: Migration Guide
(GC24-6103) and the z/VM V5.3
Performance Report,
both of which are planned to be available on June 29, 2007.
Enhanced memory management for Linux guests
z/VM V5.3 adds support for the Collaborative Memory Management Assist (CMMA) on the z9 EC and the z9
BC processors. This VM support, in conjunction with CMMA exploitation in guest operating systems
such as Linux for System z, allows the z/VM V5.3 Control Program (CP) host and its guests to
communicate attributes for specific 4K-byte blocks of guest memory. This exchange of information
can allow both the z/VM host and its guests to optimize their use and management of memory, in the
following ways:
-
CP knows when a Linux application releases storage and can select those pages for removal at a
higher priority or reclaim the page frames without the overhead of paging-out their data content to
expanded storage or disk.
-
CP recognizes clean disk cache pages, the contents of which Linux is able to reconstruct, allowing
CP to bypass paging-out the data contents when reclaiming the backing frames for these pages. If
Linux or its application subsequently tries to refer to the discarded page, Linux is notified that
the page has been discarded and can reread the contents from disk or otherwise reconstruct them.
-
The guest further benefits from the Host Page-Management Assist (HPMA) announced in Hardware
Announcement
105-241
, dated July 27, 2005. In conjunction with CMMA, HPMA allows the machine to supply fresh
backing page frames for guest memory when the guest reuses a previously discarded page, eliminating
the need for the z/VM hypervisor to intercept and resolve these host page faults.
z/VM 5.3 is the delivery vehicle for providing enhanced memory management support on z/VM. This
satisfies the statement of direction made in Software Announcement
205-168
, dated July 27, 2005.
Refer to the Preventive Service Planning (PSP) bucket for your z9 EC or z9 BC server for required
updates. To avoid system outages, required minimum MCL levels must be applied prior to IPLing z/VM
V5.3 and exploiting new functions. The PSP buckets can be found on Resource Link™ at
IBM is working with its Linux distribution partners to provide CMMA
exploitation in future Linux for System z distributions or service
updates.
Enhanced memory utilization using VMRM between z/VM and Linux guests
Virtual Machine Resource Manager (VMRM) assists in managing memory
contention in the z/VM system. Based on CP monitor data, the z/VM V5.3
VMRM detects when memory is constrained and notifies the Linux guests.
These guests can then take action to adjust their memory consumption to
help relieve the memory constraint, such as by releasing pages containing
the least recently referenced file cache data. The installation controls
which guests are notified.
For additional information on VMRM memory management, including
availability of the required Linux support, refer to the z/VM Web site at
HyperPAV support for IBM System Storage DS8000
z/VM V5.3 supports the Hyper Parallel Access Volume (HyperPAV) function
optionally provided by the IBM System Storage DS8000 disk storage
systems. HyperPAV support complements the existing basic PAV support in
z/VM V5.2, for applicable supporting disk storage systems. The HyperPAV
function potentially reduces the number of alias-device addresses needed
for parallel I/O operations since HyperPAVs are dynamically bound to a
base device for each I/O operation instead of being bound statically like
basic PAVs. z/VM provides support of HyperPAV volumes as linkable
minidisks for guest operating systems, such as z/OS, that exploit the
HyperPAV architecture. This support is also designed to transparently
provide the potential benefits of HyperPAV volumes for minidisks owned or
shared by guests that do not specifically exploit HyperPAV volumes, such
as Linux and CMS.
Enhanced FlashCopy® support
z/VM V5.3 support for the FlashCopy V2 feature of IBM System Storage disk
storage devices has been enhanced to simplify the tasks required to
automate backups. This includes the capabilities to:
-
Specify multiple target minidisks
The CP FLASHCOPY command can now accept up to 12 target minidisks to be
copied.
-
Determine the status of FlashCopy requests
The new CP QUERY Virtual FLASHCOPY command allows the user to query the
number of FlashCopy relationships active for one or more of their virtual
DASD.
-
Exploit hardware asynchronous cache destage and discard
This is designed to eliminate delayed hardware response messages and
provides quicker responses to the CP FLASHCOPY command. This makes the
FlashCopy appear synchronous to the virtual machine and may simplify
automating processes that exploit this technology.
In addition, z/VM has reduced the number of FlashCopy hardware-related
error conditions that can be reflected to the guest for the z/VM
FLASHCOPY command. z/VM will attempt to redrive the I/O on some error
conditions before reflecting the command response back to the guest.
Virtualization technology and Linux enablement
Support for IBM System z specialty engines (processors)
Integrated Facility for Linux (IFL) processors are dedicated to Linux workloads. IFLs enable you to
purchase additional processing capacity exclusively for Linux workloads, without affecting the MSU
rating or the IBM System z model designation. This means that acquiring an IFL will not necessarily
increase charges for IBM System z software running on general-purpose (standard) processors in the
server. IFLs were first introduced in Software Announcement
201-163
, dated May 29, 2001.
System z Application Assist Processors (zAAPs) are attractively priced specialized processors that
provide an economical Java™ execution environment under z/OS and z/OS.e on the System z platform.
zAAPs were announced in Hardware Announcement
104-118
, dated April 7, 2004.
System z9 Integrated Information Processors (zIIPs) are the latest specialty processors, designed to
help improve resource optimization and lower the cost for eligible workloads. z/OS and z/OS.e
exploit zIIPs to offload software system overhead from standard Central Processors (CPs). This
includes certain DB2® processing, enhancing the role of the mainframe as the data hub of the
enterprise. zIIPs were announced in Hardware Announcements
106-287
and
106-293
, dated April 27, 2006.
z/VM V5.3 is designed to provide new guest support for zAAPs and zIIPs and includes:
-
Simulation support — z/VM simulates specialty processors for guest virtual machines by dispatching
the virtual specialty processors on real CPs. Simulating specialty processors provides a test
platform for z/VM guests to exploit mixed-processor configurations. This allows users to assess the
operational and CPU utilization implications of configuring a z/OS system with zIIP or zAAP
processors without requiring the real specialty processor hardware. This simulation also supports
z/VM's continuing role as a disaster-recovery platform, since a virtual configuration can be defined
to match the real hardware configuration even when real zIIP or zAAP processors are not available on
the recovery system. z/VM simulates specialty processors using real CPs if the underlying hardware
is capable of supporting the real specialty processor. zIIPs can be simulated only on System z9 (z9
EC and z9 BC) servers. zAAPs can be simulated only on z9 EC, z9 BC, z990, and z890 servers.
-
Virtualization support — z/VM can create virtual specialty processors for virtual machines by
dispatching the virtual processors on corresponding specialty processors of the same type in the
real configuration. Guest support for zAAPs and zIIPs may help improve your total cost of ownership
by allowing available zAAP and zIIP capacity not being used by z/OS LPARs to be allocated to a z/VM
LPAR hosting z/OS guests running Java and DB2 workloads. zAAPs and zIIPs cost less than standard
CPs, so this support might enable you to avoid purchasing additional CPs, thereby helping to reduce
your costs both for additional hardware and for software licensing fees.
Enhanced VSWITCH and guest LAN usability
z/VM V5.3 provides usability enhancements for the virtual switch (VSWITCH) and guest-LAN
environments including:
-
Enhanced ease-of-use for Virtual LAN (VLAN) and promiscuous mode configuration changes
Changes to the authorized VLAN ID (VID) set and to promiscuous mode authorization are now effective
immediately instead of requiring a revoke, a grant, and an uncouple/couple in order for the changes
to take effect.
-
New capability to configure a native VLAN ID
This support provides the ability to specify a native VLAN identifier for untagged traffic and a
default VLAN identifier for guest ports. The DEFINE VSWITCH command now supports the specification
of a native VLAN identifier.
-
New virtual NIC monitor domain
Existing counts maintained for the virtual NIC, such as inbound packets, outbound bytes, and frame
counts per MAC/VLAN, are now included in records in a new Virtual Network monitor domain. These new
monitor records provide data for a virtual NIC that is coupled to any guest LAN or VSWITCH.
Modified Indirect Data Address Words (MIDAWs) for guests
z/VM V5.3 supports guest use of MIDAWs, which is a hardware feature available on the IBM System z9.
MIDAWs can allow more flexibility and performance in certain channel programs as an alternative to
data-chained channel-command words (CCWs). MIDAWs accommodate noncontiguous data areas that cannot
be handled by the predecessor indirect-data-address words (IDAWs). z/VM support for guest use of
MIDAWs can allow operating systems such as z/OS to use this new aspect of z/Architecture™ without
regard to whether the operating systems are running in a logical partition or a virtual machine.
This allows guest operating systems to exercise their code-paths just as they would on the real
machine during, for example, preproduction testing of z/OS systems. Likewise, the provision of the
function in a virtual machine allows guest operating systems to benefit from the real machine's
added-value function just as though the guests were running directly on the machine.
Guest ASCII console support
The system ASCII console is a facility that comes with all System z models and is presented by the
Hardware Management Console (HMC). z/VM V5.3 provides guest access to the system ASCII console. By
dedicating the system ASCII console to a Linux guest, customers can facilitate recovery of the guest
during an emergency situation, using an environment that provides tools (such as vi and emacs) that
are familiar to Linux support staff. This can be particularly useful when normal network access to
a guest operating system is not available. The system ASCII console (and hence the guest ASCII
console) supports a VT220 data stream.
This function can help lower system costs by helping to reduce the need to provide alternative
facilities, such as duplicate network resources, to achieve desired guest-recoverability
characteristics. Since this function provides guest access to the one system ASCII console by one
guest at a time, use of the console can be transferred from guest to guest as required.
Enhanced SCSI support
z/VM V5.3 provides additional enhancements for Small Computer System Interface (SCSI) disk support
for Linux users, including:
-
Point-to-Point Fibre Channel links, which may provide a lower-cost installation than the current
requirement for a Fibre Channel switched fabric
-
Dynamically determined preferred paths for emulated FBA devices (EDEVICEs) on SCSI disks in an IBM
System Storage DS6000, instead of the current need to specify which paths are preferred in a SET
EDEVICE command or an EDEVICE configuration-file statement
-
Faster formatting of emulated FBA devices (EDEVICEs) on SCSI disks in an IBM Enterprise Storage
Server™ (ESS) or IBM System Storage DS8000
-
Display of additional SCSI device characteristics when using the QUERY EDEVICE DETAILS command
-
Checking for erroneous mapping of multiple emulated-device (EDEVICE) definitions onto the same SCSI
disk when bringing emulated disks online
Network virtualization
Improved virtual network management
z/VM V5.3 helps network administrators manage virtual network performance, find and solve virtual
network problems, and plan virtual network growth. z/VM V5.3 establishes a method for providing
Simple Network Management Protocol (SNMP) data for virtual networking devices. Specifically, it
provides a SNMP subagent that runs in a separate virtual machine from the SNMP agent and extends the
functionality of the agent by supporting a specific set of Management Information Base (MIB)
variables. A preconfigured subagent and exit routine are provided in z/VM V5.3 to supply bridge
Management Information Base (BRIDGE-MIB) data, as documented in RFC 1493, for the z/VM Virtual
Switch (VSWITCH). This subagent, through the use of a Network Management System client, can acquire
BRIDGE-MIB data for the z/VM virtual switch. In addition, this support provides a programming
interface to obtain information about virtual networks.
Enhanced failover support for IPv4 and IPv6 devices
Failover support for Internet Protocol version 4 (IPv4) and Internet Protocol version 6 (IPv6)
devices has been improved in z/VM V5.3. When the z/VM TCP/IP stack has two (or more) Queued Direct
Input/Output (QDIO) or LAN Channel Station (LCS) Ethernet devices on the same network and one device
is stopped or fails, another device takes over responsibility for traffic destined for the failing
device (or any devices the failing device had previously taken over). This failover support
includes OSA-Express devices (in QDIO Ethernet or LCS Ethernet mode), Virtual IP Addresses (VIPAs),
and addresses for which PROXYARP services are being provided through a takeover-eligible device. In
addition to the basic failover support, one takeover-eligible device on that network will be
responsible for informing other nodes on that network which hardware (MAC) address should be used to
reach VIPA addresses on the TCP/IP stack, both when the stack initializes and when an IP takeover
event occurs.
Virtual IP Address (VIPA) support for IPv6
Virtual IP address support in the TCP/IP stack has been extended in z/VM V5.3 to support IPv6
addresses. It is now possible to enable and configure a virtual device for IPv6, as well as to
associate real IPv6-capable network adapters with a specific IPv6 virtual link for determining the
source address used in outgoing packets. VIPA support is designed to improve the capability of the
TCP/IP stack to maintain connections in the event that a real network device fails.
Security
Delivery of LDAP server and client
z/VM V5.3 introduces new user authentication, authorization, and auditing capabilities with the
inclusion of an LDAP server and associated client utilities. The z/VM LDAP server has been adapted
from the IBM Tivoli® Directory Server for z/OS, to be delivered in z/OS V1.8. Executing in a CMS
virtual machine, LDAP is integrated in the base of z/VM V5.3 as a subcomponent of TCP/IP. The z/VM
LDAP server provides:
-
Multiple concurrent database instances (referred to as backends)
-
Interoperability with LDAP V2 or V3 protocol-capable clients
-
LDAP Version 2 and Version 3 protocol support
-
Native authentication using Challenge-Response Authentication Method (CRAM-MD5), DIGEST-MD5
authentication, and Simple (unencrypted) authentication
-
Root DSE information master/slave and peer-to-peer replication
-
The ability to refer clients to additional directory servers
-
The capability to create an alias entry in the directory to point to another entry in the directory
-
Access controls on directory information
-
Change logging
-
Schema publication and update
-
SSL communication (SSL V3 and TLS V1)
-
Client and server authentication using SSL/TLS
The LDAP client utilities provide a way to add, modify, search, and delete entries in any server
that accepts LDAP protocol requests.
For more details on what functions have been implemented in the initial version of the z/VM LDAP
server, refer to the
z/VM: TCP/IP LDAP Administration Guide
(SC24-6140).
The new RACF Security Server for z/VM feature, available with z/VM V5.3, has also been updated to
interoperate with the new z/VM LDAP server.
Enhanced system security with longer passwords
Working together, z/VM V5.3 and the RACF Security Server for z/VM FL530 feature support the use of
passwords that are longer than eight characters, called password phrases (also known as
passphrases). A password phrase may contain mixed-case letters, numbers, blanks, and special
characters, allowing for an exponentially greater number of possible combinations of characters than
traditional passwords.
To utilize password phrases, an External Security Manager (ESM) that supports password phrases, such
as RACF, is required. To ease migration from passwords to password phrases, the RACF Security
Server for z/VM continues to support traditional 8-character passwords.
A new Callable Services Library (CSL) routine, DMSPASS, allows authorized CMS applications to
authenticate passwords or password phrases. The z/VM LOGON command, the z/VM TCP/IP File Transfer
Protocol (FTP), Systems Management API, Remote Execution Protocol (REXEC), and Internet Message
Access Protocol (IMAP) servers, and the Performance Toolkit for VM have been updated to support
password phrases.
For environments in which password phrases cannot be used, but where additional password complexity
is required, the RACF Security Server for z/VM also provides support for mixed-case 8-character
passwords.
Support for password phrases and mixed-case passwords enables a z/VM system to meet the enterprise
password requirements imposed by many companies, governments, and institutions.
Conformance with industry standards
z/VM V5.3 adds Secure Sockets Layer/Transport Layer Security (SSL/TLS) support for industry-standard
secure FTP (RFC 4217), Telnet (draft specification #6), and SMTP (RFC 3207) sessions. This support
includes new socket APIs to permit a Pascal or Assembler client or server application to control the
acceptance and establishment of TCP sessions that are encrypted with SSL/TLS. Data transmission on
a connection can now begin in clear text and at some later point be made available in secure text,
thus helping to reduce the need to dedicate a separate port for secure connections.
In order to enable enforcement of enterprise requirements for strong encryption on network
connections (128 bits or higher), the z/VM SSL server has been enhanced to more easily allow weak
cipher suites to be excluded.
SSL server enhancements
Previous releases of z/VM provided Red Hat Package Manager (RPM) packages for various Linux
distributions. z/VM V5.3 supports:
-
Novell SUSE Linux Enterprise Server (SLES) 9 Service Pack 3 (64-bit)
-
Novell SUSE Linux Enterprise Server (SLES) 9 Service Pack 3 (31-bit)
-
Red Hat Enterprise Linux (RHEL) AS 4 Update 4 (64-bit)
-
Red Hat Enterprise Linux (RHEL) AS 4 Update 4 (31-bit)
The z/VM SSL server has been enhanced to allow the host Linux guest system to remain active after a
critical error is encountered during server operations.
