IBM Communication Controller for Linux on System z9 and zSeries V1.2 extends NCP connectivity in the
Linux environment
IBM United States
Software Announcement 205-267
October 25, 2005
 ENUS205-267.PDF (49KB)
|
(Corrected on November 14, 2005)
The Customer responsibilities section was revised.
Communication Controller for Linux on System z9 and zSeries delivers a migration path for IBM 37xx
Communication Controller and SNA functions in Linux on System z9 and zSeries, it:
-
Introduces CDLC support for channel connectivity to z/OS, z/VM, VSE, and TPF
-
Supports NCP dump/load/restart over CDLC
-
Adds a new X.25 NPSI enablement interface which allows vendors to write plug-in support to transport
X.25 over a TCP/IP network (XOT)
-
Implements a new IP Transmission Group (IPTG) to efficiently transport subarea SNA data over a
TCP/IP network
-
Supports LAN connectivity via Layer 2 routing over OSA-Express
-
Can improve performance through reduced CPU utilization and increased throughput
For ordering, contact:
Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at
800-IBM-CALL
(Reference: YE001).
Back to top
In our global, dynamic and complex marketplace, an enterprise's business performance depends on the
ability to communicate constantly, reliably, and at high speeds. Its business ability to outperform
competitors, gain leadership in existing markets, and move boldly in the creation and pursuit of new
opportunities relies on optimizing communications and networking capabilities in combination with
cost-effective, managed operations.
IBM communication software already supports the efficient operation of the Fortune 500, the Global
1000, as well as small and medium businesses around the world. IBM Communication Controller for
Linux™ on System z9™ and zSeries® offers new options and new functionality for the global
marketplace.
Communication Controller for Linux on System z9 and zSeries allows customers to keep their business
data and applications on the mainframe (z/OS®, z/VM®, VSE, and TPF) while moving Network Control
Program (NCP) functions (and the associated CPU cycles) to Linux on System z9 and zSeries.
Communication Controller for Linux is software that runs on Linux on System z9 and zSeries, and
allows customers to run NCP on top of it. Its migration path for enterprises using traditional
Systems Network Architecture (SNA) includes SNA Network Interconnect (SNI) to communicate with their
customers and Business Partners. In addition, Communication Controller for Linux supports a SNA
migration evolving towards simplified networks inclusive of IP network infrastructure and enhanced
hardware independence, while continuing to operate and leverage the value in existing SNA
application portfolios.
New Communication Controller for Linux V1.2 functions:
-
Channel datalink control (CDLC) support using an OSA-Express2 in Network Control Program (OSN) mode
delivers direct connectivity between Communication Controller for Linux and operating systems,
including z/OS, VSE, z/VM, and TPF.
-
X.25 NPSI enablement interface, allowing a software vendor to deliver support for X.25 over a TCPIP
(XOT) network.
-
IPTG is an efficient TCP/IP connection to establish SNA connections to other IPTG endpoints.
-
Exploitation of Layer 2 support for OSA-Express CHPID-type OSD.
-
Enhanced performance through optimized IBM Communication Controller for Linux internal processing
improvements can reduce CPU utilization and increases throughput.
Back to top
Refer to the
Hardware requirements
and
Software requirements
sections for details.
Back to top
-
October 28, 2005: Electronic software delivery
-
November 11, 2005: Media and documentation
Back to top
Communication Controller on Linux is software, a virtualized communication controller running on IBM
System z9 and zSeries machines that in turn run the Linux operating system. This integration of
established, mission-critical communications and leading-edge IBM System z9 and zSeries servers and
software allows the continued use of mature and stable SNA software (NCP and SNA applications) in
combination with the openness of Linux and the security, scalability, and business resiliency of the
System z9 and zSeries.
Moving NCP functions to the System z9 and zSeries can allow the SNA network to continue to be
consolidated into the server, more closely integrating z/OS applications and SNA with the NCP. This
evolutionary migration can allow not only network simplification, but also the continuing use of
critical SNA applications.
