IBM CICS VSAM Recovery V3.3 for z/OS adds batch backout capability to the VSAM forward recovery process

IBM United States Software Announcement 204-187
August 17, 2004

 

 ENUS204-187.PDF (60KB)

Table of contents   Document options  
At a glance Offering information
Overview Publications
Key prerequisites Technical information
Planned availability date Ordering information
Description Terms and conditions
Accessibility by people with disabilities Prices
Product positioning Order now
 
Printable version

 
At a glance

CICS VR V3.3 introduces changes that increase the overall recovery capability, and improve the management and usability of the recovery process by:

  • Removing updates made to VSAM spheres by failed batch job steps (batch backout).
  • Allowing CICS VR to be notified of logical backups created for VSAM data sets made by almost any backup product (IBM or non-IBM).
  • Adding various usability enhancements to the CICS VR panel interface and server address space.

For ordering, contact:

Your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at 800-IBM-CALL (Reference: LE001).
 
Back to top
 

Overview

CICS® VSAM Recovery (CICS VR) V3 lets you recover CICS and batch VSAM data after physical or logical corruption. V3.3 greatly extends the value of CICS VR by including additional recovery and backup capabilities, along with numerous usability enhancements.

Included in CICS VR V3.3:

  1. A new batch backout feature allows all updates made by a failed batch job step to be removed (backed out) from the affected VSAM data sets. Optionally, CICS VR can perform the backout of VSAM sphere updates automatically when a batch job step fails. This feature will allow you to recover quickly from batch processing errors, decreasing the chances that batch processing will exceed its allowed time frame (batch window).
  2. A new general file copy notification service allows CICS VR to be notified of logical backups created for VSAM data sets by almost any backup product (IBM or non-IBM).
  3. Usability enhancements have been made within the following functions:
    • Grouping
    • Backups
  4. Features have been added to keep the CICS VR server address space available 24 x 7.
  5. Disaster recovery utilities are enhanced so they allow further control over the items that are sent to the remote recovery site.

CICS VR is a member of the CICS Tools family.
 
Back to top
 

Key prerequisites
  • z/OS® 1.3, or later (5694-A01)


 
Back to top
 

Planned availability date

September 24, 2004
 
Back to top
 

Description

CICS VSAM Recovery (CICS VR) V3 is an automated recovery tool that helps you recover from loss of VSAM data due to catastrophic hardware failure, software failure, or human error.

CICS VR uses logs to recover your VSAM data. It supports:

  • MVS™ system logger log streams
  • CICS VR SAM copies of MVS system logger log streams

CICS VR V3 offers extensive improvements over the previous version, resulting in a world class recovery tool. As well as providing new function, such as change accumulation, recovery automation, and improved remote site recovery for existing CICS users, CICS VR V3 can be used with batch applications. CICS VR VSAM batch logging can record updates to VSAM spheres made by batch applications. If the VSAM spheres are lost or damaged, CICS VR can use the log records to recreate the spheres. If a batch job fails, CICS VR can remove the updates that were made to the VSAM spheres by the failed job step.

With the increasing reliability of enterprise hardware and with stable enterprise software systems, catastrophic loss of data is a rare event. Nevertheless, for most enterprises the residual risk of loss is unacceptable. With careful planning, good operational procedures, and the services of CICS VR, you can eliminate almost all risk.

CICS VR can also perform a selective recovery of VSAM data sets. You can specify which log records you want applied during recovery processing by specifying the appropriate identifiers (file, terminal, and transaction). For example, you can create a recovery job that will not apply any log records produced from a particular transaction. The resulting data set would, therefore, have all updates made by the specified transaction removed.

User-friendly dialog interface: CICS VR is designed to help you recover lost or damaged VSAM data sets, using a CICS VR Interactive System Productivity Facility (ISPF) dialog. You navigate through the dialog panels, selecting spheres you want to recover and backups you want to use. Behind the scenes, CICS VR executes utilities such as LOGOFLOGS SCAN to get the latest information on the VSAM spheres from CICS. Then the dialogs generate a recovery job that you can submit when you are ready. The CICS VR dialogs supply all the details (for example, VSAM spheres, and backups) and you select those you want. By simply accepting the default parameters that CICS VR displays on the panels, you create a job that restores each sphere from its latest registered backup and then performs a forward recovery up to the current date and time.