Also, the SSLADMIN command has been enhanced to:
-
Allow the specification of the number of days that a self-signed certificate is to be valid
-
Improve the management of the SSL server LOG files, by providing the ability to:
-
Maintain log information in a file named other than SSLADMIN LOG
-
Specify a maximum size to be established for the SSL server log
-
Purge log information accumulated by the SSL server
Tape data protection with support for encryption
z/VM now supports drive-based data encryption with the IBM System Storage TS1120 Tape Drive (machine
type 3592, model E05). The TS1120's encryption capability and its subsystem-integration support
provide a flexible tape-data-encryption solution that provides data encryption and key management
across a variety of environments with a single point of control for all encryption keys. Most
importantly, this solution can help protect data on tape in a cost-effective way.
Encryption of tapes by z/VM itself requires that the IBM Encryption Key Manager be running on
another operating system, using an out-of-band (such as TCP/IP) connection to the tape control unit.
z/VM native support includes encryption for DDR and SPXTAPE, as well as transparent support for
guests that do not provide for their own encryption (for example, CMS and Linux for System z).
z/VM also enables encryption of tapes by guests (such as z/OS) that have the ability to control the
tape-encryption facilities themselves and to optionally run the Encryption Key Manager. Key
management for such guests can use either an out-of-band or an in-band (such as an ESCON® or
FICON™ channel) connection between the Encryption Key Manager and the tape control unit. With the
PTF for APAR VM64063 for z/VM V5.1 and V5.2, only the Encryption Key Manager's default keys are
supported for use by z/VM and by guests that do not provide for their own encryption. z/VM V5.3
expands this support to allow any key label to be used, with key labels being accessible through a
key alias that is defined to z/VM.
DFSMS/VM® FL221 with the PTF for APAR VM64062 supports locating encryption-capable 3592 tape
drives in an Enterprise Automated Tape Library. This DFSMS/VM support provides tape-encryption
capabilities for a z/VSE guest running on z/VM.
For additional information on the IBM System Storage TS1120 Tape Drive encryption support, refer to
Hardware Announcement
106-655
, dated August 29, 2006.
Systems management
Enhanced management functions for Linux and other virtual images
The z/VM Virtual Systems Management Application Programming Interface (API), first introduced in
z/VM V4.4, is provided for System z platform provisioning applications (such as IBM Director and
programs developed by non-IBM solution providers) for ease of use in creating and managing large
numbers of Linux and other virtual images running on z/VM.
With z/VM V5.3, a new sockets-based server supports the z/VM Virtual Systems Management API. The
sockets-based server is multitasking-capable and supports both AF_INET and AF_IUCV socket requests.
In addition to the new server, enhancements provided in z/VM V5.3 include:
-
New functions to:
-
Create, delete, and query the IPL statement in a virtual image's directory entry
-
Create and delete virtual switches and guest LANs
-
Obtain processor, memory, and device information for active virtual images
-
Check the validity of a given user ID/password (or passphrase) combination
-
Enhancements to existing functions to:
-
Provide values of specific attributes for selected query functions, rather than return a buffer
containing QUERY command output
-
Exploit the new Asynchronous CP Command function available in z/VM V5.3
-
Accept passphrases and forward them to the external security manager to be set, changed, or deleted
-
Provide a list of active virtual images
The new and enhanced API functions for z/VM V5.3 have been implemented using the new sockets-based
server. Functions provided in earlier releases of z/VM can also be invoked through the new server.
The sockets-based server replaces the Remote Procedure Call (RPC) server and CSL routines that were
used to call the Virtual Systems Management API in previous releases of z/VM. The RPC server is
still available in z/VM V5.3, with all of the functions that were available in z/VM V5.2. However,
the enhancements provided in z/VM V5.3 are not available through the RPC server, for which no future
enhancements are planned. Documentation on the use of the API with the RPC server and CSL routines
will not be updated and will not be included in the V5.3 bookshelf. IBM intends to remove the RPC
server from a future z/VM release.
New function level for DirMaint™
The priced, optional feature of the IBM Directory Maintenance Facility (DirMaint) has been upgraded
to a new function level (FL530) in z/VM V5.3. In addition to all service being applied since FL510,
Directory Maintenance Facility FL530 includes:
-
Supporting new and changed directory statements in z/VM V5.3
-
Eliminating indefinite wait times when a DATAMOVE machine cannot access all required resources for a
DASD management function
-
Providing more detailed information about the causes of errors returned from the Systems Management
API
Enhancements to the Performance Toolkit
In addition to being upgraded to a new function level (FL530), the Performance Toolkit for VM
feature has been enhanced for z/VM V5.3 to:
-
Support passphrases when accessing the Performance Toolkit using the Web interface
-
Change the service process for Performance Toolkit from a full-part replacement MODULE to service by
individual object parts, reducing the size of the service deliverable
-
Provide new or updated displays and reports to support the following new z/VM V5.3 functions:
-
Linux monitor data for virtual CPUs and steal time counters
-
Monitor data for virtual network devices and virtual switches
-
Monitor data for guest simulation of zAAPs, zIIPs, and IFLs
-
Monitor data for up to 32 processors in a z/VM image
Enhanced guest configuration
z/VM V5.3 helps improve the guest LOGON process by providing a new COMMAND statement in a virtual
machine definition or profile to configure the virtual machine. Any form of a CP command may be
invoked using this capability, including privileged class commands (such as SET RESERVED), on behalf
of the virtual machine, eliminating the need to provide some other method to configure it.
Installation, service, and packaging changes
Additional DVD installation options
z/VM V5.3 provides some additional capabilities for installing z/VM from DVD. The second-level DVD
installation process now supports moving the contents to an FTP server directory or a second-level
CMS minidisk and then installing from the server or minidisk. This provides more options for
customer environments and can facilitate electronic delivery of z/VM.
Enhanced status information
The automated service command, SERVICE, has been enhanced to display the service and production
levels for preventive service (RSU) and displays an applied, built, and production status for
corrective service. This can provide a quicker and easier way to determine service status.
RSCS repackaged as an optional feature
Remote Spooling Communications Subsystem (RSCS) V3.2.0 (5684-096) has been repackaged and is now
available for licensing under International Program License Agreement (IPLA) terms and conditions.
RSCS Function Level 530 (FL530) is available as a priced, optional, preinstalled feature of
z/VM V5.3. Pricing is based on engine-based Value Units and is available for both IFL and standard
processor configurations. RSCS FL530 provides dynamic command authorization support through a new
server, RSCSAUTH, that runs as a disconnected z/VM server and is authorized for all RSCS commands.
This can eliminate the need to recycle RSCS when changing system and link authorizations.
RSCS is a z/VM networking program. It provides data file transfer and print services to, from, and
through the z/VM system on which it runs using both its own and TCP/IP networks. It extends the
scope of a single system to an entire network of computers and devices. RSCS transfers data (as
spool files) between its local system and remote devices and printers or other systems. It also
acts as a print server for remote printers attached to other VM systems or a TCP/IP network.
Through RSCS, users can send and receive messages, files, commands, and print and submit jobs within
their network.
The stand-alone RSCS V3.2.0 (5684-096) product is planned to be withdrawn from marketing effective
September 30, 2007.
New RACF Security Server for z/VM
With z/VM V5.3, the stand-alone RACF for VM V1.10.0 (5740-XXH) product has been repackaged with new
function added and is now called the RACF Security Server for z/VM FL530 feature. It is a priced,
optional feature and will operate only with z/VM V5.3.
The new RACF Security Server feature includes support for mixed-case passwords and password phrases.
A password phrase is a string of up to 100 characters, including blanks, and can be used in addition
to, or in place of, the traditional 8-character password. An installation exit is provided to help
enable customers to define rules governing the length and content of password phrases.
Additional password management enhancements have been added, including:
-
Validation of a password and password phrase using Diagnose X'88' and the new DMSPASS CSL routine
-
Operation with the new industry-standard LDAP server included in z/VM V5.3 to enable remote
management of passwords and selected user attributes, and to enable remote applications to perform
authorization and auditing using RACF for z/VM
-
Access by password phrase, allowing the removal of the 8-character password from a user ID
-
Enhanced security of password reset operations, which now removes the password completely, rather
than resetting the user password to the default group name, as in prior releases
-
Adding the user's password to the password history list when the password is reset by an
administrator
-
Providing the capability for passwords to be set by administrators or authorized password management
applications without the need for the user to immediately change the password on its first use,
improving the auditing of password changes
To simplify analysis of the security audit trail, the RACF SMF Unload utility has been updated to
store the unloaded data in industry-standard XML format, making it suitable to be examined by a
variety of applications, including XML browsers and spreadsheets.
This new feature will be the base for all future RACF enhancements on z/VM and works with the
existing functions and features of z/VM to provide improved discretionary and mandatory access
controls, separation of duties, and auditability capabilities of z/VM.
IBM intends to withdraw the stand-alone RACF for VM V1.10.0 (5740-XXH) product from marketing on
March 5, 2007, as announced in Withdrawal Announcement
906-254
, dated December 5, 2006. IBM intends to discontinue service support for the stand-alone RACF
for VM V1.10.0 (5740-XXH) product to be effective May 5, 2008, as announced in Withdrawal
Announcement
907-023
, dated February 6, 2007.
U.S. Daylight Saving Time effect on z/VM
A provision of the U.S. Government's Energy Policy Act of 2005 and similar legislation enacted by
the governments of Canada and Bermuda extends Daylight Saving Time (DST) by four weeks, beginning in
2007. Starting in March 2007, Daylight Savings Time in the United States, Canada, and Bermuda
will begin on the second Sunday in March and end on the first Sunday in November.
New sample system configuration file statements will be shipped with z/VM V5.3. System programmers
should change the dates that are specified on TIMEZONE_BOUNDARY statements in the existing system
configuration files that their systems use.
For a complete description on the changes to Daylight Saving Time in 2007, refer to
The Language Environment® PTF for APAR VM64117 must be applied to z/VM
V5.1 and V5.2 and provides required changes for C/C++ library functions.
The PTF is integrated into z/VM V5.3.
If you observe DST, IBM recommends this PTF be installed and
applications restarted before March 11, 2007. For more
detailed information on how DST changes may affect your z/VM
installation, refer to the z/VM Web site at
z/Architecture CMS shipped as a sample program
z/Architecture CMS is shipped as a sample program with z/VM V5.3 with no
formal support available. This version of CMS runs in z/Architecture
31-bit addressing mode and enables the use of z/Architecture
instructions, including those that operate on 64-bit registers, by CMS
programs, while permitting most existing ESA/390-architecture CMS
programs to continue to function without change. z/Architecture CMS does
not exploit or explicitly support 64-bit addressing mode but it does not
impose serious restrictions on programs that enter 64-bit addressing mode
themselves. For additional z/Architecture CMS details and usage
restrictions, refer to the z/VM Web site at
Withdrawal of the ROUTED and BOOTP servers
The ROUTED and BOOTP servers have been removed from z/VM V5.3. This
satisfies the Statement of General Direction made in Software
Announcement
205-168
, dated July 27, 2005.
MPRoute is the only dynamic routing server supported by TCP/IP for z/VM
FL530.
Accessibility by people with disabilities
The following features support use by people with disabilities:
-
Operation by keyboard alone
-
Optional font enlargement and high-contrast display settings
-
Screen readers and screen magnifiers tested for use by people with visual impairment
Engine-based Value Unit pricing
Engine-based Value Unit pricing for z/VM V5.3 is designed to provide a decreasing price curve as
hardware capacities and workload grow, which may help improve price/performance.
There may also be a price benefit when you grow your capacity. Additional capacity is not priced
starting at the base with a flat price per unit. Instead, additional capacity is priced starting at
the capacity (processors) on which z/VM V5 has already been installed, which may result in a lower
unit price.
Note:
Value Units of a given product cannot be exchanged, interchanged, or aggregated with Value Units of
another product.
A no-charge Subscription and Support registration record will be established for each designated
machine where z/VM V5.3 and the priced, optional features of DirMaint, RSCS, RACF Security Server,
and the Performance Toolkit for VM are running. These no-charge Subscription and Support
registration records will be linked to the billable Subscription and Support and all billable
Subscription and Support within the scope of the engine-based Value Units aggregation will be linked
together.
Subscription and Support is an annual charge and should be kept at an annual term.
Back to top
The Information Technology industry has recognized the business value of exploiting virtualization
technologies on any and all server platforms. IBM mainframe products have enjoyed high levels of
server virtualization technology for many years. z/VM V5.3 is the latest offering of
industry-acclaimed server virtualization support available for IBM System z. Building on a 40-year
history of innovation, z/VM is becoming an ever more popular component of on demand System z
computing solutions.
The success of Linux on System z can be largely attributed to the business value that Linux-based
solutions derive from the IBM mainframe virtualization technology provided by z/VM and IBM System z
servers. z/VM technology offers clients the ability to host a large number of Linux servers on a
single mainframe while also providing an operational environment that is well-suited for on demand
computing: highly flexible, adaptable, and efficient.
z/VM V5 offers new levels of price/performance, functional capabilities, and hardware exploitation
that are expected to increase the attractiveness of deploying Linux solutions on the mainframe.
Clients can add capacity to IBM mainframe servers for hosting Linux-on-z/VM workloads by configuring
their servers with Integrated Facility for Linux (IFL) processors.
The z/VM V5 pricing model can make it more feasible for clients to add z/VM virtualization
technology to their standard-processor environment (compared to the pricing models of z/VM V3 and
V4). This helps enable clients to use z/VM to host workloads that cannot run on IFL processors,
such as z/OS, z/OS.e, VSE/ESA™, z/VSE, TPF, or z/TPF, to consolidate existing VM/ESA® or z/VM V3
and V4 workloads onto a single larger System z server.
z/VM V5 is the follow-on product for VM/ESA, z/VM V3, and z/VM V4. z/VM V5 requires z/Architecture
(64-bit) for execution; therefore, it runs only on z9 EC, z9 BC, z990, z900, z890, and z800. z/VM
V5 provides additional support and exploitation opportunities for many users who have built
enterprise-wide automation and infrastructure enhancements on the VM platform in support of their
applications, database systems, and on demand business solutions.
z/VM V5 is intended to address the following situations:
-
Running more Linux server images on a single System z server. Considerably more images than are
currently supported by the LPAR mode of operation (up to 60 on z9 EC, up to 30 on z9 BC, z990, and
z890, and up to 15 on all other zSeries servers) can be achieved with z/VM guest support. These
Linux on System z server images can be deployed on standard processors (CPs) or IFL processors with
z/VM V5. Running multiple Linux images on an IFL-configured z/VM system may not increase the IBM
software charges of your existing System z9 or zSeries environment. z/OS, z/OS.e, z/VM, TPF, z/TPF,
VSE/ESA, z/VSE, or Linux clients can add z/VM V5 running on IFL processors to their environment
without increasing IBM software costs on the standard processors (CPs).
-
Moving selected Linux, Windows™, and UNIX® workloads to a single System z server while
maintaining distinct server images and current LAN topology. This ability can help reduce
systems-management complexity. Since the number of real hardware servers and associated physical
LANs is reduced, cost savings may be realized by managing large server farms deployed on virtual
servers instead of using multiple hardware servers. Deploying Linux workloads on z/VM V5 is
particularly attractive if they interact with applications or data located on the same System z
server.
-
Enhancing virtual networking. z/VM virtual switch support provides external connectivity for guest
LANs through an OSA-Express adapter without requiring a VM or Linux router virtual machine.
-
Consolidating operating systems on the System z platform. z/VM V5.3 can provide more constraint
relief than what was offered with z/VM V5.2. This constraint relief is provided for both ESA/390
and z/Architecture guest operating systems such as Linux for System z, TPF, z/TPF, z/OS, z/OS.e,
VSE/ESA, or z/VSE. z/VM V5.3 offers enhanced scalability support for CPUs, memory, I/O, and
networking, making it easier to consolidate workloads onto a single z/VM image.
-
Migrating from VM/ESA to z/VM V5. This helps enable:
-
More memory to cache CMS minidisks by exploiting memory above 2 GB for minidisk cache
-
Connectivity (TCP/IP) enhancements and additional device support
-
Added security capabilities with SSL-protected TCP/IP network traffic, such as Telnet sessions and
Web transactions
-
Migrating to supported releases of z/OS or z/OS.e using z/VM V5. This can provide added flexibility
for migration, production, and testing.
-
Enhancing guest Parallel Sysplex® support in z/VM with the exploitation of the z/Architecture.
This can enable addressability of larger amounts of real and virtual memory, allowing the
development and testing of 64-bit Parallel Sysplex applications in a guest environment.