Function
Communication Controller for Linux on System z9 and zSeries can provide an alternative platform for
running NCP software, in place of many configurations where customers currently use an IBM 37xx
hardware environment. Specifically, the functions in this release include:
-
An interface for vendor-written plug-ins in support of X.25 NPSI.
-
CDLC using an OSA-Express2 for NCP (OSN).
-
Performance improvements which lower CPU utilization and increase throughput.
-
SNA connectivity over OSA Express fiber ports based on OSA Express layer 2 switch technology.
-
IP connectivity between two CCL NCPs.
-
SNA Network Interconnection (SNI).
-
Intermediate Network Node (INN).
-
Boundary Network Node (BNN).
-
Extended Recovery Facility (XRF) and Network Routing Facility (NRF).
-
SSCP Takeover and Giveback.
-
Generation and utility support for the NCP that is installed in the Communication Controller for
Linux on System z9 and zSeries is provided through Advanced Communication Function (ACF) System
Support Program (SSP).
-
Monitoring, real-time analysis, and interactive tuning of internal NCP resources in the Linux
environment through NTuneMON.
-
Support for NetView® Performance Monitor (NPM).
-
Support of NCP dumping and restarting functions with faster availability.
-
Communication Controller for Linux MOSS console via an easily-accessible browser.
System z9 and zSeries strengths
In addition to the NCP functionality, you now have the advantage of the product running in Linux on
System z9 and zSeries. You can run Communication Controller for Linux on System z9 and zSeries with
Linux running in native LPAR or as a guest running under z/VM. zSeries offers an attractive option
for customers who want to use IBM's Integrated Facility for Linux (IFL) and z/VM which can support a
range of many images per processor. A controller can be created or started based on the demands of
your network; if you need another controller, you just start another instance, which may be in the
same Linux image. You may also run in different Linux images for high availability. In addition to
help reduce the dependency on IBM 37xx hardware, lower-speed network connectivity such as token ring
or ESCON® hardware can be replaced with high-speed OSA-Express adapters coming into the zSeries
machine. NCP code remains unchanged.
Simplified migration
The support of existing, unmodified NCP software helps simplify migration to Communication
Controller for Linux on System z9 and zSeries from the IBM 37xx Communication Controller.
Definition updates, if required, are simple, for example adding a line definition for your OSA
adapter. And the updates are required only at the NCP moving into Linux on zSeries; in most cases
there are no coordinated changes required by business partners. From an operational point of view,
Communication Controller for Linux on System z9 and zSeries provides interfaces that allow you to
load, operate, manage, and dump NCPs. The Communication Controller for Linux on System z9 and
zSeries has its own MOSS console, which is used to manage and operate NCPs running on Linux such as
starting and stopping the Communication Controller, dumping NCP or the Communication Controller, and
displaying and altering storage. These are now provided via an easily accessible browser interface.
Communication Controller for Linux on System z9 and zSeries is a software product that emulates the
IBM 3745 hardware. By offering an alternative platform for running NCP software, Communication
Controller for Linux on System z9 and zSeries can offer a possible migration path from the following
IBM 37xx hardware products:
-
IBM 3705 Communication Controller
-
IBM 3720 Communication Controller
-
IBM 3725 Communication Controller
-
IBM 3745 Communication Controller
-
IBM 3746-900 Nways® Multiprotocol Controller
For additional information on IBM Communication Controller for Linux on zSeries V1.1, refer to
Software Announcement
205-030
, dated February 15, 2005.
Accessibility by people with disabilities
Vision impaired users:
-
Supports interfaces commonly used by screen readers
-
Can be operated using only the keyboard
-
Supports customization of display attributes such as color, contrast, and font size
-
Communicates all information independently of color
-
Supports interfaces commonly used by screen magnifiers
-
Supports the attachment of alternative output devices
-
Provides documentation in an accessible format
Users with mobility impairments or limited hand use:
-
Can be operated using only the keyboard
-
Supports the attachment of alternative input and output devices
This product does not have audio features in its interface, and does not flash the screen at rates
that could induce epileptic seizures
Back to top
Communication Controller for Linux on System z9 and zSeries, a business solution, benefits NCP
customers running an IBM 37xx Communication Controller. Enterprises that need to continue to
support critical SNA connectivity such as SNA Network Interconnect (SNI) to their business partners,
and X.25 will appreciate the new features of Communication Controller for Linux on System z9 and
zSeries.