Usability enhancements in CICS VR V3 allow you to customize the system so that you can filter the information you see, making it easier to manage the recovery process. You can define in detail which data you want recovered, for example, records for a particular terminal ID, transaction ID, or file ID.

If you do not want to use the latest backup, you can get a list of all known backups for the sphere and select the backup that you want. You can use a group function to group data sets according to your own criteria. For example, you can group VSAM spheres according to volume, CICS APPLID, and so on, so you can manage the backup and recovery of VSAM spheres as a unit.

Backup management support: CICS VR currently can be notified of relevant DFSMShsm™ and DFSMSdss™ logical backup information for VSAM data sets. These backups can then be selected for restore through the CICS VR panel interface. In addition, CICS VR can automatically deregister the backups when associated log information has been deleted. Now CICS VR V3.3 has a new general file copy notification service. This service allows you to notify CICS VR about information for logical backups created for VSAM data sets by almost any backup product (IBM or non-IBM).

A post general availability CICS VR enhancement will exploit the new general file copy notification service to allow for the information about all backups that CICS VR receives through the notification service to be automatically registered to CICS VR. This enhancement will also allow the registered backups to be displayed through the CICS VR panel interface. When selected, CICS VR will use the proper user-specified restore JCL skeleton to restore the backup and then perform a proper forward recovery.

Support for batch updates: CICS VR V3 can provide support for batch data sets as well as online data sets. This support requires that all systems are running as a sysplex, with the LOGR policy defined. When enabled, it provides logging for VSAM data sets that are not currently in use by other applications. Variations of CICS VR batch logging allow you to forward recover batch updates, remove batch updates, or both.

CICS VR VSAM batch logging calls the system logger to write the log records to the MVS system logger's log stream. The system logger has a common logging facility for all z/OS and OS/390® images providing greater 24x7 availability in the event that an image fails. The coupling facility enables logging from throughout the sysplex to be directed to a common log stream, if desired. In addition, CICS VR VSAM batch logging is invoked automatically and does not require any changes to be made to your batch jobs.

CICS VR forward recovery logging writes a log record after every update made by a batch job. Therefore, if a VSAM sphere becomes corrupted, CICS VR can use the log records to return a VSAM sphere back to its existing state before the corruption occurred.

CICS VR undo logging (new in CICS VR V3.3) writes a log record before every update made by a batch job. Therefore, if a step in a batch job fails, CICS VR can use the log records to remove the updates made by the failed batch job step.

CICS VR can perform forward recovery logging, undo logging, or both for your VSAM spheres.

Reducing recovery time: CICS VR V3 includes a change accumulation feature which significantly reduces the time it takes to forward recover a VSAM sphere. After a backup has been made for a sphere, you can set up a change accumulation batch job so that it is submitted at regular intervals by a workload management product such as Tivoli® Workload Scheduler (5698-WKB). The change accumulation batch job consolidates the forward recovery log records into a change accumulation data set. Then, when a forward recovery is needed, the change accumulation data set can be used in place of the forward recovery log stream. CICS VR needs to use the forward recovery log stream only to get the most recent log records (the records that have not yet been consolidated by the change accumulation batch job).

Remote site recovery: CICS VR V3 provides a set of utilities to aid with disaster recovery. These utilities (log stream copy, disaster recovery change accumulation, RCDS EXPORT/IMPORT, shadow processing) are designed to add VSAM recovery into your current disaster recovery process without requiring you to restructure your overall plan.

Depending on your disaster recovery requirements, you can choose to use an appropriate set of the available CICS VR disaster recovery utilities.

What's new in V3.3

V3.3 greatly extends the value of CICS VR with additional recovery and backup capabilities, along with numerous usability enhancements.