Back to top
-
Common Criteria Certification:
IBM intends to evaluate z/VM V5.3 with the RACF Security Server optional feature for conformance to
the Controlled Access Protection Profile (CAPP) and Labeled Security Protection Profile (LSPP) of
the Common Criteria standard for IT security, ISO/IEC 15408, at Evaluation Assurance Level 4
(EAL4).
This new SOD represents a modification to IBM's previously expressed Statement of Direction of
July 27, 2005, which stated IBM's intent "to evaluate z/VM V5.2 with the RACF for z/VM
optional feature for conformance to the Controlled Access Protection Profile (CAPP) and Labeled
Security Protection Profile (LSPP) of the Common Criteria standard for IT security, ISO/IEC 15408,
at Evaluation Assurance Level 4 (EAL4)." Based on additional assessment of requirements, IBM
no longer intends to evaluate z/VM V5.2.
-
OSA-Express2 link aggregation and failover support:
IBM intends to provide virtual switch (VSWITCH) support for IEEE Standard 802.3ad Link Aggregation
in z/VM V5.3. This support is designed to allow all OSA-Express2 features that are associated with
a virtual switch to be grouped and used as a single "fat pipe," helping to increase bandwidth and
provide near-seamless failover in the event of a link failure. This z/VM support requires
associated OSA-Express2 support that is planned to be available on IBM System z9 servers.
-
RPC server support for the Systems Management API:
IBM intends to withdraw support for the RPC/CSL interface from the Systems Management API server in
a future z/VM release.
-
TCP/IP functions:
IBM intends to withdraw support for the Network Database (NDB) system, Trivial File Transfer
Protocol (TFTP) server, X25 interface (including the X25IBI server), and SNALINK server in a future
z/VM release.
-
3480 distribution medium:
IBM intends to withdraw 3480 tape as a distribution medium in a future z/VM release. IBM plans to
continue distributing z/VM on 3590 tape and on DVD, and making it available for electronic delivery
from ShopzSeries.
All statements regarding IBM's plans, directions, and intent are subject to change or withdrawal
without notice.
Back to top
For information on the z9 EC, refer to:
-
Hardware Announcement
106-715
, dated October 10, 2006
-
Hardware Announcement
106-293
, dated April 27, 2006
-
Hardware Announcement
105-241
, dated July 27, 2005
For information on the z9 BC, refer to:
-
Hardware Announcement
106-715
, dated October 10, 2006
-
Hardware Announcement
106-287
, dated April 27, 2006
For information on the zSeries 990, refer to:
-
Hardware Announcement
105-012
, dated January 25, 2005
-
Hardware Announcement
104-346
, dated October 7, 2004
-
Hardware Announcement
104-118
, dated April 7, 2004
-
Hardware Announcement
103-280
, dated October 7, 2003
-
Hardware Announcement
103-142
, dated May 13, 2003
For information on the zSeries 890, refer to:
-
Hardware Announcement
105-012
, dated January 25, 2005
-
Hardware Announcement
104-346
, dated October 7, 2004
-
Hardware Announcement
104-117
, dated April 7, 2004
For information on the zSeries 900, refer to:
-
Hardware Announcement
102-209
, dated August 13, 2002
-
Hardware Announcement
102-123
, dated April 30, 2002
-
Hardware Announcement
101-308
, dated October 4, 2001
-
Hardware Announcement
100-323
, dated October 3, 2000
For information on the zSeries 800, refer to:
-
Hardware Announcement
102-052
, dated February 19, 2002
For information on the zSeries Offering for Linux, refer to:
-
Hardware Announcement
102-030
, dated January 29, 2002
For z/VM capabilities, refer to:
-
z/VM V5.2 Software Announcement
206-084
, dated April 27, 2006
-
z/VM V5.2 Software Announcement
205-168
, dated July 27, 2005
-
z/VM V5.1 Software Announcement
204-235
, dated October 7, 2004
-
Software Announcement
204-057
, dated April 7, 2004
Availability of national languages
To receive the translated help files for DFSMS/VM in Kanji, you must order the no-charge optional
feature using the z/VM V5 System Delivery Option (SDO). You will also receive the base DFSMS/VM
feature when ordering the DFSMS/VM Kanji feature.
Business Partner information
If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to
Business Partner information for this announcement. A PartnerWorld ID and password are required
(use IBM ID).
BP Attachment for Announcement Letter 207-019
Trademarks
-
-
System z9, System z, System Storage, Resource Link, z/Architecture, Enterprise Storage Server,
FICON, DirMaint, and VSE/ESA are trademarks of International Business Machines Corporation in the
United States or other countries or both.
-
-
z/VM, zSeries, RACF, z/OS, z/VSE, FlashCopy, DB2, Tivoli, ESCON, DFSMS/VM, Language Environment,
VM/ESA, and Parallel Sysplex are registered trademarks of International Business Machines
Corporation in the United States or other countries or both.
-
-
Windows is a trademark of Microsoft Corporation.
-
-
Java is a trademark of Sun Microsystems, Inc.
-
-
UNIX is a registered trademark of the Open Company in the United States and other countries.
-
-
Linux is a trademark of Linus Torvalds in the United States, other countries or both.
-
-
Other company, product, and service names may be trademarks or service marks of others.
Back to top
IBM Training offers classroom training, e-learning, conferences, certification, course roadmaps, and
more. These publicly held or privately available courses are focused on z/VM® and Linux™ for
System z™. IBM Training also provides on-site training with customized content and course
materials for small or large groups.
The z/VM and Linux course catalog includes:
-
ZV02 —
z/VM Introduction and Concepts
(3 days)
-
ZV10 —
z/VM and Linux Connectivity and Management
(3.5 days)
-
ZV06 —
Installing, Configuring and Servicing z/VM for Linux Guests
(5 days)
-
ZV20 —
z/VM RACF® and DirMaint™ Implementation
(4.5 days)
The Linux course catalog includes:
-
ZL12 —
Linux Basics — A zSeries® Perspective
(2 days)
-
ZL10 —
Linux Implementation for zSeries
(3 days)
-
ZL15 —
Advanced Solutions for Linux on zSeries
(4 days)
For information on these courses or additional VM education, contact your local IBM Education
Services or call IBM Training at 800-IBM-TEACH (426-8322) for catalogs, schedules, and enrollments.
You may also visit the IBM Training Web site at
For z/VM and Linux education, select "Training Finder — US," then under
"Technology area," select "Mainframe servers," then under "Mainframe
servers," select "z/VM and Linux."
For Linux education, select "Training Finder — US," then under
"Technology area," select "Linux."
IBM IT Training offers various savings programs on IBM education. For
more information on the savings programs available in your country, visit
the IBM Training Web site at
Select "Training in other countries," then select "IBM Education Pack —
Save on Training," then select a country to view the various options.
Technical conferences
IBM Training offers public and private z/VM classes and annual technical conferences in Europe (in
the first half of the year) and in the United States (in the second half of the year).
The following System z technical conferences featuring z/OS®, z/VM, z/VSE® and Linux on System z
are scheduled for 2007:
For more information about IBM technical conferences, visit
Additional VM educational resources can be found on the z/VM Web site at
Back to top
Product information is available via the Offering Information Web site
Back to top
Unlicensed documentation
Unlicensed documents within the z/VM V5 library are available as Adobe PDF files, IBM BookManager®
files, or printed books.
Some publications identified as basic publications are automatically shipped in printed format, at
no additional charge, when you order the z/VM V5 base product.
The other publications are supplied only in PDF or BookManager format with z/VM V5. All z/VM
publications can also be obtained separately from z/VM (printed publications require payment of a
fee) using the specific publication numbers through the IBM Publications Center at
The Publications Center is a worldwide central repository for IBM product
publications and marketing material with a catalog of 70,000 items.
Extensive search facilities are provided. Payment options for orders are
via credit card (in the U.S.) or customer number for 50 countries. A
large number of publications are available online in various file
formats, and they can all be downloaded by all countries free of charge.
News of many publications may be subscribed to via Mysupport at
All publications updated for z/VM V5.3 are available as PDF files, which
may be printed.
Adobe PDF files
Publications that are available in PDF format (except for the
Guide for Automated Installation and Service
and the
License Information
document) are provided on the
IBM Online Library: z/VM Collection
CD-ROM and the
IBM Online Library: z/VM Collection on DVD
(both of which are supplied with z/VM V5.3, at no additional charge) and are available from the
Publications Center Web site at
Publications are also available from the IBM z/VM Internet Library at
You can view a PDF file using the Adobe Acrobat Reader, which is
available free from the Adobe Web site at
You can also print the entire publication or just the section in which
you are interested.
IBM BookManager files
Publications that are available in BookManager format are provided on the
IBM Online Library: z/VM Collection
CD-ROM and the
IBM Online Library: z/VM Collection on DVD
(both of which are supplied with z/VM V5.3, at no additional charge) and are available from the
Publications Center Web site at
Publications are also available from the IBM z/VM Internet Library at
The BookManager files can be read by either BookManager READ for VM (a
separately orderable product) or IBM Softcopy Reader (supplied on the
CD-ROM and DVD).
Printed books
All z/VM V5.3 basic publications are available as printed books and are orderable from the
Publications Center.
One copy of the basic z/VM V5.3 printed publications, and two copies of the z/VM V5.3 online
publications (one on CD-ROM and one on DVD), are supplied automatically with the basic
machine-readable material.
Publications changed for this announcement of enhancements for z/VM V5.3 are listed below. The
z/VM: General Information
publication is planned to be available on February 6, 2007. All other changed
publications are planned to be available from the Publications Center and the z/VM Internet Library
on June 29, 2007.
Basic z/VM V5.3 — New editions
Unlicensed documentation
Order Format
Title number PDF BKM Print
z/VM: Getting Started with Linux SC24-6096 X X X
on System z
z/VM: Guide for Automated GC24-6099 X X
Installation and Service
z/VM Summary for Automated Installation GA76-0406 X X
and Service (DVD Installation)
z/VM Summary for Automated Installation GA76-0407 X X
and Service (Tape Installation)
z/VM: License Information GC24-6102 X X
BKM = BookManager
Note:
An "X" in one of the columns indicates available formats.
z/VM V5.3 Base — New editions
Unlicensed documentation
Updated or new for z/VM V5.3:
Order Format
Title number PDF BKM Print
z/VM: CMS and REXX/VM Messages GC24-6118 X X
and Codes
z/VM: CMS Callable Services Reference SC24-6072 X X
z/VM: CMS Commands and Utilities SC24-6073 X X
Reference
z/VM: CMS Pipelines Reference SC24-6076 X X
z/VM: CMS User's Guide SC24-6079 X X
z/VM: Connectivity SC24-6080 X X
z/VM: CP Commands and Utilities SC24-6081 X X
Reference
z/VM: CP Messages and Codes GC24-6119 X X
z/VM: CP Planning and Administration SC24-6083 X X
z/VM: CP Programming Services SC24-6084 X X
z/VM: Diagnosis Guide GC24-6092 X X
z/VM: General Information GC24-6095 X X
z/VM: Group Control System SC24-6098 X X
z/VM: I/O Configuration SC24-6100 X X
z/VM: Migration Guide GC24-6103 X X
z/VM: Other Components Messages GC24-6120 X X
and Codes
z/VM: Performance SC24-6109 X X
z/VM: REXX/VM Reference SC24-6113 X X
z/VM: Running Guest Operating Systems SC24-6115 X X
z/VM: Service Guide GC24-6117 X X
z/VM: System Operation SC24-6121 X X
z/VM: Systems Management SC24-6122 X X
Application Programming
z/VM: TCP/IP Diagnosis Guide GC24-6123 X X
z/VM: TCP/IP LDAP Administration Guide SC24-6140 X X
z/VM: TCP/IP Messages and Codes GC24-6124 X X
z/VM: TCP/IP Planning and Customization SC24-6125 X X
z/VM: TCP/IP Programmer's Reference SC24-6126 X X
z/VM: TCP/IP User's Guide SC24-6127 X X
z/VM: VM Dump Tool GC24-6129 X X
z/VM: VMSES/E Introduction and Reference GC24-6130 X X
BKM = BookManager
Note:
An "X" in one of the columns indicates available formats.
z/VM V5.3 Base — Not new editions
Unlicensed documentation
Updated or new for z/VM V5.3:
Order Format
Title number PDF BKM Print
z/VM: CMS Application Development Guide SC24-6069 X X
z/VM: CMS Application Development Guide SC24-6070 X X
for Assembler
z/VM: CMS Application Multitasking SC24-6071 X X
z/VM: CMS File Pool Planning, SC24-6074 X X
Administration, and Operation
z/VM: CMS Macros and Functions Reference SC24-6075 X X
z/VM: CMS Pipelines User's Guide SC24-6077 X X
z/VM: CMS Planning and Administration SC24-6078 X X
z/VM: CMS Primer SC24-6137 X X X
z/VM: CP Exit Customization SC24-6082 X X
z/VM: CPI Communications User's Guide SC24-6085 X X
z/VM: Dump Viewing Facility GC24-6093 X X
z/VM: Enterprise Systems Architecture/ SC24-6094 X X
Extended Configuration Principles
of Operation
z/VM: Glossary GC24-6097 X X
z/VM: Language Environment(R) User's SC24-6101 X X
Guide
z/VM: OpenExtensions Advanced SC24-6104 X X
Application Programming Tools
z/VM: OpenExtensions Callable Services SC24-6105 X X
Reference
z/VM: OpenExtensions Commands Reference SC24-6106 X X
z/VM: OpenExtensions POSIX Conformance GC24-6107 X X
Document
z/VM: OpenExtensions User's Guide SC24-6108 X X
z/VM: Program Management Binder for CMS SC24-6110 X X
z/VM: Reusable Server Kernel SC24-6112 X X
Programmer's Guide and Reference
z/VM: REXX/VM User's Guide SC24-6114 X X
z/VM: Saved Segments Planning
and Administration SC24-6116 X X
z/VM: Virtual Machine Operation SC24-6128 X X
z/VM: XEDIT Commands and Macros Reference SC24-6131 X X
z/VM: XEDIT User's Guide SC24-6132 X X
BKM = BookManager
Note:
An "X" in one of the columns indicates available formats.
Optional RACF Security Server feature — New editions
Unlicensed documentation
New for z/VM V5.3:
Order Format
Title number PDF BKM Print
z/VM: Security Server SC24-6150 X X
RACROUTE Macro Reference
z/VM: RACF Security Server SC24-6142 X X
Administrator's Guide
z/VM: RACF Security Server SC24-6143 X X
Auditor's Guide
z/VM: RACF Security Server SC24-6144 X X
Command Language Reference
z/VM: RACF Security Server GC24-6145 X X
Diagnosis Guide
z/VM: RACF Security Server SC24-6146 X X
General User's Guide
z/VM: RACF Security Server SC24-6147 X X
Macros and Interfaces
z/VM: RACF Security Server GC24-6148 X X
Messages and Codes
z/VM: RACF Security Server SC24-6149 X X
System Programmer's Guide
BKM = BookManager
Note:
An "X" in one of the columns indicates available formats.
Optional RSCS feature — New editions
Unlicensed documentation
New for z/VM V5.3:
Order Format
Title number PDF BKM Print
z/VM: RSCS Networking Diagnosis GC24-6151 X X
z/VM: RSCS Networking Exit Customization SC24-6152 X X
z/VM: RSCS Networking Messages and Codes GC24-6153 X X
z/VM: RSCS Networking Operation and Use SC24-6154 X X
z/VM: RSCS Networking Planning SC24-6155 X X
and Configuration
BKM = BookManager
Note:
An "X" in one of the columns indicates available formats.
Optional Directory Maintenance Facility feature — New editions
Unlicensed documentation
Updated for z/VM V5.3:
Order Format
Title number PDF BKM Print
z/VM: Directory Maintenance Facility SC24-6133 X X
Commands Reference
z/VM: Directory Maintenance Facility GC24-6134 X X
Messages
z/VM: Directory Maintenance Facility SC24-6135 X X
Tailoring and Administration Guide
BKM = BookManager
Note:
An "X" in one of the columns indicates available formats.
Optional Performance Toolkit for VM feature — New editions
Unlicensed documentation
Updated for z/VM V5.3:
Order Format
Title number PDF BKM Print
z/VM: Performance Toolkit Guide SC24-6156 X X
z/VM: Performance Toolkit Reference SC24-6157 X X
BKM = BookManager
Note:
An "X" in one of the columns indicates available formats.