Communications Controller for Linux on System z9 and zSeries is the solution for companies that want
to:
-
Help preserve their traditional SNA environment without IBM 3745 and 3746 Communication Controller
hardware
-
Help extend existing SNA applications over TCP/IP networks
-
Help improve network availability by replacing token ring network and ESCON channels with Ethernet
network and OSA-Express hardware
-
Consolidate all servers onto a single System z9 or zSeries mainframe
-
Consolidate SNA skills to a centralized location
-
Migrate off their IBM 37xx hardware without requiring coordinated migration on the part of their
business partners
-
Build a Disaster Recovery site without acquiring additional 3745s
-
Take advantage of excess capacity on System z9 or zSeries
-
Help maximize scalability and efficiency through z/VM technology, which dynamically provisions
additional virtual servers and controls the sharing of processors and other resources
Complementing IBM's Communication Controller for Linux are the products in the IBM Communications
Server family. The products in the Communications Server family offer additional SNA and TCP/IP
functions that can help with SNA/IP integration. For more information about these products and how
they can help your enterprise, visit
Back to top
It is IBM's intent that Data Link Switching (DLSw) will be enabled in the future for Communication
Controller for Linux on System z9 and zSeries V1R2. For more information on this product, refer to
All statements regarding IBM's plans, directions, and intent are subject
to change or withdrawal without notice.
Trademarks
-
-
System z9 is a trademark of International Business Machines Corporation
in the United States or other countries or both.
-
-
zSeries, z/OS, z/VM, NetView, ESCON, and Nways are registered trademarks
of International Business Machines Corporation in the United States or
other countries or both.
-
-
Linux is a trademark of Linus Torvalds in the United States, other
countries or both.
-
-
Other company, product, and service names may be trademarks or service
marks of others.
Back to top
Product information is available via the Offering Information Web site
Also, visit the Passport Advantage® Web site
Back to top
No hardcopy publications are shipped with this product. The
Communication Controller for Linux™ on System z9™ and
zSeries® Implementation and User's Guide
is included in softcopy.
Back to top
Specified operating environment
Hardware requirements
Runs on the following IBM servers, or equivalent:
-
IBM System z9
-
IBM
zSeries z800, z890,
z900, z990
-
S/390 Parallel Enterprise Servers — Generation 5 (G5) and Generation 6 (G6) models
Requirements for the different connectivity options (Note: the owning VTAM® needs to connect to
Communication Controller for Linux NCP over a LAN or CDLC connection):
-
CDLC requires Open Systems Adapter for NCP (OSN) support
-
System z9 server with associated system software:
-
z/OS® V1.4, or higher, with APARs OA11238 and OA07875 (for OSN CHPID support in IOS and HCD)
-
z/VM® V5.1, or higher: VM63722 (for OSN CHPID support on z/VM)
-
OSA-Express2 features with OSN support:
-
3364 OSA-Express2 LX Gigabit Ethernet
-
3365 OSA-Express2 SX Gigabit Ethernet
-
3366 OSA-Express2 1000Base-T Ethernet
-
LAN (LCS Ethernet or token ring)
-
2 OSA copper LAN ports (OSA-2 or OSA-Express (at least MCL level 3.50 for z900 and z800, and 5.50
for z990 and z890)):
-
1 port in LCS mode for Linux
-
1 port in LSA mode for z/OS
-
OSA/SF to configure the OSA LAN connectivity, if applicable.
-
LAN over Layer 2
-
IBM zSeries 990 and 890 or later server with associated system software:
-
z/VM V5.1 with Layer 2 support in PTF for APAR VM63538. Refer to the 2084/2086 PSP buckets for any
additional required service.