  1. A new batch backout feature allows all updates made by a failed batch job step to be removed (backed out) from the affected VSAM data sets. Optionally, CICS VR can perform the backout of VSAM sphere updates automatically when a batch job step fails. This feature allows you to quickly recover from batch processing errors, therefore decreasing the chances that batch processing will exceed its allowed time frame (batch window).
  2. CICS VR V3.1 made it possible for CICS VR to be notified of relevant DFSMShsm and DFSMSdss logical backups created for VSAM data sets. These backups can be selected for restoration through the CICS VR panel interface. In addition, CICS VR can automatically deregister the backups when associated log information has been deleted.

    In CICS VR V3.3, you get a more general file copy notification service. This allows you to notify CICS VR about logical backups created for VSAM data sets by almost any backup product (IBM or non-IBM). The CICS VR general file copy notification service can be invoked by:

    • A VSAM backup product that has been designed to use the new CICS VR notification interface.
    • A job step added by a user to an existing batch job that drives almost any VSAM backup utility.

    At general availability, CICS VR V3.3 will include base function that enables the user to call the notification service. Subsequently, IBM will provide CICS VR enhancements through the Service channel that will make full use of the notification data. These enhancements will provide:

    • Automatic registration in the CICS VR recovery control data set (RCDS) of the backup information CICS VR receives through the notification interface
    • Display of all registered backups through the CICS VR panel interface for user selection during recovery
    • Automatic restoration of any selected backup by using an appropriate user-specified restore JCL skeleton as part of the recovery process

    The enhanced interface makes it possible to receive notification of (and view in the panel interface) backups produced by IBM's CICS VSAM Copy utility (program number 5655-L66).

  3. Usability enhancements have been made to the following functions:
    • Grouping
      • A new instance identifier filter provides the grouping of VSAM spheres according to the CICS APPLID, TVSNAME, or CICS VR server address space identifier associated with the instances that updated the spheres.
      • CICS VR grouping is enhanced to allow groupings of VSAM spheres listed in members of partitioned data sets to be processed by the CICS VR panel interface.
    • Backups
      • The time stamp of all backups registered to CICS VR will be displayable in both GMT and local time formats throughout the CICS VR panel interface.
      • Enhanced backup deregistration options are added to the CICS VR panel interface.
  4. CICS VR server address space
    • Features to keep the CICS VR server address space available 24x7 have been added, including the ability to maintain the RCDSs without terminating the CICS VR server address space.
    • In a sysplex environment, multiple instances of CICS VR now can be grouped into cross system coupling facility (XCF) groups, allowing proper communication and organization among the instances in the groups. CICS VR XCF groups might be used to keep production data and activity completely separate from testing data and activity.
  5. Disaster recovery
    • Existing disaster recovery utilities are enhanced to allow further control over the items that are sent to the remote recovery site.

CICS VR V3.3 continues to build upon the rich function of V3. New function increases the overall VSAM management capabilities while usability enhancements continue to make CICS VR a simple and straightforward product to use.
 
Back to top
 

Accessibility by people with disabilities

CICS VR has been tested for use by people with visual impairment using the Jaws screen reader and IBM Personal Communications terminal emulator. HTML versions and alternate text of the CICS VR manuals will be available for download.

Section 508 of the U.S. Rehabilitation Act

The following features support use by people with disabilities:

  • Operation by keyboard alone
  • Optional font enlargement and high-contrast display settings
  • Screen readers and screen magnifiers tested for use by people with visual impairment
  • Suitable for people with hearing impairment

Softcopy PDF and BookManager® documentation is shipped with the product. PDF documentation supports optional font enlargement, high-contrast display settings, and may be operated by the keyboard alone. Alternative text will be provided for unsuitable diagrams and HTML versions of the CICS VR manuals will be available for download.

Value Unit based pricing

Value Unit based pricing will help align the prices of these products to the principle of the PSLC pricing curve, which provides for a lower price per MSU (millions of service units per hour) for larger capacities.

There is also a price benefit when customers grow their capacity. Additional capacity will be based on the number of Value Units (MSUs) the customer has already installed; for example, additional capacity will not be priced starting at the base with a higher price per unit but on the capacity that is already installed.

Note that Value Units of a given product cannot be exchanged, interchanged, or aggregated with Value Units of another product.