Optional DFSMS/VM® feature — New editions
Unlicensed documentation
Updated for z/VM V5.3:
Order Format
Title number PDF BKM Print
z/VM: DFSMS/VM Customization SC24-6086 X X
z/VM: DFSMS/VM Planning Guide SC24-6089 X X
z/VM: DFSMS/VM Removable Media SC24-6090 X X
Services
z/VM: DFSMS/VM Storage Administration SC24-6091 X X
BKM = BookManager
Note:
An "X" in one of the columns indicates available formats.
Optional DFSMS/VM feature — Not new editions
Unlicensed documentation
Not updated for z/VM V5.3:
Order Format
Title number PDF BKM Print
z/VM: DFSMS/VM Diagnosis Guide GC24-6087 X X
z/VM: DFSMS/VM Messages and Codes GC24-6088 X X
BKM = BookManager
Note:
An "X" in one of the columns indicates available formats.
Other — New editions
Unlicensed documentation
Updated or new with z/VM V5.3:
Order Format
Title number PDF BKM Print
CMS/TSO Pipelines: Author's Edition SL26-0018 X
Network Job Entry: Formats and Protocols SA22-7539 X X
System z9(TM) and eServer zSeries Open SA22-7935 X X
Systems Adapter-Express
Customer's Guide and Reference
System z9 and eServer zSeries 890 and SA22-7990 X X
990 Systems Adapter-Express
Integrated Console Controller
User's Guide
z/OS and z/VM: Hardware Configuration SC33-7986 X X
Definition Messages
z/OS and z/VM: Hardware Configuration SC33-7989 X X
Manager User's Guide
z/OS MVS(TM) Program Management: SA22-7644 X X
Advanced Facilities
z/OS MVS Program Management: SA22-7643 X X
User's Guide and Reference
z/OS: Language Environment Concepts Guide SA22-7567 X X
z/OS: Language Environment Debugging GA22-7560 X X
Guide
z/OS: Language Environment Programming SA22-7561 X X
Guide
z/OS: Language Environment Programming SA22-7562 X X
Reference
z/OS: Language Environment Run-Time SA22-7566 X X
Messages
z/OS: Language Environment Writing ILC SA22-7563 X X
Applications
BKM = BookManager
Note:
An "X" in one of the columns indicates available formats.
Note:
The updates in these new editions may not contain any new z/VM information.
Other — Not new editions
Unlicensed documentation
Not updated with z/VM V5.3:
Order Format
Title number PDF BKM Print
Common Programming Interface SC26-4399 X X
Communications Reference
Common Programming Interface Resource SC31-6821 X X
Recovery Reference
eServer zSeries 900: Planning for Open GA22-7477 X X
Systems Adapter-2 Feature
BKM = BookManager
Note:
An "X" in one of the columns indicates available formats.
Redbooks™ and Redpapers
IBM Redbooks and Redpapers are developed and published by the IBM International Technical Support
Organization (ITSO). They are intended to develop and deliver skills, technical know-how, and
materials to technical professionals of IBM, Business Partners, and customers.
Refer to Software Announcement
205-168
, dated July 27, 2005, and Software Announcement
206-084
, dated April 27, 2006, for a list of applicable Redbooks and Redpapers. New Redbooks and
Redpapers since the last z/VM announcement include:
-
Systems Administration
-
z/VM and Linux on IBM System z: The Virtualization Cookbook for SLES9
(SG24-6695-01) describes how to set up your own Linux virtual servers on IBM zSeries and System z9
under z/VM. It adopts a cookbook format that provides a clearly documented set of procedures for
installing and configuring z/VM in an LPAR and then installing and customizing Linux. You need a
System z or zSeries logical partition (LPAR) with associated resources, z/VM 5.2 media, and a Linux
distribution. This book is based on SUSE Linux Enterprise Server 9 (SLES9) for zSeries and we
address both 31-bit and 64-bit distributions.
-
IBM z/VM and Linux on IBM System z: Virtualization Cookbook for Red Hat Enterprise Linux 4
(SG24-7272-00) describes how to set up your own Linux virtual servers on zSeries and IBM System z9
under z/VM. It adopts a cookbook format that provides a clearly documented set of procedures for
installing and configuring z/VM in a logical partition (LPAR) and then installing and customizing
Linux.
-
Networking
-
IBM System z Connectivity Handbook
(SG24-5444-06) discusses the connectivity options available for use within and beyond the data
center for the IBM System z9 Enterprise Class (z9 EC), formerly System z9 109 (z9-109), System z9
Business Class (z9 BC), zSeries 990 (z990), zSeries 890 (z890), zSeries 900 (z900), and zSeries 800
(z800) servers.
-
Mainframe Servers
-
IBM System z9 Enterprise Class Technical Guide
(SG24-7124-01) discusses the IBM System z9 Enterprise Class (z9 EC), which offers a continuation of
the IBM scalable mainframe server and provides an overview of the z9 EC and its functions, features,
and associated software support.
-
IBM System z9 Business Class Technical Introduction
(SG24-7241-00) provides basic information about new hardware functions and features, associated
software support, and migration considerations.
-
IBM System z9 109 Configuration Setup
(SG24-7203-00) assists you in planning and implementing a comprehensive configuration and
implementation path for your IBM System z9 EC (formerly the z9 109), presents configuration setup
examples, and discusses each implementation scenario in detail.
-
How does the MIDAW facility improve the performance of FICON™ channels using DB2® and other
workloads?
(REDP-4201-00) is intended for industry professionals who are interested in understanding IBM
z/Architecture™, and for people who want to understand the types of workloads that will experience
improved performance.
-
Introducing N_Port Identifier Virtualization for IBM System z9
(REDP-4125-00) describes the N_Port ID Virtualization (NPIV) feature in a Fibre Channel Protocol
(FCP) fabric and focuses on NPIV concepts and implementation.
-
Using Cryptographic Adapters for Web Servers with Linux on IBM System z9 and zSeries
(REDP-4131-00) describes how to configure Web servers (such as Apache2 and IBM HTTP server) to use
hardware cryptographic devices in Linux running on IBM System z9 and zSeries platforms.
-
Storage
-
IBM System Storage DS6000 Series: Architecture and Implementation
(SG24-6781-02) describes the architecture, implementation, and setup of the IBM System Storage
DS6000 series of storage servers.
-
Solutions
-
IBM Communication Controller for Linux on System z V1.2.1 Implementation Guide
(SG24-7223-01) helps you to install, tailor, and configure the IBM Communication Controller for
Linux on System z (CCL) V1.2.1.
-
IBM Virtualization Engine™ V2.1 for System z
(SG24-7276-00) guides you in installing, configuring, and using the suite of products available for
the IBM System z mainframe. IBM Director 5.10, IBM Director z/VM Center extensions, Enterprise
Workload Manager V2.1 (EWLM), Virtualization Engine Console, Resource Dependency Service V2.1, the
Director and EWLM bridges to the Virtualization Engine Console are all installed on four separate
Linux images (z/VM guests).
For the most current Redbooks or Redpapers, visit the IBM Redbooks Web site at
Displayable softcopy publications
All unlicensed online books are also available on CD-ROM (
IBM Online Library: z/VM Collection,
SK2T-2067) and DVD (
IBM Online Library: z/VM Collection on DVD,
SK5T-7054). The
IBM Online Library: z/VM Collection
CD-ROM and the
IBM Online Library: z/VM Collection on DVD
also contain libraries for approximately 60 products that run on z/VM V5.3. These will be available
in the United States and Canada at the general availability of z/VM V5.3 and 30 days after general
availability in other countries. For a list of kit contents, contact your IBM Business Partner or
IBM representative.
One copy of the
IBM Online Library: z/VM Collection
CD-ROM and
IBM Online Library: z/VM Collection on DVD
will be shipped automatically with the product, at no additional charge. To order one additional
copy, use the following features:
Feature number Order number
z/VM Collection Kit 7000 SK2T-2067
z/VM Collection Kit on DVD 7222 SK5T-7054
To order additional quantities greater than one, for a fee, use SK2T-2067 or SK5T-7054 on the IBM
Publications Center at
The online books can be used with the BookManager READ licensed programs
in any of the READ-supported environments. The online books CD-ROM and
DVD contain a program, Softcopy Receiver Tool, for transferring
BookManager files to the workstation or host.
Terms and conditions for use of the machine-readable files are shipped
with the files.
Source file publications:
z/VM V5.3 manuals are not offered in source file form.
Licensed publications:
z/VM V5.3 does not have any licensed publications.
Back to top
Specified operating environment
Hardware requirements
z/VM V5.3 will operate on:
-
System z9 Enterprise Class.
Refer to the Preventive Service Planning (PSP) bucket for the minimum MCL level and any required
updates.
-
System z9 Business Class.
Refer to the Preventive Service Planning (PSP) bucket for the minimum MCL level and any required
updates.
-
IBM eServer zSeries 990.
-
At a minimum, MCL009 in the J13479 (SE-FCS 3X) stream must be installed.
-
At a minimum, MCL112 in the J13484 stream must be installed prior to IPLing z/VM V5.3 to avoid
system outages.
For additional information on this required update, refer to Resource Link™ at
http://www.ibm.com/servers/resourcelink/
You must have a Resource Link user ID and password. Select "Fixes," then
select "Hiper Alerts" under "Alerts," then select "zSeries — z990,"
then select "051205 HIPER MCL for 2084, 2086."
-
IBM eServer zSeries 890.
-
MCL009 in the J13479 (SE-FCS 3X) stream must be installed.
-
MCL112 in the J13484 stream must be installed prior to IPLing z/VM V5.3
to avoid system outages.
For additional information on this required update, refer to Resource
Link at
http://www.ibm.com/servers/resourcelink/
You must have a Resource Link user ID and password. Select "Fixes," then
select "Hiper Alerts" under "Alerts," then select "zSeries — z890,"
then select "051205 HIPER MCL for 2084, 2086."
-
IBM eServer zSeries 900.
-
IBM eServer zSeries 800.
Refer to the Preventive Service Planning (PSP) bucket for your System z
server for any additional updates. The PSP buckets can be found on
Resource Link at
-
For the z9 EC, see the "Upgrade 2094DEVICE, Subset 2094/ZVM" bucket.
-
For the z9 BC, see the "Upgrade 2096DEVICE, Subset 2096/ZVM" bucket.
-
For the z990, see the "Upgrade 2084DEVICE, Subset 2084/ZVM" bucket.
-
For the z890, see the "Upgrade 2086DEVICE, Subset 2086/ZVM" bucket.
-
For the z900, see the "Upgrade 2064DEVICE, Subset 2064/ZVM" bucket.
-
For the z800, see the "Upgrade 2066DEVICE, Subset 2066/ZVM" bucket.
Specific processor facilities required by z/VM V5.3 can be found on the
z/VM Web site at
Refer to the appendix of the
z/VM General Information
manual for more information.
Installation requirements
TCP/IP for z/VM V5.3 hardware requirements:
TCP/IP for z/VM V5.3 requires one of the following:
-
IBM 3172 Interconnect Controller with the Interconnect Controller Program
(ICP) V3 (5621-425)
-
IBM Open Systems Adapter 2 (OSA-2) Token Ring, Fast Ethernet, and 155 ATM
-
IBM Open Systems Adapter Express (OSA-Express) Gigabit Ethernet, Fast
Ethernet, 155 ATM, and Token Ring
-
IBM Open Systems Adapter Express2 (OSA-Express2) GbE, 10 GbE, 1000BASE-T
Ethernet, and Token Ring
-
HYPERchannel A220 Processor Adapter 42990007
TCP/IP for z/VM V5.3 supports the HYPERchannel Series A devices (and
HYPERchannel Series DX devices that are functioning as Series A devices).
For additional information, refer to the appropriate Network Systems
Corporation documentation.
-
RS/6000® Channel Attachment using the Block Multiplexer Channel or
ESCON® Adapter
-
IBM 3088 Multisystem Channel Communication Unit
TCP/IP for z/VM V5.3 supports direct connection to another TCP/IP for VM,
z/OS.e, or z/OS using the IBM 3088.
-
IBM ESCON Channel-to-Channel Adapter
TCP/IP for z/VM V5.3 supports direct connection to another TCP/IP for VM
or z/OS using the IBM ESCON Channel-to-Channel Adapter.
-
IBM FICON Channel-to-Channel Adapter
TCP/IP for z/VM V5.3 supports direct connection to another TCP/IP for VM
or z/OS using the IBM FICON Channel-to-Channel Adapter.
-
IBM HiperSockets
VM programs using TCP/IP can communicate via HiperSockets with other VM
programs using TCP/IP and with guest operating systems and other logical
partitions using TCP/IP.
TCP/IP for z/VM V5.3 also requires a 3270-equivalent workstation for
TCP/IP administration.
VM Guest RSA-Assist Support for Linux hardware requirements:
In order for the VM Guest RSA-Assist Support for Linux to
operate, corresponding function in Linux for System z and one of the
following are required:
-
IBM Crypto Express2 Coprocessor or Accelerator
-
IBM PCIX Cryptographic Coprocessor (PCIXCC)
-
IBM PCI Cryptographic Coprocessor (PCICC)
-
IBM PCI Cryptographic Accelerator (PCICA)
Software requirements
Prerequisite requirements
-
EREP VM (5654-260) V3.5.0.
-
The PTFs for APARs VM63743, VM63624, and VM63946 have been applied to the z/VM V5.3 system DDRs.
-
PTF for APAR VM63743 provides the necessary function to support the z9 EC.
-
PTF for APAR VM63624 provides the necessary function to support the DS6000 and DS8000.
-
PTF for APAR VM63946 provides the necessary function to support the z9 BC.
-
Device Support Facilities — ICKDSF VM (5684-042) V1.17.0. Any fixes requested for ICKDSF should
specify the PTF number of the VMSES/E formatted update. VMSES/E installable PTFs have the release
number G14. 'G' indicates Release 17 of ICKDSF and '14' indicates VMSES/E format. The
following PTFs have been applied to the z/VM V5.3 system DDRs:
-
The PTF for APAR PQ84848 provides the necessary function for ICKDSF to support large FBA devices.
-
The PTFs for APARs PQ96706 and PQ95319 provide the necessary function for ICKDSF to support the
DS8000 and DS6000 storage devices, respectively.
The prerequisite no-charge products,
EREP
and
ICKDSF,
are preinstalled on the base product system DDRs.
When ordering z/VM V5.3, you must already be licensed for these products (5654-260 and 5684-042) or
a separate order must be placed for each of these products to establish a license.
Refer to the
Preinstalled products
section for additional information on ordering EREP and ICKDSF.
Optional product/feature requirements
-
DFSMS/VM requirements
-
ISPF V3.2.0 (5684-043) or a subsequent release for DFSMS/VM usage. ISPF is not required if you are
using only the 3495 Tape Library Dataserver support of DFSMS.
-
DirMaint Facility optional feature of z/VM V5.3 if the minidisk management function is needed.
-
RACF Security Server for z/VM optional feature of z/VM V5.3 or its equivalent if a security product
is needed for authorization.
-
Tivoli® Storage Manager Extended Edition for z/OS and z/VM V5.2 (5698-A11), Tivoli Storage Manager
for z/OS and z/VM V5.2 (5698-A13), or Tivoli Storage Manager for VM (5697-TS9) and Language
Environment component supplied with the base V5.2 system DDRs if Migration Level 2 (ML2)
function of DFSMS/VM is used.
Note:
Program numbers 5698-A11 and 5698-A13 were withdrawn from marketing on January 21, 2005,
and service support is planned to be discontinued on April 30, 2007.
For current information regarding the discontinuance of service, refer to the z/VM Licensed Program
(LP) Migration Matrix at
Note:
Program number 5697-TS9 was withdrawn from marketing on
March 7, 2005, and service was discontinued on
March 31, 2006.
-
TCP/IP for z/VM V5.3 to access the IBM 3495 Tape Library Dataserver for
processors capable of 3490/3490E tape I/O, but incapable of 3495 Tape
Library Data Server control.
-
RSCS FL530 feature for remote operations.
-
IBM Compiler for REXX/370 (5695-013) and IBM Library for REXX/370
(5695-014), if the compiled REXX installation-wide exit or a compiled ACS
REXX exit is desired.
-
The PTF for APAR VM63746 allows DFSMS/VM RMS on z/VM V5.1, V5.2, and V5.3
to share tape drive devices using the multi-access tape feature of the CP
ATTACH command. This allows, for example, z/VM 3480 install media to be
inserted, and z/VM 5.3 to be installed from, an Automated Tape Library
(ATL).
The PTF for APAR VM64062 supports locating encryption-capable 3592 tape
drives in an Enterprise Automated Tape Library. The DFSMS/VM support
provides tape-encryption capabilities for a z/VSE guest running on z/VM.