-
OSA Express features with layer 2 routing support:
-
1364 OSA-Express LX Gigabit Ethernet
-
1365 OSA-Express SX Gigabit Ethernet
-
1366 OSA-Express 1000Base-T Ethernet
-
2364 OSA-Express LX Gigabit Ethernet
-
2365 OSA-Express SX Gigabit Ethernet
-
2366 OSA-Express Fast Ethernet
-
3364 OSA-Express2 LX Gigabit Ethernet
-
3365 OSA-Express2 SX Gigabit Ethernet
-
3366 OSA-Express2 1000Base-T Ethernet
-
3368 OSA-Express2 10 Gigabit Ethernet
-
X.25
-
An XOT capable router (and a TCP/IP connection to it)
-
IP TG
-
TCP/IP connection to each partner Communication Controller for Linux
Memory and fixed storage capacity
-
50 MB DASD for Communication Controller for Linux on System z9 and zSeries and Java™ code
-
300 MB DASD for Linux kernel source
-
80 MB to 100 MB DASD per Communication Controller for Linux on System z9 and zSeries instance for
traces, dumps, logs, and NCP load modules
-
20 MB RAM per Communication Controller for Linux on System z9 and zSeries instance
Software requirements
-
NCP V7R5 or later, and an environment (z/VM, VSE, z/OS) to generate NCP load modules
-
ACF/SSP V4R5, and later (5655-041, 5654-009, 5686-064)
-
If X.25 support is used:
-
NPSI V3R8, or later (the release that corresponds to your NCP release)
-
XOT server software, provided by an ISV
-
One of the following Linux on System z9 and zSeries distributions with recent maintenance:
-
SUSE LINUX Enterprise Server 8 (31-bit and 64-bit) for IBM zSeries and IBM S/390® (SLES8) +
Service Pack 4 (SP4)
-
SUSE LINUX Enterprise Server 9 (31-bit and 64-bit) for IBM zSeries and IBM S/390 (SLES9) + Service
Pack 2 (SP2®)
-
Red Hat Enterprise Linux V4 (31-bit and 64-bit) (RHEL4) + Update 1 (U1)
Note:
CCL connections via CDLC and Layer 2 will only be supported on kernel 2.6-based Linux
distributions. IBM is working with its Linux distribution partners to ensure that the functions
needed to exploit Communication Controller for Linux features will be provided in future
distribution releases or service updates. For the latest information, visit the following
Communication Controller for Linux Web site
In order to support Communication Controller for Linux on System z9 and
zSeries, VTAM must support activation of CCL NCPs that are directly
attached to the activating VTAM through an XCA major node (OSA). The
following VTAM APARs provide this function:
-
z/VM/VTAM V4R2 — APAR VM63677
-
VSE/VTAM V4R2 — APAR DY46311
-
OS/390® Communications Server V2R10 — APAR OA10425
-
z/OS Communications Server V1R2, V1R4, V1R5, and V1R6 — APAR OA10425
Planning information
Customer responsibilities:
For use with Communication Controller for Linux on System z9 and zSeries V1.2, there are
additional NCP products licensing considerations.
NCP licensing:
The customer must have a separate ACF/NCP license for each image of Communication Controller
for Linux on System z9 and zSeries.
For new ACF/NCP licenses:
-
Order ACF/NCP V7.8.1 Program number 5648-063.
-
Specify Tier 2 (#2801 for a basic license or #2809 for a DSLO license).
-
Refer to Software Announcement
201-169
, dated June 12, 2001, for detailed ACF/NCP and ACF/SSP ordering information.
For existing customers, ACF/NCP V7R5, and later, is supported in the Communication Controller for
Linux on System z9 and zSeries environment. To use an existing NCP license, contact your IBM
representative to transfer it to the system on which it will run and to ensure that your license is
at the required tier 2.
Certain CCL V1.2 functions rely on NCP code that supports the 3746-900. The customer must specify
the 3746-900 feature and tier C in the NCP generation, even though the 3746-900 is not being used.