IPLA and Subscription and Support considerations

IPLA licenses can be transferred from one machine to another within, but not limited to an enterprise. The customer may aggregate the capacity for all the processors the product is operated on to achieve a more economic price. This will result in a single Proof of Entitlement. It is the customer's responsibility to manage the distribution of Value Units within the limits of the entitlement of the product license.

Subscription and Support must cover the same capacity as the product license entitlement. Subscription and Support will be available in the country in which the agreement is made.
 
Back to top
 

Product positioning

CICS VSAM Recovery is IBM's VSAM recovery tool for the OS/390 environment. In the event of failure that results in loss of data, CICS VR can recover lost CICS Transaction Server VSAM data to the state that existed before the damage was done. CICS VR can also recover VSAM data that was updated through batch applications using the CICS VR VSAM batch logging feature. CICS VR is for organizations where the availability and integrity of VSAM data is vital.

Trademarks

 
MVS, DFSMSdss, and DFSMShsm are trademarks of International Business Machines Corporation in the United States or other countries or both.
 
CICS, z/OS, OS/390, Tivoli, and BookManager are registered trademarks of International Business Machines Corporation in the United States or other countries or both.
 
Other company, product, and service names may be trademarks or service marks of others.

 
Back to top
 
Offering information

Product information is available via the Offering Information Web site


 
Back to top
 
Publications

The Program Directory is the only publication shipped with this product.

Title                                   Order number
 
CICS(R) VR V3.3 Program                 GI11-1232
 Directory

Displayable softcopy publications

The following CICS VR books are available. These are offered only in displayable softcopy form, in PDF, HTML, and BookManager® formats.

                                                  Order
Title                                             number
 
CICS VR V3.3 Messages and Problem                 SH26-4128
 Determination
CICS VR V3.3 User's Guide                         SH26-4127
CICS VR V3.3 Implementation Guide                 SH26-4126
 and Reference
CICS VR V3.3 Program Directory                    GI11-1232

These publications are available free of charge to read or download by visiting the IBM Publications Center Portal at

The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided. Furthermore, a large number of publications are available online in various file formats, which can currently be downloaded free of charge.

Also from this site, you can register for the Publications Notification System (PNS). This system is available by order number/product number, and customers subscribing to PNS will automatically receive notifications by e-mail of publication updates.

The CICS VR books will also be available in BookManager softcopy format on the following CD-ROMs. These CD-ROMs are updated and reissued at regular intervals so they will not contain the new CICS VR V3.3 books immediately at the time of initial product availability.

 
                                                  Order
Title                                             number
 
IBM Transaction Processing and                    SK2T-0730
 Data Collection
z/OS(R) Software Products Collection              SK3T-4270

These displayable manuals can be used with the BookManager READ licensed programs in any of the supported environments. Terms and conditions for use of the machine readable files are shipped with the files.

Licensed documentation: None

Redbook: The CICS VR Usage Guide Redbook, SG24-7022-00, which was written for CICS VR V3.2, is available.
 
Back to top
 

Technical information

Specified operating environment

Hardware requirements

CICS VR V3.3 executes on any S/390® or IBM eServer zSeries® processor that supports the required release of z/OS.

A tape or cartridge unit, and a direct access storage device that is supported by z/OS is required.

For Concurrent Copy support, an IBM Enterprise Storage Server™ or equivalent is required.

For RLS mode support, a Coupling Facility is required.

There is no change in 24-Bit Real or Virtual storage from the previous release; CICS VR V3.3 requires a minimum of 4 MB of virtual storage below the 16 MB line.

Software requirements

CICS VSAM Recovery V3.3 runs on z/OS V1.3 (5694-A01), or later.

The following DFSMS dependency APARs at z/OS V1.3 are required for CICS VR V3.3 backout function:

  • OA07286
  • OA07287
  • OA07288
  • OA07289
  • OA07290
  • OA07602

The following DFSMS APARs at z/OS V1.3, or later are required for V3.3:

  • OA04114
  • OA04115

The following CICS Transaction Server APARs are required to take advantage of the CICS VR VSAM batch logging function:

For CICS TS V1.3 (5655-147):

  • PQ50900

For CICS TS V2.2 (5697-E93):

  • PQ50901

DFSORT™ V1R14 with APAR PQ42845 is required to use change accumulation if any log records are greater than 42,500 bytes.