-
Hardware Configuration Definition (HCD) and Hardware Configuration
Manager (HCM) requirements
The following PTFs have been applied to the z/VM V5.3 system DDRs:
-
PTF for APAR VM63960 provides the new function made available in z/OS
V1.8.
-
PTF for APAR VM63721 to support for 63.75K subchannels and CHPID type OSN
on the z9 EC and z9 BC.
-
PTF for APAR VM63869 provides the necessary function to support the z9
BC.
-
IBM High Level Assembler (5696-234) requirements
-
Language Environment
The following PTFs have been applied to the z/VM V5.3 system DDRs:
-
The PTF for APAR VM64117 provides required changes for C/C++ library
functions to support the changes for Daylight Savings Time. It must be
applied to z/VM V5.1 and V5.2.
-
The PTF for APAR VM64055 provides the necessary Language Environment
support to:
-
Run LDAP on z/VM V5.3
-
Support new, increased sockets resolver domain search limits
-
Add a delete interface to the C/C++ ioctl( ) function
-
Online displayable publications requirements
-
BookManager files can be read by either BookManager READ for VM (a
separately orderable product) or IBM Softcopy Reader (supplied on the
CD-ROM and DVD). APAR GC05366 for BookManager/VM READ is required for
READ/VM V1.3 Public Library to run in a non-370 mode. BookManager
products also have prerequisite product requirements. Specific details
are available in the BookManager announcement documentation.
-
POSIX requirements
-
Developing POSIX applications requires C/C++ for z/VM V1.1 (5654-A22).
-
RSCS FL530 requirements
-
To communicate with users in an SNA network requires ACF/VTAM® for
VM/ESA®, V4.2 (5654-010).
-
To communicate within an IP network requires TCP/IP for z/VM FL530.
-
Group Control Subsystem (GCS) must be configured and activated.
-
Shared-DASD complex and CSE cluster program requirements
In a shared-DASD complex, a single Directory Maintenance Facility
(DirMaint) server with a single source directory can manage the object
directory on up to 16 z/VM systems, if the DirMaint executable code disks
and source directory disk are shared among all the systems. The
following are required to support the shared-DASD complex:
-
DirMaint, Function Level 530 (FL530)
Within the shared-DASD complex, all z/VM systems must be running the same
DirMaint FL530 service level. Therefore, you must be licensed for the
DirMaint FL530 feature on any z/VM V5.3 system in the complex.
A CSE cluster consists of two, three, or four z/VM systems. The
following are required to support the CSE function:
-
The same DirMaint requirements as for the shared-DASD complex described
above.
-
For shared spool and cross-system messaging:
-
VM/Pass-Through Facility, V2.1.1, or later (5684-100)
OSA and Open Systems Adapter/Support Facility (OSA/SF) program
requirements:
OSA/SF is provided with and supported on z/VM and can be
accessed by a CMS user ID, a REXX EXEC, or a Java™-based Graphical User
Interface (GUI). The GUI needs access to the Java 1.4 runtime and help
on the workstation.
Access at the OSA/SF GUI requires the following communications protocols:
-
For TCP/IP communication:
-
TCP/IP for z/VM on the host
-
TCP/IP on the workstation
OSA/SF 4.4.0 is also provided in the OSA/SF facility for z/VM V5.3.
-
The PTF for APAR OA15170 provides the necessary function to display
information for OSN features on the z9 EC and the z9 BC and support for
Layer 2.
-
To support an OSA in TCP/IP Passthru mode in a z/VM V5.3 environment,
OSA/SF requires TCP/IP for z/VM V5.3. OSA/SF support is required in this
mode only if access to one of the OSA's ports is being shared by more
than one host program or if an ATM OSA-2 is being used as a LAN Emulation
Client (LEC).
For additional information on OSA/SF, refer to Hardware Announcement
103-142
, dated May 13, 2003.
TCP/IP for z/VM V5.3 program requirements:
TCP/IP for z/VM V5.3 has the following additional program
requirements:
-
If the SSL server is to be run, one of the following Linux distributions
must be installed and configured for exclusive use by the SSL server:
-
Novell SUSE Linux Enterprise Server (SLES) 9 Service Pack 3 (64-bit)
-
Novell SUSE Linux Enterprise Server (SLES) 9 Service Pack 3 (31-bit)
-
Red Hat Enterprise Linux AS (Version 4 U4) (64-bit)
-
Red Hat Enterprise Linux AS (Version 4 U4) (31-bit)
-
If a primary or secondary domain name server (not a caching-only name
server) or the network database server is to be run:
-
IBM DB2 Server for VSE & VM V7.1 (5697-F42), or later
-
For SNAlink LU0 interface support:
-
ACF/VTAM® for VM/ESA V4 (5654-010)
-
For X.25 interface support:
-
X.25 NCP Packet Switching Interface (NPSI) V3.4 (5688-035), or later, for
3745
-
Corresponding levels of ACF/VTAM and ACF/NCP that support NPSI
-
If programs are developed in C:
-
IBM C for VM/ESA V3.1 (5654-033) or C/C++ for z/VM V1.1 (5654-A22)
-
If programs are developed in Pascal:
-
IBM VS Pascal V1.2 (5668-767) Compiler and Library
Linux program requirements:
Linux for System z is not provided with z/VM V5. In order to
operate Linux as a guest of z/VM, Linux must be obtained from Linux
distribution partners.
For specific function and for the most current information on Linux
distributions, refer to
Limitations
-
z/VM V5 will operate only on hardware servers that support z/Architecture
(64-bit), including z9 EC, z9 BC, z990, z890, z900, and z800.
-
Linux is the only guest operating system z/VM will support on IFL
processors (other than z/VM V4 or z/VM V5 itself).
-
Use of IFL processors on z800 and z900 machines requires LPAR mode.
Customers who choose to add IFL processors to a z800 or z900 machine
running in basic mode will also have to run their operating system on the
standard engine(s) in LPAR mode. This is not a consideration for z9 EC,
z9 BC, z990, and z890 machines, which do not have basic mode.
-
z/VM V5 does not provide support for V=R or V=F guest images. Customers
running V=R and V=F guests should consider this when migrating to z/VM
V5. The increase in processor requirements to run a V=V guest that was
previously run as V=R, may be significant due to the loss of various
hardware assists.
Performance considerations:
System performance depends on the hardware resources allocated to
z/VM V5.3 and on the level of activity within each Linux image. The
results of the performance evaluation of z/VM V5.3 are planned to be
available on June 29, 2007, in the z/VM
Performance Report
on the z/VM Web site at
Additional z/VM performance information is available on the z/VM Web site
at
For assistance in understanding the performance implications for a
particular situation, contact your IBM representative or your IBM
Business Partner.
User group requirements:
This announcement satisfies or partially satisfies requirements from
one or more of the worldwide user group communities. Groups include
zSeries Business Leaders' Council (z/BLC), World Alliance of VSE and VM
(WAVV), COMMON, COMMON Europe, GUIDE/SHARE EUROPE, Interaction
(Australia/NZ, includes the former ASG and COMMON Australia), Japan
GUIDE/SHARE (JGS), and SHARE Inc.
User group requirements satisfied with this announcement:
Requirement
number Requirement description
MR1126025746 Enable z/VM to generate "gratuitous ARP"
when
ARP takeover occurs
MR1022036221 Allow use of the TRACERTE command without
requiring special authorization
MR0628062936 Provide virtual switch support for Link
Aggregation Control Protocol (LACP) of
IEEE 802.3ad
MR1031036453 Allow deleting a device and link on TCPIP
MR1024054319 Display PTF applied and put into production
dates from the SERVICE EXEC
MR042604374 Provide support for SMTP IPMAILERNAME statement
MR0725052955 Provide an option on SET OBSERVER COMMAND for
no display
MR0209054947 Allow user identifiers to be used unambiguously
as SMTP nicknames
MR00076228 Allow RSCS AUTH command to be dynamic
MR00074907 Allow RSCS AUTH command to be dynamic
MR112102599 Allow RSCS AUTH command to be dynamic
MR0924024650 Allow RSCS AUTH command to be dynamic
MR0531051830 Provide z/VM support of zAAP specialty processors
MR0329054435 Provide specification of COMMTYPE ANY in TELNETPARMS
MR0512051655 Provide external interface to return server model
and serial number
MR0504057612 Support multiple targets with z/VM CP
FlashCopy® command
MR0204055238 Provide a query command to obtain FLASHCOPY status
MR061405463 Reduce time for hardware response messages and
provide quicker responses to the CP FLASHCOPY
command
MR0227042533 Provide improvements to the LOGON command
MR0406052249 Provide improvements to the LOGON command
MR00064226 Provide a CP SET RESERVE equivalent in the
CP directory
Planning information
Customer responsibilities
z/VM V5.3 Subscription and Support (S&S):
To order z/VM V5.3, you must use the SDO, program number 5741-A06. The z/VM base system,
any ordered optional z/VM features, and any ordered SDO licensed products will be delivered as part
of the z/VM SDO.
If you desire the level of service provided under the IBM ICA license agreement with S/390® and
z/VM licensed products, you are strongly encouraged to order the program number for z/VM S&S
(5741-SNS). This program number provides enhanced support that includes telephone assistance (voice
support for defects during normal business hours) and access to updates, releases, and versions of
the program for as long as support is in effect. z/VM S&S will be automatically added to your
order. If you do not desire the S&S license for z/VM and/or the optional features of DirMaint,
RSCS, RACF Security Server, or the Performance Toolkit for VM, you must take specific action to
decline this support.
To host Linux guests of z/VM V5, you must also obtain a Linux for System z distribution.
Information on those Linux distribution partners that have a marketing relationship with IBM can be
found at
Licensed products packaged with z/VM V5.3:
With the availability of z/VM V5, the following priced, optional
products or features are automatically shipped and preinstalled on the
z/VM V5 base product media:
-
DirMaint FL530 feature
-
RSCS FL530 feature
-
RACF Security Server FL530 feature
-
Performance Toolkit for VM FL530 feature
For more information on these products or features, refer to the
Preinstalled products
and features section.
These products or features must be enabled before using. If you choose to enable them, you must
have a license for the product or the feature.
If you do not have a license for DirMaint, RSCS, RACF, or the Performance Toolkit for VM, you may
establish one by placing an order for the optional features. You will receive the program directory
for the optional feature or program product. The program directories include instructions for
enabling use of the products.
For other IBM licensed products or products from Independent Software Vendors (ISVs), you should
review the following support documents:
Running 370-mode applications:
To simplify the migration of older applications and facilitate
the running of 370-mode-only CMS applications in non-370-mode virtual
machines, such as XA or XC mode, IBM provides the
370 Accommodation
function. This function originally shipped with VM/ESA V1.2.1 (available
July 1993) and has since been enhanced as the result of customer
experience and input. 370 Accommodation handles the vast majority of
inconsistencies between 370 mode and either XA or XC mode, eliminating
the need to change these applications to exploit the new architectures.
z/VM V5 supports only XA-, ESA-, and XC-mode virtual machines. z/VM V5
does not support 370-mode virtual machines. 370-mode virtual machines
are converted to XA mode during logon processing. The 370 Accommodation
function is still supported for applications. If you find your
applications cannot run under the current level of CMS, you should use
the 370 Accommodation function or modify your applications, if possible.
If problems persist, call IBM Service for assistance.
Direct customer support:
Direct customer support is provided by IBM Operational Support
Services — SoftwareXcel. This fee service enhances your productivity
by providing voice and electronic access into the IBM support
organization. IBM Operational Support Services — SoftwareXcel helps
answer questions pertaining to usage and suspected software defects for
eligible products.
Installation and technical support is provided by Global Services. For
more information call 800-IBM-4YOU (426-4968).
For technical support or assistance, go to
or contact your IBM representative for additional assistance.
Packaging
z/VM V5.3:
The z/VM V5.3 product package is distributed with the following:
3590 media:
Starting with the delivery of z/VM V4.3, z/VM was made available
on 3590 media. With this capability, multiple physical tape images can
now be delivered on consolidated (or stacked) tape(s) for z/VM. For
example, the multiple tape volumes previously required to deliver the
z/VM base system media on 3480 now require only a single 3590 tape. This
is made possible by taking advantage of the larger storage capacity of
the 3590 media. Additionally, optional products, offered in the z/VM
SDO, may now be stacked on a physical tape, labeled "z/VM Licensed
Program Products." In order to determine the contents of these stacked
tapes, you
MUST
refer back to the media report included with your shipment.
Security, auditability, and control
The announced program uses the security and auditability features inherent in the virtual machine
and the System/370™, ESA/370, and ESA/390 architectures, and z/Architecture. The security and
auditability of z/VM V5 are the same for ESA/390 and z/Architecture. The customer is responsible
for evaluation, selection, and implementation of security features, administrative procedures, and
appropriate controls in application systems and communication facilities.
Software Services
IBM Software Services has the breadth, depth, and reach to manage your services needs. You can
leverage the deep technical skills of our lab-based, software services team and the business
consulting, project management, and infrastructure expertise of our IBM Global Services team. Also,
we extend our IBM Software Services reach through IBM Business Partners to provide an unmatched
portfolio of capabilities. Together, we provide the global reach, intellectual capital, industry
insight, and technology leadership to support any critical business need.
To learn more about IBM Software Services or to contact a Software Services sales specialist, visit
Back to top
Charge metric
Pricing metric description:
The products and features in this announcement have one pricing metric — Value Units based on
the number of processors. Value Unit pricing with a decreasing one-time charge (OTC) price per
engine, subject to the tiers as documented in Value Unit Exhibit VUE021, is available for z/VM V5
for the optional features of DirMaint, RSCS, RACF, and the Performance Toolkit for VM, and for S&S
entitlements at initial order of z/VM V5 or its features. Value Units of a given product cannot be
exchanged, interchanged, or aggregated with Value Units of another product.
Engine-based Value Unit pricing of z/VM V5 is different than MSU-based Value Unit pricing, which is
available on other IBM software products.
Program Pricing metric
Program name number description
z/VM V5 5741-A05 Value Units
RSCS feature 5741-A05 Value Units
RACF Security Server feature 5741-A05 Value Units
DirMaint feature 5741-A05 Value Units
Performance Toolkit for VM feature 5741-A05 Value Units
Value Unit pricing for z/VM V5 provides a lower price per processor as more Value Units are licensed
with z/VM V5. You may aggregate the capacity for all the processors running z/VM V5 across the
enterprise to achieve a more economical price. There may also be a price benefit when you increase
your capacity. Additional capacity is not priced starting at the base with a flat price per unit.
Instead, additional capacity is priced starting at the capacity on which z/VM V5 has already been
installed, which may result in a lower unit price.
Translation from processor to Value Units:
The total number of engine-based Value Units is calculated according to the following example.
If the customer has installed six processors and will be operating z/VM V5 on all six processors,
the applicable Value Units would be:
(3 * 10) + (3 * 9) = 57 Value Units
The following z/VM V5 products and optional features and their associated Subscription and Support
(S&S) are affected by the metric change from a "flat per-processor price" to "engine-based Value
Units":
IPLA S&S
program program Program
number number description
5741-A05 5741-SNS z/VM V5
5741-A05 5741-SNS RSCS feature
5741-A05 5741-SNS RACF Security Server feature
5741-A05 5741-SNS DirMaint feature
5741-A05 5741-SNS Performance Toolkit for VM feature
The products in this announcement are available with IBM Software On/Off Capacity on Demand (On/Off
CoD). If you are running On/Off CoD on your IBM servers, you can now also pay for z/VM V5 on a
processor per-day basis during your peak periods. For additional information on On/Off CoD, refer
to Software Announcement
203-202
, dated August 12, 2003, and Marketing Announcement 304-004, dated January 13, 2004.
Performance Toolkit for VM
The Performance Toolkit for VM feature provides a variety of reports on system performance to help
manage your performance more efficiently.
The Performance Toolkit for VM feature was derived from the IBM FCON/ESA program (5788-LGA) and made
available with z/VM V4.4. It was updated in z/VM V5.1 to provide functional equivalence to the
Performance Reporting Facility (PRF) priced optional feature of z/VM V4.
The Performance Toolkit for VM feature is considered to be a program update for the RealTime Monitor
(RTM) and/or the Performance Reporting Facility (PRF) features of z/VM V4 as defined in the IBM
International Agreement for Acquisition of Support, Z125-6011. Therefore, any existing z/VM V4
customer who has purchased a Subscription & Support (S&S) license for the RTM or PRF feature is
entitled to receive a no-charge upgrade for the Performance Toolkit for VM feature when ordering
z/VM V5.3.
The priced, optional RTM and PRF features are not available with z/VM V5 nor can they be licensed on
z/VM V5.