For this use, it is not necessary to license a 3746-900 feature or an NCP Tier A, B, or C.
X.25 NPSI licensing:
The customer must have a separate X.25 NCP Packet Switching Interface (NPSI) license for each
image of CCL V1.2 where X.25 support is required. This is in addition to the license for NCP and
SSP.
For new NPSI licenses:
-
Order NPSI V3R9 (program number 5688-035).
-
Specify tier 2 (#4025 for a basic license or #6004 for a DSLO license).
For existing customers, X.25 NPSI V3R8 and R9 are supported in the CCL V1.2 environment. To use an
existing X.25 NPSI license, contact your IBM representative to transfer the license to the system on
which you will run X.25 NPSI and to ensure that your license is at the required tier 2.
ACF/SSP licensing:
An ACF/SSP must be available for configuring and downloading both ACF/NCP and X.25 NPSI when
used in CCL V1.2.
Packaging
Communication Controller for Linux on System z9 and zSeries ships with the following:
-
IBM International Program License Agreement (IPLA)
-
IBM IPLA Pointer Sheet
-
Product CD
Security, auditability, and control
The Communication Controller for Linux on System z9 and zSeries uses the security and auditability
functions features of the Linux operating system.
The customer is responsible for evaluation, selection, and implementation of security features,
administrative procedures, and appropriate controls in application systems and communication
facilities.
Back to top
This product is only available via Passport Advantage. It is not available as shrinkwrap.
Product information
Licensed Product
function title Product group category
IBM Communication App Integration App Integration
Controller for Middleware Middleware
Linux on System z9
and zSeries
PID Charge unit
Program name number description
IBM Communication 5724-J38 SubCapacity
Controller for Linux Processor
on System z9 and
zSeries
IBM Communication 5724-J38 Processors
Controller for Linux
on System z9 and
zSeries
IBM Communication 5724-J38 Processor
Controller for Linux Day
on System z9 and
zSeries
Charge metrics definitions
Processor
In Full Capacity charging — Proofs of Entitlement (PoEs) must be acquired for all activated
"processors" (available for use) that are on the server where the Program or a component of the
Program is run.
-
If there are Program Components included in the offering whose function is not to be included in the
charge metric, these must be listed in the Program-unique Terms of the License Information.
-
IBM defines a physical processor in a computer as a functional unit that interprets and executes
instructions. A physical processor consists of at least an instruction control unit and one or more
arithmetic and logic units.
-
Multi-core technology allows two or more processors (commonly called "cores") to be active on a
single silicon chip. Unless otherwise announced, with multi-core technology, IBM considers each
"core" to be a physical processor. For example, in a dual-core chip, there are two physical
processors residing on the single silicon chip.
-
In the zSeries Integrated Facility for Linux (IFL) environment, each IFL engine is considered a
single "physical processor."
-
Threading, a technique which makes a single processor seem to perform as two or more, does
not
affect the count of physical processors.
-
Where "blade" technology is employed, each "blade" is considered a separate server and charging is
based upon the total number of processors on the blade on which the Program is run.
"Per processor" charging under Sub-capacity (when available)
Required authorized use for eligible Programs is based upon the highest observed daily utilization
of the partitions where the Program or a component of the Program, executes during a reporting
period as measured by an IBM license management tool. IBM license management tool use is required
for your submission of periodic reports to IBM. For each sub-capacity eligible software Program,
the required authorized use is re-evaluated based upon the quarterly sub-capacity reports submitted
to IBM.
-
The number of authorizations you must acquire is the smaller value of either of the following
methods:
-
The total number of active (available for use) processors in the machine, or
-
The sum of (1) and (2) as follows (any remaining fraction of a processor must be rounded up to a
full processor in the final aggregation)
-
When a Program is run in partitions with dedicated processors, the sum of the Processing Units of
those partitions, and
-
When a Program is run in partitions that are members of a Shared Processing Pool, the smaller of:
The number of processors assigned to the pool, or
The sum of the Virtual Processors of each
Uncapped Partition plus the Processing Units in each Capped Partition running a Program.