Compatibility: CICS VSAM Recovery V3.3 is not supported for use with CICS/ESA® V4.1. While function shipped in a prior release of CICS VR may still operate with CICS/ESA V4.1, CICS VR is not supported within this environment. None of the new CICS VR V3.3 features have been tested with or are supported for use with CICS/ESA V4.1

If you are migrating from an earlier level of CICS VR, you should perform some migration actions, including a conversion of the RCDS. These migration actions should be performed when you have successfully completed SMP/E APPLY and ACCEPT of CICS VR.

Users migrating from CICS VR V3.1 or V3.2

Users who are moving from CICS VR V3.1 or CICS VR V3.2 to CICS VR V3.3 must run the CICS VR 3.3 migration utility to convert the CICS VR V3.1 or CICS VR V3.2 RCDS to the CICS VR V3.3 RCDS format.

Existing CICS VR V3.1 or V3.2 customers who have the CICS VR address space active will have to perform the following additional steps before activating each instance of the CICS VR V3.3 address space:

  • Specify a CICS VR XCF group suffix in member IGDSMSxx of SYS1.PARMLIB
  • Specify an RCDS prefix in member IGDSMSxx of SYS1.PARMLIB
  • Rename the existing RCDSs that were defined to the older version of the CICS VR address space to include the newly defined RCDS prefix and XCF group suffix
  • Rename the existing data set that was allocated to the DWWMSG ddname to include the newly defined CICS VR XCF group suffix

Users migrating from CICS VR V2.3

It is recommended that users of CICS VR V2.3 who wish to convert their RCDS to CICS VR V3.3 format migrate to CICS VR V3.2 or convert their RCDS to CICS VR V3.2 format using the CICS VR V3.2 migration utility before moving to CICS VR V3.3.

To maintain the existing forward recovery capability for VSAM spheres, when migrating from CICS VR/MVS™ V2.3 to CICS VR V3, you must make minor changes to the JCL jobs and error exits. Refer to the CICS VR Implementation Guide and Reference for more information on the migration utility.

Users migrating from CICS VR releases prior to V2.3

If you are migrating to CICS VR V3 from a release prior to CICS VR V2.3, refer to Chapter 4 in the CICS VR MVS/ESA™ Implementation Guide and Reference V2.3 for information.

Users migrating from another recovery product or no previous recovery product

If you are a new CICS VR user, there are no additional steps other than those required for installation and setup when migrating to CICS VR. CICS VR records all necessary recovery information from the log of logs and during CICS VR VSAM batch logging automatically. In addition, backups are automatically registered to CICS VR when information about the backups is received through the file copy notification service.

General compatibility information

CICS VR V3 is upwardly compatible with CICS VR V2.3.

CICS VR V3 supports CICS Transaction Server V1 and V2 forward recovery logs. CICS VR also supports forward recovery of a VSAM data set from log records produced by CICS TS autojournaling (CICS VR V3.2 APAR PQ78318). However, IBM strongly recommends only using the CICS TS forward recovery logs for forward recovery.

CICS VR V3 and CICS VR V2.3 can coexist in the same OS/390® or z/OS system if they have different RCDS data sets and are in separate libraries.

Planning information

Packaging

CICS VR V3.3 is shipped on the following media for the basic object material:

  • 3480 1/2-in Data Cartridge — 34K bpi uncompressed

Also shipped with the product are:

  • IBM Program License Agreement (IPLA) in multilanguage booklet, Z125-3301
  • License Information for CICS VR in multilanguage booklet, GC26-7458-02
  • Proof of Entitlement (PoE)
  • Program Directory for CICS VR, GI11-1232

Security, auditability, and control

Program users may wish to employ the security and auditability features of Resource Access Control Facility (RACF®) to control the use of CICS VR. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communication facilities.
 
Back to top
 

Ordering information

CICS VR V3.3 is licensed under the IBM International Program License Agreement (IPLA). It has a single OTC based on Value Units for program usage, and an annual recurring charge for enhanced support that includes telephone assistance, service, and future product updates (enhancements and new versions or releases).