IBM strongly encourages customers to order S&S for the Performance Toolkit for VM feature.
S&S provides an easy and effective way for customers to access, during the coverage period, eligible
new versions and releases of the Performance Toolkit for VM feature.
S&S also provides the same level of support that was available when customers paid a monthly license
charge for products with the IBM Customer Agreement software license.
High Level Assembler (5696-234)
The High Level Assembler (5696-234) or an equivalent product is required for z/VM to:
-
Apply corrective service to the RACF Security Server for z/VM associated CP parts
-
Change exit routines or perform local modifications for any IBM VM product or vendor product
For pricing, terms and conditions, or questions about licensing on IFL processors, customers should
contact an IBM representative or Business Partner.
Processor
A processor (commonly called a CPU or core) is a functional unit within a computing device that
interprets and executes instructions. A processor consists of at least an instruction control unit
and one or more arithmetic or logic unit. With multicore technology each core is considered a
processor. With full capacity licensing, a Proof of Entitlement (PoE) must be acquired for all
activated processors available for use on the server.
The programs in this announcement have Value Unit-Based pricing.
Program
number Program name Value Unit Exhibit
5741-A05 z/VM V5 VUE021
For each System z IPLA program with Value Unit pricing, the quantity of that program needed to
satisfy applicable IBM terms and conditions is referred to as the "required license capacity." Your
required license capacity is based upon the following factors:
-
The System z IPLA program you select
-
The applicable Value Unit Exhibit
-
The applicable terms
Value Unit Exhibit VUE021
Engine-based Value Units for a specified number of processors are determined by the following table:
Processors Processors Value Units
Level minimum maximum per processor
Base 1 3 10
Tier A 4 6 9
Tier B 7 9 8
Tier C 10 12 7
Tier D 13 16 6
Tier E 17 20 5
Tier F 21 25 4
Tier G 26 + 3
Order z/VM SDO through the Internet
ShopzSeries provides an easy way to plan and order System z software upgrades, including z/VM.
Using ShopzSeries, customers can quickly generate orders for z/VM SDOs. Additionally, ShopzSeries
will ensure your order is technically correct (that is, ensures any corequisite or prerequisite or
incompatibility conditions are resolved to ensure timely order placement and processing).
ShopzSeries is available in the United States and several countries in Europe. In countries where
ShopzSeries is not available yet, contact your IBM representative (or IBM Business Partner) to
handle your order via the traditional IBM ordering process. For more details and availability,
visit the ShopzSeries Web site at
The z/VM V5.3 SDO licensed products are eligible for Internet delivery
using the ShopzSeries Web site and are planned to be available after the
general availability of z/VM V5.3. The z/VM base operating system cannot
be delivered using Internet delivery of ShopzSeries.
Basic license
Licensing for z/VM V5.3:
The following z/VM V5 base and optional features and their associated Subscription and Support
(S&S) are affected by the metric change from "flat price per engine" on z/VM V4 to "Value Units"
based on the number of processors with z/VM V5:
IPLA SDO S&S
program program program Program
number number number description
5741-A05 5741-A06 5741-SNS z/VM V5
5741-A05 5741-A06 5741-SNS RSCS feature
5741-A05 5741-A06 5741-SNS RACF Security Server feature
5741-A05 5741-A06 5741-SNS DirMaint feature
5741-A05 5741-A06 5741-SNS Performance Toolkit for VM feature
The program number, 5741-A05, is used for licensing z/VM V5. You must specify the number of
engine-based Value Units for the number of processors required as calculated by the Value Unit
pricer.
Customers who purchased a Subscription & Support (S&S) contract for z/VM V4 will be entitled to a
no-charge upgrade to z/VM V5.
When ordering z/VM V5 or the optional features to operate on standard processors (CPs) for a single
server within the enterprise, you must specify Value Units equal to the Value Units to cover the
number of standard processors (CPs) on your z9 EC, z9 BC, z990, z900, z890, or z800 server.
When ordering z/VM V5 or the optional features to operate on IFL processors for a single server
within the enterprise, you must specify Value Units equal to the Value Units to cover the number of
IFL processors on your z9 EC, z9 BC, z990, z900, z890, or z800 server.
When ordering z/VM V5 or the optional features to operate on standard processors (CPs) AND IFL
processors for a single server within the enterprise, you must specify Value Units equal to the
Value Units to cover the total number of processors (standard plus IFL) on your z9 EC, z9 BC, z990,
z900, z890, or z800 server.
For a single server in an enterprise, the number of Value Units ordered for any optional features
must be equal to the number of Value Units ordered for the base z/VM V5 product.
The quantity ordered cannot exceed the maximum number of processors per server. The number of
processors for a single server to be used to calculate Value Units should not be more than:
Quantity
IFL Standard Maximum
processors processors processors For each server
54 54 54 System z9 EC (2094)
6 3 7 System z9 BC (2096 R07)
7 4 7 System z9 BC (2096 S07)
32 32 32 zSeries 990 (2084)
4 4 4 zSeries 890 (2086)
15 16 16 zSeries 900 (2064)
3 4 4 zSeries 800 (2066)
4 0 4 zSeries Offering for Linux
(2066-0FL)
The optional features DirMaint, RSCS, RACF, and the Performance Toolkit for VM are preinstalled on
the base system media. Ordering these features establishes a license for entitlement purposes and
you will also receive a program directory for the optional features ordered. If you intend to use
DirMaint, RSCS, RACF, or the Performance Toolkit for VM, now or at a later date, you must establish
a license for billing and shipment of publications.
The Performance Toolkit for VM feature is considered a program update for the RTM and PRF features
as defined in the
IBM International Agreement for Acquisition of Support,
Z125-6011. Therefore, any existing z/VM V4 customers, with licenses for the RTM or PRF features,
who have also purchased S&S for either the RTM or PRF feature, are entitled to receive a no-charge
upgrade for the Performance Toolkit for VM feature when ordering z/VM V5.
Availability of Common Criteria Certification feature:
On October 26, 2005, the German Federal Office of Information Security (Bundesamt fur
Sicherheit in der Informationstechnik [BSI]) issued its certification that z/VM V5.1 with the
RACF for z/VM feature conforms to the requirements of the Controlled Access Protection Profile
(CAPP) and the Labeled Security Protection Profile (LSPP), both at Evaluation Assurance
Level 3+.
Therefore, z/VM V5.1 and its priced, optional features, DirMaint, RACF, and the Performance Toolkit
for VM, known as Common Criteria Certification feature, can be ordered if you require a certified
level of z/VM. The Recommended Service Update (RSU) Level 5103RSU (PTF UM97510) plus the RACF
for z/VM PTF for APAR VM63613 is required to maintain certification.
In Software Announcement
206-084
, dated April 27, 2006, IBM announced plans to withdraw the Common Criteria Certification
feature from marketing on September 30, 2007. This withdrawal date has changed and IBM
now intends to withdraw the Common Criteria Certification feature from marketing on
June 15, 2007. IBM plans to support the Common Criteria Certification feature until
September 30, 2007.
IBM intends to evaluate z/VM V5.3 with the RACF Security Server optional feature for conformance to
the Controlled Access Protection Profile (CAPP) and Labeled Security Protection Profile (LSPP) of
the Common Criteria standard for IT security, ISO/IEC 15408, at Evaluation Assurance Level 4
(EAL4).
This new SOD represents a modification to IBM's previously expressed Statement of Direction of
July 27, 2005, which stated IBM's intent "to evaluate z/VM V5.2 with the RACF for z/VM
optional feature for conformance to the Controlled Access Protection Profile (CAPP) and Labeled
Security Protection Profile (LSPP) of the Common Criteria standard for IT security, ISO/IEC 15408,
at Evaluation Assurance Level 4 (EAL4)." Based on additional evaluation of requirements, IBM
no longer intends to evaluate z/VM V5.2.
z/VM V5.3 (5741-A05) basic license
Entitlement
identifier Description License option/Pricing metric
S0111PP z/VM V5 Use-based OTC, Per Value Unit
S0111PH DirMaint feature Use-based OTC, Per Value Unit
S013T68 RSCS feature Use-based OTC, Per Value Unit
S0111PL RACF feature Use-based OTC, Per Value Unit
S0111PT Performance Toolkit Use-based OTC, Per Value Unit
for VM feature
Ordering z/VM V5.3 Using the SDO:
Orders for z/VM V5.3 will be accepted beginning June 15, 2007. When placing an
order, if you wish to have that order fulfilled with z/VM V5.3, you will need to specify a customer
requested arrival date (CRAD) of June 29, 2007, or later. Production of z/VM V5.3 orders
is planned to begin on June 29, 2007.
z/VM V5.2 and its priced, optional features of DirMaint, RACF, and the Performance Toolkit for VM
will be withdrawn from marketing on June 15, 2007, and will be supported until
April 30, 2009.
The Common Criteria Certification feature and its priced, optional features of DirMaint, RACF, and
the Performance Toolkit for VM will be withdrawn from marketing on June 15, 2007, and will
be supported until September 30, 2007.
z/VM V4.4 has been withdrawn from marketing effective March 31, 2006, as announced in
Withdrawal Announcement
905-261
, dated December 6, 2005. Service support for z/VM V4.4 has been withdrawn effective
September 30, 2006, as announced in Software Announcement
205-168
, dated July 27, 2005.
z/VM V3.1 has been withdrawn from marketing as of August 27, 2004. Service support for
z/VM V3.1 has been withdrawn effective December 31, 2005, as previously announced in
Withdrawal Announcement
904-151
, dated August 3, 2004.
Orders for z/VM V5.3 and the optional features must use the z/VM V5.3 SDO packaged offering, program
number 5741-A06. The z/VM base system, any ordered optional z/VM features, and any ordered SDO
licensed products will be delivered as part of the z/VM SDO.
You must specify the disk type to which you will install and the desired distribution medium.
With the ordering of z/VM V5.3, you will receive a system DDR tape or DVD containing the program
code for z/VM V5.3, an IPLA for 5741-A05, a LID, program directories, the SDO Enabling Aid, and one
copy of each publication available for z/VM V5.3 as listed in the Planning information, Packaging
section of this announcement.
Examples
-
Example 1 — You currently do not have z/VM V5 licensed on any processors on any System z9 or
zSeries server within your enterprise. Your engine-based Value Unit for licensing (5741-A05) is 0.
If you will be licensing z/VM V5 and designating
two
IFL processors on a single System z9 or zSeries server within your enterprise as running z/VM V5,
you will specify the disk type to which you will install and the desired distribution medium. When
licensing using 5741-A05, capacity to be specified in engine-based Value Units would be (2 * 10) or
20
resulting in a total of 20 Value Units.
-
Example 2 — You currently are not running z/VM V5 on standard processors (CPs) but you are running
z/VM V5 on
one
IFL processor (probably running Linux on System z) on a single System z9 or zSeries server within
your enterprise. Your engine-based Value Unit for licensing (5741-A05) is 10.
If you will be licensing z/VM V5 and designating
two
additional IFL processors on a single System z9 or zSeries server within your enterprise as running
z/VM V5, you will specify the disk type to which you will install and the desired distribution
medium. When licensing using 5741-A05, additional capacity to be specified in engine-based Value
Units would be (2 * 10) or
20
resulting in a total of 30 Value Units.
-
Example 3 — You currently are running z/VM V5 on
two
standard processors (CPs) on a single System z9 or zSeries server within your enterprise. Your
engine-based Value Unit for 5741-A05 is 20.
If you will be licensing z/VM V5 and designating
two
additional standard processors (CPs) on a single System z9 or zSeries server within your enterprise
as running z/VM V5, you will specify the disk type to which you will install and the desired
distribution medium. When licensing using 5741-A05, additional capacity to be specified in
engine-based Value Units would be (1 * 10) + (1 * 9) or
19
resulting in a total of 39 Value Units.
-
Example 4 — You currently are running z/VM V5 on
two
standard processors and on
one
IFL processor (probably running Linux for System z) on a single System z9 or zSeries server within
your enterprise. Your engine-based Value Unit for 5741-A05 is 30.
If you will be licensing z/VM V5 for
four
additional processors and designating
one
as a standard processor and the remaining
three
as IFL processors on a single System z9 or zSeries server within your enterprise as running z/VM
V5, you will specify the disk type to which you will install and the desired distribution medium.
When licensing using 5741-A05, additional capacity to be specified in engine-based Value Units would
be (3 * 9) + (1 * 8) or
35
resulting in a total of 65 Value Units.
-
Example 5 — You currently do not have z/VM V5 licensed on any processors on any System z9 or
zSeries server within your enterprise. Your engine-based Value Unit is 0.
If you will be licensing z/VM V5 and designating
two
standard processors on one System z9 or zSeries server and on an additional System z9 or zSeries
server within your enterprise, you will license z/VM V5 on
one
standard processor and on
two
IFL processors, you will specify the disk type to which you will install and the desired
distribution medium. When licensing using 5741-A05, additional capacity to be specified in
engine-based Value Units would be (3 * 10) + (2 * 9) or
48
resulting in a total of 48 Value Units because of aggregating the licenses within the enterprise.
z/VM V5.3 Base SDO (5741-A06) — S0111J2
Orderable supply ID Language Distribution medium
S0111RS US English 3480 Tape
S0111X6 US English 3590 Tape
z/VM V5.3 Base SDO (5741-A06) — S0111HM
Orderable supply ID Language Distribution medium
S0111RT US English DVD
Optional features of z/VM V5.3 SDO (5741-A06)
DirMaint feature (5741-A06) — S0111HV
Orderable supply ID Language Distribution medium
S0111RP US English 3480 Tape
S0111WZ US English 3590 Tape
S0111WX US English DVD
RSCS (5741-A06) — S013T66
Orderable supply ID Language Distribution medium
S013TCL US English 3480 Tape
S013TCM US English 3590 Tape
S013TCK US English DVD
RACF Security Server feature (5741-A06) — S0111J0
Orderable supply ID Language Distribution medium
S0111RN US English 3480 Tape
S0111X5 US English 3590 Tape
S0111X4 US English DVD
Performance Toolkit for VM feature (5741-A06) — S0111HX
Orderable supply ID Language Distribution medium
S0111RK US English 3480 Tape
S0111X2 US English 3590 Tape
S0111X1 US English DVD
The features are for stand-alone product and not for ordering.
z/VM V5.3 Base (5741-A05) — S0111J2
Orderable supply ID Language Distribution medium
S0111J3 US English 3480 Tape (Not for Supply)
z/VM V5.3 Base (5741-A05) — S0111HM
Orderable supply ID Language Distribution medium
S0111HN US English DVD System Image (Not
for Supply)
DirMaint feature (5741-A05) — S0111HV
Orderable supply ID Language Distribution medium
S0111HW US English 3480 Tape (Not for Supply)
RSCS feature (5741-A05) — S013T66
Orderable supply ID Language Distribution medium
S013T67 US English 3480 Tape (Not for Supply)
RACF Security Server feature (5741-A05) — S0111J0
Orderable supply ID Language Distribution medium
S0111J1 US English 3480 Tape (Not for Supply)
Performance Toolkit for VM feature (5741-A05) — S0111HX
Orderable supply ID Language Distribution medium
S0111HZ US English 3480 Tape (Not for Supply)
Support for z/VM V5.3
Program name: z/VM Subscription & Support
Program number: 5741-SNS
Support for z/VM V5 is provided and licensed under the IBM International Agreement for Acquisition
of Support (Z125-6011).
This 5741-SNS order establishes entitlement records as well as support for z/VM V5.3 or the optional
features. If an 5741-SNS order is declined, you will only be entitled to support under the basic
warranty for z/VM V5.3 (5741-A05).
z/VM has adopted the support lifecycle extensions as announced in Software Announcement
203-204
, dated August 12, 2003, which provide for 3 years of technical support after general
availability. Therefore:
-
Central service for z/VM V5.3 (5741-A05) is planned to be available by IBM until
September 30, 2010.
-
Central service for z/VM V5.2 (5741-A05) is planned to be available by IBM until
April 30, 2009.
-
Central service for the Common Criteria Certification feature (5741-A05) is planned to be available
by IBM until September 30, 2007.
-
Central service for z/VM V4.4 (5739-A03) was discontinued on September 30, 2006.
The z/VM S&S provides:
-
Corrections that fix substantial deviations of unmodified products from the then-current code,
publications, and informal documentation (that is, release notes and memos).
-
Software product updates that are improvements, extensions, and other changes IBM, at its
discretion, deems to be reasonable.
-
Recommended Service Updates (RSUs), new versions, and new releases at no additional charge.