-
z/VM Guest Charging
-
The total number of active (available for use) processors in the machine, or
-
The sum of (1) and (2) as follows (any remaining fraction of a processor must be rounded up to a
full processor in the final aggregation)
-
When a program is run in VM Guests with dedicated processors, the sum of the Integrated Facility for
Linux (IFL) engines of those VM Guests, and
-
When a program is run in VM Guests that are members of a Shared Processing Pool (z/VM), the smaller
of:
The number of processors assigned to the z/VM pool, or
The sum of the IFL engines in
each z/VM pool running a Program.
Notes:
-
IBM defines a physical processor in a computer as a functional unit that interprets and executes
instructions. A physical processor consists of at least an instruction control unit and one or more
arithmetic and logic units.
-
Multi-core technology allows two or more processors (commonly called "cores") to be active on a
single silicon chip. With multi-core technology, IBM considers each "core" to be a physical
processor. For example, in a dual-core chip, there are two physical processors residing on the
single silicon chip.
-
In the zSeries' Integrated Facility for Linux (IFL) environment, each IFL engine is considered a
single "physical processor".
-
Threading, a technique which makes a single processor seem to perform as two or more, does NOT
affect the count of physical processors
"Per managed processor" charging under Full Capacity
"Per Managed processor": Charges are based on the active processors on the machines in the computing
environment affiliated with the Program rather than on the server where the program is run. The
managed processors which require PoEs are defined both in the Charges section of the announcement or
the License Information's Program-unique terms.
Notes:
-
IBM defines a physical processor in a computer as a functional unit that interprets and executes
instructions. A physical processor consists of at least an instruction control unit and one or more
arithmetic and logic units.
-
Multi-core technology allows two or more processors (commonly called "cores") to be active on a
single silicon chip. With multi-core technology, IBM considers each "core" to be a physical
processor. For example, in a dual-core chip, there are two physical processors residing on the
single silicon chip.
-
The Program may
not run
on
some or all
of the processors for which PoEs are required by the Program's valuation method.
-
In the zSeries' Integrated Facility for Linux (IFL) environment, each IFL engine is considered a
single "physical processor".
-
Threading, a technique which makes a single processor seem to perform as two or more, does
not
affect the count of physical processors.
-
Where "blade" technology is employed, each "blade" is considered a separate server and charging is
based upon the total number of processors on the blades with which the Program is affiliated.
Passport Advantage program licenses
IBM Communication Controller for Linux
Part
Part description number
IBM Communication Controller for
Linux on System z9 and zSeries
Comm Controller for Linux Processors D54SSLL
License & SW Maint 12 Months
Comm Controller for Linux Processors E01P1LL
SW Maint. Annual Renewal
Comm Controller for Linux Processors D54STLL
SW Maint. Reinstatement 12 Months
Passport Advantage supply
Part
Program name/description number
Comm Controller for Linux V1.2.0
Media Pack English International Linux BM03GIE
for zSeries Enterprise Servers
(Mainframes) CD ROM Digital Disk --
ISO 9660 Standard V1.2.0
Passport Advantage customer: media pack entitlement details
Customers with active maintenance or subscription for the products listed are entitled to receive
the corresponding media pack.
Comm Controller for Linux V1.2.0
Entitled
maintenance
offerings Media packs Part
description description number
Communication Comm Controller for BM03GIE
Controller Linux English
Linux on International Linux
z9/zSeries for zSeries
Processor Enterprise Servers
(Mainframes) CD ROM
Digital Disk -- ISO
9660 Standard
Communication Comm Controller for BM03GIE
Controller Linux English
Linux on International Linux
z9/zSeries for zSeries
SubCap Proc Enterprise Servers
(Mainframes) CD ROM
Digital Disk -- ISO
9660 Standard
Sub-capacity
IBM Communication Controller for Linux on System z9 and zSeries
Part
Part description number
Comm Controller for Linux SubCapacity D55T6LL
Proc License & SW Maint. 12 Months
Comm Controller for Linux SubCapacity E024GLL
Proc SW Maint. Annual Renewal
Comm Controller for Linux SubCapacity D55T7LL
Proc SW Maint. Reinstatement 12 Mo
On/Off Capacity on Demand
IBM Communication Controller for Linux on System z9 and zSeries
Part
Part description number
Comm Controller for Linux Proc Day Per D54SULL
Use-DAY, On Off Capacity on Demand
Back to top
This product is only available via Passport Advantage. It is not available as shrinkwrap.