CICS VSAM Recovery V3.3 replaces CICS VSAM Recovery V3.2, which will no longer be available after the general availability of CICS VSAM Recovery V3.3.

The ordering information for CICS VSAM Recovery V3.3 is unchanged from that previously announced for CICS VSAM Recovery V3.1, Software Announcement 201-372 , dated December 18, 2001.

Value Unit exhibit VUE007

                 MSUs               MSUs               Value
                 minimum            maximum            Units/MSU
 
Base               1                  3                1
Tier A             4                 45                0.45
Tier B            46                175                0.36
Tier C           176                315                0.27
Tier D           316                  +                0.2

Value Units for non MSU-based S/390 processors:

                                 Value
                                 Units/
Hardware                         machine
 
MP3000 H30                        6
MP3000 H50                        8
MP3000 H70                       12
ESL Models                        2

Ordering example:

The total number of Value Units is calculated according to the following example.

If the customer has installed 1,500 MSUs, the applicable Value Units would be:

Translation from MSUs to Value Units

                                   Value
                                   Units/                 Value
             MSUs         *        MSU           =        Units
 
Base             3        *        1.00          =          3.00
Tier A          42        *         .45          =         18.90
Tier B         130        *         .36          =         46.80
Tier C         140        *         .27          =         37.80
Tier D       1,185        *         .20          =        237.00
 
Total        1,500                                        343.50

When calculating the total number of Value Units, the sum is to be rounded up to the next integer.

Example: In the above ordering example, for the product running on a machine with 1,500 MSUs requiring 344 Value Units, order feature number S00W79Z.

Ordering z/OS through the Internet

ShopzSeries provides an easy way to plan and order your z/OS ServerPac or CBPDO. It will analyze your current installation, determine the correct product migration, and present your new configuration based on z/OS. Additional products can also be added to your order (including determination of whether all product requisites are satisfied). ShopzSeries is available in the U.S. and several countries in Europe. In countries where ShopzSeries is not available yet, contact your IBM representative (or IBM Business Partner) to handle your order via the traditional IBM ordering process. For more details and availability, visit the ShopzSeries Web site at

                              Medium
                  Program     feature
Description       number      number    Medium
 
Per Value Unit    5655-H91    5802      3480 tape cartridge
Per Value Unit    5655-H93    6606      paper

The products in this announcement have one charge unit — Value Units.

Value Units for IBM 9672 processors will be based upon the full capacity of these systems. This is applicable to all S/390-based systems that are measured on MSU capacity. Information on MSU capacities can be found in the IBM System/370™, System/390®, and zSeries Machine Exhibit, Z125-3901.

Value Units for zSeries will be based upon full MSU capacity as defined in the Machine Exhibits.

A tool will be available that provides support for transforming the MSU-based capacities of S/390 systems to new Value Units by calculating the applicable number of Value Units for a given number of MSUs.

Basic license: To order, specify the program number, feature number 9001 for asset registration, and the OTC feature number. Also specify the feature number of the desired distribution medium. To suppress shipment of media, select the license-only option in CFSW.

                                    OTC
                          Program   feature
Description               number    number
 
CICS VSAM Recovery V3.3   5655-H91
 
 Entitlement Entity                 S00W79Z

Subscription and Support

To receive voice technical support via telephone during normal business hours, and future releases and versions at no additional charge, order Subscription and Support. The capacity of Subscription and Support (Value Units) must be the same as the capacity ordered for the product licenses.

To order, specify the support program number, 5655-H93, and feature number 9001 for asset registration. IBM is also providing subscription and support for these products via a separately purchased offering under the terms of the IBM International Agreement for Acquisition of Support (IAAS). This offering:

  • Includes and extends the support services provided in the base support to include technical support via telephone during normal business hours.
  • Entitles customers to future releases and versions at no additional charge. Note that the customer is not entitled to new products.

Once Subscription and Support is ordered, the charges will renew automatically annually unless cancelled by the customer.

                                    Annual
                                    support
                                    charge
 
                          Program   feature
Description               number    number
 
CICS VSAM Recovery        5655-H93
- Software Subscription
  and Support
 
 Entitlement Entity                 S00W7B5

Single version charging: To elect single version charging, the customer must notify and identify to IBM the prior program and replacement program and the machine the programs are operating on.