-
Technical support:
-
A reasonable amount of remote assistance via telephone, mail, facsimile (fax), or e-mail to address
suspected IBM program defects, where available, during normal IBM business hours from Monday through
Friday, except local holidays. Exceptions from normal IBM business hours are Severity 1 (high
impact) problems. Support for high impact suspected IBM defects is available 24 hours a day, 7 days
a week.
-
Temporary fixes for problems (where known), where they exist.
On-site (local) support, although available, is provided as part of the IBM portfolio of fee-based
services.
z/VM S&S annual support charges, based on the number of Value Units specified, will be automatically
added to your order. If you do not desire the S&S license for z/VM and/or the optional features of
DirMaint, RSCS, RACF, or the Performance Toolkit for VM, you must take specific action to decline
this support.
A no-charge S&S registration record will be established on each designated machine where z/VM V5 and
the priced, optional features of DirMaint, RSCS, RACF, and the Performance Toolkit for VM are
running. These no-charge S&S registration records will be linked to the billable S&S and all
billable S&S within the scope of the engine-based Value Units aggregation will be linked together.
Within the scope of an enterprise aggregation, the number of Value Units ordered for the S&S
license(s) must equal the number of Value Units ordered for the OTC license(s).
The quantity ordered cannot exceed the maximum number of processors per server. The number of
processors for a single server to be used to calculate Value Units should not be more than:
Quantity
IFL Standard Maximum
processors processors processors For each server
54 54 54 System z9 EC (2094)
6 3 7 System z9 BC (2096 R07)
7 4 7 System z9 BC (2096 S07)
32 32 32 zSeries 990 (2084)
4 4 4 zSeries 890 (2086)
15 16 16 zSeries 900 (2064)
3 4 4 zSeries 800 (2066)
4 0 4 zSeries Offering for Linux (2066-0FL)
z/VM Subscription and Support (5741-SNS)
Entitlement
identifier Description License option/Pricing metric
S0111PX z/VM V5 SW Subscription and Support ASC
Decline SW S&S No-charge
SW S&S Registration No-charge
S0111R1 DirMaint feature SW Subscription and Support ASC
Decline SW S&S No-charge
SW S&S Registration No-charge
S013T6B RSCS feature SW Subscription and Support ASC
Decline SW S&S No-charge
SW S&S Registration No-charge
S0111R0 RACF feature SW Subscription and Support ASC
Decline SW S&S No-charge
SW S&S Registration No-charge
S0111PZ Performance Toolkit SW Subscription and Support ASC
for VM feature Decline SW S&S No-charge
SW S&S Registration No-charge
The features are for stand-alone product and not for ordering.
z/VM V5.3 Base S&S (5741-SNS) — S0111HH
Orderable
supply ID Language Description
S0111HJ US English z/VM V5.3 3390 Sys DDR (Support for 5741-A05)
z/VM V5.3 Base S&S (5741-SNS) — S0111HK
Orderable
supply ID Language Description
S0111HL US English z/VM V5.3 DVD Sys Image (Support for 5741-A05)
z/VM V5.3 Base S&S (5741-SNS) — S0111H7
Orderable
supply ID Language Description
S0111H8 US English DirMaint feature (Support for 5741-A05)
z/VM V5.3 Base S&S (5741-SNS) — S013T6C
Orderable
supply ID Language Description
S013T6D US English RSCS feature (Support for 5741-A05)
z/VM V5.3 Base S&S (5741-SNS) — S0111HC
Orderable
supply ID Language Description
S0111HD US English RACF Security Server
feature (Support for 5741-A05)
z/VM V5.3 Base S&S (5741-SNS) — S0111HF
Orderable
supply ID Language Description
S0111HG US English Performance Toolkit
for VM feature (Support for 5741-A05)
National Language Translation
When you order z/VM V5.3, the National Language Translation files for message repositories, help
files, and other panels or files are included with the system.
The following components or features are supported by z/VM V5.3 in the following languages:
-
German — CP, CMS (including CMS Utilities), REXX
-
Japanese Kanji — CP, CMS (including CMS Utilities), REXX, PIPES
The DirMaint feature provides National Language translation for DirMaint messages in Kanji and is
automatically included with this feature.
To receive the translated help files for DFSMS/VM in Kanji, you must order the no-charge optional
DFSMS/VM feature using the z/VM V5 System Delivery Option (SDO).
z/VM V5.3 SDO optional licensed products
Program name: z/VM V5.3 SDO
Program number: 5741-A06
The following table provides the orderable supply features for the optional licensed products with
z/VM V5.3.
Orderable supply feature numbers for 5741-A06
Orderable
supply Language Medium Description
S0111RS US English 3480 Tape 5741-A05 3480 3390 Sys DDR
S0111X6 US English 3590 Tape 5741-A05 3590 3390 Sys DDR
S0111RT US English DVD 5741-A05 DVD System Image
S0111X7 US English 3480 Tape 5741-A05 3480 SDO OptProd Aid
S0111X8 US English 3590 Tape 5741-A05 3590 SDO OptProd Aid
S012H91 US English DVD 5741-A05 DVD SDO OptProd Aid
S0111RP US English 3480 Tape 5741-A05 3480 DirMaint
S0111WZ US English 3590 Tape 5741-A05 3590 DirMaint
S0111WX US English DVD 5741-A05 DVD DirMaint
S013TCL US English 3480 Tape 5741-A05 3480 RSCS
S013TCM US English 3590 Tape 5741-A05 3590 RSCS
S013TCK US English DVD 5741-A05 DVD RSCS
S0111RN US English 3480 Tape 5741-A05 3480 RACF Security Server
S0111X5 US English 3590 Tape 5741-A05 3590 RACF Security Server
S0111X4 US English DVD 5741-A05 DVD RACF Security Server
S0111RK US English 3480 Tape 5741-A05 3480 Performance
Toolkit for VM
S0111X2 US English 3590 Tape 5741-A05 3590 Performance
Toolkit for VM
S0111X1 US English DVD 5741-A05 DVD Performance
Toolkit for VM
S0111XZ US English 3480 Tape 5741-A05 3480 DFSMS/VM Feature
S0111Z0 US English 3590 Tape 5741-A05 3590 DFSMS/VM Feature
S0111RV US English 3480 Tape 5648-063 3480 ACF/NCP
S0111RW US English 3590 Tape 5648-063 3590 ACF/NCP
S0111SB US English 3480 Tape 5654-009 3480 ACF/SSP
S0111SC US English 3590 Tape 5654-009 3590 ACF/SSP
S0111VZ US English 3480 Tape 5654-010 3480 ACF/VTAM — VM
S0111W0 US English 3590 Tape 5654-010 3590 ACF/VTAM — VM
S0111TZ US English 3480 Tape 5686-065 3480 ACF/VTAM APPC
S0111TX US English 3590 Tape 5686-065 3590 ACF/VTAM APPC
S0111T3 US English 3480 Tape 5654-010 3480 ACF/VTAM SUITE
S0111T4 US English 3590 Tape 5654-010 3590 ACF/VTAM SUITE
S0111W8 US English 3480 Tape 5648-B33 3480 AFP™ Font Coll
S0111W7 US English 3590 Tape 5648-B33 3590 AFP Font Coll
S0111W9 US English 3480 Tape 5688-228 3480 APL2®
S0111WB US English 3590 Tape 5688-228 3590 APL2
S0123LG US English 3480 Tape 5697-J05 3480 Archive Manager
S0123LH US English 3590 Tape 5697-J05 3590 Archive Manager
S011VVH US English 3480 Tape 5697-J06 3480 Backup/Restore
S011VVJ US English 3590 Tape 5697-J06 3590 Backup/Restore
S0111WC US English 3480 Tape 5684-062 3480 BookMgr Read
S0111WD US English 3590 Tape 5684-062 3590 BookMgr Read
S0111WK US English 3480 Tape 5654-A22 3480 C/C++ for z/VM
S0111WL US English 3590 Tape 5654-A22 3590 C/C++ for z/VM
S0111SF US English 3480 Tape 5688-188 3480 C/370™ Library
S0111SD US English 3590 Tape 5688-188 3590 C/370 Library
S0111WH US English 3480 Tape 5684-160 3480 Callup
S0111WJ US English 3590 Tape 5684-160 3590 Callup
S0111S3 US English 3480 Tape 5648-A25 3480 COBOL
S0111S2 US English 3590 Tape 5648-A25 3590 COBOL
S0111S6 US English 3480 Tape 5697-F42 3480 DB2 ControlCtr
S0111S7 US English 3590 Tape 5697-F42 3590 DB2 ControlCtr
S0111SV US English 3480 Tape 5697-F42 3480 DB2 Data Res
S0111ST US English 3590 Tape 5697-F42 3590 DB2 Data Res
S0111V8 US English 3480 Tape 5697-F42 3480 DB2 RXSQL VM
S0111V9 US English 3590 Tape 5697-F42 3590 DB2 RXSQL VM
S0111T2 US English 3480 Tape 5697-F42 3480 DB2 Svr for VM
S0111T1 US English 3590 Tape 5697-F42 3590 DB2 Svr for VM
S0111TC US English 3480 Tape 5748-XX9 3480 DCF
S0111TD US English 3590 Tape 5748-XX9 3590 DCF
S0111T8 US English 3480 Tape 5748-XX9 3480 DCF/ODF
S0111T7 US English 3590 Tape 5748-XX9 3590 DCF/ODF
S0111T9 US English 3480 Tape 5748-XX9 3480 DCF/SMFF
S0111TB US English 3590 Tape 5748-XX9 3590 DCF/SMFF
S011F02 US English 3480 Tape 5654-A23 3480 Debug Tool
S011F03 US English 3590 Tape 5654-A23 3590 Debug Tool
S013T9K US English 3480 Tape 5648-DR1 3480 Dir-V5.20 Base
S013T9L US English 3590 Tape 5648-DR1 3590 Dir-V5.20 Base
S013T9P US English 3480 Tape 5648-DR1 3480 Dir-V5.20 z/VM Ctr
S013T9R US English 3590 Tape 5648-DR1 3590 Dir-V5.20 z/VM Ctr
S013T9M US English 3480 Tape 5648-DR1 3480 Dir-V5.20 SDPE
S013T9N US English 3590 Tape 5648-DR1 3590 Dir-V5.20 SDPE
S012BHV US English 3480 Tape 5648-F08 3480 Dir-V5.10 w/Cons
S012BHW US English 3590 Tape 5648-F08 3590 Dir-V5.10 w/Cons
S012BHL US English 3480 Tape 5648-F08 3480 EWLM Win/Sol
S012BHM US English 3590 Tape 5648-F08 3590 EWLM Win/Sol
S012BHP US English 3480 Tape 5648-F08 3480 EWLM Other
S012BHR US English 3590 Tape 5648-F08 3590 EWLM Other
S012H92 US English 3480 Tape 5648-F08 3480 RDS
S012H93 US English 3590 Tape 5648-F08 3590 RDS
S0111S9 US English 3480 Tape 5648-099 3480 DITTO-VSE&OPTVM
S0111S8 US English 3590 Tape 5648-099 3590 DITTO-VSE&OPTVM
S0111TJ US English 3480 Tape 5654-029 3480 DITTO/ESA — VM
S0111TH US English 3590 Tape 5654-029 3590 DITTO/ESA — VM
S0111TG US English 3480 Tape 5648-099 3480 DITTO/ESA — VSE
S0111TF US English 3590 Tape 5648-099 3590 DITTO/ESA — VSE
S0111TK US English 3480 Tape 5684-113 3480 DMS/CMS
S0111TL US English 3590 Tape 5684-113 3590 DMS/CMS
S0111V5 US English 3480 Tape 5654-260 3480 EREP
S0111V4 US English 3590 Tape 5654-260 3590 EREP
S0111VC US English 3480 Tape 5668-801 3480 GDDM®/IMD
S0111VB US English 3590 Tape 5668-801 3590 GDDM/IMD
S0111VD US English 3480 Tape 5668-723 3480 GDDM/IVU
S0111VF US English 3590 Tape 5668-723 3590 GDDM/IVU
S0111VG US English 3480 Tape 5668-812 3480 GDDM/PGF
S0111VH US English 3590 Tape 5668-812 3590 GDDM/PGF
S0111VJ US English 3480 Tape 5684-168 3480 GDDM/VM
S0111VK US English 3590 Tape 5684-168 3590 GDDM/VM
S0111VM US English 3480 Tape 5696-234 3480 HLASM V1.5
S0111VL US English 3590 Tape 5696-234 3590 HLASM V1.5
S0111VN US English 3480 Tape 5696-234 3480 HLASM V1.5 Toolkit
S0111VP US English 3590 Tape 5696-234 3590 HLASM V1.5 Toolkit
S0111VX US English 3480 Tape 5684-157 3480 Host Mgmt Fac
S0111VW US English 3590 Tape 5684-157 3590 Host Mgmt Fac
S0111WF US English 3480 Tape 5654-033 3480 IBM C — VM/ESA
S0111WG US English 3590 Tape 5654-033 3590 IBM C — VM/ESA
S0111TR US English 3480 Tape 5684-042 3480 ICKDSF SES/E
S0111TP US English 3590 Tape 5684-042 3590 ICKDSF SES/E
S0111TT US English 3480 Tape 5684-043 3480 ISPF V3 ENU
S0111TS US English 3590 Tape 5684-043 3590 ISPF V3 ENU
S0111TV US English 3480 Tape 5684-123 3480 ISPF/PDF V3
S0111TW US English 3590 Tape 5684-123 3590 ISPF/PDF V3
S0111T5 US English 3480 Tape 5688-035 3480 NPSI X.25
S0111T6 US English 3590 Tape 5688-035 3590 NPSI X.25
S013JSS US English 3480 Tape 5698-A36 3480 OMEGAMON® XE
S013JS6 US English 3590 Tape 5698-A36 3480 OMEGAMON XE
S0123LJ US English 3480 Tape 5697-J10 3480 Operations Manager
S0123LK US English 3590 Tape 5697-J10 3590 Operations Manager
S0111V2 US English 3480 Tape 5684-100 3480 Pass-Through
S0111V3 US English 3590 Tape 5684-100 3590 Pass-Through
S0111W6 US English 3480 Tape 5688-235 3480 PL/I
S0111W5 US English 3590 Tape 5688-235 3590 PL/I
S0111V0 US English 3480 Tape 5688-190 3480 PPFA/370
S0111V1 US English 3590 Tape 5688-190 3590 PPFA/370
S0111TN US English 3480 Tape 5684-141 3480 PSF/VM
S0111TM US English 3590 Tape 5684-141 3590 PSF/VM
S0111V6 US English 3480 Tape 5697-F42 3480 QMF™ for VM
S0111V7 US English 3590 Tape 5697-F42 3590 QMF for VM
S0111VT US English 3480 Tape 5695-013 3480 REXX/370 Complr
S0111VV US English 3590 Tape 5695-013 3590 REXX/370 Complr
S0111W2 US English 3480 Tape 5695-014 3480 REXX/370 Lib
S0111W1 US English 3590 Tape 5695-014 3590 REXX/370 Lib
S011VVK US English 3480 Tape 5697-J08 3480 Tape Manager
S011VVL US English 3590 Tape 5697-J08 3590 Tape Manager
S0111S4 US English 3480 Tape 5648-B02 3480 VisualAgeGenSer
S0111S5 US English 3590 Tape 5648-B02 3590 VisualAgeGenSer
S0111SG US English 3480 Tape 5684-137 3480 VM Batch Facilit
S0111SH US English 3590 Tape 5684-137 3590 VM Batch Facilit
S0111SP US English 3480 Tape 5668-806 3480 VS FORTRAN
S0111SN US English 3590 Tape 5668-806 3590 VS FORTRAN
S0111SS US English 3480 Tape 5668-767 3480 VS PASCAL
S0111SR US English 3590 Tape 5668-767 3590 VS PASCAL
S0111SW US English 3480 Tape 5668-717 3480 VS Pascal Lib
S0111SX US English 3590 Tape 5668-717 3590 VS Pascal Lib
S0111VS US English 3480 Tape 5686-065 3480 VSE/VTAM V4 VM
S0111VR US English 3590 Tape 5686-065 3590 VSE/VTAM V4 VM
S0111W4 US English 3480 Tape 5686-065 3480 VSE/VTAM V4 VSE
S0111W3 US English 3590 Tape 5686-065 3590 VSE/VTAM V4 VSE
Preinstalled products and features
-
EREP and ICKDSF.
The prerequisite no-charge products,
EREP
(5654-260) and
ICKDSF
(5684-042) are preinstalled on the base product system DDRs. If you intend to use EREP or ICKDSF
now or at a later date, you must establish a license for billing and shipment of publications by
placing an order for each of these products. Because the product code is already preinstalled, your
order should indicate that shipment of media should be suppressed for these products. This can be
accomplished by including the Delivery Option feature number 3471 (Ship Documentation Only) which
designates the shipment of:
-
Language Environment.