Licensing:
IBM International Program License Agreement. Proofs of Entitlement (PoE) are required for all
authorized use.
Part number products only, offered outside of Passport Advantage, where applicable, are license only
and do not include Software Maintenance.
License information form number
Program
Program name number Form number
IBM Communication 5724-J38 L-LCOX-66ML8E
Controller for Linux
Limited warranty applies:
Yes
Money-back guarantee:
If for any reason you are dissatisfied with the Program and you are the original licensee,
return it within 30 days from the invoice date, to the party (either IBM or its reseller) from whom
you acquired it, for a refund.
-
For Programs acquired under the IBM International Passport Advantage offering, this term applies
only to your first acquisition of the Program.
-
For Programs acquired under any of IBM's On/Off Capacity on Demand (On/Off CoD) software
offerings,this term does not apply since these offerings apply to Programs already acquired and in
use by the customer.
Copy and use on home/portable computer
Copy and use on
home/portable
Product name computer?
IBM Communication No
Controller for Linux
Volume orders (IVO):
No
Passport Advantage applies
Yes, and through the Passport Advantage Web site at
Usage restriction:
Yes
The Communication Controller for Linux on System z9 and zSeries program
may be installed on a System z9 or zSeries, in either a general purpose
processor (CP) or an Integrated Facility for Linux (IFL), or both. If
the program is installed on a CP, a PoE must be acquired for each engine
that makes up the CP. If the program is installed on a IFL, a PoE must
be acquired for each engine that makes up the IFL. If the program is
installed on both a CP and an IFL, a PoE must be acquired for each engine
that makes up both the CP and IFL together.
IBM operational support services — support line:
No
iSeries™ Software Maintenance applies:
No
Educational allowance available:
Not applicable
On/Off capacity on demand
To be eligible for On/Off Capacity on Demand pricing, customers must be enabled for temporary
capacity on the corresponding hardware, and the required contract — Z125-6907, Amendment for
iSeries and pSeries® Temporary Capacity On Demand — Software — must be signed prior to use.
Back to top
Passport Advantage
For Passport Advantage information and charges, contact your IBM representative or authorized IBM
Business Partner. Additional information is also available at
Back to top
To order, contact the Americas Call Centers, your local IBM
representative, or your IBM Business Partner.
To identify your local IBM representative or IBM Business Partner, call
800-IBM-4YOU (426-4968).
Phone: 800-IBM-CALL (426-2255)
Fax: 800-2IBM-FAX (242-6329)
Internet: callserv@ca.ibm.com
Mail: IBM Americas Call Centers
Dept. Teleweb Customer Support, 9th floor
105 Moatfield Drive
North York, Ontario
Canada M3B 3R1
Reference: YE001
The Americas Call Centers, our national direct marketing organization,
can add your name to the mailing list for catalogs of IBM products.
Note:
Shipments will begin after the planned availability date.
Trademarks
-
-
System z9 and iSeries are trademarks of International Business Machines
Corporation in the United States or other countries or both.
-
-
Passport Advantage, zSeries, the e-business logo, VTAM, z/OS, z/VM,
S/390, SP2, OS/390, and pSeries are registered trademarks of
International Business Machines Corporation in the United States or other
countries or both.
-
-
Java is a trademark of Sun Microsystems, Inc.
-
-
Linux is a trademark of Linus Torvalds in the United States, other
countries or both.
-
-
Other company, product, and service names may be trademarks or service
marks of others.
At a glance