On/Off Capacity on Demand

Program             Feature
number              number         Description
 
5655-H91            S00W79Z        Entitlement Entity,
                                    CICS VSAM Recovery

Customized offerings

Product media is shipped only via Customized Offerings (for example, CBPDO, ServerPac, Systempac®). Non-customized items (CDs, diskettes, source media, media kits) will continue to be shipped via the stand-alone product.
 
Back to top
 

Terms and conditions

Licensing: IBM International Program License Agreement. Proofs of Entitlement (PoE) are required for all authorized use.

These products are licensed under the IBM Program License Agreement (IPLA), and the associated Agreement for Acquisition of Support, and the Addendum for Support (Z125-6435) which provides for support with ongoing access to releases and versions of the program. These programs have a one-time license charge for use of the program and an ongoing recurring charge for the enhanced support that includes telephone assistance (voice support for defects during normal business hours) as well as access to updates, releases, and versions of the program while support is in effect. S/390 and zSeries IBM Operational Support Services — Support Line is an option for those customers who desire added services.

Limited warranty applies: Yes

Warranty: This program has warranty for a minimum of one year from acquisition from IBM or authorized IBM Business Partner. The warranty provided to the customer, for at least one year from acquisition, is access to databases (read Web sites) for program information and FAQs, including any known fixes to defects, which the customer can download or obtain otherwise and install at leisure.

Program support: Enhanced support, called Subscription and Support, includes telephone assistance (voice support for defects during normal business hours) as well as access to updates, releases, and versions of the program as long as support is in effect. The customer will be notified of discontinuance of support with 12 months' notice.

Money-back guarantee: If for any reason you are dissatisfied with the program, return it within 30 days from the invoice date, to the party (either IBM or its reseller) from whom you acquired it, for a refund. This applies only to your first acquisition of the program.

Copy and use on home/portable computer: No

Volume orders (IVO): No

Passport Advantage® applies: No

Software Maintenance applies: No

For operating system software, the revised IBM Operational Support Services — SoftwareXcel offering will provide support for those operating systems and associated products that are not available with the newly announced Software Maintenance offering. This will ensure total support coverage for your enterprise needs, including IBM and selected non-IBM products. For complete lists of products supported under both the current and revised SoftwareXcel offering, visit

For additional information on the revised IBM Operational Support Services, refer to Services Announcement 601-023 , dated July 10, 2001.

IBM Operational Support Services — SoftwareXcel: Yes

AIX®/UNIX® Upgrade Protection applies: No

Entitled Upgrade for current AIX/UNIX Upgrade Protection licensees: No

iSeries™ Software Subscription applies: No

Variable charges apply: No

Educational allowance available: Yes, 15% education allowance applies to qualified education institution customers.

Replaced programs:
 
Program
number                   Program name
 
5685-009                 CICS VSAM Recovery/MVS V1
5695-010                 CICS VSAM Recovery/MVS/ESA V2
 
Replacement program:
 
Program
number                   Program name
 
5655-H91                 CICS VSAM Recovery V3

Sub-capacity charges terms and conditions

IBM eServer zSeries software charges at less than full machine capacity for eligible tools apply when z/OS is running in z/Architecture™ (64 bit) mode on a zSeries 900, no other MVS-based operating system is licensed to that server and the required information is provided by the customer in accordance with the applicable terms.

Sub-capacity charges for an eligible tool is based on the z/OS product defined capacity. To obtain charges at less than full machine capacity for eligible tools, the customer is required to:

  • Determine the MSUs needed for each machine on which the tools will run. Only machines on which the customer has implemented sub-capacity Workstation License Charges (WLC) according to the above terms and conditions, are eligible for charges at less than full machine capacity for the tools.
  • Use the product defined capacity for z/OS (as specified on the Sub-Capacity Reports submitted to IBM for sub-capacity WLC) as the sub-capacity (MSUs) for each tool.
  • Submit any additional MSUs and/or Value Units required for each product along with the current entitlement in Value Units for each product.