Language Environment
is integrated into the base of z/VM V5.3.
-
HCD and HCM.
HCD and HCM
provides a comprehensive I/O configuration management environment, similar to that available with
the z/OS operating system. HCD and HCM is delivered preinstalled into the base of z/VM V5.3,
enabled for use, and is available at no additional charge.
-
OpenExtensions Shell and Utilities.
OpenExtensions Shell and Utilities
is included in z/VM V5.3 with no licensing or billing requirements.
-
CMS Utilities.
CMS Utilities
is included in z/VM V5.3 at no additional charge.
-
Open Systems Adapter Support Facility (OSA/SF).
OSA/SF
(V4.4.0) is a host-based tool supporting OSA-2 and OSA-Express features and is included in z/VM V5.3
later, with no licensing or billing requirements.
-
TCP/IP for z/VM and NFS.
The
TCP/IP base
and the
Network File System (NFS) feature of TCP/IP
are delivered preinstalled, enabled for use, and are available at no additional charge.
-
RSCS feature.
RSCS V3.2.0 (5684-096) has been repackaged and is now available for licensing under International
Program License Agreement (IPLA) terms and conditions. RSCS Function Level 530 (FL530) is
available as an priced, optional feature. Pricing is based on engine-based Value Units, and can be
licensed on IFL and standard processor processors. RSCS FL530 is preinstalled with z/VM V5.3, in a
disabled state. If you intend to use RSCS for more than operating network-attached printers now or
at a later date, you must establish a license for billing and shipment of publications. A license
is established for RSCS FL530 by placing an order for the feature. Because the product code is
already preinstalled, you will not receive any additional code.
-
DirMaint, RACF Security Server, and the Performance Toolkit for VM optional features for z/VM V5.
DirMaint,
RACF Security Server,
and the
Performance Toolkit for VM
optional features for z/VM V5.3 are preinstalled in a disabled state. If you intend to use any one
of these features, now or at a later date, you must establish a license for billing and shipment of
publications. Enablement instructions are provided in the program directory for each feature to
enable the feature for use on your system. A license is established by placing an order for the
feature.
z/VM V5.3 (5741-A05) Temporary Use Charge
Entitlement
identifier Description License option/Pricing metric
S0111PP z/VM V5 On/Off CoD, Per Processor
S0111PH DirMaint feature On/Off CoD, Per Processor
S013T68 RSCS feature On/Off CoD, Per Processor
S0111PL RACF feature On/Off CoD, Per Processor
S0111PT Performance Toolkit On/Off CoD, Per Processor
for VM feature
Back to top
The information provided in this announcement letter is for reference and convenience purposes only.
The terms and conditions that govern any transaction with IBM are contained in the applicable
contract documents such as the IBM International Program License Agreement, IBM International
Passport Advantage® Agreement, and IBM Agreement for Acquisition of Software Maintenance.
Licensing:
IBM International Program License Agreement including the License Information (LI) document and
Proof of Entitlement (PoE) govern your use of the program. PoEs are required for all authorized
use.
Agreement for Acquisition of Software Maintenance
The following agreement applies for maintenance and does not require customer signatures:
-
IBM Agreement for Acquisition of Software Maintenance
(Z125-6011)
These programs are licensed under the IBM Program License Agreement (IPLA) and the associated
Agreement for Acquisition of Software Maintenance, which provides for support with ongoing access to
releases and versions of the program. These programs have a one-time license charge for use of the
program and an annual renewable charge for the enhanced support that includes telephone assistance
(voice support for defects during normal business hours) as well as access to updates, releases, and
versions of the program as long as support is in effect.
System z, IBM eServer zSeries, and S/390 IBM Operational Support Services — SoftwareXcel is an
option for those customers who desire added services.
Limited warranty applies:
Yes
Limited warranty:
IBM warrants that when the program is used in the specified operating environment it will
conform to its specifications. The warranty applies only to the unmodified portion of the program.
IBM does not warrant uninterrupted or error-free operation of the program or that IBM will correct
all program defects. You are responsible for the results obtained from the use of the program.
IBM provides you with access to IBM databases containing information on known program defects,
defect corrections, restrictions, and bypasses at no additional charge. Consult the IBM Software
Support Guide for further information at
IBM will maintain this information for at least one year after the
original licensee acquires the program ("Warranty Period").
Program support:
Enhanced support, called Subscription and Support, includes
telephone assistance (voice support for defects during normal business
hours), as well as access to updates, releases, and versions of the
program as long as support is in effect. You will be notified of
discontinuance of support with 12 months' notice.
Money-back guarantee:
If for any reason you are dissatisfied with the program and you are
the original licensee, you may obtain a refund of the amount you paid for
it, if within 30 days of your invoice date you return the program and its
PoE to the party from whom you obtained it. If you downloaded the
program, you may contact the party from whom you acquired it for
instructions on how to obtain the refund.
For clarification, note that for programs acquired under any of IBM's
On/Off Capacity on Demand (On/Off CoD) software offerings, this term does
not apply since these offerings apply to programs already acquired and in
use by you.
Authorization for Use on Home/Portable Computer:
You may not copy and use this program on another computer without
paying additional license fees.
Volume orders (IVO):
No
Passport Advantage applies:
No
Usage restriction:
Yes
-
z/VM V5 supports z9 EC, z9 BC, z990, z900, z890, and z800. For
information about specific z/VM machine requirements and programming
requirements, refer to the
z/VM: General Information
(GC24-6095)
-
Your entitlement is for only the quantity of engine-based Value Units
licensed. These engine-based Value Units can be for either standard or
IFL processors.
-
Only Linux workloads in an LPAR or Linux guests of z/VM V5 can operate on
the IFL processors and they cannot run other IBM operating systems except
z/VM V4 or z/VM V5.
-
When ordering z/VM V5 or the optional features to operate on any of the
standard processors (CPs), you must order Value Units equal to the number
of Value Units for the total number of standard processors (CPs) on your
z9 EC, z9 BC, z990, z900, z890, and z800.
-
When ordering z/VM V5 or the optional features to operate on IFL
processors, you must order Value Units equal to the number of Value Units
for the total number of IFL processors on your z9 EC, z9 BC, z990, z900,
z890, and z800.
-
When ordering z/VM V5 or the optional features to operate on standard
processors (CPs)
and
IFL processors, you must order Value Units equal to the total number of
Value Units for the total number of processors (standard plus IFL) on
your z9 EC, z9 BC, z990, z900, z890, and z800.
-
z/VM V5.3 operates on the z9 EC, z9 BC, z990, z890, z900, and z800.
The program requires hardware that implements the IBM 64-bit
z/Architecture in order to execute properly and therefore you are not
authorized to install or use this program on any machine that does not
properly implement 64-bit z/Architecture. For information about specific
z/VM machine requirements and programming requirements, see the z/VM:
General Information manual, GC24-6095.
-
You may only transfer the program to another party, in connection with
your transfer of the machine on which you are entitled to operate the
program (referred to as a "Limited Transfer"), provided that any such
Limited Transfer of the program requires you to transfer your rights and
obligations under the Agreement to the transferee and therefore
terminates your authorization to continue to use the program. When the
machine and the program are transferred, you must either provide a
printed copy of the Agreement or, if electronic licensing is used for the
program, take the necessary actions that will require electronic
acceptance of the Agreement by the transferee prior to the transferee's
first use of the program.
Software Maintenance applies:
No
For operating system software, the revised IBM Operational Support
Services — SoftwareXcel offering will provide support for those
operating systems and associated products that are not available with the
newly announced Software Maintenance offering. This will ensure total
support coverage for your enterprise needs, including IBM and selected
non-IBM products. For complete lists of products supported under both
the current and revised SoftwareXcel offering, visit
For additional information on the revised IBM Operational Support
Services, refer to
Services Announcement
601-023
, dated July 10, 2001.
IBM Operational Support Services — SoftwareXcel:
Yes
System i™ Software Maintenance applies:
No
Variable charges apply:
No
Educational allowance available:
Yes. A 15% education allowance applies to qualified education
institution customers.
SVC is only applicable when running on standard processors and the
maximum time for which it applies is for 12 months.
The SVC offering is valid only while both the predecessor product and the
replacement product are:
-
Both running on the same CPU
-
Licensed under the same IBM customer number
-
In the process of being migrated from the older product to the newer one
by the customer
-
Providing the same function
Note:
When the SVC offering meets these requirements, you must order the
appropriate number of Value Units for z/VM V5.3 to be eligible.
Products eligible for Single Version Charging (SVC)
Replaced programs Replacement programs
Program Program Program Program
number name number name
5654-A17 z/VM Version 3 5741-A05 z/VM V5.3
5654-030 VM/ESA Version 2 5741-A05 z/VM V5.3
5684-112 VM/ESA Version 1 5741-A05 z/VM V5.3
5664-167 VM/SP 5741-A05 z/VM V5.3
5664-173 VM/SP HPO 5741-A05 z/VM V5.3
5664-301 VM/IS Base (Core) 5741-A05 z/VM V5.3
5664-308 VM/XA SP 5741-A05 z/VM V5.3
5735-FAL TCP/IP Version 2 5741-A05 z/VM V5.3
5798-FAL TCP/IP Version 1 5741-A05 z/VM V5.3
5796-PNA VM Realtime Monitor 5741-A05 z/VM V5.3
5664-191 VMMAP 5741-A05 z/VM V5.3
5798-DWD RealTime Monitor VM/ESA 5741-A05 z/VM V5.3
5684-073 VMPRF 5741-A05 z/VM V5.3
5748-XE4 DirMaint 5741-A05 z/VM V5.3
5740-XXH RACF 5741-A05 z/VM V5.3
5664-188 RSCS V2 5741-A05 z/VM V5.3
5684-096 RSCS V3 5741-A05 z/VM V5.3
5688-198 Language Environment/370 5741-A05 z/VM V5.3
5706-116 DFSMS/VM 5741-A05 z/VM V5.3
5668-911 OS/PL/I V2 Library 5741-A05 z/VM V5.3
5734-LM4 OS PL/I Resident Library 5741-A05 z/VM V5.3
5734-LM5 OS PL/I Transient Library 5741-A05 z/VM V5.3
5688-022 VS COBOL II Library Only 5741-A05 z/VM V5.3
5668-940 VS COBOL II Library Only 5741-A05 z/VM V5.3
5740-LM1 OS/VS COBOL Library Only 5741-A05 z/VM V5.3
5688-039 C/370 Library 5741-A05 z/VM V5.3
On/Off Capacity on Demand
To be eligible for On/Off Capacity on Demand pricing, you must be enabled for temporary capacity on
the corresponding hardware, and the required contract, Attachment for Customer Initiated Upgrade and
IBM eServer On/Off Capacity on Demand — Software (Z125-6611) must be signed prior to use.
Back to top
IBM has transformed its delivery of hardware and software support services to put you on the road to
higher system availability. Electronic Services is a Web-enabled solution that offers an exclusive,
no-additional-charge enhancement to the service and support available for IBM servers. These
services provide the opportunity for greater system availability with faster problem resolution and
preemptive monitoring. Electronic Services comprises two separate, but complementary, elements:
Electronic Services news page and Electronic Services Agent.
The Electronic Services news page is a single Internet entry point that replaces the multiple entry
points traditionally used to access IBM Internet services and support. The news page enables you to
gain easier access to IBM resources for assistance in resolving technical problems.
The Electronic Service Agent™ is no-additional-charge software that resides on your server. It
monitors events and transmits system inventory information to IBM on a periodic, client-defined
timetable. The Electronic Service Agent automatically reports hardware problems to IBM. Early
knowledge about potential problems enables IBM to deliver proactive service that may result in
higher system availability and performance. In addition, information collected through the Service
Agent is made available to IBM service support representatives when they help answer your questions
or diagnose problems.
To learn how Electronic Services can work for you, visit
Back to top
The prices provided in this announcement are suggested retail prices for
the U.S. only and are provided for your information only. Dealer prices
may vary, and prices may also vary by country. Prices are subject to
change without notice. For additional information and current prices,
contact your local IBM representative.
Information on charges is available at
Choose the option entitled "Purchase / upgrade tools."
The products and features in this announcement have one pricing metric
— Value Units based on the number of processors. The change applies
only to the z/VM V5.3 base and the priced, optional features of DirMaint,
RSCS RACF, and the Performance Toolkit for VM and the S&S entitlements at
the initial order.
Program name:
z/VM Version 5 Release 3
Program number:
5741-A05
Entitlement License option/
identifier Description Pricing metric
S0111PP z/VM V5 Use-based OTC, Per Value Unit
S0111PH DirMaint feature Use-based OTC, Per Value Unit
S013T68 RSCS feature Use-based OTC, Per Value Unit
S0111PL RACF feature Use-based OTC, Per Value Unit
S0111PT Performance Toolkit Use-based OTC, Per Value Unit
for VM feature
Subscription and Support PID:
5741-SNS
Entitlement License option/
identifier Description Pricing metric
S0111PX z/VM V5 SW Subscription and Support ASC
Decline SW S&S No-charge
SW S&S Registration No-charge
S0111R1 DirMaint feature SW Subscription and Support ASC
Decline SW S&S No-charge
SW S&S Registration No-charge
S013T6B RSCS feature SW Subscription and Support ASC
Decline SW S&S No-charge
SW S&S Registration No-charge
S0111R0 RACF feature SW Subscription and Support ASC
Decline SW S&S No-charge
SW S&S Registration No-charge
S0111PZ Performance Toolkit SW Subscription and Support ASC
for VM feature Decline SW S&S No-charge
SW S&S Registration No-charge
On/Off Capacity on Demand — Temporary Use Charge (TUC)
z/VM V5.3 (5741-A05) Temporary Use Charge
Entitlement
identifier Description License option/Pricing metric
S0111PP z/VM V5 On/Off Capacity on Demand,
Per Processor
S0111PH DirMaint feature On/Off Capacity on Demand,
Per Processor
S013T68 RSCS feature On/Off Capacity on Demand,
Per Processor
S0111PL RACF feature On/Off Capacity on Demand,
Per Processor
S0111PT Performance Toolkit On/Off Capacity on Demand,
for VM feature Per Processor
IBM Global Financing
IBM Global Financing offers competitive financing to credit-qualified customers to assist them in
acquiring IT solutions. Offerings include financing for IT acquisition, including hardware,
software, and services, from both IBM and other manufacturers or vendors. Offerings (for all
customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by
country. Contact your local IBM Global Financing organization or visit
IBM Global Financing offerings are provided through IBM Credit LLC in the
United States, and other IBM subsidiaries and divisions worldwide to
qualified commercial and government customers. Rates are based on a
customer's credit rating, financing terms, offering type, equipment type,
and options, and may vary by country. Other restrictions may apply.
Rates and offerings are subject to change, extension, or withdrawal
without notice.
For more financing information, visit
Back to top
To order, contact the Americas Call Centers, your local IBM
representative, or your IBM Business Partner.
To identify your local IBM representative or IBM Business Partner, call
800-IBM-4YOU (426-4968).
Phone: 800-IBM-CALL (426-2255)
Fax: 800-2IBM-FAX (242-6329)
Internet: callserv@ca.ibm.com
Mail: IBM Americas Call Centers
Dept. Teleweb Customer Support, 9th floor
105 Moatfield Drive
North York, Ontario
Canada M3B 3R1
Reference: LE001
The Americas Call Centers, our national direct marketing organization,
can add your name to the mailing list for catalogs of IBM products.
Note:
Shipments will begin after the planned availability date.
Trademarks
-
-
System z, DirMaint, System Storage, System z9, MVS, Redbooks,
z/Architecture, FICON, Virtualization Engine, Resource Link, ECKD,
System/370, AFP, C/370, QMF, System i, and Electronic Service Agent are
trademarks of International Business Machines Corporation in the United
States or other countries or both.
-
-
z/VM, RACF, zSeries, z/OS, z/VSE, eServer, BookManager, Language
Environment, DFSMS/VM, DB2, RS/6000, ESCON, Tivoli, VM/ESA, ACF/VTAM,
VTAM, FlashCopy, S/390, APL2, GDDM, OMEGAMON, and Passport Advantage are
registered trademarks of International Business Machines Corporation in
the United States or other countries or both.
-
-
Java is a trademark of Sun Microsystems, Inc.
-
-
Linux is a trademark of Linus Torvalds in the United States, other
countries or both.
-
-
Other company, product, and service names may be trademarks or service
marks of others.
At a glance