Sub-capacity charges for tools

To be eligible for sub-capacity charges for tools, the machine on which the tools are running must be eligible for WLC sub-capacity charges terms and conditions. The customer must have signed the Attachment for zSeries Workload License Charges-Pre-ILM, Z125-6516, and submitted at least one Sub-Capacity Report to IBM as defined in the attachment.

With sub-capacity charges, the charge for an eligible tool is based on the z/OS product defined capacity. To obtain charges at less than full machine capacity for each eligible tool for each machine, the customer should:

  • Determine the MSUs needed for the machine on which the tools will run. In a data sharing environment, determine the aggregate MSUs needed on the machine where the tools run. Use the product defined capacity (MSUs) for z/OS (as specified on the Sub-Capacity Reports submitted to IBM for sub-capacity WLC) as the sub-capacity (MSUs) for each tool.
  • Submit any additional MSUs and/or Value Units required for each product along with the current entitlement in Value Units for each product.
  • If the use of sub-capacity pricing terms for tools results in a reduced requirement for Value Units, thus freeing up entitlements, customers can reallocate the entitlement difference by distributing the Value Units across a larger or different set of systems, or reserve them for future growth. There will be no refunds for these freed up Value Units. Subscription and Support volumes and entitlements for existing contracts will continue to be at the same levels as the acquired licenses.

Management of the Value Unit entitlements continues to be a customer responsibility. If one of the following occur on a machine to which tools are licensed, the customer must determine if additional Value Units and Subscription and Support need to be ordered for those tools to cover the increase:

  • The z/OS defined capacity is increased.
  • The requirements for WLC sub-capacity charges are no longer met.

Sub-capacity utilization determination

Sub-capacity utilization is determined based on the utilization of a sub-capacity eligible parent program and machine.

Sub-capacity parent programs

  • IBM CICS Transaction Server for z/OS V2.1 or later (5697-E93)
  • IBM CICS Transaction Server for OS/390 V1.1 or later (5655-147)
  • IBM CICS/ESA V4.1 (5655-018)

On/Off Capacity on Demand

To be eligible for On/Off Capacity on Demand pricing, customers must be enabled for temporary capacity on the corresponding hardware, and the required contract — Z125-6611, Attachment for Customer Initiated Upgrade and IBM eServer® On/Off Capacity on Demand — Software — must be signed prior to use.
 
Back to top
 

Prices

The prices for CICS VSAM Recovery V3.3 are unaffected by this announcement. For price information, refer to the announcement of CICS VSAM Recovery V3.1, Software Announcement 201-372 , dated December 18, 2001.

IBM Global Financing

IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Offerings include financing for IT acquisition, including hardware, software, and services, both from IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit

IBM Global Financing offerings are provided through IBM Credit LLC in the United States and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice. IBM Global Financing makes it easier for you to acquire the technology you need, faster.

As you implement complex business solutions such as e-business transformation, enterprise resource planning, supply chain management, business intelligence and customer relationship management, financing offerings from IBM Global Financing can help you control expenses, match cash flow to business benefits, and conserve cash for other strategic investments. For more information, visit

For more financing information, visit


 
Back to top
 
Order now

To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner.

To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).

 Phone:     800-IBM-CALL (426-2255)
 Fax:       800-2IBM-FAX (242-6329)
 Internet:  ibm_direct@vnet.ibm.com
 Mail:      IBM Americas Call Centers
            Dept:  IBM CALL, 11th Floor
            105 Moatfield Drive
            North York, Ontario
            Canada M3B 3R1
 
 Reference: LE001

The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.

Note: Shipments will begin after the planned availability date.

Trademarks

 
Enterprise Storage Server, DFSORT, MVS, MVS/ESA, System/370, iSeries, and z/Architecture are trademarks of International Business Machines Corporation in the United States or other countries or both.
 
The e-business logo, CICS, BookManager, z/OS, S/390, zSeries, CICS/ESA, OS/390, RACF, System/390, Systempac, Passport Advantage, AIX, and eServer are registered trademarks of International Business Machines Corporation in the United States or other countries or both.
 
UNIX is a registered trademark of the Open Company in the United States and other countries.
 
Other company, product, and service names may be trademarks or service marks of others.

Back to top
 

 
Printable version